BACK
LIFTING EQUIPMENT
‘‘TANDEM’’ AUTO LIFT
­ Reduce the diameter of a ram compared to DPL­P40 S­
eries. (Approx. 30% cut) This slimer and novel design pro­
vides workers larger spaces.
­ Installation of the two rams at each left and right lift helps
more stable work that resists deviated loads.
­ The new 2­way hydraulic circuit dramatically develops safety.
­ An alarm lamp of oil leak is attached to the remote control
switch. And, the oil leak indicator is placed on the cylin­
der.
DPL­TP30 Series
Model
Capacity
kg
Light Car, Small Passemger Car,
Small Truck
Applicable
Lift
3,000
mm
1,800
Distance between Plungers mm
1,450
right 85mm Ó~2
left 85mm Ó~2
Plunger Diameter
Synchronizing System
Hydraulic
Operation
Remote Control
Motor
3­ph., 2.2kW
Oil Tank Capacity
Lifting Time
Model
L
Approx. 85
Approx. 53sec./50Hz
Approx. 44sec./60Hz
Carridge (Plate Arm)
Installation
DPL­TP30S
Slide Plate
Surface Mounted Type
DPL­TP30SM
Slide Plate
Lay Type
DPL­TP30F
Arm Type
Surface Mounted Type
DPL­TP30FW
Wide Arm
Surface Mounted Type
DPL­TP30ZSM
Slide Plate and Arm
Lay Type
DPL­TP30ZSMF
Slide Plate and Arm
Lay Type
DPL­TP30ZSK
Slide Plate and Arm
Surface Mounted Type
DPL­TP30FMF
Flat Arm
Lay Type
With
Flat Wide Arm
Lay Type
With
Slide Plate and Arm
Lay Type
with
DPL­TP30FMWF
DPL­TP30ZSM­FV
26
Flat Kit (For Under Floor Plate/Arm and Attachment Box
With
‘‘CRIOS’’ AUTO LIFT
Water­Proof Remote Controll Switch (Wired)
Safe Work with Mechanical
Lock
Mechanical Lock is equipped
with a safe nail & rack.
It prevents unexpected des­
cent in case.
Model
Carriage (Plate Arm)
Installation
DPL­302AS
DPL­302AF
DPL­302AMF
DPL­302AZMF
DPL­302AZMF­V
Slide Plate
Arm
Flat Arm
Slide Plate & Arm
Slide Plate & Arm
Surface Mounted Type
Lay type
Not With
With
Flat Kit
Applicable
Light Car.
Small Passenger Car
Plate Dimensions
1,300`2,100(L)~
556(W)~Approx. 50(T)mm
\
Arm Dimensions
\
525`925mm
Light Car. Small Passenger Car. Small Truck
1,300`1,900(L)~550(W)mm 1,300`1,900(L)~468(W)mm
\
600`1,100mm
Capacity
3,000kg
Lift
1,800mm
Distance Between Plungers
1,450mm
2,200mm
Synchronizing/System /Plunger Diameter
Mechanical Lock Type (Rotary Rack & Nail Type)
Motor / Air Pressure
3„ph. 2.2kW / 0.6`0.7Mpa
Lifting Time
Approx. 49sec. (50Hz),
Oil Tank Capacity
Standard Accessories
Option
1,450mm
Hydraulic (Remote Control) /Ó120mm
Safety System
Weight
605`1,070mm
Approx. 41sec. (60Hz)
Approx. 24L
Approx. 1,400kg
Plate Lift Attachment,
Oil 20L
Approx. 1,700kg
Support Rubber for Passenger Car,
Oil 20L
Plate Lift Attachment,
Oil 20L
Wireless Remote Control
27
LIFTING EQUIPMENT
‘‘PASCAL’’ AUTO LIFT (PLATE TYPE)
­ ‘‘PASCAL’’ lift can be lift up and down smoothly.
Because operation method is only use of hydraulic oil for
hydraulic unit.
­ ‘‘PASCAL’’ lift is water­proof type, so it can be used (with
car washer) for car washing.
­ ‘‘PASCAL’’ lift is equipped with no post.
So the lift provides open space around the vehicle.
When the lift is lowered, the floor surface become flat.
Model
Plate Carriage
DPL­30P
Plate Dimensions
Capacity
mm
Fixed Type
Slide Type
L 1,400
W 550
L 1,400„1,750
W
370
3,000
Lift
mm
1,700
Between Plungers
mm
1,350
Ram Dia.
mm
106
Approx. 39sec. (50Hz)
Synchronization
Hydraulic Synchronization
Operating Method
Motor
Electrical Hydraulic
kw
Weight
3„ph
2.2
Plate Lift attachment
(PLA­2, ­3, ­4, ­15)
Option
Hydraulic Pump Unit
DPL­30­S
kg
Lifting Time
DPL­30­S
(Slid Plate Type)
DPL­30P
kg
Approx. 450
Approx. 500
Remote Control Switch
Dimension of DPL­30­S
A: 1700mm
B: 1720mm
B1: 980mm
C: 1400`1750mm
D: 78mm
R: 350~300~20t
28
Z PASCAL LIFT
­ We set the swing arm to the plate, therefore this model can
fit to various type of vehicle. In case of not using the swing
arm, it is stored beside of the plate and the plate surface
becomes flat. It is very useful for pass through use.
­ If install the optional ‘‘Flat Kit’’, in spite of the lift up, the floor
keeps flat. (Flat Kit is operated by air cylinder)
It is useful for oil drain, mission removing, etc.
­ When the lift at the lowest position, the plate and arm is al­
ways flat as the floor.
DPL­40Z
Model
Capacity
kg
Applicable Vehicle
3,000
Light Car to Passenger Car, Light
Truck (Except Long Body Type)
Lift
mm
1,700
Between
Plungers
mm
1,450
On­Floor Plate/Arm
Under Floor Plate/Arm
Saddle
Plate
Dimensions
mm
1,400(L)~500(W)
RAM Dia.
mm
135
Lifting Time
sec.
Approx. 55
Synchronization
Hydraulic Synchronization
Operating Method
Motor
Electrical Hydraulic
kW
3­ph., 2.2
Operation
Remote Control
Standard Accessory
Plate Lift Attachment (PLA­3, ­4, ­15)
Truck Adapter (DPL­FT­OP­H, ­L, ­LS)
Flat Kit (For Under Floor Plate/Arm)
Option
Weight
Plate Lift Attachment (PLA­2)
kg
Approx. 900
Dimensions of DPL­40ZFK
A: 1700mm
B: 1950mm
B1: 950mm
C: 598`1100mm
C1: 1400mm
F: 109`145mm
29
LIFTING EQUIPMENT
SUPER TWIN ACE
­ This lift can use for vehicle washing.
­ This lift have mechanical lock as safety device.
­ Position adjustment of lift height can do accurately by inch­
ing operation of lift­down due to rack­ method of
Model
Applicable
Capacity
Lift
Lifting Time
Post Diameter
Cylinder Diameter
Post Interval
ton
mechanical lock.
­ Lift­down can do smoothly without lift­up.
­ This lift have sensor for water level in pit, so it can confirm of
water level from outside of pit easily.
WSL­PSFU240­B
WSL­PSFU240­T
WSL­PSFU300­B
Large Truck
Bus
Large Truck
24 (12{12)
24 (12{12)
30 (15{15)
mm
sec.
mm
mm
mm
WSL­PSFU300­T
30 (15{15)
1,300
Approx. 100
267
100
Min. 3,000„Max. 9,000
1,300
Approx. 100
267
100
Min. 3,000„Max. 9,000
Safety Device
Operating Method
Operating
Mechanical Locking
Hydraulic Pump Unit~2
Remote Control
Mechanical Locking
Hydraulic Pump Unit~2
Remote Control
Motor
Oil Tank Capacity
3­Ph., 2.2kW~2
Approx. 28Æ~2
3­Ph., 2.2kW~2
Approx. 28Æ~2
PIT LIFT
Model
Capacity
30
PJA­500
PJA­1000
kg
1,500
5,000
10,000
Lift
mm
320
450
450
Saddle Height Min.
mm
100
125
150
Saddle Height Max.
mm
420
575
600
Saddle Side­to­side
Movement
mm
342
375
375
Overall Height
mm
313
965
1,005
Width of Saddle Base
mm
420
470
500
Pit Width
(Adjustable Range)
mm
Air Pressure
PJA­150D
PJA­150D
Weight
750­950
MPa(kgf/cm2)
kg
750­1,000
750­1,000
0.59„1.37 (6„14)
Approx.
85
Approx.
100
Approx.
160
TWO POST PIT LIFT
PJA­1200M
Model
Capacity
Lift
Motor
Lifting Time
Running Speed
Pit Width
ton
mm
m/min.
mm
12
700
3­ph. for Pump 2.2kW for Run 0.1kW
60sec./50Hz 50sec./60Hz
5.4/50Hz, 6.5/60Hz
1,000 (900mm available)
FRONT END AUTO LIFT
­ Position adjustment of lift height can do accurately by inch­
ing operation of lift­down.
­ At the time of load and no­load for lift, lift­down speed is the
same.
So it can do lift­down rapidly.
­ Model TL­PS100A and TL­PS150A have mechanical lock
as safety device.
Model
TL­P40AN
TL­P100AN
TL­PS100A
TL­PS150A
Capacity
Lift
kg
mm
4,000
850
10,000
1,100
10,000
1,000
15,000
1,000
Capacity
kg
4,000
10,000
10,000
15,000
Plunger Diameter
mm
Ó135
Ó165
Post Diameter Ó267
Piston Diameter Ó100
Post Diameter Ó267
Piston Diameter Ó110
Motor
kW
3­ph., 2.2
3­ph., 2.2
3­ph., 2.2
3­ph., 2.2
Remote Control
Electric Hydraulic Pump
Remote Control
Electric Hydraulic Pump
Remote Control
Electric Hydraulic Pump
Remote Control
Electric Hydraulic Pump
Approx. 300
Approx. 440
Approx. 500
Approx. 550
Operating Method
Weight
kg
31
LIFTING EQUIPMENT
WORK STAGE F (FOUR POST LIFT)
This lift has functions as a drive­on type lift as well as a free
wheel type lift.
Having a high lifting height, this lift enables the worker to take
his easy posture during the
operation.
Moreover, the minimum height is low.
This feature makes possible easier entry and exit of a vehicle.
Model
WSF­3500
Capacity
Height
Width~Length
Run Way Width
kg
mm
mm
mm
3,000
2,450
3,110~5,455
560
3,500
2,200
3,350~6,355
610
Run Way Height
mm
Min. 110
Max. 1,810
Min. 110
Max. 1,810
Lift
Lift Height
mm
mm
1,700
„
1,700
3,720
Applicable Wheel
Base
mm
Under 3,200
Under 4,100
Applicable Tread
mm
1,100„1,800
1,100„1,900
Approx.
60sec./50sec.
Approx.
50sec./40sec.
3­ph., 1.5
Approx. 1,200
3­ph., 2.2
Approx. 1,850
Lifting Time
50/60Hz
Motor
Weight
kW
kg
Standard Accessories
Option
WSF­302
WSF­302
Drive­on Board~2, Fix Bar~1
Tire Stopper~2,
Saddle (75mm)~4
Saddle (40mm)~4
Not Good for Car Washing.
PANTOGRAPH TYPE LIFT
This lift has no post. This features makes possible easier lay­
out in a work shop. Also, the work shop can be used more
spaciously.
This single unit of lift is capable of performing lift operations
as a drive­on type as well as a free wheel type.
WSX­N130
Model
Components
Capacity
WSX­N130
WSX­N130­SL
WSX­N131
WSX­N130Z
Main lift, Free wheel lift
(Fixed plate type)
Main lift, Free wheel lift
(Slide plate type)
Main lift
Main lift, Free wheel with arm
(Fixed plate type)
kg
3,000
Lift
mm
Main Lift 1650, Free Wheel Lift 350
Motor
kW
Air Pressure Mpa
32
3„ph
2.2
0.6`0.9
PANTOGRAPH TYPE LIFT
· WSX­40 Specification
Capacity
4,000 (Main Lift/Free­Wheel Lift)
mm
1,600 (Main Lift)
350 (Free­Wheel Lift)
Lift
kg
Applicable
Light Car­Micro Bus
Applicable Wheel Base
mm
Max. 3,950
Motor
kW
3­ph., 2.2
Air Pressure
MPa(kgf/cm2)
0.39„0.97 (4„9.9)
Dimensions (L~W~H)
mm
4,660~2,055~376
Run Way Size
(L~W)
(One Side)
mm
4,520~605
Free­Wheel Lift
(L~W)
Plate Size
mm
1,400„2,100~512
kg
2,255
Weight
Not Good for Car Washing.
WSX­40 (Pit Lift is optional)
EAGLE LIFT (PANTOGRAPH TYPE LIFT)
The lift of this type is equipped with no post.
Hence, the lift provides open space around the vehicle.
Consequently, the door can be opened fully.
When the lift is lowered, the floor surface becomes flat, there­
by offering a roomy space.
Moreover, you can perform washing with the vehicle raised.
Also, the type with a pit depth of 230mm is available, which
features easy installation on a second floor or upper floor.
EGY­F25AW
Model
Hydraulic Unit
Capacity
EGY­F25A­SL
lncluded
ton
2.5
Operating Method
Operating
Lift
mm
Hydraulic Pump
Remote Control
0„1,700
Plate Size
mm
Lifting Time
sec.
Motor
kW
Air Pressure MPa(kgf/cm2)
Safety Device
515~1,426
470~1,390„2,100
Approx. 43
3­ph., 2.2
0.69„0.97 (7„9.9)
Safety Stopper, Stop Valve
Dimensions
(W~L~H)
mm
1,980~1,860~290
1,960~1,955~300
Pit Depth
mm
300
310
kg
870
910
Weight
Not Good for Car Washing.
33
LIFTING EQUIPMENT
EAGLE LIFT II (PANTOGRAPH TYPE LIFT)
­ Easy for drive­on
­ Also possible to install on­floor
­ New developped hydraulic synchronize device can syn­
chronized both plate.
EGY­
25L
Model
Installation
Fix
Hydraulic Unit
EGY­
25LM­SL
ln­Ground
Slide
Fix
Slide
Separated
Capacity
Plate
EGY­
25LM
On­Floor
Plate
ton
2.5
Min. Height
mm
100
105
0
0
Max. Height
mm
1,900
1,905
1,800
1,800
Lift
mm
1,800
1,800
1,800
1,800
Side (W~L) mm
650~1,400
680~1,460
„2,100
650~1,400
680~1,460
„2,100
Motor
kW
Air
Pressure
3­ph., 2­2
MPa
(kgf/cm2)
0.59„0.97 (6„9.9)
Safety Device
Standard
Accessory
EGY­
25L­SL
Safety Stopper, Stop Valve
Drive­On Board
›
›
„
„
On­Floor Connecting
Pipe Cover
›
›
„
„
In­Ground Connecting
Pipe Cover
„
„
›
›
Not Good for Car Washing.
EGY­25L­SL
PANTOGRAPH TYPE LIFT
XL­30TW
Model
Capacity
kg
Operating Method
Lift Min.„Max.
mm
0„1,700
Lifting Time
sec.
Approx. 45
Plate Size
mm
570~1,530
Dimensions (L~W~H)
mm
1,420~2,000~490
Pit Depth
mm
300
kg
798
Weight
Not Good for Car Washing.
34
3,000
Electric Hydraulic Pump
TWO POST LIFT
Model
TP­25TWN2
TP­30TWN2
Max Loading Weight
2,500kg
3,000kg
Stroke
1,800mm
Horsepower
2 HP
AC 220 AC 380
50Hz 60Hz
Voltage
Chain
BL644
Lifting Time
Operation
Control
AC 415
BL846
about 38 sec
Hydraulic
Hand operated
GATE LIFT
Model
GL­30TWN
Max Loading Weight
3,000kg
Stroke
1,800mm
Horsepower
Voltage
Wire
Lifting Time
Operation
Control
3 HP
AC 220 AC 380
50Hz 60Hz
AC 415
1/2Ä
about 38 sec
Hydraulic
Hand operated
35
LIFTING EQUIPMENT
GATE LIFT (TWO POST SURFACE MOUNTED TYPE)
­ It is easy to set the support pads because the arm rotation
are free up to 200mm from the floor. Above 200mm, it will
be automatically locked.
­ The stoppers for unexpected dexcend are locked on during
the work. They can be unlocked by air cylinders.
­ The top beam can be set at the 9 positions according to the
ceiling of the workshop.
GPY­25NA
GPY­30NA
kg
2,500
3,000
Lift
mm
1,700
1,800
Saddle Height
mm
Min. 120
Min. 120
Width~Depth
mm
3,380~1,230
3,674~1,230
Height
mm
2,795`4,005
3,095`4,200
Motor
kW
Model
Capacity
Air Pressure
Mpa
3„ph
1.5
3„ph
0.7`1.0
2.2
0.7`1.0
Z EAGLE LIFT
Model
Pump Unit
Arm Movement
Capacity
ZLY­
30BS2
Built­in
Separate
ZLY­
ZLY­
30ARS2 30BRS2
Built­in
Manual
kg
Applicable Vehicle
Separate
Air
3,000
Light Car, Passenger Car, Rv.1 Box, Light Truck
Lift
mm
1,800
Dimensions
mm
2,600(W)~2,150(D)~490(H)
Plate Size
mm
1,300„1,850~492
Plate
Arm Length
Slide Plate
mm
Safety Device
Electric­hydraulic
Operating Method
Motor
Lifting Time
Remote­control (Wired)
kW
3­ph., 1.5
sec.
Approx. 60
Air Pressure Mpa
Standard Accessory
Option
600„1,100
Mechanical Lock (Air Operated)
Driving
36
ZLY­
30AS2
0.7„1.0
Flat Kit for Arm, Attachment Storage Box,
Plate Lift Attachment, Rubber Pad
Truck Adaptor, Plate Lift Attachment
HYDRAULIC GARAGE JACK
M­220M
M­300M
M­1000M
M­2000M
Model
M­150HL
M­200L
M­220M
M­300M
M­500M
M­1000M
M­2000M
Capacity
ton
1.5
2
2.2
3
5
10
18
Saddle Height
Min.„Max.
mm
95„812
105„605
120„480
130„610
150„560
160„560
190„610
Lift
mm
717
500
360
480
410
400
420
Overall Dimensions
(L~W~H)
mm
Frame Height
mm
170
125
160
190
200
250
260
kg
Approx. 68
Approx. 70
Approx. 50
Approx. 75
Approx. 100
Approx. 150
Approx. 230
Weight
1,010~375~1,205 1,083~286~1,140
685~385~1,263
1,435~250~1,230 1,420~300~1,215 1,560~335~1,290 1,698~370~1,450
Reference
Low Saddle
Low Saddle
„
„
„
„
Short Type
Applicable
Small Truck
Passenger Car
Small Truck
Passenger Car
Small Truck
Passenger Car
Small Truck
Passenger Car
Truck Bus
Truck Bus
Heavy
Vehicle
37
LIFTING EQUIPMENT
AIR­HYDRAULIC GARAGE JACK
You can perform even quick jobs comfortably, simply oper­
ating the air valve.
Furthermore, there is no need for labor assistance for the
worker.
The automatic air pump can carry out everything.
In the case of Models MA­200X, 200LS, 300B,500B and
1000B, it is possible to operate them manually, besides the
air operating method.
MA­200DX
MA­300L
MA­500B
MA­200X
Model
Capacity
ton
Saddle Height Min.„Max. mm
2
95„508
MA­200LS MA­200DX
2
120„620
MA­300B
2
80„500
3
130„610
MA­300L
MA­500B
3
120„600
5
150„560
MA­1000B MA­1500LS
10
160„560
15
175„650
Lift
mm
413
500
420
480
480
410
400
475
Dimensions
Length
Width
Height
mm
mm
mm
870
372
1,265
1,083
398
1,140
1,515
420
1,135
1,468
372
1,208
1,600
470
1,140
1,420
378
1,215
1,560
470
1,440
1,745
505
1,420
Frame Height
mm
160
125
80
190
125
200
250
230
Time Required for
sec.
Lifting Speed (no load)
20
25
30
50
50
55
70
60
Operating Air Pressure MPa
Weight
kg
0.7„1.0
0.8„1.4
0.8„1.4
0.7„1.4
0.8„1.4
0.6„1.4
0.7„1.4
0.7„1.4
Approx. 55
Approx. 72
Approx. 95
Approx. 80
Approx. 130
Approx. 114
Approx. 155
Approx. 340
Air Consumption
Æ
(Air Pressure 0.9MPa)
220
200
460
630
530
670
1,100
1,800
Required Compressor kW
2.2
2.2
2.2
2.2
2.2
2.2
3.7
3.7
Note
Applicable Vehicles
38
„
High Stroke
Low Saddle
Low Saddle
„
Low Saddle
„
Passenger Car Passenger Car Passenger Car Small„Mid. Passenger Car
Truck, Bus
Small Truck
Small Truck
Small Truck
Truck
Small Truck
„
„
Truck, Bus Heavy Vehicle
WRECKER JACK
WJ­150
Model
Capacity
Saddle Height Min.„Max.
kg
mm
1,500
135„495
Overall Height
(Including Handle)
mm
1,807
AIR­HYDRAULIC JACK
For the operation, this jack employs a push valve mechan­
ism.
You can lift even a large­sized motor vehicle, simply pushing
the valve.
AJ­20C
Model
AJ­25L
AJ­40B
AJ­25L
AJ­40B
Capacity
ton
Saddle Height Min.
mm
Saddle Height Max. mm
Lift
mm
Width
mm
Height
mm
Air Pressure
MPa
Weight
kg
20
25
40
205
165
215
430
420
390
120
120
100
326
326
363
1,430
1,430
1,442
0.58„1.37 0.68„1.37 0.58„1.37
46
46
65
Standard Adapter
mm
Ó70~L20 15, 75, 150 Ó100~L30
Optional Adapter
mm
Ó50~L20
Ó50~L60
50~L100
Ó60~L30
Ó60~L70
Ó60~L110
AIR HYDRAULIC PORTABLE JACK
APJ­200
Model
Capacity
Min. Height
Lift
Sub Screw
Max. Height
Air Pressure
Weight
ton
mm
mm
mm
mm
MPa
kg
APJ­250
20
25
210
230
120
120
105
105
435
455
0.68„0.97 0.68„0.97
14
18.5
Adapter 2 Kinds
(Option)
39
LIFTING EQUIPMENT
‘‘GOJAK’’ PORTABLE AUTO CARRIER
5000
6000
kg
kg
562.5
2,250
675
2,700
mm
mm
225
460„810
330
460„890
kg
13.6
17.2
Model
Capacity
Per Wheel
Total for 4 Wheels
Applicable Tire
Tire Width
Tire Outer Diameter
Weight
­ One set of two pcs.
PORTABLE HYDRAULIC JACK
· Gauge Type
Model
Capacity
ton
Height
Min.„Max.
mm
Weight
kg
MH­10P
MH­15P
MH­20P
10
15
20
240„470
265„510
270„430
10.5
14.5
15.9
MHC­2RS
Side Hook 2
Top 5
Side Hook
16„129
12
MHC­5RS
Side Hook 5
Top 10
Side Hook
22„142
20
MHC­10RS
Side Hook 10
Top 20
Side Hook
28„173
34
· Fork Type
MH­10P
MHC­2RS
40
PORTABLE HYDRAULIC JACK
MMJ
MS­2
MH­10
MH­50L
MHL­20
· Standard Type
Model
MS­2
MS­3
MN­4
MH­5
MH­7
MH­10
MH­15
MH­20
MH­30Y
MH­50Y
MH­100Y
Capacity
ton
Min. Height
mm
Lift
mm
Auxiliary
Screw Lift
mm
Max.
Height
mm
Base
Dimension
mm
Handle
Dimension
mm
2
3
4
5
7
10
15
20
30
50
100
180
190
190
200
200
240
265
270
280
305
305
115
115
115
120
120
150
165
160
160
170
145
50
60
70
70
70
80
80
„
„
„
„
345
365
375
390
390
470
510
430
440
475
450
110~ 65
72~115
131~ 76
142~ 82
151~ 90
166~106
180~118
182~128
192~142
237~188
318~265
19Ó~ 440
19Ó~ 440
22Ó~ 490
22Ó~ 490
22Ó~ 600
22Ó~ 600
22Ó~ 600
27Ó~ 730
27Ó~ 800
27Ó~1,000
27Ó~1,000
2.4
2.7
4.0
4.6
5.5
7.9
10.4
12.1
18.5
37.0
93.0
10
15
20
30
170
170
180
180
95
90
85
80
75
70
40
„
340
330
305
260
166~106
180~118
182~128
192~142
22Ó~
22Ó~
27Ó~
27Ó~
600
600
730
800
6.4
8.0
10.1
14.0
5
10
20
50
58
120
130
140
20
30
30
30
„
„
„
„
78
150
160
170
74Ó
108Ó
120Ó
178Ó
13.8Ó~
18Ó~
20Ó~
22Ó~
240
440
680
750
2.0
5.4
8.4
19.2
5
10
20
225
300
310
120
165
160
70
80
„
415
545
470
151~ 90
180~118
182~128
22Ó~ 545
22Ó~ 680
28Ó~ 800
6.2
12.5
15.2
2
20
550
685
480
490
„
„
1,030
1,175
134~ 77
240~145
22Ó~ 490
28Ó~ 800
8.7
51.7
10
160
100
„
(Double)
260
180~118
22Ó~ 600
7.7
Weight
kg
· Air Suspension Type
MHB­10
MHB­15
MHB­20
MHB­30Y
· Mini Type
MMJ­5C
MMJ­10
MMJ­20
MMJ­50Y
· Lock Type
MH­5LS
MH­10LS
MH­20L
· Long Type
MHL­2
MHL­20
· For Folklift
HFD­10F
41
LIFTING EQUIPMENT
PORTABLE SCREW JACK
Model
Capacity
Mini. Height
Max. Height
Auxiliary Screw Lift
Handle Length
Weight
HS­2DN
ton
mm
mm
mm
mm
kg
HS­2DN
AHS­2N
2
162
327
63
650
3.5
2
150
318
„
650
3.8
AHS­2N
SCISSORS JACK
P­10
Model
Capacity
Min. Height
Max. Height
Handle Length
Weight
kg
mm
mm
mm
kg
800
100
390
630
2.8
FLAME LIFT
Model
Capacity
kg
Saddle Height
Lift
mm
mm
Arm Length
mm
FLX­3500L
42
FL­8000L
FL­14000
3,500
6,500
14,000
410„1,480 410„1,480 410„1,480
870
870
870
510
610
610
FLX­3500L FLX­8000L FLX­14000
Model
Capacity
FL­5000L
kg
3,500
7,000
12,000
Saddle Height
Lift
mm
mm
160„930
770
215„980
740
340„1,300
760
Arm Length
mm
1,500
1,924
1,750
VERTICAL LIFT
VALY­10A
Model
Capacity
Saddle Height Min.„Max.
Lift
L~W~H
Frame Width~Overall Width
Height
Weight
Lifting Time
Air Pressure
ton
mm
mm
mm
mm
mm
kg
sec.
kgf/cm2
10
180„705
520
1,650~790~1,305
530~660
300
355
105 (unloaded)
7„14
‘‘MOVING RACK’’ LIFTING JACK
MRM­50N
MRM­100L
Model
Capacity
Min. Height„Max. Height
Width~Length
Working Pressure
Weight
kg
mm
mm
MPa
kg
MRM­50N
MRM­100L
MRM­150L
5,000
203„683
520~2,085
0.8„1.4
Approx. 200
10,000
300„900
700~2,460
0.8„1.4
Approx. 428
15,000
303„903
770~2,490
0.96„1.4
Approx. 525
DIFF­JACK
DJ­50
Model
Capacity
Saddle Height
Lift
Dimensions (L~W~H)
Operating Method
kg
mm
mm
mm
Adjustment of
Supporting Plate
Differential Fit­up
Weight
500
Min.„Max. 140„600
460
1,070~610~370
Manual Hydraulic
By Screw Turning
kg
By Chuck
Approx. 50
Standard Accessory: Attachment for Differential of 2­axle car.
43
LIFTING EQUIPMENT
TRANSMISSION JACK
HUJ­800B
HUJ­1500B
kg
mm
800
610
1,500
710
mm
mm
195
805
160
870
Model
Capacity
Lift
Saddle Height
Min.
Max.
Saddle Inclination
Degree
HUJ­800B
Length
Width
Height
Weight
60‹ Forward 30‹ Forward
10‹ Backward 15‹ Backward
mm
mm
mm
kg
865
430
330
60
1,130
650
290
135
HMJ­450TWS
HMJ­1000B
TRANSMISSION JACK (HIGH LIFT TYPE)
Model
Capacity
Min. Height
Max. Height
kg
mm
mm
450
Base Plate 830
Base Plate 1,743
1,000
Saddle 785
Saddle1,535
Lift
mm
913
750
Hydraulic Pedal
Air­Hydraulic
„
0.49„1.37
(5„14)
Operating Method
Operating Air
Pressure
MPa
(kgf/cm2)
30‹
15‹
15‹
15‹
Base Plate
Tilting Angle
Dimensions
Weight
HMJ­450TWS
HMJ­1000B
44
Forward
Backwar
Left
Right
10‹
10‹
10‹
10‹
Forward
Backward
Left
Right
mm
(W) 904
(H)535
~(L)655
kg
60
190
2 step cylinder
UNIVERSAL ENGINE LIFTER
Model
UEL­500N
Capacity
kg
Saddle Height Min.„Max.
mm
Lift
mm
Saddle Size
mm
Operating Method
Air Pressure
MPa(kgf/cm2)
Weight
kg
500
700„1,700
1,000
800~1,130
Air­Hydraulic & Pedal
0.59„0.97 (6.0„9.9)
210
Turn Backle Chain
(2sets)
Standard Accessories
ENGINE SUPPORT BRIDGE
ESB­2
Model
Capacity
Bridge Length
Foot Length
kg
mm
mm
200
1,381
276
SUPPORT STAND
SS­300
Model
Capacity
Saddle Height Min.„Max.
Weight
kg
mm
kg
300
1,353„2,100
Approx. 14
NOTE:
­ When leave from vehicle, use of this support
stand to avoid lift lowering.
­ Be sure never lift operate when using this
support stand.
45
LIFTING EQUIPMENT
ENGINE SERVICE JACK
EJ­15­3
Model
Capacity
Min. Height
Lift
Max. Height
Length~Width
Inclination Degree
Weight
kg
mm
mm
mm
mm
kg
1,500
345
200
545
1,800~825
15‹ for all sides
Approx. 210
RIGID RACK
M­12B­5
Model
Capacity
Min. Height
Max. Height
Weight (per 1pc.)
No. of Legs
Leg Rubber Cover
Saddle Rubber Pad
ton
mm
mm
kg
M­12R­5
J­60S
M­12B­5
M­12R­5
M­15­5
M­15LB­5
M­30C­5
M­50C­5
J­60S
1.5{1.5
374
480
3.3
3
1.5{1.5
400
507
3.4
3
2.5{2.5
345
545
4.5
3
2.5{2.5
470
770
6.8
3
3{3
350
550
5.4
3
5{5
350
550
6.6
3
6{6
394
634
10
4
›
„
›
›
„
„
›
„
„
„
„
„
„
2pcs./set
46
AUTO JACK STAND
JS­600N
Model
Capacity
Min. Height
Lift
Frame Dimensions
Air Pressure
Weight
ton
mm
mm
mm
MPa(kgf/cm2)
kg
6{6
580, 630, 680
350
650~650
0.59„1.37 (6.0„14)
70 (per 1pc.)
Attachment A, B
Saddle A, B
Standard Accessories
2pcs./set
AIR­HYDRAULIC PRESS
HPA­50
HPA­100
Manual Type and
Air Pump
Manual Type and
Air Pump
6„9.9
6„9.9
Capacity
ton
Ram Stroke
mm
Auxiliary Screw Stroke
Overall Height
mm
Weight
kg
35
140
100
1,705
Approx. 310
60
140
100
2,040
Approx. 690
Standard Accessories
V Block 2pcs.
V Block 2pcs.
HP­10C
HP­30MD
Manual Type
Manual Type
5
150
80
1,320
Approx. 80
15
155
120
1,600
Approx. 150
V Block 2pcs.
V Block 2pcs.
Model
Operating Method
Air Pressure
kgf/cm2
HPA­50
HYDRAULIC PRESS
Model
Operation Method
Capacity
ton
Ram Stroke
mm
Auxiliary Screw Stroke
Overall Height
mm
Weight
kg
Standard Accessories
HP­30MD
47
LIFTING EQUIPMENT
HYDRAULIC PRESS (ELECTRIC DRIVEN)
HP­200E
Model
Capacity
ton
Ram Stroke
mm
Overall Height
mm
Weight
HPE­100­3
100
220
250
1,800
kg
800
1,020
Electric Motor
kW
3­ph., 2.2
3­ph., 4
Hydraulic Tank
%
100
12
Electric motor briven (3­ph., 2.2kW) hydraulic pump equipped. Oil
tank capacity 100­liters (oil not supplied).
Hydraulic operation for adjusting height of press­bed. Please
specify voltage and cycles when ordering.
ENGINE SADDLE
KES­40
Model
Capacity
Dimensions (L~W~H)
Weight
kg
mm
kg
Max. 400
600~500~412
30
HYDRAULIC OIL
Model
Contents
Æ
HO­2
HO­18
2
18
SUB WRECKER
SR­300N
Model
Capacity
Dimensions (L~W)
Tire Size
kg
mm
350/unit
790~525
300­4­4P04 wheels (per unit)
2units/set
48
TOWING WIRE­ROPE
Model
PR­23AN
PR­23BN
PR­24N
PR­25N
Use
Length
Hook
Passenger Car
Passenger Car
Truck
Diesel Car ­ Bus
12Ómm~5m
12Ómm~5m
16Ómm~5m
18Ómm~5m
Without
With
With
With
TOWING AMBULANCE
GLX­7­A
Model
Light Vehicle­Passenger Car 2,800cc
Max. Truck 2.75ton
Capacity
Length~Width mm
Tire Size
Weight
kg
2,775~860
BS4.00„8„6PR
187
CHECK MIRROR
· Garage Mirror
Acrylic
Mirror Size
Check Mirror
Stainless
Square Type
Fixed
Movable
Wall Hanging
Sq. 500~600mm
Sq. 600~800mm
GMA­5060S­P1S
GMA­6080S­P1S
GMA­5060S­P2S
GMA­6080S­P2S
GMA­5060S­WA­2
GMA­6080S­WA­2
Cir. 300Ó
Cir. 450Ó
GMA­300S­P1S
GMA­450S­P1S
GMA­300S­P2S
GMA­450S­P2S
GMA­300S­WA­1
GMA­450S­WA­1
Cir. 600Ó
Cir. 800Ó
GMA­600S­P2
GMA­800S­P2
Sq. 230~320mm
Sq. 450~600mm
Sq. 600~800mm
GMS­2332S­P1S
GMS­4560S­P1S
GMS­6080S­P2
GMS­2332S­P2S
GMS­4560S­P2S
GMS­2332S­WA­1
GMS­4560S­WA­1
GMS­6080S­WA­2
Cir. 300Ó
Cir. 450Ó
Cir. 600Ó
Cir. 800Ó
GMS­300S­P1S
GMS­450S­P1S
GMS­600S­P2
GMS­800S­P2
GMS­300S­P2S
GMS­450S­P2S
GMS­300S­WA­1
GMS­450S­WA­1
GMS­600S­WA­2
GMS­800S­WA­2
GMA­600S­WA­2
GMA­800S­WA­2
· Check Mirror
Circle Type
GM­1S
Fix Pole
GM­2S
Movable Pole
Mirror Size
Mirror Only
With Fix Pole
Sq. 400~1,200mm
Sq. 600~1,500mm
TM­1
TM­2
TM­1­P2
TM­2­P2
sq.: Square Type
Cir.: Circle Type
49
qMEMOr