ADP SERIES
ADP series, one of most techonogically advanced sound
products available on the market
www.lynxproaudio.com
www.lynxproaudio.com
ADP SERIES
ADP SERIES
The ADP range of cabinets offer one of the most
technologically advanced sound products available on
the market. Designed for both portable and permanent
installations the series includes four full range cabinets,
ADP-26, ADP-12, ADP-15 and ADP-215, two stage
monitors, ADP-12M and ADP-15M and one sub-bass
cabinet, ADP-18S. The series has been designed to
offer the utmost sound reinforcement reliability,
incorporating the latest acoustical and electronical
technology and delivering incredible, dynamic sound.
The ADP Series has been designed to offer high levels
of SPL and sound clarity whilst maintaining a compact
and portable design to offer an unbeatable power to
size ratio. All ADP series cabinets include class D
amplification, with switching power supply. The
integrated amplification far exceeds the transducersí
needs thus resulting in high output, high damping
factor and extremely low levels of distortion. Selfpowered cabinets are a must for portable sound and
the ADP series have been designed with this in mind
offering a tour-friendly range for quick and easy setups and with no need for heavy, external amplification
racks.
All ADP Series cabinets are controlled by the latest
generation of Digital Signal Processing with a DSP
www.lynxproaudio.com
integrated in to each cabinet. This DSP, with 56bit
internal processing and double dynamics optimizes all
the system components and electronics, providing
maximum system efficiency and total protection whilst
significantly and noticeably lowering distortion.
All components are carefully selected to ensure maximum
sound quality. All our transducers are custom made,
neodymium with NOMEX cones and suspension. This
means they are not only much lighter but also have
much greater longevity than a traditional speaker,
achieving excellent transparency and constant sound
clarity.
All the ADP HF drivers are equipped with neodymium
ring magnet structure, pure titanium diaphragm assembly
and copper short cap for extended frequency response.
A variety of accessories and rigging options enable the
cabinets to be set-up in record time.
For simulation and planning Rainbow Prediction software
is available free of charge to all Lynx Pro Audio users.
Rainbow offers an accurate prediction for any sound
reinforcement project with both horizontal and vertical
planning available.
www.lynxproaudio.com
ADP-15 ADP SERIES
ADP SERIES ADP-215
High Output, self powered class D switch mode power supply,
two-way cabinet. Consists of two 15” neodymium magnet
transducers with nomex cones & suspension and a 1.4” exit
compression driver with titanium diaphragm, mounted on a
80ºH x 50ºV constant directivity horn. DSP controlled with
2500W amplification, 140dB SPL.
FREQUENCY RANGE
FREQUENCY RESPONSE
COVERAGE
MAX SPL
TRANSDUCERS
POWER AMPLIFIER
DSP
CABINET ADJUSTMENT
INTERNAL CONTROLS
SIGNAL CONNECTION
CONTROL CONNECTIONS
AC POWER
AC CONNECTIONS
SHAPE
CONSTRUCTION
FINISH
FRONT DESIGN
DIMENSIONS (H x W x D)
WEIGHT
* Ethernet connection is optional.
www.lynxproaudio.com
40Hz - 20KHz
45Hz - 18KHz ± 3dB
80º x 50º rotable horn
140 dB/ 143dB peak 1w@ 1m
LF/MF: 2 x 15” (100mm voice coil),
Custom Nomex Cone with Neodymium
magnets
HF: 1.4” exit throat driver, 72.2mm
Titanium diaphragm, Neodymium
magnets + constant directivity Horn
2500W Class D with Switching Power
supply
2 Channels / 3 power modules
2 x 1000W Low/Mid + 500W High
Internal VMB digital processor
DSPB-22®
Back panel LCD screen
Temperature sensor / Fan Speed
control
NEUTRIK connectors XLR Male Input
XLR Female Loop Thru
USB (DSP programming), ETHERNET*
(Online Monitoring System OMS®)
230v / 115v selectable. 50/60 Hz 5A
16A NEUTRIK POWERCON
with Link output
Trapezoidal
15 mm Premium Birch plywood
High resistant water-based black paint
Black stainless steel grill
1107 x 489 x 415 mm
52 Kg (114 lbs)
High Output, self powered class D switch mode power supply,
two-way cabinet. Consists of a 15” neodymium magnet
transducer with nomex cones & suspension and a compression
driver with a 1.75” titanium diaphragm mounted on a 80ºH
x 50ºV exponential horn. DSP controlled with 1500W
amplification, 133dB SPL.
FREQUENCY RANGE
FREQUENCY RESPONSE
COVERAGE
MAX SPL
TRANSDUCERS
POWER AMPLIFIER
DSP
CABINET ADJUSTMENT
INTERNAL CONTROLS
SIGNAL CONNECTION
CONTROL CONNECTIONS
AC POWER
AC CONNECTIONS
SHAPE
CONSTRUCTION
FINISH
FRONT DESIGN
DIMENSIONS (H x W x D)
WEIGHT
60Hz - 20KHz
70Hz - 18KHz ± 3dB
80º H x 50º V
133 dB/ 136dB peak 1w@ 1m
LF/MF: 15” (100mm Voice Coil),
Custom Nomex Cone with Neodymium
magnet
HF: 1” exit throat driver with 44mm
Titanium diaphragm and Neodymium
magnet + exponential Horn
1500W Class D with Switching
Power supply
1000W Low/Mid + 500W High
Internal VMB digital processor
DSPB-22®
Back panel LCD screen
Temperature sensor
NEUTRIK connectors XLR Male Input
with XLR Female Loop Thru
USB (DSP programming), ETHERNET*
(Online Monitoring System OMS®)
230v / 115v selectable. 50/60 Hz 5A
16A NEUTRIK POWERCON
with Link output
Trapezoidal
15 mm Premium Birch plywood
High resistant water-based black paint
Black stainless steel grill
675 x 489 x 385 mm
33 Kg (73 lbs)
* Ethernet connection is optional.
www.lynxproaudio.com
ADP-26 ADP SERIES
ADP SERIES ADP-12
www.lynxproaudio.com
High Output, self powered class D switch mode power supply,
two-way cabinet. Consists of a 12” (4” voice coil) neodymium
magnet transducer with nomex cones and a compression
driver with a 4” titanium diaphragm mounted on a 80ºH x
50ºV constant directivity exponential horn. DSP controlled
with 1500W amplification, 136dB SPL.
High Output, self powered class D switch mode power supply,
two-way cabinet. Consists of two 6” (1.5” voice coil) neodymium magnet transducers with aluminium demodulating
rings and a 1” exit compression driver with titanium diaphragm, mounted on a 90ºH x 60ºV exponential horn. DSP
controlled with 1500W amplification, 127dB SPL.
FREQUENCY RANGE 60Hz- 20KHz
FREQUENCY RESPONSE 65Hz- 18KHz ± 3dB.
COVERAGE Rotatable 80º x 50º
MAX SPL 133dB/ 136dB peak 1w@ 1m
TRANSDUCERS LF: 1 x 12” (100 mm voice coil)
4 Ohm, NOMEX cone and suspension, Neodymium magnets
HF: 1 x 1,4” exit throat, 4” Titanium Diaphragm Neodymium magnet 8 Ohm
POWER AMPLIFIER 1500W Class D with Switching Power supply
LF: 1 x 750W
HF: 1 x 750W
DSP Internal Lynx digital processor DSPB-22®
CABINET ADJUSTMENT Back panel LCD screen
INTERNAL CONTROLS Temperature sensor
SIGNAL CONNECTION NEUTRIK connectors XLR Male Input and NEUTRIK XLR Female Loop Thru
CONTROL CONNECTIONS USB (DSP programming),
ETHERNET*
(Online Monitoring System OMS®)
AC POWER 230V/115V AC selectable.
50/60 Hz 5A
AC CONNECTIONS 16A NEUTRIK POWERCON
with Link Output
SHAPE Trapezoidal
CONSTRUCTION 15 mm Premium Birch plywood
FINISH High resistant water-based
black paint
FRONT DESIGN Antirush Black metal grille
DIMENSIONS (H x W x D) 637 x 376 x 411 mm
WEIGHT 28Kg (62 lbs)
FREQUENCY RANGE 65Hz- 20KHz
FREQUENCY RESPONSE 75Hz- 18KHz ± 3dB.
COVERAGE 90º H x 60º rotatable
MAX SPL 124dB/ 127dB peak 1w@ 1m
TRANSDUCERS LF: 2 x 6” (38 mm voice coil)
8 Ohm, Rubber suspensión
and Neodymium magnets
HF: 1 x 1” exit throat, 1.7” Titanium Diaphragm Neodymium magnet 8 Ohm
POWER AMPLIFIER 1500W Class D with Switching
Power supply
LF: 1 x 750W
HF: 1 x 750W
DSP Internal Lynx digital processor
DSPB-22®
CABINET ADJUSTMENT Back panel LCD screen
INTERNAL CONTROLS Temperature sensor
SIGNAL CONNECTION NEUTRIK connectors XLR Male Input and NEUTRIK XLR Female Loop Thru
CONTROL CONNECTIONS USB (DSP programming),
ETHERNET*
(Online Monitoring System OMS®)
AC POWER 230V/115V AC selectable.
50/60 Hz 5A
AC CONNECTIONS 16A NEUTRIK POWERCON
with Link Output
SHAPE Trapezoidal
CONSTRUCTION 15 mm Premium Birch plywood
FINISH High resistant water-based
black paint
FRONT DESIGN Antirush Black metal grille
DIMENSIONS (H x W x D) 530 x 222 x 269 mm
WEIGHT 13Kg (28 lbs)
* Ethernet connection is optional.
* Ethernet connection is optional.
www.lynxproaudio.com
ADP-12M ADP SERIES
ADP SERIES ADP-15M
High output, self powered class D switch mode power supply,
two-way stage monitor. Consists of a 15” coaxial neodymium
magnet transducer with nomex cone & suspension and a
compression driver with a 1.4” titanium diaphragm with 90º
conic dispersion. DSP controlled with 1500W amplification,
130dB SPL.
FREQUENCY RANGE
FREQUENCY RESPONSE
COVERAGE H x V
MAX SPL
TRANSDUCERS
POWER AMPLIFIER
DSP
CABINET ADJUSTMENT
INTERNAL CONTROLS
SIGNAL CONNECTION
CONTROL CONNECTIONS
AC POWER
AC CONNECTIONS
SHAPE
CONSTRUCTION
FINISH
FRONT DESIGN
DIMENSIONS (H x W x D)
WEIGHT
* Ethernet connection is optional.
www.lynxproaudio.com
60Hz - 20KHz
70Hz - 18KHz ± 3dB
90º H x 90º V
130 dB/ 133dB peak 1w@ 1m
LF/MF: 15” (75mm voice coil) coaxial,
Custom Nomex cone, Neodymium
magnets
HF: 1.4” exit throat driver, 72.2mm
Titanium diaphragm, Neodymium
magnets
1500W Class D with Switching
Power supply
1000W Low/Mid + 500W High
Internal VMB digital processor
DSPB-22®
Back panel LCD screen
Temperature sensor
NEUTRIK connectors XLR Male Input
with XLR Female Loop Thru
USB (DSP programming), ETHERNET*
(Online Monitoring System OMS®)
230v / 115v selectable. 50/60 Hz 5A
16A NEUTRIK POWERCON with Link
Output
Trapezoidal
15 mm Premium Birch plywood
High resistant water-based black paint
Black stainless steel grill
434 x 620 x 618 mm
26 Kg (57 lbs)
High output, self powered class D switch mode power
supply, two-way stage monitor. Consists of a 12” (4” voice
coil) coaxial transducer with demodulating rings and a 2.8”
VC compression driver with a a titanium/mylar diaphragm
with 60º conic dispersion horn. DSP controlled with 2000W
amplification, 132dB SPL.
REQUENCY RANGE 60Hz- 20KHz
FREQUENCY RESPONSE 75Hz- 18KHz ± 3dB.
COVERAGE 60º Conical dispersion horn
MAX SPL 129dB/ 132dB peak 1w@ 1m
TRANSDUCERS LF: 1 x 12” (100 mm voice coil)
8 Ohm, Neodymium magnets
HF: 1 x 1,4” exit throat,
4” Titanium Diaphragm Neodymium magnet 8 Ohm
POWER AMPLIFIER 2000W Class D with Switching Power supply
LF: 1 x 1000W
HF: 1 x 1000W
DSP Internal Lynx digital processor DSPB-22®
CABINET ADJUSTMENT Back panel LCD screen
INTERNAL CONTROLS Temperature sensor
SIGNAL CONNECTION NEUTRIK connectors XLR Male Input and NEUTRIK XLR Female Loop Thru
CONTROL CONNECTIONS USB (DSP programming),
ETHERNET*
(Online Monitoring System OMS®)
AC POWER 230V/115V AC selectable.
50/60 Hz 5A
AC CONNECTIONS 16A NEUTRIK POWERCON
with Link Output
SHAPE Trapezoidal
CONSTRUCTION 15 mm Premium Birch plywood
FINISH High resistant water-based
black paint
FRONT DESIGN Antirush Black metal grille
DIMENSIONS (H x W x D) 370 x 470 x 554 mm
WEIGHT 20Kg (44 lbs)
* Ethernet connection is optional.
www.lynxproaudio.com
ADP-18S ADP SERIES
High output, self powered class D switch mode power supply
direct radiation sub bass cabinet. Consists of an 18” neodymium
magnet transducer with nomex cone & suspension. DSP
controlled with 1000W amplification, 133dB SPL.
FREQUENCY RANGE
FREQUENCY RESPONSE
COVERAGE
MAX SPL
TRANSDUCERS
CONFIGURATION
POWER AMPLIFIER
DSP
CABINET ADJUSTMENT
INTERNAL CONTROLS
SIGNAL CONNECTION
CONTROL CONNECTIONS
AC POWER
AC CONNECTIONS
CONSTRUCTION
FINISH
FRONT DESIGN
DIMENSIONS (H x W x D)
WEIGHT
30Hz - 250Hz
35Hz - 150Hz ± 3dB
360º (one unit)
133 dB/ 136dB peak 1w@ 1m
18” (100mm voice coil), Custom
Nomex with Neodymium magnets
Bass-reflex, Direct radiation
1000W Class D with Switching Power
supply
Internal VMB digital processor
DSPB-22®
Back panel LCD screen
Temperature sensor
NEUTRIK connectors XLR Male Input
with XLR Female Loop Thru
USB (DSP programming), ETHERNET*
(Online Monitoring System OMS®)
230v / 115v selectable. 50/60 Hz 5A
16A NEUTRIK POWERCON with Link
Output
18 mm Premium Birch plywood
High resistant water-based black paint
Black stainless steel grill
707 x 525 x 618 mm
51 Kg (112 lbs)
* Ethernet connection is optional.
www.lynxproaudio.com
www.lynxproaudio.com
ADP SERIES ACCESSORIES
>
AGR-6
>
SB-02
M6 eye bolt for the ADP-26
35mm Lightweight aluminium
stand for the ADP-15 / ADP-12
/ ADP-26
>
WB - 03
>
TU-C01
Wall bracket for the ADP-15 /
ADP-12 / ADP-26 for top hat
insertion
35mm connecting pole for
satellite combination between
ADP-18S and ADP-15 / ADP-12
/ ADP-26. With spring-loaded
locking screw and safety bolt
>
SC-FC2
>
TU-C02
Heavyweight Install stud for
the ADP-15 and ADP-215
M20 Pole support for
combination between ADP-18S
and ADP-15 / ADP-12 /
ADP-26. With spring-loaded
locking screw and safety bolt
>
SC-FC1
>
FD-ADP15NL
FD-ADP18NL
FD-ADP215NL
FD-ADP12NL
Lightweight Install stud for
the ADP-15 or ADP-12
Rain cover
(For ADP-15, ADP-12, ADP-18S or
ADP-215)
>
VSM-V1
>
FD-ADP215
35mm Speaker mounting top
hat for ADP-15 / ADP-12 /
ADP-26 with the ADP-18S
Nylon transport protection cover
for the ADP-215
>
VSM-V2
>
FC-15MX2
FC-12MX2
M20 Connector plate for the
ADP-18S
www.lynxproaudio.com
Flight case to transport two
ADP-15M / ADP-12M
www.lynxproaudio.com