GE
Security
Integrated Access Control
and Digital Video
ACUVisionTM
A Single Panel, Cost-effective Solution
for Diamond II Users
Overview
Standard Features
GE’s ACUVision offers a single panel platform for access control,
alarm monitoring and digital recording. This approach offers the
best of both worlds by combining all GE DVMRe (triplex) network
DVR capabilities with the Diamond II ACUXL intelligent access
control and alarm monitoring panel functionality into a single
IP solution.
• Multiplexer functionality with built-in digital recording
In combination with GE’s ACUVision, Diamond II system owners can
now get combined digital video monitoring/recording/playback,
access control and intrusion detection functionality in a single
panel solution. With this truly integrated digital video recording and
access control platform, GE provides the ability to display live and
stored video associated with alarm conditions and cardholder
activity within the Diamond II system architecture.
• A printed circuit board assembly that supports communication with
downstream ACU panels, RRE reader interface boards, RIM alarm input
modules, and RRM remote relay modules
• Supports up to 16 readers
• Supports up to 16 standard or PTZ cameras
• Remote PTZ camera control
• Record rate of up to 48 pps (system total for all cameras)
• Record speed selectable per camera
• Each unit allows up to 150 input points and 134 output points.
• Each unit interfaces with up to 8 expansion modules, Remote Input
modules (RIM)/Remote Relay Modules (RRM)
• Access control capabilities supporting up to 50,000 cards
• Direct LAN or WAN connectivity
• Ability to multi-drop up to 15 additional ACUX panels downstream from
the onboard RS-485 port (4 to 6 recommended)
• Auto-detect video on start-up
• Continuous recording with simultaneous archiving
• View live or recorded images remotely using WaveReader software
• Motion search
• Integrated WaveBrowser software
• Up to four hard drives totaling one Terabyte of storage capacity
• Multi-level password protection
• Flash technology for DVMRe / ACUXL updates
GE
Security
ACUVision
Single IP Solution for a Lower Total Cost
of Ownership
Specifications
This single IP solution, supported within the Diamond II architecture, is a cost-effective alternative that allows live and stored
video associated with alarm conditions, as well as cardholder
activity, to display. Designed to lower your total cost of ownership it
is easier to service and support. As an integrated technology, GE’s
solution requires one integrator for installation of both access
control and digital video. Additionally, this economical solution can
be used to fulfill the access control and digital video require-ments
of remotely located facilities.
A Single Database to Manage Multiple Recorders
and Cameras
A combined Diamond II / ACUVision solution is a network of recorders
and cameras communicating over a LAN or WAN utilizing the same
database. The system can consist of one or many recorders,
connected to hundreds of cameras, each of which can be independently set up to respond with different recording criteria.
The database contains setup information relating to cardholders,
alarms and cameras. When an alarm occurs, the video recording
that is linked to the event begins several seconds prior to the alarm
event trigger, allowing the user to instantly see the actual event not
just the aftermath.
Embedded OS Technologies
General Specifications
• Dimensions
Height: 27.0 in (68.58 cm)
Width: 20.5 in (52.07 cm)
Depth: 8.0 in (20.32 cm)
• Weight
With Electronics: 85 lb (21kg)
Without Electronics: 26 lb (12.8kg)
• Environmental
Maximum Temperature: +120°F (+49°C)
Minimum Temperature: +32°F (0°C)
Humidity: 0 to 95% Relative (non-condensing)
• Input Power Voltage
100-240 VAC, 50/60 Hz
• Maximum Input Current
2, 8 A, 300 W @ 120 VAC
• Battery Backup
(Optional) 4 Hours minimum with 6 12 V 7AH Batteries
Software Requirements
• Diamond II v.2.3 or higher
Embedded OS technology improves performance and reliability with
enhanced logic implementation to continually tag video with the
associated alarm events, even in an offline condition from the host.
A Modular Design for Reduced Footprint and
Lower Installation Costs
PTZ Multi-drop or Star Configuration*
10/100 Hub
Its modular design reduces space requirements by offering all power
and terminal connectors for the reader and expansion module electronics in one uniform wall mount enclosure that integrates the
DVMRe / ACUXL components with a single CAT-5 type cable. This
reduction in space is also accompanied by a reduction in time to
install and maintain the system.
Digital Video
Recorder
Intelligent
Controller
other
ACU's
Total
Cameras
GE
Security
791 Park of Commerce Blvd., Suite 100
Boca Raton, FL 33487
USA
T +1 561 998 6100
T +1 800 428 2733
F +1 561 994 6572
External
24 VDC
Power Supply
Magnetic Door
Contact Switch
(MDS)
RRE
RRE
Service and support: +1 888 GESECURITY (437-3287)
(located on
secure side
of door)
to Alarm
Inputs
Electric Door
Strike (EDS)
Visit us online at:
www.gesecurity.com
©2005 General Electric Company
All Rights Reserved.
Server
Request to Exit
(REX) (st secured
side to deactivate
electric door strike)
Barcode, barium
ferrite, magnetic
stripe,proximity,
smart card,
biometric or
Wiegand
See the ACU, RRE, RIM and RRM module data sheets for further information.
*Requires NCEX-1 or NCEX-2 star hub converter.