-Request for Information 0613
Detailed, RFIs Grouped by RFI Number
Alley 111 Apartments
Project # 4212049-000
Tel:
Fax:
Skanska USA Building Inc.
RFI #: 0613
Date Created: 5/26/2015
Answer Company
Answered By
Author Company
Authored By
GGLO
1301 First Avenue Suite 301
Seattle, WA 98101
Kevin Reed
Skanska USA Building Inc.
929 109th Ave NE
Bellevue, WA 98004
Margot vanSwearingen
Co-Respondent
Author RFI Number
Subject
Discipline
Recessed PT Dispenser at C1P1 Restrooms
Architectural
Cc:
Company Name
Contact Name
Category
Copies
Notes
Question
Date Required: 6/2/2015
Please refer to the Men's and Women's Restrooms (C108 & C109) on Enlarged Plan A-401-C, restroom wall elevations A3
& A5/A-472, as well as attached product data for the specified recessed paper towel dispenser (Bobrick B-3944), reviewed
and approved with Submittal 102813-0093-1. The paper towel dispensers are located back to back in the stud cavity, each
requiring a 4-inch minimum recessed depth, i.e. 8-inches of wall thickness required overall. However, the wall type
between the restrooms is type 'C3d' which has an overall thickness of 7.25".
Please advise.
Suggestion
Possible solutions include: offset the fixtures so they are not back-to-back in the wall, add a layer of GWB to each side of
the wall thereby increasing the overall thickness to 8.5", or remove the installed 6" wall framing and increase to an 8" stud.
Answer
Date Answered:
Add layer of GWB to each side of the wall. Maintain locations of PT dispensers.
J. Templeton (GGLO) 5/27/2015
Prolog Manager
Printed on: 5/26/2015
6west
Page 1 of 1
ClassicSeries®
RECESSED CONVERTIBLE
PAPER TOWEL DISPENSER
AND WASTE RECEPTACLE
Technical Data
B-3944
Finish Face of Wall
4''
100mm
17-3/16''
1''
3/16''
25mm
S
5mm
Typ.
S
460mm
S
S
Paper Towel
Dispenser
S
54-3/32''
1373mm
Locks & Key
56''
1422mm
Removable
Waste
Receptacle
48''
1220mm
Maximum
23''
Mounting
584mm
Height
(Refer to ADA H/C)
1''
66'' to 73'' 1675 to 1855mm
18-1/8''
Recommended Mounting Height Off Floor
Door
59-1/2'' 1510mm
S
Recommended Mounting Height Off Floor
For Accessible Design
437mm
25mm
Typ.
2-15/16''
1-15/16''
12''
320mm
S
S
49mm
15-3/16''
386mm
4-1/8''
S
75mm
105mm
Finish Face of Floor
Rough Wall Opening
16" (406mm) wide
54-3/4" (1390mm) high
4" (100mm) minimum
recessed depth
MATERIALS:
Cabinet — 18-8, type-304, heavy-gauge stainless steel. Welded construction. Exposed surfaces have satin-finish.
Flange — 18-8, type-304, 22-gauge (0.8mm) stainless steel with satin-finish. Drawn and beveled, one-piece, seamless
construction.
Door — 18-8, type-304, 22-gauge (0.8mm) stainless steel with satin-finish. Double-pan-back construction. Secured to cabinet
with a full-length stainless steel piano-hinge. Equipped with a semi-concealed tumbler lock keyed like other Bobrick washroom
accessories.
Paper Towel Dispenser — 18-8, type-304, 22-gauge (0.8mm) stainless steel with satin-finish. Rounded towel tray has
hemmed opening to dispense paper towels without tearing. Capacity: 600 C-fold or 800 multifold paper towels.
Optional: Order Bobrick Model No. 3944-130 TowelMate® available as on optional accessory. TowelMate accessory allows
for paper towels to dispense one at a time without bulging or sagging, or falling through the towel tray opening. The 90 degree
return on the towel guide prevents papers from falling forward and out when door is opened for servicing. TowelMate fits
Gamco and most other manufacturers'.
continued . . .
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions.
Revised 8/05/13
Printed in U.S.A.
© 2013 by Bobrick Washroom Equipment, Inc.
Waste Receptacle — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin-finish. Front and sides of bottom and all top
edges are hemmed for safe handling. Secured to cabinet with a tumbler lock keyed like other Bobrick washroom accessories.
Capacity: 12-gal. (45.5-L).
OPERATION:
Paper towel dispenser accommodates C-fold or multifold paper towels without adjustment or use of adapters. To adapt to
changing needs of washrooms, this unit is field convertible with the Universal, Touch-Free Roll Towel Dispenser or Universal,
Automatic Roll Towel Dispenser. To order convertible modules, reference part numbers below under Options.
To empty waste receptacle, unlock with key provided.
NOTE: To accommodate disposable trash liners, order LinerMate®, sold as an optional accessory item. LinerMate eliminates
unsightly trash liner overhang and facilitates installation and removal of disposable trash liners in the 12-gallon waste
receptacle.
Options:
• Universal Touch-Free Roll Towel Dispenser Module convertible in field: order Bobrick Part No. 3961-50.
• Automatic, Universal Roll Towel Dispenser Module convertible in field: order Bobrick Part No. 3974-50.
• LinerMate for 12-gal waste only: order Bobrick Part No. 3944-134.
• 18-gallon Waste Receptacle: order Bobrick Part No. 368-60, with reusable vinyl liner Part No. 368-16.
INSTALLATION:
Provide framed rough wall opening 16" wide x 54-3/4" high (406 x 1390mm). Minimum recessed depth required to finish face
of wall is 4" (102mm). Allow clearance for construction features that may protrude into rough wall opening from opposite wall.
Coordinate with mechanical engineer to avoid pipes, vents, and conduits. If unit projects above top of wainscot, provide aluminum
channel or other filler to eliminate gap between flange and finish face of wall. Mount unit in wall opening with shims between
framing and cabinet at all points indicated by an S, then secure unit with #8 x 1-1/4" (4.2 x 32mm) sheet-metal screws (not
furnished).
SPECIFICATION:
Recessed convertible paper towel dispenser and waste receptacle shall be type-304 stainless steel with welded construction;
exposed surfaces shall have satin finish. Flange shall be drawn and beveled, one-piece, seamless construction. Door shall be
secured to cabinet with a full-length stainless steel piano-hinge and equipped with a semi-concealed tumbler lock keyed like
other Bobrick washroom accessories. Paper towel dispenser shall dispense 600 C-fold or 800 multifold paper towels. Removable
waste receptacle shall be secured to cabinet with a tumbler lock, have front and side edges of bottom and all top edges hemmed
for safe handling, and shall have a minimum capacity of 12-gal. (45.5-L).
Recessed Convertible Paper Towel Dispenser And Waste Receptacle shall be Model B-3944 of Bobrick Washroom
Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom
Equipment Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick
Washroom Equipment Limited, United Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions.
Rev. 8/05/13
Printed in U.S.A.
© 2013 by Bobrick Washroom Equipment, Inc.