™
Premium Quality
Industrial Strength
Shock Cord and Accessories
Solcor Premium Quality Fittings
Part Number Description
Code SCAV
Part Number Description
Multistop Lateral Valve System
Code SCAH
For use as an irrigation flushing valve.
Code SW9
Code SCLV/25 Flushing Valve
For 25mm - 35mm lateral.
Code SCAC
Code
Ezy Adjusta Cord ©
SCAB6/60
SCAB6/100
SCAB8/60
SCAB8/100
6mm x 600 mm (1/4” x 24”)
6mm x 1 metre (1/4” x 39”)
8mm x 600 mm (5/16” x 24”)
8mm x 1 metre (5/16” x 39”)
Code SCNCL
Connector
Useful to create various cord formations:
- running loop
- circles
- joining two lengths.
Code SCAE
Adjustable Extender
Code SCAA
Adjustable Anchor
Code SCAT
Tarp Hook
Code SCAJ
J Hook
Code SCADH
High specification solid rubber core shock cord has a UV resistant
polyester cover and is impervious to ozone, salt water and salt air,
petroleum products and most caustic chemicals (including chlorine).
For adjusting cord and rope up to 10 mm.
Can be used to anchor ties to the
required length.
Insert into Tarpaulin eyelets for
convenient securing.
Versatile - will fit cord/rope up to 10 mm.
Double Barrel Hook
Versatile - will fit cord/rope up to 10 mm.
Solcor Rubber Glue
Part Number Description
Part Number Description
Solid Core Shock Cord
©
SCG
Solcor Rubber Glue
Spool - Colour black
This is a EPDM adhesive
4 mm (5/32”) x 100 metres (328ft.)
6 mm (1/4”) x 100 metres (328ft.)
8 mm (5/16”) x 100 metres (328ft.)
- Adheres EPDM foam and solid rubber
to most surfaces.
- Long tack - allows long positioning time.
- Can be used on many different materials
as a general purpose adhesive, such
as plywood, concrete, metals etc.
- Good heat and water resistance.
- Elastic and flexible.
- Cannot be used on solvent sensitive
plastics such as polystyrene.
©
Solid Core Shock Cord incorporating
4 Strands of Stainless Steel Wire
Loring Distributors
Heat shrink Whipping ends
onto the ends of cut cord or rope to
prevent fraying.
Closure Clips
Versatile - has many uses in the
field and in the home.
Currently available in 6mm
& 8mm sizes
SCWW8-50
SCWW8-100
Whipping Ends
Fully adjustable Shock Cord.
No Fraying - Try the unique
shock cord with injection
moulded sleeves to prevent
fraying. Doesn’t deteriorate
when exposed to the
elements.
SCBB4-100
SCBB6-100
SCBB8-100
Hook
With the point of effort in the centre of
the hook.
Spool - Colour white with red fleck
8 mm (5/16”) x 50 metres (164ft.)
8 mm (5/16”) x 100 metres (328ft.)
P.O. Box 518, Blenheim, New Zealand
Phone 0064 3 579 5772 ~ Fax 0064 3 579 5773
Mobile 021 420 850 ~ Email [email protected]
www.solcor.com
www.solcor-irrigation.com
Solcor Australia Pty Ltd
P.O. Box 2017, Normanhurst, NSW 2076, Australia
Phone 0061 2 9482 7821 ~ Fax 0061 2 9482 7538
Mobile 0411 211 902 ~ Email [email protected]
SOLCOR Premium Quality Fittings
© Copyright
2008 Loring Industries Ltd
SOLCOR fittings and accessories are manufactured from UV resistant 6/6 nylon for durability
Adjustable Extender
SCAE
E
Joins shock cord and creates
fixed and running loops
Adjustable Anchor
SCAA
J Hook
SCAJ
2
Attaching your Solcor Adjustable Extender and J Hook
3
1 - Slide fitting over whip end and Solcor cord to the desired position.
2 - Sharply tug free end at right angles down into tapered slot. The Solcor cord
is now fixed firmly to length.
3 - To move fitting to a new position, simply straighten the cord and pull out of slot.
Reposition fitting and jam the Solcor cord again.
Tarp Hook
SCAT
B
Adjustable Hook
SCAH
F
Allows quick & easy
cord adjustment
C
Whipping Ends
SW9
Slide Whipping End over end of
cord/rope
Ensure 4-5mm overhang when
applying heat
1
Secures objects with
eyelets eg: tarpaulins
Ezy Adjusta Cord
SCAB
©
Hook
Locking your Adjustable Hook
Step One.
Thread the cord through the Connector.
Step Two.
Pull up a loop through the slot in the top.
Step Three.
Insert The Jamming Block and pull the
cord while pressing down with your thumb.
The cord is now set.
Easily fastens shock cord
to a fixed point
Insert block
3 This way up
Staple
2
1
Cord with injection
moulded sleeve
Staple is
inserted
into slot to
securely attach
cord to hook
Cord with
injection
moulded sleeve
inserted into
the hook end
Solcor Adjusta
Cord assembled
with staple in
place. This
securely attaches
the hook to the
Solcor locking
clip
Solcor injection
moulded sleeves
Helps minimise the fraying of
Shock Cord and nylon ropes
Apply a heat source.
A heat gun is recommended.
Solcor Whipping - 9.5mm dia.
Shrink ratio - 2 : 1 (9.5mm:4.75mm)
Shrink Temperature - 90ºc
Sleeve
will shrink
Save on inventory costs - Solcor’s Ezy Adjusta Cord can be adjusted
to any length between 10 - 90cm, with Solcor’s locking clip to keep
the excess cord secured away.
Hooks are manufactured from 6/nylon with a glass reinforced nylon
additive for UV protection and additional strength, making it resistant
to regular abrasion. Ideal when exposed to the elements.
Solcor’s Ezy Adjusta Cord ends WON’T SCRATCH, WON’T RUST and
WON’T BEND!
Solcor Packaging
D
Connector
SCAC
Joins shock cord and creates
fixed and running loops
Ezy Adjusta Cord ©
Solcor
Accessories
Fully adjustable Shock Cord.
Using your Permanent Connector
Creating a fixed loop Thread the cord right through fitting,
until enough is available to make
desired loop. Insert end in
adjacent tube and fix in place
with the Jamming Block.
Insert block with
groove facing
upwards
Push down
with thumb
To make Running Loop or
Noose Fix only the end and leave out the Jamming Block on the return.
The loop is now free to run.
Joining Two SOLCOR Cords Thread the cord through the connector. Pull up a loop through the slot in the top.
Insert the Jamming Block and pull the cord while pressing down with your thumb.
The cord is now set.
SCAB6/60
SCAB6/100
SCAB8/60
SCAB8/100
6mm x 600 mm
6mm x 1 metre
8mm x 600 mm
8mm x 1 metre
SCAA2
SCAC2
SCAH2
SCADH2
SCAE2
SCAJ2
SCAT2
SW9
Adjustable Anchor x2
Adjustable Connector x 2
Adjustable Hook x 2
Adjustable Double Hook x 2
Adjustable Extender x 2
Adjustable J-Hook x 2
Tarp Hook x 2
Whipping Ends x 16