Sodablasters

Sodablasters
Clean or remove without damaging
Sodablasting is a fast and gentle method of removing paint
& corrosion - even from hard to reach places. Sodablasting
neither warms up, nor stretches the sheet metal. Sodablasting
does not damage glass, rubber or plastic and due to this fact,
Sodablasting requires a minimal need for shielding.
Sodablasting protects the bare metal from rusting right away
in contrast to sandblasting. Sodablasting removes anti-fouling
paint from boat hulls without damaging the boat. Sodablasting
removes varnish & doesn’t damage seals (rubber or plastic).
Sodablasting cleans paint off glass surfaces or window frames
without damaging the glass or rubber seals. Sodablasting
removes varnish from wooden furniture. Sodablasting is gentle
& environment friendly.
145150-000
JWL Sodablasting Gun & JWL Sodablaster XL are powerful tools
with practical, refillable containers (1,2 L and 25 L).
JWL Sodablasting Gun is suitable for both hobby and
professional use!
The JWL Sodablaster XL is designed for larger tasks and it is
equipped with a 25 L container, with an integrated hand truck
and pressure regulator and water separator.
Always use P2 respiratory protection, hearing protection and
eye- and facemask when blasting with soda. Blasting soda is
pure NaHCO3, i.e. normal baking soda. It is not dangerous, but
may be harmful if inhaled as dust.
NB the Sodablasting Gun requires a a compressor with a
capacity of at least 2.5 HP / 180 l/min. The Sodablaster XL
requires 7.5 / 600 l/min. Make sure to use soda especially
intended for blasting to acheive the desired result
Technical Specifications:
Working pressure
Air consumption (145150)
Air consumption (145160)
Container (145150)
Container (145160)
Thread
6-12 bar (87 -174 psi)
Min. 180 L. air/min at 8 bar
Min. 600 L. air/min at 8 bar
1,2 Litre
25 Litre
1/4” internal BSP/NPT
Materials:
Handle and trigger
Valve
Gaskets / O-rings
Spring
Containers
Acetal plastic
Acetal plastic
Nitrile
Hard. steel, el.galv.
PEHD
145160-000
JWL Sodablasters
Code. No.
JWL Sodablasting Gun with 1,2 Litre container
145150-000
JWL Sodablaster XL with 25 Litre container
145160-000
NB requires a compressor with a capacity of at least 2.5 HP / 180 l/min
NB requires a professional compressor with a capacity of at least 7.5 HP / 600 l/min
Accessories
Code. No.
Soda (NaHCO3) specifically intended for blasting 5 L
320103-000
Soda (NaHCO3) specifically intended for blasting 25 kg
320101-000
Protection mask
145108
Container 1.2 Litre
143200
30
31