SPEC SHEET
PRODUCT
INFORMATION
MARBLE SHIELD SELF-ADHESIVE FILM
Protect marble and cast polymer from chips and
scratches with the durability of Marble Shield. It provides
an excellent moisture barrier and resists ripping and
tearing with our specialty formula. Marble Shield rolls on
smoothly and removes just as easily, without any residue.
Recyclable Liquid Shield Heavy Duty
PRODUCT SPECIFICATIONS
Film Adhesive Type Adhesion Level Tensile Strength Temperature (Ideal) Humidity (Ideal) Elongation Chemical Name Chemical Family Chemical Formula Trade Name Material Use Low Density Polyethylene
Formulated Acrylic
5 oz/in
1500 psi
70° F
50%
450%
Acrylic PSA Tapes
Acrylic PSA Polyethylene Film
Proprietary
Marble Shield
Surface Protection
AVAILABLE SIZES
MA324600 MA336600
MA524600 MA536600 Clear Clear Clear Clear 24” x 600’ 36” x 600’ 24” x 600’ 36” x 600’ 16 lbs. 3 mil
24 lbs. 3 mil
33 lbs. 5 mil
49 lbs. 5 mil
INSTRUCTIONS
Peel back edge of Marble Shield and begin to unroll. Press down edge
at beginning of area to be covered so Marble Shield adheres. Continue
rolling onto area, applying pressure and smoothing down the film while
doing so. Carefully cut end with a sharp edge. When finished, fold edge of
the film back against the roll to use at a later time. Removal: roll up Marble
Shield and discard.
HANDLING AND STORAGE
FEATURES
• Self-adhering film designed to protect marble
• Protects cultured marble and cast polymer from chips and scratches
• Provides an excellent moisture barrier and resists ripping
and tearing
SAFETY
APPLICATIONS
• Construction • Countertops • Remodeling Recommended for marble finishes, smooth polycarbonate, medium
polish stainless steel, smooth laminates, anodized aluminum, and painted
metals. Ideal for use during fabrication and/or shipping where heavy-duty
protection is required. Helps protect cultured marble and cast polymer
from chips and scratches during shipping and installation.
• Drywall
• Painting
• Parties
SDS sheets for Surface Shields products available by request.
The information in this document was obtained from sources which
we believe reliable. The information is provided without any warranty
expressed or implied regarding its correctness. We do not assume
responsibility for loss, damage or expense in any way connected with
the handling, storage, use or disposal of the product.
© 2015 Surface Shields, Inc. All rights reserved. Product names &
attributes trademark of Surface Shields, Inc. where applicable.
5102.70