RSA-B-MAIM
SERIES POLES
Cat.#
Type
Job
Approvals
ROUND STRAIGHT ALUMINUM
APPLICATIONS
• Lighting installations for side and top mounting of luminaires with effective projected area (EPA) not exceeding maximum
allowable loading of the specified pole in its installed geographic location
CONSTRUCTION
• SHAFT: One-piece straight aluminum with fluted or smooth cross section; Extruded shafts of 6061-T6 aluminum in 3/16” or
1/4” thickness. Decorative base of 356 cast aluminum.
• POLE CAP OR FINALS: Cap or decorative finials available for side mounted luminaires. Open top or tenons provided for
post top mounted luminaires.
• HAND HOLE: Hand hole provided in cast base; Mounting provisions for grounding lug located behind cover
• ANCHOR BOLTS: Four galvanized anchor bolts provided per pole with minimum yield of 55,000 psi (ASTM F1554).
Galvanized hardware with two washers and two nuts per bolt for leveling
FINISH
• Durable thermoset polyester powder coat paint finish with nominal 3.0 mil thickness
• Powder paint finish coat available in twelve standard colors; Custom colors available; RAL number preferable.
5”
Diameter
43”
BASE DETAIL
TENONS & POLE CAPS
DECORATIVE
BASE
19.25”
WASHER
LEVELING NUT
Bolt Circle 15”
ANCHOR
BOLT
PROJECTION
FOUNDATION / FOOTING
(BY OTHERS)
ORDERING EXAMPLE:
S/F
RSA-B-MAIM
16
50
SERIES
STYLE
HEIGHT
SHAFT
RSA-B- Round Straight
MAIM Aluminum Pole
S Smooth
F Fluted
Reference
page 2
Ordering
11
matrix
Reference
page 2
Ordering
2L
2L2
matrix
Beacon
1
12L
2
122L
23Y3T
2L
23T
3T4
3Y
2L
3T
4
3Y
22
MOUNTING ORIENTATION
1
1
3Y
3Y
3T
3T
Description
2nd mode vibration damper
Denotes
handhole
location
Denotes
handhole
location
B3
MOUNTING
1 Single arm mount
2 Two fixtures at 180˚
2L Two fixtures at 90˚
3T Three fixtures
44
DRILL
PATTERN
B1 Cruzer
B3 VP-L
B4 VP-S
at 90˚
4
Denotes
Denoteshandhole
handholelocation
location
3Y 4
4
DenotesDenotes
handhole
locationlocation
handhole
ACCESSORIES- Order Separately
2L
THICKNESS
2L
Reference
page 2
Ordering
matrix
3T
Denotes handhole location
3Y
Catalog Number
VM2SXX
A/B/C
3Y Three at 120˚
4 Four fixtures at 90˚
OT Open top (includes pole cap)
TN3
TN4
TN5
TN8
ARC
BAL
CAP
Tenon 3 x 3
Tenon 3 x 4
DBT
FINISH
BBT Basic Black Texured
BMT Black Matte Textured
VM2
OPTIONS
GFI1 20 Amp GFCI
Receptacle and
Cover
BZT Bronze Textured
EHH1 Extra Handhole
DBT Dark Bronze Textured
C051 .5” Coupling
DPS Dark Platinum Smooth
C071 .75” Coupling
GNT Green Textured
C201 2” Coupling
GYS Gray Smooth
VM2 2nd mode
vibration
MBT Metallic Bronze
Textured
MST Metallic Silver Textured
MTT Metallic Titanium
Textured
Tenon 4 x 5
Tenon 4 x 8
OWI Old World Iron
Acorn Finial
WHT White Textured
Ball Finial
Cap
CC Custom Color- RAL
Color#
1 Specify option location using logic found on page 2 (Option Orientation)
Beacon Products • 2041 58th Avenue Circle East Bradenton, FL 34203 • Phone: 800-345-4928
Due to our continued efforts to improve our products, product specifications are subject to change without notice.
© 2016 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA RSA-B-MAIM POLES-SPEC 7/16
damper
LAB Less Anchor
Bolts
ORDERING INFORMATION Cont.
Height
Catalog Number
RSA-B-MAIM-S-10-50-B
RSA-B-MAIM-S-12-50-B
RSA-B-MAIM-S-14-50-B
RSA-B-MAIM-S-16-50-B
RSA-B-MAIM-S-18-50-B
RSA-B-MAIM-S-20-50-B
RSA-B-MAIM-S-22-50-B
RSA-B-MAIM-S-24-50-B
Feet
Meters
Nominal
Shaft Dimensions
Wall
Thickness
Bolt Circle
(suggested)
Bolt Square
Base Plate Size
Anchor Bolt Size
Bolt Projection
Pole weight
(lbs)
10
3.0
5" Round
0.188"
15"
10.6"
19-1/4" Hex x 43" Tall
5/8 x 24 x 3
3-1/2"
113
12
14
16
18
20
22
24
3.7
4.3
4.9
5.5
6.1
6.7
7.3
5" Round
5" Round
5" Round
5" Round
5" Round
5" Round
5" Round
0.188"
0.188"
0.188"
0.188"
0.188"
0.188"
0.188"
15"
15"
15"
15"
15"
15"
15"
10.6"
10.6"
10.6"
10.6"
10.6"
10.6"
10.6"
19-1/4" Hex x 43" Tall
19-1/4" Hex x 43" Tall
19-1/4" Hex x 43" Tall
19-1/4" Hex x 43" Tall
19-1/4" Hex x 43" Tall
19-1/4" Hex x 43" Tall
19-1/4" Hex x 43" Tall
5/8 x 24 x 3
5/8 x 24 x 3
5/8 x 24 x 3
5/8 x 24 x 3
5/8 x 24 x 3
5/8 x 24 x 3
5/8 x 24 x 3
3-1/2"
3-1/2"
3-1/2"
3-1/2"
3-1/2"
3-1/2"
3-1/2"
119
126
133
139
146
153
159
10.6"
10.6"
10.6"
10.6"
10.6"
10.6"
10.6"
10.6"
19-1/4" Hex x 43" Tall
19-1/4" Hex x 43" Tall
19-1/4" Hex x 43" Tall
19-1/4" Hex x 43" Tall
19-1/4" Hex x 43" Tall
19-1/4" Hex x 43" Tall
19-1/4" Hex x 43" Tall
19-1/4" Hex x 43" Tall
5/8 x 24 x 3
5/8 x 24 x 3
5/8 x 24 x 3
5/8 x 24 x 3
5/8 x 24 x 3
5/8 x 24 x 3
5/8 x 24 x 3
5/8 x 24 x 3
3-1/2"
3-1/2"
3-1/2"
3-1/2"
3-1/2"
3-1/2"
3-1/2"
3-1/2"
120
129
137
146
155
164
172
181
10.6"
10.6"
10.6"
10.6"
10.6"
10.6"
10.6"
10.6"
19-1/4" Hex x 43" Tall
19-1/4" Hex x 43" Tall
19-1/4" Hex x 43" Tall
19-1/4" Hex x 43" Tall
19-1/4" Hex x 43" Tall
19-1/4" Hex x 43" Tall
19-1/4" Hex x 43" Tall
19-1/4" Hex x 43" Tall
5/8 x 24 x 3
5/8 x 24 x 3
5/8 x 24 x 3
5/8 x 24 x 3
5/8 x 24 x 3
5/8 x 24 x 3
5/8 x 24 x 3
5/8 x 24 x 3
3-1/2"
3-1/2"
3-1/2"
3-1/2"
3-1/2"
3-1/2"
3-1/2"
3-1/2"
113
120
127
134
141
148
155
162
Anchor Base Detail
RSA-B-MAIM-S-10-50-C
RSA-B-MAIM-S-12-50-C
RSA-B-MAIM-S-14-50-C
RSA-B-MAIM-S-16-50-C
RSA-B-MAIM-S-18-50-C 90°
Arm 2
RSA-B-MAIM-S-20-50-C
RSA-B-MAIM-S-22-50-C
RSA-B-MAIM-S-24-50-C
10
3.0
5" Round
12
3.7
5" Round
14 180° 4.3 Bolt Slots/Holes
5" Round
16
4.9 Bolt Circle5" Round
viewed
18 Asfrom
5.5 270°
5" Round 90°
top
of pole.
Arm 1
Arm 2
20
6.1
5" Round
22
6.7
5" Round
24Bolt Square7.30°-Handhole5" Round
10
RSA-B-MAIM-F-10-50-B
12
RSA-B-MAIM-F-12-50-B
14
RSA-B-MAIM-F-14-50-B
Anchor Base Detail
16
RSA-B-MAIM-F-16-50-B
18
RSA-B-MAIM-F-18-50-B
180°
20
RSA-B-MAIM-F-20-50-BBolt Slots/Holes
Bolt Circle
22
RSA-B-MAIM-F-22-50-B
90°
270°
Arm 2
Arm 1
24
RSA-B-MAIM-F-24-50-B
As viewed
from top
of pole.
3.0
3.7
4.3
4.9
5.5
6.1
6.7
90°
Arm 2
7.3
180°
As viewed
from top
of pole.
5" Fluted
5" Fluted
5" Fluted
5" Fluted
5" Fluted
Bolt Slots/Holes
5"
Fluted
Bolt Circle
5"
Fluted
270°
Arm 1
5" Fluted
0.25"
0.25"
180°
0.25"
0.25"
As viewed
0.25"
from top
of pole.
0.25"
0.25"
0.25"
Bolt
Square
0.188"
0.188"
0.188"
0.188"
0.188"
0.188"
0.188"
0.188"
15"
15"
Bolt15"
Slots/Holes
Bolt15"
Circle
270°15"
Arm 1
15"
15"
0°-Handhole
15"
15"
15"
15"
15"
15"
15"
15"
15"
NOTE Factory supplied template
must be used when setting anchor
bolts. Hubbell Lighting will deny any claim for incorrect anchorage placement resulting from failure to use factory supplied template and anchor bolts.
0°-Handhole
0°-Handhole
Bolt Square
EHH - EXTRA
HANDHOLE
Bolt Square
BASE COVER
C05 - C07 - C20 - COUPLING
VM2 - VIBRATION DAMPER
2ND MODE
GFI – 20 AMP GFCI
RECEPTACLE & COVER
Round Steel Pole
2” -11.5 NPSM Threads
Factory installed, internal damper
designed to alter pole resonance to
reduce movement and material fatigue
caused by 2nd mode vibration.
3/4” - 14 NPSM
Overall Threads
Height 10'-30'
1/2” - 14 NPSM Threads
Provision for Grounding
OPTION ORIENTATION
Follow the logic below when ordering location specific options. For each
18" its height (in feet). Example:
option, include its orientation (in degrees) and
Option C07 should be ordered as: RSA-MAIM-F-16-50-B-TN3-DBT (.5”
coupling on the handhole/arm side of pole, 15 feet up from the pole base)
1’ spacing required between option. Consult factory for other configurations.
VM2SXX - VIBRATION
DAMPER 2ND MODE
Standard hand
hole frame
Adapter plate
Gasket
20 AMP GFCI
VIBRATION DAMPER
VM2S08
– 8'
2ND MODE
VM2S12 – 12'
VM2S16 – 16'
Field installed, internal damper
VM2S20 – 20'
designed to alter pole resonance
VM2S24 – 24'
to reduce movement and mateHeight of option in feet
rial fatigue caused by 2nd mode
vibration.
Wet Locations
In-use Cover
Bolt Square (Outer)
For more information about pole vibration
and vibration dampers, please consult http://cdn.spauldinglighting.com/content/products/literature/literature_files/Pole_Wind_Induced_Flyer_HLOI0022.pdf
Bolt Square
Due to our continued efforts to 0˚improve
our (Inner)
products, product specifications are subject to change without notice.
Handhole
Bolt Circle (Outer)
90˚
270˚
Bolt Circle (Inner)
180˚
TENON
Beacon Products • 2041 58th Avenue Circle East Bradenton, FL 34203 • Phone: 800-345-4928
Due to our continued efforts to improve our products, product specifications are subject to change without notice.
© 2016 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA
RSA-B-MAIM POLES-SPEC 7/16
ASCE7-05
WIND MAP
130
140
90
100
110
120
85
130
90
115
115
150
130
90
FLORIDA REGION WIND MAP
120
Wind Map
150
130
120
140
140
150
140
United States and Canada
160
150
170
140
160
Special Wind Region
(Consult Local Authorities)
170
140
150
180
140
180
90
140
100
130
110 120
HAWAII – 105 mph
PUERTO RICO – 145 mph
NOTES:
ASCE
maprecurrence
EPA Load
Rating
• Values are
based7-05
on 50wind
year mean
interval
30’ above grade.
Catalog
Number
85
90
100
105
• Hawaii has an 105 mph wind velocity.
25.0velocity.
25.0 25.0 24.6
•
Puerto Rico has a 125 mph wind
RSA-B-MAIM-S-10-50-B
• Caution must be exercised in determining wind velocities
25.0 24.3 19.8 18.1
RSA-B-MAIM-S-12-50-B
in special wind areas such as:
21.0 18.7 15.2 13.8
Mountainous Regions
RSA-B-MAIM-S-14-50-B
Areas surrounding the Great Lakes or other large bodies
16.7 14.8 12.0 10.9
RSA-B-MAIM-S-16-50-B
of water or open land.
13.3conditions,
11.7 such
9.4as 8.5
RSA-B-MAIM-S-18-50-B
Areas subject to extreme wind
hurricanes, typhoons, cyclones, and tornadoes.
10.6
9.2
7.3 6.6
RSA-B-MAIM-S-20-50-B
Areas adjacent to airports.
Any specific area with a known
abnormally
8.4 or suspected
7.2 5.6
5.0
RSA-B-MAIM-S-22-50-B
high intermittent wind condition caused by geography,
4.2 3.7
RSA-B-MAIM-S-24-50-B
adjacent structures, or other6.6
specific 5.6
local conditions
that may not be recorded in National Weather Service
records.
•
Allowable pole EPA for jobsite25.0
wind conditions
must be25.0
RSA-B-MAIM-S-10-50-C
25.0 25.0
equal to or greater than fixture EPA. Responsibility lies with
RSA-B-MAIM-S-12-50-C
25.0 based
25.0 on25.0
23.6
the specifier for correct pole selection
AASHTO
wind map and job location.
150
3•second
speeds
• Florida region wind map above is based upon 3-second
The Windgust
Map iswind
intended
only as a general guide. Always
consult local authorities to determine maximum wind
gust winds and the 2014 Florida Building Code
110
120gusting
130and140
150 for each
velocities,
unique 145
wind conditions
specific application.
22.5
19.1 16.3 14.1 13.2
12.3
• CAUTION: Wind speeds and listed EPAs are for ground
Florida Building Code 2014 EPA Load Rating - 3 second gust wind speeds
16.5
13.9installations.
11.9 10.3
9.6 on
8.9structures (such
mounted
Poles mounted
Catalog Number
as bridges
buildings)
consider6.8
vibration and
12.6
10.6and 9.0
7.8must 7.2
coefficient of height factors beyond this general guide. RSA-B-MAIM-S-10-50-B
Consult
AASHTO
standards.
9.9
8.3 7.0 6.0 5.6
5.2
• Extreme Wind Events: Hurricanes, Typhoons, Cyclones,RSA-B-MAIM-S-12-50-B
or
7.7
6.4 expose
5.4 poles
4.6
4.3debris,3.9
Tornadoes
to flying
wind shear, and
RSA-B-MAIM-S-14-50-B
other unpredictable aerodynamic forces not indicated by
5.9
4.9 4.1 3.4 3.2
2.9
the wind velocity ratings.
RSA-B-MAIM-S-16-50-B
• Pole Strength
Standard,
4.5
3.7 Limited
3.0 Warranty:
2.5 2.3
2.1unmodified Kim
lighting Poles installed as recommended, undamaged byRSA-B-MAIM-S-18-50-B
3.3
2.6 or lack
2.1of maintenance,
1.7 1.5 shall1.4
corrosion,
withstand steady
wind conditions as provided on page 2 (Allowable PoleRSA-B-MAIM-S-20-50-B
EPA). Installation of poles without luminaires, or attachment
RSA-B-MAIM-S-22-50-B
of any24.7
unauthorized
to poles
shall void this
25.0
21.2 accessories
18.3 17.1
16.0
warranty.
RSA-B-MAIM-S-24-50-B
21.6
18.2
15.6 13.5
12.6
11.7
RSA-B-MAIM-S-14-50-C
25.0
24.6
20.1 18.3
16.7
14.1
12.0 10.4
9.7
9.0
RSA-B-MAIM-S-16-50-C
22.1
19.7
16.0 14.5
13.3
11.2
9.5
8.2
7.6
7.1
RSA-B-MAIM-S-18-50-C
RSA-B-MAIM-S-20-50-C
17.9
14.5
15.8 12.8 11.6
12.7 10.2 9.2
10.6
8.4
8.8
7.0
7.5
5.9
6.4
5.0
6.0
4.6
5.5
4.3
RSA-B-MAIM-S-22-50-C
11.8
10.3
8.1
7.3
6.6
5.5
4.6
3.9
3.5
3.3
RSA-B-MAIM-S-24-50-C
9.6
8.2
6.4
5.7
5.2
4.2
3.5
2.9
2.6
2.4
RSA-B-MAIM-F-10-50-B
25.0
25.0 25.0 24.3 22.2
18.6 15.7 13.4 12.4
11.5
RSA-B-MAIM-F-12-50-B
25.0
24.1 19.5 17.7 16.0
13.3 11.1
9.4
8.6
7.9
RSA-B-MAIM-F-14-50-B
20.8
18.5 14.8 13.3 12.0
9.8
8.1
6.7
6.0
5.5
RSA-B-MAIM-F-16-50-B
16.5
14.6 11.5 10.3
9.2
7.3
5.8
4.7
4.2
3.7
RSA-B-MAIM-F-18-50-B
13.1
11.5
8.9
7.8
6.9
5.3
4.1
3.1
2.6
2.2
RSA-B-MAIM-F-20-50-B
10.3
8.9
6.7
5.8
5.0
3.7
2.6
1.7
1.4
1.0
RSA-B-MAIM-F-22-50-B
8.1
6.9
5.0
4.2
3.5
2.3
1.4
0.6
NR
NR
RSA-B-MAIM-F-24-50-B
6.3
5.2
3.5
2.8
2.2
1.1
NR
NR
NR
NR
115
120
130
140
150
160
170
180
25.0
25.0
22.0
19.6
17.1
15.0
13.3
11.8
20.5
18.8
15.9
14.4
12.5
10.9
9.6
8.5
15.7
14.3
12.0
11.1
9.6
8.3
7.2
6.3
12.1
11.0
9.0
8.2
7.4
6.3
5.4
4.7
9.3
8.3
6.7
6.2
5.7
4.8
4.0
3.4
7.1
6.2
5.4
5.0
4.3
3.6
2.9
2.4
5.3
4.6
4.2
3.8
3.2
2.6
2.0
1.5
3.8
3.1
3.0
2.7
2.3
1.7
1.2
0.8
RSA-B-MAIM-S-10-50-C
25.0
25.0
25.0
25.0
22.2
19.5
17.3
15.4
RSA-B-MAIM-S-12-50-C
25.0
24.7
21.0
18.8
16.4
14.4
12.6
11.2
RSA-B-MAIM-S-14-50-C
20.7
19.0
16.0
14.6
12.7
11.0
9.7
8.5
RSA-B-MAIM-S-16-50-C
RSA-B-MAIM-S-18-50-C
16.3
12.8
14.8
11.6
12.4
9.5
11.6
8.8
10.0
7.8
8.6
6.7
7.5
5.7
6.5
4.9
RSA-B-MAIM-S-20-50-C
10.0
9.0
7.8
7.3
6.2
5.2
4.4
3.7
RSA-B-MAIM-S-22-50-C
7.9
7.0
6.3
5.8
4.8
4.0
3.3
2.7
RSA-B-MAIM-S-24-50-C
6.1
5.3
4.9
4.6
3.7
3.0
2.3
1.8
RSA-B-MAIM-F-10-50-B
25.0
25.0
22.0
19.0
16.5
14.4
12.6
11.2
RSA-B-MAIM-F-12-50-B
20.5
18.8
15.9
13.6
11.7
10.1
8.8
7.6
RSA-B-MAIM-F-14-50-B
15.7
14.3
12.0
10.1
8.6
7.3
6.2
5.3
RSA-B-MAIM-F-16-50-B
12.1
11.0
9.0
7.5
6.2
5.1
4.2
3.5
RSA-B-MAIM-F-18-50-B
9.3
8.3
6.7
5.4
4.3
3.4
2.7
2.0
RSA-B-MAIM-F-20-50-B
7.1
6.2
4.9
3.7
2.8
2.0
1.4
0.8
RSA-B-MAIM-F-22-50-B
5.3
4.6
3.3
2.4
1.5
0.9
NR
NR
RSA-B-MAIM-F-24-50-B
3.8
3.1
2.1
1.2
0.5
NR
NR
NR
Beacon Products • 2041 58th Avenue Circle East Bradenton, FL 34203 • Phone: 800-345-4928
Due to our continued efforts to improve our products, product specifications are subject to change without notice.
© 2016 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA
RSA-B-MAIM POLES-SPEC 7/16
NOTES
Wind-speed Website disclaimer:
Hubbell Lighting has no connection to the linked website and makes no representations as to its accuracy. While the information presented on this third-party website provides a useful
starting point for analyzing wind conditions, Hubbell Lighting has not verified any of the information on this third party website and assumes no responsibility or liability for its accuracy.
The material presented in the windspeed website should not be used or relied upon for any specific application without competent examination and verification of its accuracy, suitability
and applicability by engineers or other licensed professionals. Hubbell Lighting Inc. does not intend that the use of this information replace the sound judgment of such competent
professionals, having experience and knowledge in the field of practice, nor to substitute for the standard of care required of such professionals in interpreting and applying the results
of the windspeed report provided by this website. Users of the information from this third party website assume all liability arising from such use. Use of the output of these referenced
websites do not imply approval by the governing building code bodies responsible for building code approval and interpretation for the building site described by latitude/longitude
location in the windspeed report. http://windspeed.atcouncil.org
• Allowable EPA, to determine max pole loading weight, multiply allowable EPA by 30 lbs.
• The tables for allowable pole EPA are based on the ASCE 7-05 Wind Map or the Florida Region Wind Map for the 2010 Florida Building Code. The Wind Maps are intended only as a general guide and cannot be used in conjunction with other maps. Always consult local authorities to determine maximum wind velocities, gusting and unique wind conditions for each specific application
• Allowable pole EPA for jobsite wind conditions must be equal to or greater than the total EPA for fixtures, arms, and accessories to be assembled to the pole. Responsibility lies with the specifier for correct pole selection. Installation of poles without luminaires or attachment of any unauthorized accessories to poles is discouraged and shall void the manufacturer’s warranty
• Wind speeds and listed EPAs are for ground mounted installations. Poles mounted on structures (such as bridges and buildings) must consider vibration and coefficient of height factors beyond this general guide; Consult local and federal standards
• Wind Induced Vibration brought on by steady, unidirectional winds and other unpredictable aerodynamic forces are not included in wind velocity ratings. Consult Hubbell Lighting’s Pole Vibration Application Guide for environmental risk factors and design considerations. http://cdn.spauldinglighting.com/content/products/literature/literature_files/Pole_Wind_Induced_Flyer_HLOI0022.pdf
• Extreme Wind Events like, Hurricanes, Typhoons, Cyclones, or Tornadoes may expose poles to flying debris, wind shear or other detrimental effects not included in wind velocity ratings
Due to our continued efforts to improve our products, product specifications are subject to change without notice.
Beacon Products • 2041 58th Avenue Circle East Bradenton, FL 34203 • Phone: 800-345-4928
Due to our continued efforts to improve our products, product specifications are subject to change without notice.
© 2016 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA
RSA-B-MAIM POLES-SPEC 7/16