Baying system
Baying
Angular baying brackets
The alternative to baying bracket TS 4582.500
and for individual interior installations.
Material:
Sheet steel, zinc-plated, passivated
Supply includes:
Screws M8 x 16 mm.
Combination angle
For optimum distribution of tensile forces during
transportation of bayed enclosures by crane.
Material:
Sheet steel, zinc-plated, passivated
Supply includes:
Assembly parts.
Packs of
Model No. PS
4
4582.000
Also required:
For mounting on:
Horizontal TS enclosure section
cage nuts/threaded blocks M8, see page 1010,
vertical TS enclosure section
snap-on nuts M8, TS 8800.808, see page 1005.
Packs of
Model No. TS
4
4540.000
Accessories:
Top baying cover,
see page 932.
Notes on the transport of bayed enclosures,
see page 929.
Baying attachment, vertical
for TS/TS with divider panel
Only suitable for mounting in conjunction with the
angle brackets of the divider panel (included with
the supply).
Material:
Sheet steel, zinc-plated, passivated
Packs of
Model No. TS
8
8800.470
Note:
May also be used for side or wall attachment/
fastening of enclosures. In such cases, additional
holes must be drilled in the side or rear panel.
Supply includes:
Assembly parts.
for TS/TS
For baying two populated enclosures on the
vertical enclosure section.
Simply locate into the vertical TS punchings,
secure and connect both brackets by using the
hex screws (supplied loose).
Using the fastening bolts, the enclosure is pulled
into a defined end position, with a height or side
offset of up to ± 2 mm.
Baying clamp, horizontal
for back-to-back mounting
Two-piece, for on-site assembly of enclosures
with mounting plate in the rearmost installation
position.
Packs of
Model No. TS
6
8800.670
Material:
Sheet steel 3 mm, zinc-plated, passivated.
Supply includes:
Assembly parts.
Packs of
Model No. TS
4
8800.170
Baying
Baying attachment, vertical
German patent no. 10 157 979
Material:
Sheet steel, zinc-plated, passivated
B
Supply includes:
Assembly parts.
Rittal Catalogue 32/System accessories
7.3
931
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com