TECHNICAL DATA
PTX-01
PAINTER’S TOUCH®
ULTRA COVER 2X ENAMEL SPRAYS
.DESCRIPTION AND USES
®
.
.PRODUCTS (cont.)
®
Rust-Oleum Painter’s Touch Ultra Cover 2X Enamel
Sprays are designed to provide long lasting protection and
durability. These sprays apply easily, provide excellent
coverage and dry fast to a tough attractive finish. Painter’s
Touch Ultra Cover 2X Enamel Sprays feature an
advanced spray system that allows you to spray at any
angle, even upside down for those hard to reach areas. A
comfort spray tip with a wider finger pad to reduce fatigue
caused by continuous spraying. Not for use on galvanized
metal.
Satin Finish Unless Otherwise Noted
SKU (112 ounces)
DESCRIPTION
249845
249085
249087
249062
249063
249854
249082
249066
249083
249079
249068
249069
249084
249128
249065
249855
249064
249857
249080
249078
249070
249844
249081
249127
249077
249073
249072
249076
249071
249126
249074
249843
267118
277994
277991
283188
299883
299887
.PRODUCTS
Gloss Finish Unless Otherwise Noted
SKU (12 ounces)
DESCRIPTION
249859
249094
249117
249093
249119
249120
249123
249114
249124
249098
249116
249113
249863
249097
249095
249089
249091
249115
249092
249061
249862
249122
249103
249125
249847
249099
249102
249110
249111
249860
249853
249060
249100
249090
249104
267116
283189
283190
299910
.
Semi-Gloss Clear
Sage Green
Clear
Spa Blue
Candy Pink
Brilliant Blue
Berry Pink
Deep Blue
Apple Red
Navy Blue
Colonial Red
Grape
Cranberry
Purple
Red Orange
Winter Gray
Warm Yellow
Dark Gray
Sun Yellow
Semi-Gloss Black
Marigold
Black
Khaki
Almond
Chestnut
Navajo White
Kona Brown
Ivory
Hunter Green
Semi-Gloss Ivory Bisque
Semi-Gloss Hunter Green
Semi-Gloss White
Meadow Green
White
Key Lime
Seaside
Coral
Ocean Mist
Golden Sunset
Clear
Aqua
Matte Clear
Wildflower Blue
Sweet Pea
Midnight Blue
Colonial Red
Slate Blue
Claret Wine
French Lilac
Paprika
Oregano
Cinnamon
Aluminum
Strawflower
Stone Gray
Summer Squash
London Gray
Fossil
Granite
Nutmeg
Canyon Black
Espresso
Flat Black
Green Apple
Ivory Silk
Leafy Green
Heirloom White
Moss Green
Flat White
Hunt Club Green
Blossom White
Warm Caramel
Poppy Red
Oasis Blue
Magenta
Smokey Beige
Vintage Blush
PRODUCT APPLICATION
.
PAINTING CONDITIONS
Use outdoors or in a well ventilated area such as an open
garage. Use when temperature is between 50-90°F (1032°C) and humidity is below 65% to ensure proper drying.
Do not apply to surfaces, when heated, exceed 200°F
(93°C). Do not apply to galvanized steel. Avoid spraying in
very windy and dusty conditions. Cover surrounding area
to protect from spray mist.
1
Form: GDH-503
Rev.: 101816
TECHNICAL DATA
PAINTER’S TOUCH® ULTRA COVER 2X ENAMEL SPRAYS
PRODUCT APPLICATION (cont.)
.
PRODUCT APPLICATION (cont.)
.
SURFACE PREPARATION
APPLICATION
Remove all dirt, grease, oil, salt and chemical
contaminants by washing the surface with a commercial
detergent or other suitable cleaning method. Rinse
thoroughly with fresh water and allow to thoroughly dry. All
surfaces must be dry at time of application. Remove loose
paint and rust with a wire brush or sandpaper. Lightly sand
glossy surfaces to create a surface profile.
Shake can vigorously for one minute after the mixing ball
begins to rattle. If mixing ball fails to rattle DO NOT
STRIKE CAN. Contact Rust-Oleum. Shake often during
use. Hold can upright 10-16" from surface and spray in a
steady back-and-forth motion, slightly overlapping each
stroke. Keep the can the same distance from the surface.
Keep the can in motion while spraying. Apply two or more
light coats a few minutes apart to avoid drips and runs. Do
not use near open flame.
WARNING! If you scrape, sand or remove old paint from
any surface, you may release lead paint dust. LEAD IS
TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE
SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE;
ESPECIALLY IN CHILDREN. PREGNANT WOMEN
SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH
approved respirator to control lead exposure. Clean up
carefully with a HEPA vacuum and a wet mop. Before you
start, find out how to protect yourself and your family by
contacting the National Lead Information Hotline at 1-800424-LEAD or log on to www.epa.gov/lead.
DRY & RECOAT TIMES
Dry and recoat times are based on 70°F and 50% relative
humidity. Allow more time at cooler temperatures. Dries to
touch in 20 minutes, to handle in 1 hour, and is fully dry in
24 hours. Apply a second coat or Clear coat within 1 hour
or after 48 hours. Apply the clear coat in 2-3 light coats a
few minutes apart.
CLEAN-UP
PRIMING
Wipe off tip before storing. Clean-up wet paint with xylene
or mineral spirits. Properly discard empty container. Do
not burn or place in home trash compactor.
Use of a Painter’s Touch® primer provides excellent
adhesion and hiding and is especially recommended for
bare wood and metal. The following primers are
recommended:
249086
249088
249846
249058
CLOGGING
If the valve clogs, twist and pull off spray tip and rinse in a
solvent such as mineral spirits. Do not insert any object
into can valve opening.
Red Primer
Gray Primer
Black Primer
White Primer
2
Form: GDH-503
Rev.: 101816
TECHNICAL DATA
PAINTER’S TOUCH® ULTRA COVER 2X ENAMEL SPRAYS
.PHYSICAL PROPERTIES
.
ULTRA COVER 2X ENAMEL SPRAYS
Resin Type
Acrylic Modified Alkyd
Pigment Type
Varies with Color
Solvents
Acetone, Toluene, Xylene
Gloss & Non-Flats - 1.4 Max
Flats - 1.20 Max
Clear - 1.50 Max
MIR
Fill Weight
12 ounces
Recommended Dry Film Thickness
(DFT) per Coat
1.0-2.0 mils
(25-50µ)
Practical Coverage at Recommended
DFT (assumes 15% material loss)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
8-12 sq.ft./can
2
(0.74-1.11 m /can)
Touch
20 minutes
Handle
1 hour
Recoat
Within 1 hour or after 48 hours
Dry Heat Resistance
200ºF (93ºC)
Shelf Life
5 years
Flash Point
-156°F (-104°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.
Rust-Oleum Corporation
11 Hawthorn Parkway
Vernon Hills, Illinois 60061
An RPM Company
Phone: 877•385•8155
www.rustoleum.com
Form: GDH-503
Rev.: 101816