STRAIGHTENING MACHINES
with 7 straightening rolls
Model
strip-widths
mm
strip-thickness
mm-mm
R-32/100/7-A
R-32/200/7-A
100
200
0,3-2,5
0,3-2,5
7
7
32
32
2
2
32
32
0,75
0,75
R-65/200/7
R-65/360/7
R-65/500/7
R-65/800/7
200
360
500
800
0,6-4,0
0,6-4,0
0,6-4,0
0,6-4,0
7
7
7
7
65
65
65
65
2
2
2
2
65
65
65
65
2,2
2,2
2,2
2,2
•
•
•
•
•
•
•
•
•
pinch-rolls
no.
dia/mm
power
kW
straightening rolls are in a high quality steel, hardened and polished.
powered through a gear drive with with a chain drive for both pinch-rolls and all down straightening rolls.
normal strip-speed is 0-20 m/min with a variable frequency servomotor for strip loop control
pinch-rolls at the intake side (R 65) and at the outlet end (R-32-A). The adjusting system is manual
or pneumatic.
single adjusting system of the upper straightening rolls is manual (R 65) control with dial gauge
block adjusting system of the upper straightening rolls is manual (R 32-A) control with dial gauge
with alligator-opening through a hand (R 32-A)
strip edge control manual and with central adjusting.
horizontal Strip guides rolls at the intake side.
R-95/200/7-HA
R-95/360/7-HA
R-95/500/7-HA
R-95/800/7-HA
R-95/1000/7-HA
•
•
•
•
•
•
•
•
straightening rolls
no.
dia/mm
200
360
500
800
1000
0,8-8,0
0,8-8,0
0,8-8,0
0,8-8,0
0,8-8,0
7
7
7
7
7
95
95
95
95
95
2
2
2
2
2
95
95
95
95
95
4,0
4,0
4,0
4,0
4,0
straightening rolls are in a high quality of steel, hardened and polished.
powered through a gear drive and with a chain drive for both pinch-rollers and all down straightening rolls.
normal strip-speed is 0-20 m/min with a variable frequency servomotor for strip loop-control
pinch rolls at the outlet end. The adjusting system is pneumatic or with hydraulic
single adjusting system of the upper straightening roll is manual, with control with digital counter
with hydraulic alligator-opening
strip edge control is manual operated with central adjustment.
horizontal strip guides rolls at the intake side.
Accessories:
- optional increase of the straightening speed
- alligator opening with the straightening-head near 30°
- hydraulic leading-in systems
- optional hard chrome-plated straightening- and pinch-rolls
- central lubrication with hand-operated pump
- transfer-table between straightener and feeder
- motor-driven adjustment of the straightening-rolls ( R-95)
your partner for metal processing lines and feed technology
BSA Bandform-Stanztechnik Anlagen GmbH
Postfach 31 24 · D-58820 Plettenberg
Internet: www.bsa-maschinen.de
Telefon: 00 49 23 91/95 20 83
Telefax: 00 49 23 91/95 20 84
E-Mail: [email protected]
STRAIGHTENING MACHINES
with 7 straightening rolls
double sided pinch-rolls
Model
strip-widths
mm
strip-thickness
mm-mm
R-95/200/7-PZ
R-95/360/7-PZ
R-95/500/7-PZ
R-95/800/7-PZ
R-95/1000/7-PZ
200
360
500
800
1000
0,8-8,0
0,8-8,0
0,8-8,0
0,8-8,0
0,8-8,0
7
7
7
7
7
95
95
95
95
95
2+2
2+2
2+2
2+2
2+2
95
95
95
95
95
4,0
4,0
4,0
4,0
4,0
R-125/500/7-PZ
R-125/800/7-PZ
R-125/1000/7-PZ
500
800
1000
1,2-6,0
1,2-6,0
1,2-6,0
7
7
7
125
125
125
2+2
2+2
2+2
145
145
145
7,5
7,5
7,5
•
•
•
•
•
•
•
•
straightening rolls
no.
dia/mm
pinch-rolls
no.
dia/mm
power
kW
straightening rolls are in a high quality of steel, hardened and polished.
powered through a gear drive with a chain drive for both pinch-rollers and all down straightening rolls
normal strip-speed is 0-20 m/min with a variable frequency servomotor for strip loop control
pinch rolls for both the intake side and the outlet end, the adjusting system is manual, pneumatic
or hydraulic
single adjusting system of the upper straightening rolls is manual, control with digital counter
with hydraulic alligator-opening
strip edge control manual and with central adjusting.
horizontal strip guides rolls at the intake side.
Accessories:
• optional increase of the straightening speed
• hydraulic leading-in systems
• optional hard chrome-plated straightening- and pinch-rolls
• central lubrication with hand-operated pump
• transfer-table between straightener and feeder
• motor-driven adjustment of the straightening-rolls
your partner for metal processing lines and feed technology
BSA Bandform-Stanztechnik Anlagen GmbH
Postfach 31 24 · D-58820 Plettenberg
Internet: www.bsa-maschinen.de
Telefon: 00 49 23 91/95 20 83
Telefax: 00 49 23 91/95 20 84
E-Mail: [email protected]
STRAIGHTENING MACHINES
with 9 straightening rolls
Model
strip-widths
mm
strip-thickness
mm-mm
straightening rolls
no.
dia/mm
pinch-rolls
no.
dia/mm
power
kW
R-45/200/9-A
R-45/360/9-A
R-45/500/9-A
R-45/800/9-A
R-45/1000/9-A
200
360
500
800
1000
0,4-2,0
0,4-2,0
0,4-2,0
0,4-2,0
0,4-2,0
9
9
9
9
9
45
45
45
45
45
2
2
2
2
2
63
63
63
63
63
1,5
1,5
1,5
3,0
5,5
R-63/200/9-A
R-63/360/9-A
R-63/500/9-A
R-63/800/9-A
R-63/1000/9-A
200
360
500
800
1000
0,6-4,0
0,6-4,0
0,6-4,0
0,6-4,0
0,6-4,0
9
9
9
9
9
63
63
63
63
63
2
2
2
2
2
90
90
90
90
90
2,2
2,2
2,2
2,2
3,0
R-90/200/9-A
R-90/360/9-A
R-90/500/9-HA
R-90/800/9-HA
R-90/1000/9-HA
R-90/1500/9-HA
200
360
500
800
1000
1000
0,8-8,0
0,8-8,0
0,8-8,0
0,8-8,0
0,8-8,0
0,8-8,0
9
9
9
9
9
9
90
90
90
90
90
90
2
2
2
2
2
2
125
125
125
125
125
125
4,0
4,0
4,0
4,0
7,5
20,0
• the straightening rolls and pinch rolls are specially stabilised when an
higher cross sectional area ratio is necessary.
• straightening rolls are in a high quality of steel, hardened and polished.
• powered through a gear drive with a chain drive for both pinch-rollers and all down straightening rolls
• normal strip-speed is 0-20 m/min with a variable frequency servomotor for strip loop control
• pinch rolls at the outlet end, the adjusting system is manual, pneumatic or with hydraulic
• Block adjusting system for the upper straightening rollers are manual, the head of the straightening machine is
adjusted by 2 hand wheels integrated SIKO control counter.
• adjusting system of the upper straightening rolls is manual, controlled with digital counter
• alligator-opening manual (A) or hydraulic (HA)
• strip edge control is manual, centrally adjusted.
• horizontal strip guide rolls at the intake side.
Accessories:
• optional increase of the straightening speed
• drive about transfer box with universal shaft
• hydraulic lead-in systems
• optional hard chrome-plated straightening- and pinch-rolls
• central lubrication with hand-operated pump
• transfer-table between straightener and feeder
• motor-driven adjustment of the straightening-rolls
your partner for metal processing lines and feed technology
BSA Bandform-Stanztechnik Anlagen GmbH
Postfach 31 24 · D-58820 Plettenberg
Internet: www.bsa-maschinen.de
Telefon: 00 49 23 91/95 20 83
Telefax: 00 49 23 91/95 20 84
E-Mail: [email protected]
STRAIGHTENING MACHINES
with 13 straightening rolls
Model
R-32/100/13
R-32/200/13
strip-widths
mm
strip-thickness
mm-mm
100
200
0,25-2,5
0,25-2,5
straightening rolls
no.
dia/mm
13
13
32
32
pinch-rolls
no.
dia/mm
2
2
32
32
power
kW
1,1
1,1
• the straightening rolls and pinch rolls are specially stabilised when an
higher cross sectional area ratio is necessary.
• straightening rolls are in a high quality of steel, hardened and polished.
• powered through a gear drive and with a chain drive for both pinch-rollers and all down straightening rolls
• normal strip-speed is 0-20 m/min with a variable frequency servomotor for strip loop control
• pinch rolls at the intake side, the adjusting system is manual or pneumatic
• Block adjusting system for the upper straightening rolls is manual, the head of the straightening machine is
control with digital counter.
• strip edge control is manual, centrally adjusted.
• horizontal strip guide rolls at the intake side.
Accessories:
• optional increase of the straightening speed
• optional hard chrome-plated straightening and pinch-rolls
• central lubrication with hand-operated pump
• transfer-table between straightener and feeder
• strip edge control is manual, centrally adjusted.
your partner for metal processing lines and feed technology
BSA Bandform-Stanztechnik Anlagen GmbH
Postfach 31 24 · D-58820 Plettenberg
Internet: www.bsa-maschinen.de
Telefon: 00 49 23 91/95 20 83
Telefax: 00 49 23 91/95 20 84
E-Mail: [email protected]
STRAIGHTENING MACHINES
with 19 straightening rolls
all pinch-rolls and all straightening rolls are driven
about transfer box with universal transmission shaft
Model
strip-widths
mm
strip-thickness straightening rolls
mm-mm
no.
dia/mm
pinch-rolls
no.
dia/mm
power
kW
R-29/200/19
R-29/250/19
R-29/360/19
200
250
360
0,2-1,0
0,2-1,0
0,2-1,0
19
19
19
29
29
29
2
2
2
58
58
58
5,5
5,5
5,5
R-45/200/19
R-45/360/19
R-45/500/19
200
360
500
0,4-3,5
0,4-3,5
0,4-3,5
19
19
19
45
45
45
2
2
2
63
63
63
5,5
5,5
5,5
• the straightening rolls and pinch rolls are specially stabilised when
higher cross sectional area ratio is necessary.
• straightening rolls are in a high quality of steel, hardened and polished.
• powered through a gear drive and with a chain drive about transfer box with universal shaft
• normal strip-speed is 0-20 m/min with a variable frequency servomotor for strip loop control
• pinch rolls adjusting system is manual or pneumatic
• Block adjusting system for the upper straightening rollers is manual, the head of the straightening machine
is adjusted by 2 hand wheels integrated SIKO control counter.
• strip edge control is manual axial and centrally adjusted.
• horizontal strip guide rolls at the intake side.
Accessories:
• straightener clean-opening, with hydraulic lift of the head
• optional increase of the straightening speed
• hydraulic leading-in systems
• hard chrome-plated straightening- and pinch-rolls
• central lubrication with hand-operated pump
• transfer-table between straightener and feeder
• straightening rolls frame with quick change system
your partner for metal processing lines and feed technology
BSA Bandform-Stanztechnik Anlagen GmbH
Postfach 31 24 · D-58820 Plettenberg
Internet: www.bsa-maschinen.de
Telefon: 00 49 23 91/95 20 83
Telefax: 00 49 23 91/95 20 84
E-Mail: [email protected]