BG-FT004
Mini Steam Train
Specifications
Dimension: L 236” x W 118” x H 108”
Weight: 1,102 lbs
Voltage: 110V/220V
www.barrongames.com
• Do not step into the track when train is motion.
• There is a sensor to stop the train if anything gets in the way of the train.
• Do not shake the train cars while in motion.
• No food or drink allowed in the train cars.
• Stay seated in the cars while in motion.
• Please exit the train only after it comes to a complete stop.
• Hazardous voltage which can cause electrical shock exists inside the equipment. Only qualified personnel
or technicians should work inside the equipment.
• This game features flashing lights which may not
be suitable for people with photosensitive epilepsy.
Page 1
Page 2
Contents
Read This Before Installation
DBA is installed in the Coin Mech location.
The DBA is ICT A6. The manual is inside the steam
train and not included in this manual. To ride children
will need to put money in DBA and the machine will
start working.
Mini Steam Train Specifications
Dimension: L 236” x W 118” x H 108”
Weight: 1,102 lbs
Voltage: 110V/220V
Weigh Limit: 40KG/88lbs per car
Capacity: Can sit 4 children.
Page 3
Page 2
Contents
Double Frame Wire Manual
Page 3
Page 2
Contents
Controller Operating Manual
Page 3
Page
4
Contents
Music Box Operating Manual
Page 5
Page 4
Contents
Electronic Coin Machine Operating Manual
Page 5
Page
6
Contents
Electronic Coin Machine Operating Manual
Page 7
Page 6
Contents
Coin Box Manual
Page 7
Page 8
Contents
Base Installation Manual
1
The first step is connecting
six bases of Steam Train.
Please arrange the bases in
number order. Please match
the same numbers in order
[See pictures A and B]
A
B
2
3
Remember to make sure
the connecting wire (which
connects inside the castle) are
pulled through and left on the
green carpet side.
[See picture C]
C
Finally, please remember to
screw the bases together.
[See picture D]
D
Page 9
Page 1
Contents
Castle Installation Manual
1
The Second Step is putting
on the castle. Please match
it to the shape on the green
grass surface.
Please locate the “front side”
stickers on both the base and
the castle.
[See pictures E and F]
E
F
2
Then put the castle on the
green grass surface.
Please make sure the bolt
holes line up.
[See pictures G and H]
G
H
Page 2
Page
10
Contents
Castle Installation Manual [CONTINUED]
3
There are two doors on
the castle. Please open the
control door side as the
sticker shows.
[See picture I]
I
4
Then connect the wires both
on green grass surface and
inside the castle.
[See picture J]
J
5
Finally, close the control door
and fix the castle with bolts
on both sides. The bolts are
in front of each door.
[See picture K]
K
Page 11
Page 1
Contents
Traffic Light Installation Manual
1
The Third step is connecting
the wires of traffic lights with
the wires on greensward.
Put the traffic light on
the green grass surface
according to the shape of
traffic light and line up the
bolt holes.
L
[See picture L]
Remember to put the traffic
light on facing the right
direction. Locate the “front
side” stickers on the green
grass surface and the light.
M
[See picture M]
2
Connect the wires coming
out of the trains base and the
wires from the traffic light.
[See picture N]
N
Page 2
Page
12
Contents
Train Car Installation Manual
1
The fourth step is putting the
train into the track.
Take off the track before the
one which is has the “Train
Entry” sticker on it.
[See picture O]
2
O
Put the train onto the track
as in number order (one, two,
and three).
[See pictures P, Q, and R]
P
Q
R
Page 13
Page 1
Contents
Train Car Installation Manual [CONTINUED]
3
Connect each of the trains
with the bolts. Then plug in
the power cord between
the trains.
[See picture S]
S
4
Finally, remember to put
the track back on that was
removed in Step 1.
T
Page 2
Page
14
Contents
Fence Installation Manual
1
The fifth step is connecting
the fences.
Please arrange the fences
in number order around the
green grass base.
[See picture U]
2
Attach the green brackets to
the fence sections and then
attach the fence sections
fences to the green grass
surface with bolts.
[See pictures V and W]
U
V
W
Page 15
Page 1
Contents
Fence Installation Manual [CONTINUED]
3
Attach the fence sections in
order with bolts. There are a
top and a bottom sections on
both ends of the fence section
that require bolts.
[See pictures X and Y]
X
Y
Page 2
Page
16
Contents
Page 17
Page 18
84 Aero Drive
Suite 4
Buffalo, New York, 14225, USA
Phone: 1 (716) 866-0054
Fax: 1 (716) 630-0055
E-mail: [email protected]
Visit: www.barrongames.com
!
www.barrongames.com