TM
PictureCube Exhibit System
INSTRUCTIONS
Table of Contents
Cross Brace Assembly ............................................. 7
Fabric Panel ........................................................... 7
Hang Corner .......................................................... 8
Anti-Rotation Connector ........................................... 8
Internal Lighting
Configurations for Standard Kits ............................... 9
1-Light Assemblies for Rectangles & Cubes ............... 10
2-Light & 3-Light Assemblies for Rectangles & Cubes .. 11
2-Light & 3-Light Assemblies Diamonds..................... 12
Standard Kits..........................................................2-3
Assembly .................................................................. 4
Primary Components
Corner Connector ................................................... 5
Straight Connector .................................................. 5
Top Light Bracket ..................................................... 5
Hang/Foot Assembly ............................................... 5
Center Foot ............................................................ 6
Vertical Brace Assembly ........................................... 6
Packing & Unpacking
Six 46”Extrusions Max.
PictureCube Extrusions
Save Boxes
for Repacking
Save Boxes
for Repacking
4.5”
4.5”
8”
5”
17.5”
11.75”
2-Light Assembly
1-Light Assembly
Save Box
for Repacking
Save Boxes
for Repacking
4.5”
6”
5”
10”
11.75”
12”
Corner Connectors
3-Light Assembly
PictureCube is a trademark of Skyline Exhibits
Patents Pending
©2010 Skyline Exhibits
1
PN 34063-A
TM
PictureCube Exhibit System
INSTRUCTIONS
Standard Kits
19”
46”
42”
42”
42”
46”
19”
42”
46”
42”
42”
19”
46” x 46” x 46” CUBE
46” x 46” x 46” DIAMOND
69” x 69” x 69” CUBE
42”
19”
42”
42”
19”
42”
19”
42”
42”
46”
46”
42”
19”
46”
19”
46”
42”
46”
69” x 69” x 69” DIAMOND
23” x 23” x 92”
46” x 46” x 92”
46” x 46” x 88”
42”
42”
42”
42”
46”
42”
42”
46”
42”
42”
46”
46”
46”
46”
42”
42”
19”
19”
46” x 46” x 115”
PictureCube is a trademark of Skyline Exhibits
Patents Pending
©2010 Skyline Exhibits
46”
46”
46”
46”
46” x 46” x 138”
46” x 46” x 161”
2
46” x 46” x 184”
PN 34063-A
TM
PictureCube Exhibit System
INSTRUCTIONS
Standard Kits (continued)
46”
19”
46”
19”
46”
42”
42”
46”
46”
115” x 22” x 92”
46”
19”
42”
115” x 46” x 92”
42”
46”
42”
46”
46”
42”
42”
42”
46”
42”
46”
92” x 92” x 46”
92” x 92” x 92”
PictureCube is a trademark of Skyline Exhibits
Patents Pending
©2010 Skyline Exhibits
3
PN 34063-A
TM
PictureCube Exhibit System
INSTRUCTIONS
Assembly
Corner
Connector
PictureCube
Extrusion
PictureCube
Extrusion
Straight
Connector
Corner
Connector
Corner Connector
Hang/Foot Assembly
Corner
Connector
PictureCube
Extrusion
Vertical Brace
Assembly
Straight
Connector
Cross Brace
Assembly
Straight
Connector
PictureCube
Extrusion
Center Foot
Hang/Foot Assembly
PictureCube is a trademark of Skyline Exhibits
Patents Pending
©2010 Skyline Exhibits
4
PN 34063-A
TM
PictureCube Exhibit System
INSTRUCTIONS
Corner Connector
Hang/Foot Assembly
For Cube & Rectangle Kits Only.
Install for Hanging
3
1
Straight Connector
2
Install as Foot
3
Top Light Bracket
1
side view
(installed)
2
Use with:
• CMH Lights (shown)
• MR 16 Lights
• 200W Halogen Lights
• SkyTrak Lights
PictureCube is a trademark of Skyline Exhibits
Patents Pending
©2010 Skyline Exhibits
4
5
PN 34063-A
TM
PictureCube Exhibit System
INSTRUCTIONS
Vertical Brace Assembly
Center Foot
Supplied with 115” x 23” x 92” and 115” x 46” x 92” Kits Only.
Supplied with 115” x 23” x 92” and 115” x 46”’x 92” Kits Only.
PictureCube to Truss
45° Connector
(qty 4)
1
2
2
PictureCube to Truss Connector Installation
PictureCube is a trademark of Skyline Exhibits
Patents Pending
©2010 Skyline Exhibits
6
PN 34063-A
TM
PictureCube Exhibit System
Cross Brace Assembly
INSTRUCTIONS
2
Supplied with 46” x 46” x 161” and
46” x 46” x 184” Kits Only.
PictureCube
to Truss
Connector
Installation
1
2
PictureCube to Truss
90° Connector
(qty 4)
Fabric Panel
1. Start at the upper corner
of the assembly by
pressing the edge of the
panel into the extrusion.
Work the panel edge into
the entire length of the
upper extrusion.
2. Work the panel edge
into each of the side
extrusions about 1/3 the
way down.
3. Work the panel edge into
the entire length of the
lower extrusion.
4. Work the panel edge
into each of the side
extrusions about the rest
of the way down.
5. Repeat for each side of
the PictureCube.
PictureCube is a trademark of Skyline Exhibits
Patents Pending
©2010 Skyline Exhibits
1
Fabric
Panel
2
2
4
Fabric
Panel
4
PictureCube Extrusion
3
Pull Tab
(use to remove panel)
7
PN 34063-A
TM
PictureCube Exhibit System
INSTRUCTIONS
Hang Corner Connector
Supplied with Diamond Kits.
Cable
(not supplied)
Anti-Rotation Connector
Supplied with Diamond Kits.
WARNING: DO NOT hang PictureCube assemblies from Anti-Rotation Connectors.
Use Only Hang Plates and Hang Corner Connectors to hang Picture Cube Assemblies.
Tether
(not supplied)
Remove Existing
Screw
PictureCube is a trademark of Skyline Exhibits
Patents Pending
©2010 Skyline Exhibits
8
PN 34063-A
TM
PictureCube Exhibit System
INSTRUCTIONS
Internal Lighting
1-Light Assemblies
2-Light Assemblies
Multiple single bulb internal light assemblies may be
strung together as shown.
x3
x3
x3
23” x 23” x 92” 46” x 46” x 88”
46” x 46” x 46” Cube
x4
46” x 46” x 92”
46” x 46” x 46” Diamond
46” x 46” x 115”
92” x 92” x 46”
3-Light Assemblies
x7
x5
x6
46” x 46” x 138” 46” x 46” x 161”
46” x 46” x 184”
69” x 69” x 69” Cube
x3
x3
x3
x3
x3
115” x 46” x 92”
115” x 23” x 92”
x3
x3
69” x 69” x 69” Diamond
x3
x3
x3
92” x 92” x 92” Cube
PictureCube is a trademark of Skyline Exhibits
Patents Pending
©2010 Skyline Exhibits
9
PN 34063-A
TM
PictureCube Exhibit System
INSTRUCTIONS
Internal Lighting - 1-Light Assemblies for Rectangles & Cubes
1
Main Power Cord
2
8 lb. load max
2
PictureCube to Truss Connector
Installation (inverted view)
PictureCube is a trademark of Skyline Exhibits
Patents Pending
©2010 Skyline Exhibits
PictureCube to Truss
45° Connector
(qty 2)
10
PN 34063-A
TM
PictureCube Exhibit System
INSTRUCTIONS
Internal Lighting - 2-Light & 3-Light Assemblies for Rectangles & Cubes
Main Power Cord
1
For 69” x 69” x 69”
Cube Kits Only:
Use cable and
additional carabiner
supplied here.
2
2
PictureCube to Truss Connector
Installation (inverted view)
PictureCube to Truss
45° Connector
(qty 2)
OR
Use with 92” x 92” x 46”
Rectangle &
46” x 46” x 46”
Cube Kits Only.
PictureCube is a trademark of Skyline Exhibits
Patents Pending
©2010 Skyline Exhibits
11
Use with 69” x 69” x 69”
Cube Kits Only.
PN 34063-A
TM
PictureCube Exhibit System
INSTRUCTIONS
Internal Lighting - 2-Light & 3-Light Assemblies for Diamonds
Main Power Cord
Use with 46” x 46” x 46”
Diamond Kits Only.
PictureCube is a trademark of Skyline Exhibits
Patents Pending
©2010 Skyline Exhibits
Use with 69” x 69” x 69”
Diamond Kits Only.
12
PN 34063-A