Features

Consistent output - convenient mounting
When convenient mounting and consistent output are the primary requirements, we have created
the d:screet™ Necklace Microphone. The mic features our legendary d:screet 4061 omnidirectional
miniature capsule in a soft rubber necklace offering fast, repeatable and “do-it-yourself” mounting.
Designed for mounting by non-technicians, the necklace is the perfect choice in for instance a reality
show setting. The d:screet Necklace Microphone comes in 3 colors and 2 lengths.
Features
• Plug and play mounting
• Minimal visual impact
• Consistent output
• Adapts to all pro wireless systems
www.dpamicrophones.com/dscreet
dpi-necklace-f
Specifications
Directional characteristics:
Omnidirectional
Principle of operation:
Pressure
Cartridge type:
Pre-polarized condenser element with vertical diaphragm
Frequency range, ± 2 dB:
High boost grid: 20 Hz – 20 kHz, 10 dB boost at 12 kHz
Sensitivity, nominal, ± 3 dB at 1 kHz:
6 mV/Pa; -44 dB re. 1 V/Pa
Equivalent noise level, A-weighted:
Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
Equivalent noise level, ITU-R BS.468-4:
Typ. 38 dB (max. 40 dB)
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL):
68 dB(A)
Total Harmonic Distortion (THD):
<1 % up to 123 dB SPL peak; <1 % up to 120 dB SPL RMS sine
Dynamic range:
Typ. 97 dB
Max. SPL, peak before clipping:
144 dB
Output impedance:
30 – 40 Ω
Cable drive capability:
Up to 300 m (984 ft)
Frequency Response
Power supply:
For wireless systems: Min. 5 V to max. 50 V through DPA adapter.
With DPA XLR adapter: 48 V phantom power ± 4 V.
Connector:
MicroDot
Microphone weight:
17 g incl. cable and MicroDot connector.
Microphone diameter:
5.4 mm (0.21 in)
Microphone length:
12.7 mm (0.5 in)
Necklace lenght:
47 and 53 cm (18.5 and 20.7 in)
Cable length:
1.1 m (3.6 ft)
Cable diameter: 1.6 mm (0.06 in)
Color:
Black, brown, white
Polarity: Positively increasing sound pressure produces positive going voltage on
MicroDot pin
Polar Pattern
5
80 Hz
125 Hz
250 Hz
500 Hz
1 kHz
8 kHz
2 kHz
20 kHz
16 kHz
4 kHz