EC Quality of production by means of monitoring
No. CE
CE51699
51699
The certificate is granted to:
WRP Asia Pacific SDN BHD
Lot 1, Jalan 3, Kawasan Perusahaan
Bandar Baru
Salak Tinggi
Sepang
Selangor
43900
Malaysia
In respect of:
For the manufacture of gloves to the standards specified on the continuation sheet
On the basis of our examination, under the requirements of Council Directive 89/686/EEC "Personal Protective
Equipment" Article 11B, system for ensuring EC quality of production by means of monitoring.
For and on behalf of BSI, a Notified Body for the above Directive (Notified Body Number 0086):
Gary Fenton, Global Assurance Director
First issued: 19/01/2001
Latest Issue: 17/10/2012
First issued: 19/01/2001
Latest Issue: 17/10/2012
Page
Page1 of
1 2of 2
This certificate remains the property of The British Standards Institution and shall be returned immediately upon request. To check its validity telephone +44 (0)845 080 9000
Information and contact: BSI, Kitemark Court, Davy Avenue, Knowlhill, Milton Keynes MK5 8PP. Tel: +44 845 080 9000. BSI Assurance UK Limited, registered in
England under number 7805321, at 389 Chiswick High Road, London, W4 4AL, UK. A member of the BSI Group of Companies.
EC Quality of production by means of monitoring
No. CE 51699
Product Specification
The gloves covered by the scope of this article 11B certificate conform to the following standards:
Standard
Product Type
EN 374-2:2003
Protective gloves against chemicals and micro-organisms – Determination of
resistance to penetration
EN 374-3:2003
Protective gloves against chemicals and micro-organisms - Determination of
resistance to permeation by chemicals
EN 388:2003
Protective gloves against mechanical risks
EN 420:2003+A1:2009
General requirements for gloves
EN 421:2010
Protective gloves against ionizing radiation & radioactive contamination
EN 374-3:2003
Protective gloves against chemicals and micro-organisms - Determination of
resistance to permeation by chemicals
(Alternative chemicals not listed in EN 374-1:2003 tested in this method)
- Last Item -
Certificate Amendment Record
Issue Date
Comments
BSI Report
number
-
Jan 2001
First issue
May 2008
Addition of 2003 versions of EN 374-2&3, 420 and 388
0086:08:7216411
Oct 2012
Removal to 1994 versions of EN 388, EN 374 and EN 420 and
addition of EN 420:2003+A1:2009 and EN 421:2010
0086:12:7904512
Note: The Certificate holder is responsible for keeping the Notified Body advised of changes to any
aspect of the overall process used in the manufacture of the product.
First issued: 19/01/2001
Latest Issue: 17/10/2012
Page 2 of 2
This certificate remains the property of The British Standards Institution and shall be returned immediately upon request. To check its validity telephone +44 (0)845 080 9000
Information and contact: BSI, Kitemark Court, Davy Avenue, Knowlhill, Milton Keynes MK5 8PP. Tel: +44 845 080 9000. BSI Assurance UK Limited, registered in
England under number 7805321, at 389 Chiswick High Road, London, W4 4AL, UK. A member of the BSI Group of Companies.