DURAN® Glass Bends Durable alternative for pneumatic conveying systems SCHOTT offers high precision glass bends made from optimum conveying systems. The transparency of the glass ensures simple quality DURAN in a wide range of diameters with various monitoring of the material flowing through. With its food bend angles. For reliable protection against electrostatic grade properties glass is perfectly suited for the food industry. ® discharge, it is necessary to provide all tubing with copper conductive tape. Resistance-free flow is ensured by accurately High quality borosilicate glass is distinguished by its durability matching the inner diameter of the glass bends to existing and its favorable price/benefit ratio. Technical Data of DURAN® Glass Bends Glass type Outside diameter Lengths Bending angle Center line radius Borosilicate Glass 3.3 35 up to 90 mm 500 up to 1300 mm up to 90° 200 up to 610 mm Physical Data Coefficient of mean linear thermal expansion (20 ºC; 300 ºC) (DIN ISO 7991) 3.3 10 -6K-1 Transformation temperature Tg (DIN ISO 7884-8) 525 ºC Density at 25 ºC 2.23 g·cm-3 Modulus of elasticity E (Youngs modulus) 63·103 N·mm-2 Thermal conductivity w at 90ºC 1.2 W·m-1·K-1 Log of electric volume resistivity (·cm) at 250º C at 300º C 8.0 6.5 Chemical Resistance Hydrolytic resistance (ISO 719) Class HGB 1 Acid resistance (DIN 12116) Class S 1 Alkali resistance (ISO 695) Class A 2 Technical Data Copper Conductive Tape (extract from manufacturer‘s data sheet) Radial direction: Axial direction: Copper conductive tape applied along outside radius of the bend 20 mm width 10 mm width Material Properties Backing Material soft - copper Colour copper Substrate thickness in mm 0,050 ± 10 % Total thickness in mm 0,080 ± 10 % Adhesive Properties Soft copper Type of adhesive acrylic, electrically conductive Adhesive strength in N/cm (180 º peel from steel) ≥2 DURAN ® Glass Temperature performance (max.) in ºC 130 Short term temperature performance in ºC (ca. 1 h) 180 Flammability according to IEC 60454-2 flame retardant Electrical Properties Wall thickness Fire polished ends Ohmic resistance (testing area two times 1 cm2) ≤1 General Hints: Electrical properties will generally stay intact up to 80ºC, however, they depend on the application / type of assembly. Customer specific tests are strongly recommended. DURAN® is a registered trade mark of the DURAN Group GmbH. SCHOTT AG Erich-Schott-Straße 14 95666 Mitterteich Deutschland Telefon +49 (0)9633/80-0 Fax +49 (0)9633/80-614 [email protected] www.schott.com/tubing 4Cgb10.12.2015RP / Printed in Germany Thermal Properties
© Copyright 2024 Paperzz