Analytical balance:
Specification:
• Max. Weight - 210g,
• Readability - 0.0001g
• Unit with internal calibration
• User Selectable environmental settings
• Upfront level indicator for quick easy leveling
• Easy to clean draftshield with sliding top & side doors
REQUEST FOR QUOTATION
Project name: TBCARE II
TB CARE II Project funded by USAID is anticipating quotations from the respective vendors based on
the below mentioned specification by 27 April, 2012 (sealed quotation is invited) to House #4, Road
#18, Apt #B-1, Block: A, Banani, Dhaka: 1213.
Item name: Autoclave
Origin: US/non US (US brand will get preference)
Technical Specification:
Details specification
Operating temperature range
Sterilizer
100-150◦C (0.019-0.21MPa)
Heating
45-110◦C (0-0.015MPa)
Warming
45-100◦C
Maximum Operating pressure
0.25MPa
Temperature
Display
Digital
Pressure gauge
Display
Analog
Display range
0-0.4MPa
Heat source
3.0-5.0 KW electric heater
Protection type against electrical
Class I equipment
shock
Time
Display
Digital
Display range- sterilizing
1-99 hours, 1-999 min (0.019.59,10-99 chargeable)
Warming
1-99 hours, 4 hours (Changeable)
Pressure chamber type
PED Category (g)
Chamber dimensions
370X774 mm
Chamber capacity
Effective internal volume: 65-100 L, Internal volume: 75-100 L
Chamber material
SUS304
Weight
70-100 kg
Rated voltage
230V AC
Power input
13A
Required power supply
Single phase 230 V AC 950/60 Hz) 15A or more
Power consumptions
3.0 KW
Accessories
Stainless baskets-2 with other accessories
Additional requirements:
Control unit
Air filter
Re cooling system
Wire baskets
Warranty
Servicing
Control unit for fully automated process control, sterilization of liquids, including
temperature probe
Exhaust air filtration system for autoclave
Autoclave re cooling system to shorten the time of liquid sterilization
Wire baskets with drip tray
Three years
Three years
Bench Top pH Meter with pH Electrode and Buffer Solutions (pH 4.01 and pH 7.00)
Origin: USA
INCLUDING Calibration Buffer Solution:
1. pH Buffer 4.01 Color-Coded Red (NIST), 500 mL/container
2. pH Buffer 7.00 Color-Coded Yellow (NIST), 500 mL/container
Product Features:
 Fast, easy to calibrate
 Requires minimal keystrokes and measures pH, millivolt potential and temperature
Product Specifications:
 Range:
pH: -2.00 to19.99
mV: 2000mV
Temp: -10.0°C to 110.0°C
 Resolution:
pH: 0.1; 0.01; 0.001 (selectable)
mV: 0.1 mV
Temp: 0.10C
 Accuracy:
pH: 0.002
mV: 0.2 or 0.1% mV
Temp: 0.30C at 0-700C; 1.00C at 70-1100C
 Calibration points:
1,2 or 3 (1 uses previous calibration slope and adjust offset; 2 & 3 create new slope)
 Calibration Review:
User activated; Shows last cal slope, Buffers/standards used & mV in each standard
 Buffer recognition:
Auto;4.01, 6.86, 7.00,10.01
Class II type A2 Bio Safety Cabinet, 5 feet
Gas tap, Double outlet power point (220V, 50Hz,)
Fluorescent and Germicidal lamp (UV lamp) facility
Floor stand for the BSC
Real time air flow monitoring facility
Provision for Lo-Flow Audible Alarm
Performance: NSF/ANSI 49 certification.
Window type: vertically sliding type.
Must provide service, operating manual, details of decontamination and validation procedure
Operating Power: 220 V, 50 Hz
Installation: Supplier should install and demonstrate operation satisfactorily.
Warranty: Minimum one year from the date of installation including spares, labor and transport etc.
Item name: Centrifuge (Refrigerated)
Country of origin: USA
Details Specification:
1. Interchangeable swing bucket and high-speed fixed angle rotors 2. Accommodate capacities up to 16 X 50 ml conical (Falcon ® ) or 16 x 15 ml
conical (Falcon ® ) tubes per run.
3. Spin up to 14,000 rpm, or 20,800 x g or more
4. Low-profile access height for easy sample loading
5. Automatic rotor recognition senses rotor type to set maximum
allowable speed—ensures safety 6. Fast, simple programming of time, temperature (refrigerated models),
speed/ g-force and radius value 7. Adjustable-speed Short Spin button 8. Speed, g-force and radius correction values can be entered 9. Values can be changed during centrifugation 10.Temperature range from –10 °C to 40°C, with Fast Temp function for
rapid cooling of the centrifuge chamber
11.Standby cooling maintains temperature when not in use 12.Selectable program memory for individual user programs
Accessories:
1. Centrifuges rotor-2 pcs
2. Centrifuge rotor buckets-2 pcs
3. Aerosol tight lids for rotor buckets- 8 pcs
4. Reducing adapter for 50 ml centrifuge tubes-12 pcs
5. Reducing adapter for 15 ml/12 ml centrifuge tubes-8 pcs
Specification for electric microincineration:
Origin: USA
 Most suitable for the sterilization of inoculation loops, needles and
instruments
 Ideal for laboratories and safety cabinets where the use of gases and open
flames is not permitted
Falcon tube: 50 ml capacity
Specification:
• Approximate dimensions: 30 mm O.D.; 115 mm length
• Sterilized by gamma irradiation and non-pyrogenic
• Dark blue printed graduations and white writing patch
• Polyethylene flat-top screw cap allows one hand manipulation and provides a
level writing area
• Modified polystyrene offers improved stress resistance
General-Purpose Laboratory
Refrigerators
Specification:
•
•
•
•
•
Temperature range: -3° to +10°C
Capacity: 21 cu ft
So shelves: 4
No doors: 1 glass door
Exterior dimensions: 29.1” x 31.7” x 79.4”
HOT AIR OVEN:
Origin: USA
1. Interior Volume: 199 Liter
2. Shelves: Max capacity- 17, Standard supply-2
3. Operating temperature: Ambient temp.+20°c up to 250°c
4. Easy to operate with natural convection & air circulation drying option to meet
general drying needs
5. Short process & heat up times & precise heat control to 250°c
6. Temperature regulation by precise Kelvitron microprocessor based controller with
large eye level display
7. Interchangeable silicone door gasket, removable shelf support & rounded corner
for easy cleaning
8. Power: 220 volt, 50/60 hertz
9. Must be US brand
CODE NUMBER
NAME OF EQUIPMENT:
Precision Incubator for culture
Tender specifications
MANUFACTURER:
Quantity: Type / Model
Country of Origin
MAIN SPECIFICATIONS:
Chamber made of stainless steel, easy to clean
Housing preferably stainless steel or at least
durable corrosion-resistant coating of metal
used (e.g. galvanized sheet metal coated with
epoxy, hardened by heat treatment)
Double doors, double lock
Inner glass doors
Volume of interior housing ≥ 600-800 L ˜
Designed specially for temperatures up to +70
°C, optimised for living cultures at 37 °C
Temperature variation at +37 °C <± 0.1 °C
Temperature overshoot within this limit
Temperature range +30 °C (at least 5 °C above
ambient temperature) to +70 °C
Adjustable overtemperature protection controller
TWW protection class 3.1 or electronic
temperature limiter TWB protection class 2
Uniformity of temperature inside in the chamber
(deviation <± 0.2 °C)
Two high grade temperature sensors (class A)
with mutual monitoring and taking over
performance at same working temperature
Integrated programmable timer for tempering
profiles
Programmes stored on power failure
Adjustable air flap for preheated fresh air intake
Vent connection with restrictor flap
Simultaneous indication/display of temperature,
weekday, time and ramp segment information
Bidder’s Specification*
Alarm (audible/visible) if desired temperature is
exceeded
Function signals for operating mode
Long term logging (ring store) internal memory
to save temperature and error states, with time
stamp to the minute, GLP-conforming
Serial RS 232 interface with software for read
out of data with PCL3-compatible printer
Electric needs
Power supply voltage: AC 230 ± 10V, 50 Hz,
European plug**
Consumption: approx. 2.000 W, when heating
Protection class: DIN/EN 60529/or county
specific
Circuit radio interference free in accordance
with EN 55 014/ or country specific norms
GLP conforming documentations, programmes,
storage, serial interface RS 232
Manufacturer’s Certificate: Manufacture’s
calibration certificate for +37 °C
Quality and Safety standards met by the
product offered have to be listed
Accessories:
One or two additional perforated stainless steel
shelves, non-tipping, if needed to match four
shelves per incubator
Operation and Maintenance Manual:
Operation/Maintenance/Service manuals, at
least one set each, in English and languages
have to be provided for each unit delivered
Installation and Maintenance: Each bidder
has to install the delivered equipment through
certified/ qualified engineers. The detailed
installation prerequisites have to be
communicated to the purchaser in advance. A
detailed instruction of the laboratory personnel
on use, function and maintenance of the
equipment (user training) as well as a
comprehensive maintenance plan is part of this
procurement
Standard Maintenance Tools:***
Spare Parts:
A set of fuses, if used in the incubator to protect
regulation
Packing data:****
Net weight
Gross weight:
Dimensions (W x H x D) in cm
Appliances must be transported upright (Y/N)
Costumers Tariff Number
Warranty: 2 years on regulation, 5 years o
heating coils
Remarks: The design and workmanship of
equipment offered, including power supply, has
to be suited to operate properly and
continuously under the climatic conditions in the
purchaser’s country. Especially humidity, growth
of fungi, thunder storms and possible spikes in
the electric network will have to be taken into
consideration.
For longer storage an appropriate packing
should be provided on delivery
Each bidder may propose any system / product
better than the requirements listed above
˜ Volume needs to be adjusted. In a volume of about 600 L approximately 2.000 slants of
standard size (tubes with a diameter of 16 – 18 mm and a length of 125 – 150 mm) can be
incubated (9 racks with 60 tubes per shelve, 4shelves). This means an incubator of this size
is suited for about 1.000 specimens to be cultured per month, if only one slant is inoculated
per specimen and for 500 samples per month if two slants are inoculated per specimen.
* NA if not applicable
* * Needs to be adjusted to the voltage and/or plugs used or available inside the country.
*** This could be a standard text (if applicable) like: ”All standard accessories, consumables,
parts required for the proper operation and all standard tools, cleaning and lubrication
material shall be included in the offer. Each bidder has to specify the quantities in its offer of
every item or items not specified above. Consumables should be calculated for at least 3
years (can be adjusted)
**** Packing data are not necessarily part of the bidding process, but if shipment is arranged
by the country (NGO), these data are needed for shipment papers and customs declaration
Magnetic stirrer:
Specification:
• Ceramic coated heating plate
• Instant on operation
• Built-in control for heating and stirring
• Temperature: ambient +5 to 550ºC
• Speed: 60 – 1200rpm
• Size: 4 x 4”, 7 x 7”, 10 x 10”
MICROPIPETTE
Origin: USA
Capacity: 10-100 µl
Capacity: 100-1000 µl
Capacity: 1-5 ml
NAME OF EQUIPMENT:
CODE NUMBER
Online UPS with battery pack for BSC
delivered
Tender specifications
Quantity: MANUFACTURER:
Type / Model
Country of Origin
Description of function:
MAIN SPECIFICATIONS:
UPS microprocessor controlled, line
interactive, on line continuous transducer, 20
min.
Booster function to regulate up voltage brake
down to 170 V (to safe battery)
Buck function to regulate down voltage
increase up to 280 V
Filter to protect against voltage spikes
Protection against overload and short circuit
Advanced battery check for automated
periodic battery inspection
Indicators for status like normal function, net
down, working on battery, loading battery,
battery capacity
Sleep mode if consumer is shut off
Power rating: 1500/900 VA/W (needs to be
adjusted to the consumption of the BSC
offered/delivered, e.g. 2000/1200)
Power: 230 V +/- 25%, 50 Hz or 60 Hz (+/10%) with automatic recognition
Battery, maintenance-free, automatic shut off
before reaching complete decharge?
Time for recharging: approx. 4 hours to reach
at least 90% of total capacity
Outlet voltage: Sine, 230V +/- 3%, 50 or 60
Hz +/- 0.5%
Changeover time: <5 msec
Bidder’s
quoted*
Specifications
Efficiency coefficient approx. 98%, on battery
>85%
Noise at 1 m distance < 48 dB[A]
Permissible ambient temperature/relative
humidity: 0 – 40 °C/≤95 % (not condensing)
VI according to IEC 62040-3
Electric needs
Supply voltage: 230 ± 10 ACV, 50 Hz,
European plug**
Consumption: approx.1500 W (depending on
the model chosen
Protection class: EN 60529/or county specific
Protection: IP 20
Circuit radio interference free in accordance
with EN 55 014/ or country specific norms
Manufacturer’s Certificate shall be specified
and provided for each item supplied
Quality and Safety standards met by the
product offered have to be listed
Accessories:
Battery pack to ensure operating of the BSC
for at least 20 minutes after power blackout
Connection (cable and fittings) for battery
pack
Operation and Maintenance Manual:
Operation/Maintenance/Service manuals, at
least one set, in English and XYZ languages
have to be provided for each unit delivered
Installation and Maintenance: Each bidder
has to install the delivered equipment through
certified/ qualified engineers. The detailed
installation prerequisites have to be
communicated to the purchaser in advance. A
detailed instruction of the laboratory
personnel on use, function and maintenance
of the equipment (user training) as well as a
comprehensive maintenance plan is part of
this procurement
Standard Maintenance Tools:***
Spare Parts:
Packing data:****
Net weight
Gross weight
Dimensions (W x H x D) in cm
Appliances must be transported upright (Y/N)
Costumers Tariff Number
Warranty: Warranty: >2 years on UPS, >5
years for battery pack
Remarks: The design and workmanship of
equipment offered, including power supply,
has to be suited to operate properly and
continuously under the climatic conditions in
the purchaser’s country. Especially humidity,
growth of fungi, thunder storms and possible
spikes in the electric network will have to be
taken into consideration.
For longer storage an appropriate packing
should be provided
Each bidder may propose any system /
product better than the requirements listed
above
* NA if not applicable
* * Needs to be adjusted to the voltage and/or plugs available or used inside the
country. Plugs inside an instrument may dependent on the country from which the
equipment is purchased. Plugs inside the BSC may differ from its main connection to
the electric net (e.g. Vortex to be used in a BSC can only be connected trough the
plugs inside the BSC). Therefore a well prepared and coherent set of specification
documents has to be prepared and submitted.
*** This could be a standard text (if applicable) like: ”All standard accessories,
consumables, parts required for the proper operation and all standard tools, cleaning
and lubrication material shall be included in the offer. Each bidder has to specify the
quantities in its offer of every item or items not specified above. Consumables should
be calculated for at least 3 years (can be adjusted)
.
**** Packing data are not necessarily part of the bidding process, but if shipment is
arranged by the country (NGO), these data are needed for shipment papers and
customs declaration
Specification of Inspissator
Origin: US/Non US
Quantity: 02
Name of heading
Name of the item
Type
Dimensions
Power
Capacity
Rack
Details
Coagulator (inspissator) for Lowenstein-Jensor
Waterbath model for universal bottles
1040 X 600 X 380 mm (approx.)
1500 W
162 universal containers
01
TECHNICAL SPECIFICATION
1. HOT AIR OVEN:
Origin: USA
1. Interior Volume: 199 Liter
2. Shelves: Max capacity- 17, Standard supply-2
3. Operating temperature: Ambient temp.+20°c up to 250°c
4. Easy to operate with natural convection & air circulation drying option to meet
general drying needs
5. Short process & heat up times & precise heat control to 250°c
6. Temperature regulation by precise Kelvitron microprocessor based controller
with large eye level display
7. Interchangeable silicone door gasket, removable shelf support & rounded
corner for easy cleaning
8. Power: 220 volt, 50/60 hertz
9. Must be US brand
2. WATER DISTILLATION PLANT
Origin: USA
ACCESSORIES INCLUDED:
1. Pretreatment Kit
2. Pretreatment Cartridge/Mixed Bed
Product Features:
 Distillation process increases water purity to above 1 megohm-cm.
 Patented vapor trap eliminates carry-over of vapor-borne contaminants.
 Glass components eliminate the leaching of impurities.
 Fully automatic microprocessor controls simplify operation and cleaning, while
assuring high reliability.
 24-hour automatic control activates still as required to maintain a full reservoir.
 Automatic drain cycle in tap feed models reduces cleaning frequency.
 Thermistor and heat sensor offer double protection against low water conditions.
 For convenience, unit is designed with capabilities for tap or pretreated
feedwater.
 Space-saving design; wall or bench mounted.
 Automatic start/stop feature when connected to FI-Streem tank or using float
switch provided.
Pretreatment Kit:
 FI-Streem deionizers are a simple pretreatment system for FI-Streem III glass
stills.
 The use of pretreated water increases purity and decreases cleaning.
 Utilizes disposable cartridges for removal of organics and inorganic.
 Visual “Go/No Go” indicator alerts operator when cartridge replacement is
necessary.
Product Specifications:
 Capacity: 4 Liters/hour
 Cooling Water: 120 LPH
 Maximum Pressure: 80 psig / 5.6 kg/cm2
 Minimum Pressure: 15 psig / 1.1 kg/cm2
 Feed Water Type: Tap/Pretreated
 No. of Heater: 4
 TOC in Produced Water: < 5 ppb
 Flow Rate: </= 800 ml/min
 Pressure: 30-80 psig
 Inlet Water Temperature: 1°C to 35°C
 Overall Dimensions (W×H×D): 30.5×46.0×48.3 cm
 Power: 240 Volt; 50/60 Hz; 30 Amps
3. MICROPIPETTE
Origin: USA
Capacity: 10-100 µl
Capacity: 100-1000 µl
Capacity: 1-5 ml
4. Bench Top pH Meter with pH Electrode and Buffer Solutions (pH 4.01 and pH
7.00)
Origin: USA
INCLUDING Calibration Buffer Solution:
1. pH Buffer 4.01 Color-Coded Red (NIST), 500 mL/container
2. pH Buffer 7.00 Color-Coded Yellow (NIST), 500 mL/container
Product Features:
 Fast, easy to calibrate
 Requires minimal keystrokes and measures pH, millivolt potential and
temperature
Product Specifications:
 Range:
pH: -2.00 to19.99
mV: 2000mV
Temp: -10.0°C to 110.0°C
 Resolution:
pH: 0.1; 0.01; 0.001 (selectable)
mV: 0.1 mV
Temp: 0.10C
 Accuracy:
pH: 0.002
mV: 0.2 or 0.1% mV
Temp: 0.30C at 0-700C; 1.00C at 70-1100C
 Calibration points:
1,2 or 3 (1 uses previous calibration slope and adjust offset; 2 & 3 create new
slope)
 Calibration Review:
User activated; Shows last cal slope, Buffers/standards used & mV in each
standard
 Buffer recognition:
Auto;4.01, 6.86, 7.00,10.01
WATER DISTILLATION PLANT
Origin: USA
ACCESSORIES INCLUDED:
1. Pretreatment Kit
2. Pretreatment Cartridge/Mixed Bed
Product Features:
 Distillation process increases water purity to above 1 megohm-cm.
 Patented vapor trap eliminates carry-over of vapor-borne contaminants.
 Glass components eliminate the leaching of impurities.
 Fully automatic microprocessor controls simplify operation and cleaning, while
assuring high reliability.
 24-hour automatic control activates still as required to maintain a full reservoir.
 Automatic drain cycle in tap feed models reduces cleaning frequency.
 Thermistor and heat sensor offer double protection against low water conditions.
 For convenience, unit is designed with capabilities for tap or pretreated feedwater.
 Space-saving design; wall or bench mounted.
 Automatic start/stop feature when connected to FI-Streem tank or using float switch
provided.
Pretreatment Kit:
 FI-Streem deionizers are a simple pretreatment system for FI-Streem III glass stills.
 The use of pretreated water increases purity and decreases cleaning.
 Utilizes disposable cartridges for removal of organics and inorganic.
 Visual “Go/No Go” indicator alerts operator when cartridge replacement is
necessary.
Product Specifications:
 Capacity: 4 Liters/hour
 Cooling Water: 120 LPH
 Maximum Pressure: 80 psig / 5.6 kg/cm2
 Minimum Pressure: 15 psig / 1.1 kg/cm2
 Feed Water Type: Tap/Pretreated
 No. of Heater: 4
 TOC in Produced Water: < 5 ppb
 Flow Rate: </= 800 ml/min
 Pressure: 30-80 psig
 Inlet Water Temperature: 1°C to 35°C
 Overall Dimensions (W×H×D): 30.5×46.0×48.3 cm
 Power: 240 Volt; 50/60 Hz; 30 Amps