Anemo4403 Relay­Alarm
Wind speed sensor
Relay output
INTRODUCTION
50 mm
Robust and high durability under extreme
conditions.
High quality stainless steel bearings.
Maintenance free.
Power supply : 24 Vac ref. Anemo24acRelay­A
Power supply : 24 Vdc ref. Anemo24dcRelay­A
Relay output : NC or NO dry contact *1
Relay activation threshold > 20 km/h *2
Easy to connect. 20 meters cable included.
D 5 mm
CHARACTERISTICS
Robust wind speed sensor, extremely resistant and multipurpose, probably one of the best wind sensors in the market. Suitable for
many di erent applications. Supplied pre­wired with 20 meter cable for easy connection.
Stainless steel bearings and high quality technical plastic body and cups.
APLICATIONS
Anemo4403 Relay­Alarm has been designed for home and industrial applications: cranes, buildings, PV panels, wind turbines,
weather stations, greenhouses, irrigation systems...
CONNECTION
OPERATION
Up to 200 km/h wind speed.
Alarm output is activated after 30 seconds*3 above 20 km/h*2.
Alarm output is clamped for 1 h*4 period after activation.
*2
H=138.5mm
*2
10 mm
Brown ­ Power supply
Blue ­ Neutral phase
Black ­ Common
Yellow ­ Output NC *1
*1 Default output type NC. For NO output contact IED.
*2 Alarm threshold is factory configured. For other value contact IED.
*3 Alarm activation filter is factory configured. For other value contact IED.
*4 Clamping period is factory configured. For other value contact IED.
TECHNICAL CHARACTERISTICS
24 Vac
Común
NC *1
Power Supply
Power consumption
Starting speed
Measure range
Relay output
Relay contact
24 Vac / 24 Vdc
< 1VA
8 km/h
2 to 200 km/h
NC or NO *1
8A 250V
Accuracy
+/­ 2%
Storage temperature ­35ºC to +80ºC
Operating temp. (ice free) ­20ºC to +70ºC
155 g approx.
Weight
Weight (including cable)
1265 g approx.
Anemo4403 Relay ­ Alarm
150409