2.271 Monthly ASCII Layout
New
Field
Number
Name
Starting
Length
Position
(Density Codes = "J" & "N")
Description
Justified
Call Service Type: This field contains one of the following call service code:
1
2
3
Call Service Type
component_group_cd
component_grp_val
1
3
5
2
2
24
1 = Dial One (including non-equal access Dial One)
2 = Dedicated Access
3 = Travel Card
4 = 8XX Switch Service
5 = 8XX Dedicated Access
6 = Home 8XX
8 = PIN 8XX
12 = New Service
13 = World Card
Component Group Code: This field contains one of the following groups of
service elements:
AC = Authcode
AN = ANI (Originating number)
BC = Business Card (Calling Card business customers)
DL = Dedicated Line
HM = Home 8XX Number
IW = Inbound Watts (8XX-XXX-XXXX)
RD = Ring to level billing for Dedicated 8XX
RT = Ring to level billing for Switched 8XX
WP = World Card Plus (Calling Cards for consumer customers)
Note: This field is used in combination with the component group value field.
Component Group Value: This field contains and identifies individual service
elements associated with component group code. For example, ANI for
component group code AN, Business Card Number for component group code
BC, etc.
Space filled and Left
Justified.
Space filled and Left
Justified.
Space filled and Left
Justified.
Note: This field is used in combination with the component group code field.
4
product_acct_id
29
12
Product Account Id: This field contains the Qwest numeric product account id.
5
Customer Number
41
10
Customer Account number: This field contains the Qwest internal account
number, example (56592210).
ASCII Monthly Layout
1
Zero filled and Right
Justified.
Zero filled and Right
Justified
12/2/2013 3:06 PM
2.271 Monthly ASCII Layout
New
Field
Number
Name
Starting
Length
Position
6
orig_dt
51
8
7
discn_dt
59
8
8
orig_time
67
6
9
discn_time
73
6
10
Call Duration Minutes
79
5
11
Call Duration Seconds
84
2
12
dialedno
86
15
13
calledno
101
15
14
ani
116
15
ASCII Monthly Layout
(Density Codes = "J" & "N")
Description
Originating date: The field contains the originating date of the call, format
yyyymmdd, example (20030221).
Disconnect date: The field contains the disconnect date of the call, format
yyyymmdd, example (20030221).
Origination Time: This field contains the originating time of the call, format
hhmmss, (hours, minutes, secs), example (082145).
Disconnect Time: This field contains the disconnect time of the call, format
hhmmss, (hours, minutes, secs), example (092552).
Call Duration Minutes: This field contains the length of the call in full minutes.
Justified
Zero filled and Right
Justified.
Zero filled and Right
Justified.
Zero filled and Right
Justified.
Zero filled and Right
Justified.
Zero filled and Right
Justified
Call Duration Seconds: This field contains the remaining seconds from the "Call
Zero filled and Right
Duration Minutes" field.
Justified
Note: contents of this field will not exceed a value of "59".
Space filled and Left
Dialed Number: This field contains the number entered by the originating party.
Justified.
Called Number: This field contains the physical terminating point for the
Space filled and Left
connection (ring to number for 800). This is the number called translated by the
Justified.
switch.
Automatic Number Identification: This field contains the number from where
the call originates, if available from the switch.
Space filled and Left
Justified.
Note: Used to determine call origination and to determine pricing NPA/NXX.
2
12/2/2013 3:06 PM
2.271 Monthly ASCII Layout
New
Field
Number
Name
Starting
Length
Position
(Density Codes = "J" & "N")
Description
Justified
Answer Type: This field contains the type of answer detected. Call processing
stores one of the following values:
15
anstype
131
6
0 = Nil value (For example, caller abandon during origination.)
1 = Software answer, no voice detected.
2 = Software answer, voice detected.
3 = Software answer, audio ringback detected.
4 = Hardware answer.
5 = Software answer, silence detected.
6 = Software answer, persistent ringing.
7 = Audio tone detector (ATD) hardware error or forced disconnect and
continuous tone at remote switch answer.
8 = Software answer, busy tone detected.
9 = Software answer, reorder tone detected.
10 = IMT software answer (billable, converted to a code of 2).
11 = IMT hardware answer (billable, converted to a code of 4).
12 = Early billing active with no answer.
13 = Early billing active with answer.
14–15 = Not used.
Note: Most common values are: 1, 2, 4, 10 and 11.
Personal Identification Number Digits: This field contains personal
identification number digits unique to each subscriber.
16
pindigs
137
4
17
infodig
141
2
18
Surcharge
143
1
ASCII Monthly Layout
Note: This field is an optional level of screening beyond authorization code and
automatic number identification and is available for Calling Cards Only.
Information Digits: This field contains the two digit codes which precede the
destination number which informs Qwest about the type of line that originated the
call, any special characteristics of the billing number, or certain service classes.
Example: Payphone, operator service etc.
Surcharge field: This field contains one of the following surcharge indicators
when applicable:
P = Payphone surcharge applies.
O = Operator surcharge applies, (Card Calls only).
B = Both Payphone and Operator surcharges apply.
3
Zero filled and Right
Justified.
Space filled and Left
Justified.
Space filled and Left
Justified.
Space filled
12/2/2013 3:06 PM
2.271 Monthly ASCII Layout
New
Field
Number
Name
Starting
Length
Position
(Density Codes = "J" & "N")
Description
Justified
Completion Code: This field contains the call completion code, which describes
the reason for call termination.
19
compcode
144
6
0 = Normal completed call
1 = Treated call
2 = Abandoned call
3 = Abnormal call
4 = Signaling system error
5 = Forced disconnect invoked
6 = Off-net route advance invoked
7 = Test call
8 = Recorded promotion
9 = TCAP DCP response time-out
10 = Not used
11 = Not used
12 = Abnormal release call
13 = Completed answer CDR
14 = Not used
15 = COS failure
Zero filled and Right
Justified.
Note: Calls with a completion code of 0, 1, 5, 6 and 12 are marked as billable.
Prefix Digit: This field contains the three bit converted to ASCII character from
UCS015 that defines the dialed (or called) number’s prefix digits.
What type of call was placed:
20
predig
ASCII Monthly Layout
150
1
0=
1=
2=
3=
4=
1 prefix (domestic 1+call)
0 prefix (domestic operator service)
01 prefix (international operator service)
011 prefix (international 1 + call)
1 prefix (domestic 1+call)
4
Space filled
12/2/2013 3:06 PM
2.271 Monthly ASCII Layout
New
Field
Number
21
Name
trtmtcd
Starting
Length
Position
151
6
22
orig_trunk_group_name
157
12
23
origmem
169
6
24
term_trunk_group_name
175
12
25
termmem
187
6
(Density Codes = "J" & "N")
Description
Justified
Treatment Code: This field contains the call treatment code associated with the
call. The treatment may result from events detected within the switch, or may arise
from cause values contained within signaling messages received by a trunk agency.
Software converts cause values to treatment values before it stores them in this
Zero filled and Right
field.
Justified.
000 = UNDT UNDEFINED_TRTMT (billable)
019 = BUSY BUSY_LINE (billable)
093 = NOSR NO_SOFTWARE_RESOURCE (billable)
Originating Trunk Group Name: This field contains the trunk group name of the
trunk the call originated from. The originating trunk group name is retrieved from
the Qwest "TRUNK_GROUP" table.
Originating Trunk Group Member: This field contains the originating trunk
group member where the call originated.
Terminating Trunk Group Name: This field contains the trunk group name of
the trunk the call terminated to. The terminating trunk group name is retrieved
from the Qwest "TRUNK_GROUP" table.
Terminating Trunk Group Member: This field contains the terminating trunk
group member where the call terminated.
Space filled and Left
Justified.
Zero filled and Right
Justified.
Space filled and Left
Justified.
Zero filled and Right
Justified.
Intra LATA Indicator: This field contains one of the following LATA indicators:
26
intra_lata_ind
193
1
Space filled
0 = Inter LATA
1 = Intra LATA
Call Area: This field contains one of the following call area indicators:
27
Call Area
194
1
1 = Intrastate
2 = Interstate
3 = International
4 = Other (i.e., Directory Assistance)
Space filled
City Calling: This field contains the name of the city the call originated from.
28
City Calling
ASCII Monthly Layout
195
10
Note #1: For domestic calls, this field is populated with calling city name.
Note #2: For international calls, this field is populated with calling country name.
5
Space filled and Left
Justified
12/2/2013 3:06 PM
2.271 Monthly ASCII Layout
New
Field
Number
29
Name
State Calling
Starting
Length
Position
205
2
(Density Codes = "J" & "N")
Description
State Calling: This field contains the two character U.S. State code that the call
originated from, example (CA, OH, NY, etc).
Justified
Space filled and
Right Justified
Note: For international calls, this field will contain the following value: "IT".
City Called: This field contains the name of the city the call terminated to.
30
31
City Called
State Called
207
217
10
2
Note #1: For domestic calls, this field is populated with called city name.
Note #2: For international calls, this field is populated with called country name.
State Called: This field contains the two character U.S. State code that the call
terminated to, example (CA, OH, NY, etc).
Space filled and Left
Justified
Space filled and
Right Justified
Note: For international calls, this field will contain the following value: "IT"
Rate Period: This field contains one of the following rate period values for both
domestic and international calls:
32
Rate Period
219
1
33
Terminating Country
Code
220
4
Originating Country
Code
224
35
PAC Codes
228
12
36
orig_pricing_npa
240
3
37
orig_pricing_nxx
243
3
34
ASCII Monthly Layout
Domestic
International
1 = Day
1 = Standard
2 = Evening
2 = Economy
3 = Night
3 = Discount
Terminating Country Code: This field contains the IDDD Country Code
number, for Terminating International calls only.
Note: If call Originates International and Terminates U.S. or CAN, field will be
blank.
Originating Country Code: This field contains the IDDD Country Code number,
for Originating International calls only.
4
Note: If call Originates U.S. or CAN and Terminates International, field will be
blank.
PAC Codes: This field contains PAC Codes.
Originating Pricing NPA: This field contains the NPA, (Area Code), from the
originating location.
Originating Pricing NXX: This field contains the NXX, (Prefix), from the
originating location.
6
Space filled
Zero filled and Right
Justified
Zero filled and Right
Justified
Space filled and
Right Justified
Space filled and Left
Justified.
Space filled and Left
Justified.
12/2/2013 3:06 PM
2.271 Monthly ASCII Layout
New
Field
Number
Name
Starting
Length
Position
38
term_pricing_npa
246
3
39
term_pricing_nxx
249
3
40
Authorization Code Full
252
14
41
univacc
ASCII Monthly Layout
266
10
(Density Codes = "J" & "N")
Description
Terminating Pricing NPA: This field contains the NPA, (Area Code), from the
terminating location.
Terminating Pricing NXX: This field contains the NXX, (Prefix), from the
Terminating location.
Authorization Code: This field contains the full Authorization Code for
Dedicated Access with Authorization Code and Calling Card calls.
Justified
Space filled and Left
Justified.
Space filled and Left
Justified.
Space filled and
Right Justified
Note: If call is Dedicated Access without an Authorization Code, then the
originating trunk number will be populated in this field.
Universal Access Number: This field contains the 8XX number or 950-WXXXX
Space filled and Left
number out-pulsed to the carrier. Also can contain the universal access number for
Justified.
calling cards.
7
12/2/2013 3:06 PM
2.271 Monthly ASCII Layout
New
Field
Number
Name
Starting
Length
Position
(Density Codes = "J" & "N")
Description
Justified
Product Component ID: This field contains the product component id that has been identified for the call. The
following id's are the product component codes that will appear in this field based on the type of call made:
1 = CAN Canadian Call, (Originating or Terminating).
3 = DA Directory Assistance Call.
4 = EMER Emergency numbers.
5 = IDDD International Call, (Originating or Terminating).
6 = IDDTVL International Origination Card Calls only.
7 = MEX Mexican Call, (Originating or Terminating).
11 = USAGE Domestic Usage Call.
234 = International to International Card call, including Mexico and Canada.
3611 = Touch America CAN Canadian Call (Originating or Terminating)
3612 = Touch America DA Directory Assistance Cal
3613 = Touch America EMER Emergency numbers
3614 = Touch America IDDD International Call, (Originating or Terminating)
3616 = Touch America MEX Mexican Call, (Originating or Terminating)
3617 = Touch America USAGE Domestic Usage Call
4435* = Touch America Queued Telecommunications Access Method (QTAM)
42
prcmp_id
276
6
*Touch America can not have International origination calls on the Qwest network.
Orig country
DOMESTIC
CANADA
DOMESTIC
CANADA
CANADA
IDDD
MEXICO
DOMESTIC
CANADA
IDDD
IDDD
IDDD
MEXICO
MEXICO
MEXICO
ASCII Monthly Layout
Zero filled and Right
Justified.
Term country
prcmp_id
Description prcmp_id
IDDD
5
International Usage
IDDD
5
International Usage
CANADA
1
Canadian Usage
DOMESTIC
1
Canadian Usage
CANADA
1
Canadian Usage
DOMESTIC
6
International to U.S.
DOMESTIC
6
International to U.S.
MEXICO
7
Mexico Usage
MEXICO
7
Mexico Usage
IDDD
234
International to International
MEXICO
234
International to International
CANADA
234
International to International
IDDD
234
International to International
MEXICO
234
International to International
CANADA
234
International to International
8
12/2/2013 3:06 PM
2.271 Monthly ASCII Layout
New
Field
Number
Name
Starting
Length
Position
(Density Codes = "J" & "N")
Description
Justified
Carrier Selection: This field contains one of the following 5 different values,
from the DMS 250 switch, which helps clarify the Carrier Identification Code:
43
carrsel
282
1
0 = No indication
1 = Pre-subscribed & 432 not input by calling party
2 = Pre-subscribed & 432 input by calling party
3 = Pre-subscribed, 432 input by calling party Undetermined
4 = Not Pre-subscribed & input the CIC 432 for this call
Space filled
Note: Qwest uses this field to help identify casual callers. Different values are
populated for calls originating on a NGS switch. (Internal use only)
44
cic
283
6
45
origlrn
289
10
46
portedno
299
10
47
lnpcheck
309
1
48
Originating IDDD City
code
310
8
ASCII Monthly Layout
Carrier Identification Code: This field identifies the long distance carrier from
Zero filled and Right
Justified.
the CDR output, example (10432).
Originating Location Routing Number: This field contains an originating LRN.
Space filled and Left
The LRN is received in an ISUP JIP parameter with the SS7 IAM message, or
Justified.
provisioned in the JIP option of table TRKGRP. The number identifies the actual
switch that owns the calling party’s number.
Ported Number: This field contains the actual dialed number if the dialed number
Space filled and Left
has been moved to a new geographical location, i.e. PORTED. The “Called
Justified.
Number” field will be populated with a local routing number from the new
geographical location.
Local Number Portability Check: This field contains one of the following
integers which indicates the use of LNP functionality in the call and if the SCP was
queried for LNP:
0 = No LNP (default)
1 = Incoming bit M set (query made on a previous leg)
2 = Spare
3 = LNP trigger check, Continue response
4 = LNP trigger check, no query
5 = LNP originating query to SCP made
6 = Incoming Home LRN
7 = Home LRN per-originating query to SCP
Originating IDDD City Code: This field contains the international city code for
originating international calls if provided in the switch file.
9
Space filled.
Zero filled and Right
Justified.
12/2/2013 3:06 PM
2.271 Monthly ASCII Layout
New
Field
Number
Name
Starting
Length
Position
49
Terminating IDDD City
code
318
8
50
Originating LATA
326
4
51
Terminating LATA
330
4
52
Class Type
334
2
53
Mexico Rate Step
336
2
54
Estimated Charge
338
6
55
Billing OCN
344
4
ASCII Monthly Layout
(Density Codes = "J" & "N")
Description
Justified
Terminating IDDD City Code: This field contains the international city code for Zero filled and Right
Justified.
terminating international calls if provided in the switch file.
Zero filled and Right
Originating LATA: This field contains the numeric LATA value for the
Justified.
originating location of the call.
Zero filled and Right
Terminating LATA: This field contains the numeric LATA value for the
Justified.
terminating location of the call.
Class Type: This field contains one of the following class type values:
SPACES = NPA/NXX not present or undetermined
0 = Non-Domestic usage calls, not applicable.
1 = Class I
2 = Class II
3 = Class III
4 = Class IV
5 = Class V
6 = All Remaining OCN's
Mexico Rate Step: This field contains a value of 1 - 8 for Mexico calls, dependent
on originating and terminating NPA/NXX.
Space filled and
Right Justified
Space filled and
Right Justified
Note: This field is not valid for platform and wholesale customers.
Estimated Charge: This field contains the estimated charge for the call, excluding
discounts, promotions and taxes.
Zero filled and Right
Justified.
Note: Field format = DDDDCC.
Space filled and
Operating Company Number: This field contains the numeric OCN value for the
Right Justified
pricing location of the call.
10
12/2/2013 3:06 PM
2.271 Monthly ASCII Layout
New
Field
Number
Name
Starting
Length
Position
(Density Codes = "J" & "N")
Description
Justified
Originating / Terminating Code (Call direction indicator): This field contains
one of the following originating / terminating codes:
A = PSTN-TO-IP
B = PSTN-TO-PSTN
C = IP-TO-PSTN
D = PSTN-TO-TERM
E = IP-TO-TERM
F = TERM-TO-IP
G = TERM-TO-PSTN
56
Orig_term_code
ASCII Monthly Layout
348
1
0 = ATM Frame
1 = OFF / OFF = Call originated and terminated at a switched location (SW /
SW).
2 = OFF / ON = Call originated at a switched location and terminated at a
dedicated location (SW / DED).
3 = ON / OFF = Call originated at a dedicated location and terminated at a
switched location (DED / SW).
4 = ON / ON = Call originated at a dedicated location and terminated at a
dedicated location (DED / DED).
5 = 8XX Remote Access VNS
6 = Set the orig term code to 6 if the cainct value is not equal to 4 and the
originating trunk group is dedicated and the terminating trunk group is dedicated
and the call is toll free.
7 = Set the orig term code to 7 if the cainct value is not equal to 4 and the
originating trunk group is dedicated and the terminating trunk group is switched
11
Space filled
12/2/2013 3:06 PM
2.271 Monthly ASCII Layout
New
Field
Number
Name
Starting
Length
Position
(Density Codes = "J" & "N")
Description
Justified
Calling Party Number: This field identifies the calling party number of an
originating SS7 call or value of the Line Number field of the AMA Line Number
parameter when the Line Number Type is calling party identification.
This field is populated as follows when the EDGE_SWITCH parameter in table
OFCVAR is set to Y:
57
clgptyno
349
15
For DAL trunk originations, this field is populated with the optional CPN field
from table TRKGRP.
Space filled and Left
Justified.
For SS7 FGD originations, this field is populated with the contents of the Charge
Number Parameter received from the IXC or LEC/CLEC. If no Charge Number is
received, the Calling Party Number is then populated.
Calling Party Number Identifier: This field contains one of the following calling
party number identifiers:
58
clgptyno_identifier
364
1
59
Filler
365
5
ASCII Monthly Layout
1 = ANI interstate (10 digit ANI with orig state not equal to term state)
2 = ANI intrastate (10 digit ANI with orig state equal to term state)
3 = CPN interstate (10 digit CPN with orig state not equal to term state)
4 = CPN intrastate (10 digit CPN with orig state equal to term state)
5 = ANI , CPN and/or JIP are invalid (ANI, CPN, JIP are present, but not 10
digits or no associated state) and the call was billed interstate
6 = ANI, CPN and/or JIP are missing (ANI, CPN, JIP are blank) and the call was
billed interstate
7 = ANI, CPN and/or JIP are invalid (ANI, CPN, JIP are present, but not 10 digits
or no associated state) and the call was billed intrastate
8 = ANI, CPN and/or JIP are missing (ANI, CPN, JIP are blank) and the call was
billed intrastate
9 = This in an international originated call
A = JIP Interstate (6 digit JIP with ORIG state not equal to term state)
B = JIP Intrastate (6 digit JIP with ORIG state equal to term state)
P = Carrier 8XX Call
Filler: This field is a five digit filler field for future use.
12
Zero filled.
Space filled and
Right Justified
12/2/2013 3:06 PM
2.271 Monthly ASCII Layout
New
Field
Name
Number
60
carriage_return
Starting
Length
Position
370
Total
Length
ASCII Monthly Layout
1
Description
Carriage Return: Indicates a new line for the next record.
(Density Codes = "J" & "N")
Justified
DNA
370
13
12/2/2013 3:06 PM
2.271 Monthly ASCII Layout
New
Field
Number
Name
Starting
Length
Position
(Density Codes = "J" & "N")
Description
Justified
2.271 Monthly ASCII Layout, NOTES
Note #
1
2
3
ASCII Monthly Layout
Note Contents
Fields highlighted in Gray are the fields present in the 2.271 Standard Daily
Extraction Layout.
- If Called Number & Dialed Number = 8XX, then CDR = Dedicated 8XX.
- If Dialed Number = 8XX, then CDR = Switched 8XX.
Prcmp_id 4435* : Touch America Queuing, can be defined as Queued
Telecommunications Access Method (QTAM). This is a program component in a
computer which handles some of the communications processing tasks for an
applications program. QTAM is employed in data collection, message switching
and many other teleprocessing applications. Basically, this is the programmed
voice you hear when you want account information on one of your personal
accounts (banking, credit cards, etc).
14
12/2/2013 3:06 PM