Isogen Information
ALIAS SHALL NOT BE LIABLE FOR TECHNICAL OR EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN NOR FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE FURNISHING, PERFORMANCE OR USE OF THIS MATERIAL.
It is the policy of Alias Limited to enforce any and all rights relating to protection of this information. The information contained in this document
is proprietary in nature and may not be reproduced, copied or divulged in whole or in part without the prior written consent of Alias Limited. This
document has been provided pursuant to the terms of a contract or confidentiality agreement. Unauthorised distribution or disclosure of its
contents is a violation of that contract or agreement and persons doing so may be liable for penalties as provided by law.
COPYRIGHT
Copyright © 1991-2002 Alias Limited.
1 Stuart Road,
Manor Park,
Runcorn,
Cheshire,
WA7 1TS,
United Kingdom.
Telephone: +44 (0) 1928 579311
Fax: +44 (0) 1928 579389
E-mail: [email protected]
Web: www.alias.ltd.uk
TRADEMARKS
I-Sketch, I-Sketch Classic, I-Sketch Field, I-Convert, I-Export, I-Run, I-View, I-View CAD, I-Tools, I-Data Integrator, PLANTGEN, SPOOLGEN and
ISOGEN are registered trademarks of Alias Limited.
All other trademarks are the property of their respective owners.
-1-
Isogen Information
Negative Text Records -1 to –199
Isogen
Record
-1
-2
-3
-4
-5
-6 *
-7 *
-8 *
-9 *
-10 *
-11 *
-12 *
-13
-14
-15
-16
-17
-18
-19
-20
-21
-22
-23
-24
-25
*
*
*
*
*
*
*
*
*
records marked with an asterisk can be used with
the 'Frame Text Positioning' facility
Description
Overflow Text record
Spare
Text input for drawing Title Block
Special SKEY input
Used by CADC for PDMS Version Number
Pipeline Name
Spool Prefix Identifier
Revision Identifier
Project Name
Batch Reference / Plant Area Name
Piping Specification Name
Pipeline Nominal Pressure Class / Rating
PCF Equivalent
Data in TITLE-BLOCK file
Data in SPECIAL-INSTRUMENTS file
PIPELINE-REFERENCE
SPOOL-PREFIX
REVISION
PROJECT-IDENTIFIER
BATCH or AREA
PIPING-SPEC
NOMINAL-CLASS or
NOMINAL-RATING
Line Type Identifier
PIPELINE-TYPE
IDF creation Date(or system Date – see option switch6) DATE-DMY
Insulation Specification Name
INSULATION-SPEC
Tracing Specification Name
TRACING-SPEC
Painting Specification Name
PAINTING-SPEC
Specific Gravity of Pipeline contents
SPECIFIC-GRAVITY
Pipeline Temperature
PIPELINE-TEMP
Component Material Item Code
ITEM-CODE
Component Material Description
DESCRIPTION
Component Tag / Name
TAG or NAME
Standard Bend Radius for Pipeline
BEND-RADIUS in Pipe Header Data
Bend Radius for individual bend
BEND-RADIUS in Component Data
System Isometric Name
SYSTEM-ISOMETRIC-REFERENCE
-2-
Isogen Information
-26
-27
-28
-29
-30
-31
-32
-33
-34
-35
-36
-37
-38
-39
-40
-41
-42
-43
-44
-45
-46
-47
-48
-49
-50
-51
-52
-53
-54
*
*
*
*
*
*
*
Change of Piping Specification
BOP ( Bottom of Pipe ) Elevation value
User Defined Spool Name
Equipment / Vessel Trim Name
Pipeline Connection to another Pipeline (CONT ON)
Pipeline Connection to Equipment Item (CONN TO)
Pipeline termination at Open End (OPEN)
Pipeline termination at Closed End (CLOSED)
Pipeline termination at Vent location (VENT)
Pipeline termination at Drain location (DRAIN)
Undefined termination - Only Co-ordinates output
User defined Message on a component
Pipeline Split Point indicator ( -38 ++++ )
Unique Component Identifier
Compound Direction message on a component
User Defined Miscellaneous Specification Name
User Defined Miscellaneous Specification Name
User Defined Miscellaneous Specification Name
User Defined Miscellaneous Specification Name
User Defined Miscellaneous Specification Name
Gearbox Orientation Direction Message
Break In Point Identification Name
1) System Isometric Drawing Split Point Indicator
2) Equipment Trim Isometric Split Point Indicator
Induction Bend Start indicator + Identifier
Induction Bend End indicator
Used for Isogen internal processing
Used for Isogen internal processing
Used for Isogen internal processing
Used for Isogen internal processing
PIPING-SPEC
BOP-ELEVATION
SPOOL-IDENTIFIER
EQUIPMENT-TRIM-REFERENCE
END-CONNECTION-PIPELINE
END-CONNECTION-EQUIPMENT
END-POSITION-OPEN
END-POSITION-CLOSED
END-POSITION-VENT
END-POSITION-DRAIN
END-POSITION-NULL
MESSAGE
ISO-SPLIT-POINT
UNIQUE-COMPONENT-IDENTIFIER
DIRECTION
MISC-SPEC1
MISC-SPEC2
MISC-SPEC3
MISC-SPEC4
MISC-SPEC5
GEARBOX
BIP-IDENTIFIER
SYSTEM-SPLIT
EQUIPMENT-TRIM-SPLIT
INDUCTION-START
INDUCTION-END
-3-
Isogen Information
-55
1) FFI use
-55 ++++
-55 ++++ 1
-55 ++++ 1
-55 ++++ 1
-55 SS28901
FFI Split Point - No Weld
WS FFI Split Point - with Site Weld
WF FFI Split Point - with Field Fit Weld
WO FFI Split Point - with Offshore Weld
FFI Identifier (System Name + Program generated suffix)
-55
2) STORK Division I.D. and Sequence No. system
-55 12345 Sequence Number (Limited to five digits)
-55 **A
Division Identifier
-55
3) General Use
Bypass Closure ( -55 ++++B )
-55
-56
-57
-58
-59
-60
-61 *
-62 *
-63 *
-64
-65
-66
-67
-68
-69
-55 ++++E Open End marker
-55 B01
BIT Identifier
4) Pipeline Start ( -55 ++++START )
Used for Isogen internal processing
Used for Isogen internal processing
Used for Isogen internal processing
Used for Isogen internal processing
Used for Isogen internal processing
COMPIPE Area Identification record ( Redundant )
COMPIPE Drawing Number record ( Redundant )
COMPIPE Description record ( Redundant )
Weight
Spare
Isometric Drawing Output Plotfile Name
Weld Number - User Defined or Repeat
Weld Specification Name
Repeat Part Number (V8.5.0+)
BYPASS-CLOSURE-POINT
START-CO-ORDS
COMPIPE-AREA
COMPIPE-DRAWING-NO
COMPIPE-DESCRIPTION
WEIGHT
OUTPUT-FILE-NAME
REPEAT-WELD-IDENTIFIER
WELD-SPEC
REPEAT-PART-NUMBER
-4-
Isogen Information
-70
-80
-81
-82
-83
-84
-85
-86
-87
-88
-89
-90 *
User Defined Message ( Output in Square Ended
Box )
User Defined Message ( Output in Diamond Ended
Box )
User Defined Message ( Output in Round Ended
Box )
User Defined Message ( Output in Triangular Box )
User Defined Message ( Output in Diamond shaped
Box )
User Defined Message ( Output in a Circle )
Port Reference for Multi-port component
Spare
Detailed Sketch Filename
Information Note Filename
Remark Identification Number
N.B. Remarks may be attached to either a WELD
or a COMPONENT
Component - Optional Material Description record
Component - Optional Material Description record
Component - Optional Material Description record
Component - Optional Material Description record
Component - Optional Material Description record
Component - Optional Material Description record
Component - Optional Material Description record
Component - Optional Material Description record
Component - Optional Material Description record
Component - Optional Material Description record
Pipeline Isometric Drawing sequence Number
-91 *
Spool Sheet Isometric Drawing sequence Number
-92 *
-93
Client Drawing Name
Highest Site Assembly Identification Number
-71
-72
-73
-74
-75
-76
-77
-78
-79
MESSAGE-SQUARE
MESSAGE-POINTED
MESSAGE-ROUND
MESSAGE-TRIANGLE
MESSAGE-DIAMOND
MESSAGE-CIRCLE
PORT-POINT?
DETAIL-SKETCH-IDENTIFIER
1) WELD-REMARK-NUMBER
2) COMPONENT-REMARK-NUMBER
Any User Defined Word
Any User Defined Word
Any User Defined Word
Any User Defined Word
Any User Defined Word
Any User Defined Word
Any User Defined Word
Any User Defined Word
Any User Defined Word
Any User Defined Word
PIPELINE-DRAWING-SEQUENCENUMBER
SPOOL-DRAWING-SEQUENCENUMBER
CLIENT-DRAWING-IDENTIFIER
HIGHEST-ASSEMBLY-NUMBER
-5-
Isogen Information
-94
-95
-96
-97
-98
-99
-100
-101
-102
-103
-104
-105
-106
-107
-108
-109
-110
-111
-112
-113
-114
-115
-116
-117
(Repeatability function)
Highest Spool Number (Repeatability function)
Highest Unique Identifier (Repeatability function)
Highest Pipe Support Weld Number used
(Repeatability function)
Highest Weld Number used (Repeatability function)
Highest Part Number used (Repeatability function)
Pipeline Isometric or Spool Isometric
Re-plotting indicator
IDF or PCF Input filename
Drawing Frame ( Backing Sheet ) Input filename
Isometric Output Plotfile Name Prefix characters
User Defined Symbols Input filename
Material Control Output filename
Messages Output filename
PDMS Error Message file
( CADC only - not used by Alias )
PDMS 'Resume' identifier
( CADC only - not used by Alias )
Printed Material List Output filename
Centreline Length Summary Output filename
Centreline Length / Insulation Output filename
Stressing Interface Output filename
Pipe Support Summary Output filename (Overwrite)
(alternative to –114 file)
Pipe Support Data Output filename - Binary
Pipe Support Information Output filename
(alternative to –112 file)
Materials - Sheet Output filename (Overwrite)
Cut Pipe List Summary Output filename (Overwrite)
(alternative to –129 file)
Repeatability Return Output filename
HIGHEST-SPOOL-NUMBER
HIGHEST-UNIQUE-IDENTIFIER
HIGHEST-SUPPORT-WELD-NUMBER
HIGHEST-WELD-NUMBER
HIGHEST-PART-NUMBER
REPLOT
DRAWING-FRAME
PLOTFILE-PREFIX
BINARY-SYMBOLS
MATERIAL-CONTROL
MESSAGE
PRINTED-MATERIAL-LIST
CENTRELINE-LENGTH
CENTRELINE/INSULATION-LENGTH
SUPPORT-SUMMARY
SUPPORT-INFORMATION-FILE
MATERIAL/SHEET-IDENTIFICATION
CUT-LIST-SUMMARY
REPEATABILITY-RETURN
-6-
Isogen Information
-118
-119
-120
-121
-122
-123
-124
-125
-126
-127
-128
-129
-130
-131
-132
-133
-134
*
*
*
*
*
-135 *
-136 *
-137
-138
-139
-140
-141
-142
-143
-144
COMPIPE - LINE and MTO filenames (Redundant)
Font Input filename ( CADC only - not used by Alias )
Welding Definition File Input filename
Material List Remarks Input filename
Materials Definition File Input filename
Data Definition File Input filename
Detail Sketch directory Input name
Weld Summary Output filename (Append)
(alternative to –126 file)
Weld Summary Output filename ( Overwrite )
(Is
alternative to –125 file)
Bending Information Output filename ( Append )
(Is
alternative to –128 file)
Bending Information Output filename ( Overwrite ) (Is
alternative to –127 file)
Cut List Summary Output filename ( Append )
(Is alternative to –116 file)
General Weld Prefix
Fabrication Weld Prefix
Erection ( Site / Field ) Weld Prefix
Offshore Weld Prefix
Fabrication Support Weld Prefix
Erection Support Weld Prefix
Offshore Support Weld Prefix
Spare
Spare
Spare
Function Definition Input filename
Component Information Input filename
Insulation Weights Input filename
Specific Gravity Input filename
C of G Output filename
WELDING-DEFINITION
REMARKS
MATERIAL-LIST-DEFINITION
DRAWING-DEFINITION
DETAIL-SKETCH-DIRECTORY
WELD-SUMMARY-APPEND
WELD-SUMMARY-OVERWRITE
BENDING-FILE-APPEND
BENDING-FILE-OVERWRITE
CUT-LIST-SUMMARY-APPEND
WELD-PREFIX-GENERAL
WELD-PREFIX-FABRICATION
WELD-PREFIX-ERECTION
WELD-PREFIX-OFFSHORE
SUPPORT-WELD-PREFIXFABRICATION
SUPPORT-WELD-PREFIX-ERECTION
SUPPORT-WELD-PREFIX-OFFSHORE
FUNCTION-DEFINITION
COMPONENT-INFORMATION
INSULATION-WEIGHT
SPECIFIC-GRAVITY
WEIGHT/COFG-SUMMARY-APPEND
-7-
Isogen Information
-145
C of G Output filename
-146
-147
Bolting Information Input filename
STORK - Data Output Transfer file to
ACCESS system
STORK - Data Output Transfer file to
ACCESS system
STORK - Data Output Transfer file to
ACCESS system
Traceability Output filename
STORK - Attribute storage file
Text Font Definition Input filename
-148
-149
-150
-151
-152
-153
-154
-155
-156
-157
-158
-159
-160
-161
-162
-163
-164
-165
-170
-171
-172
-173
-174
Bulk Materials Output filename
Spool Information Output filename
Site Weld Information Output filename
Pipeline Attributes Input filename
Heat Treatment/NDE Input filename
Drawing Information Cross Reference Output
filename
Bending database file
Bending report file
Ascii symbols file
Drawing report file
Site assembly file (append type)
Site assembly file (overwrite type)
Pipe Cutting file
Spool Attribute 1
Spool Attribute 2
Spool Attribute 3
Spool Attribute 4
Spool Attribute 5
WEIGHT/COFG-SUMMARYOVERWRITE
BOLT-INFORMATION-FILE
REGISTRATION-INFORMATION-FILE
FABRICATION-INFORMATION-FILE
ERECTION-INFORMATION-FILE
TRACEABILITY-FILE
ATTRIBUTE-FILE
FONT-INFORMATION-FILE
BULK-MATERIAL-LIST
SPOOL-INFORMATION-FILE
SITE-WELD-INFORMATION-FILE
PIPELINE-ATTRIBUTES-FILE
HEATTREATMENT/NDE-FILE
DRAWING-CROSS-REF-FILE
BENDING-DATABASE_FILE
BENDING-REPORT-FILE
ASCII-SYMBOLS
DRAWING-REPORT-FILE
SITE-ASSEMBLY-FILE-APPEND
SITE-ASSEMBLY-FILE-OVERWRITE
PIPE-CUTTING-FILE
SPOOL-ATTRIBUTE1
SPOOL-ATTRIBUTE2
SPOOL-ATTRIBUTE3
SPOOL-ATTRIBUTE4
SPOOL-ATTRIBUTE5
-8-
Isogen Information
-175
-176
-177
-178
-179
-180
-181
-182
-183
-184
-185
-186
-187
-188
-189
-190
-191
-192
-193
-194
-195
-196
-197
-198
-199
Spool Attribute 6
Spool Attribute 7
Spool Attribute 8
Spool Attribute 9
Spool Attribute 10
Weld Attribute 1
Weld Attribute 2
Weld Attribute 3
Weld Attribute 4
Weld Attribute 5
Weld Attribute 6
Weld Attribute 7
Weld Attribute 8
Weld Attribute 9
Weld Attribute 10
Component Attribute
Component Attribute
Component Attribute
Component Attribute
Component Attribute
Component Attribute
Component Attribute
Component Attribute
Component Attribute
Component Attribute
1
2
3
4
5
6
7
8
9
10
SPOOL-ATTRIBUTE6
SPOOL-ATTRIBUTE7
SPOOL-ATTRIBUTE8
SPOOL-ATTRIBUTE9
SPOOL-ATTRIBUTE10
WELD-ATTRIBUTE1
WELD -ATTRIBUTE2
WELD -ATTRIBUTE3
WELD -ATTRIBUTE4
WELD -ATTRIBUTE5
WELD -ATTRIBUTE6
WELD -ATTRIBUTE7
WELD -ATTRIBUTE8
WELD -ATTRIBUTE9
WELD -ATTRIBUTE10
COMPONENT-ATTRIBUTE1
COMPONENT -ATTRIBUTE2
COMPONENT -ATTRIBUTE3
COMPONENT -ATTRIBUTE4
COMPONENT -ATTRIBUTE5
COMPONENT -ATTRIBUTE6
COMPONENT -ATTRIBUTE7
COMPONENT -ATTRIBUTE8
COMPONENT -ATTRIBUTE9
COMPONENT -ATTRIBUTE10
-9-
Isogen Information
AText Records
-201
-202
-203
-204
-205
-206
-207
-208
-209
-210
-211
-212
-213
-214
-215
-216
-217
-218
-219
-220
-221
-222
-223
-224
-225
-226
-227
-228
E
N
W
S
EL +
EL NS (set to ? to automatically determine the format used for outputting the nominal size
message)
CONN. TO
CONT. ON
F
G
B
SPINDLE
MM
REDUCING FLANGE
OFFSET
MITRE
LOBSTER
REINFORCED
LEFT LOOSE
FFW
FALL
DEGREES (left blank)
:
% (left blank)
GRAD
PER M
PER FT
- 10 -
Isogen Information
-229
-230
-231
-232
-233
-234
-235
-236
-237
-238
-239
-240
-241
-242
-243
-244
-245
-246
-247
-248
-249
-250
-251
-252
-253
-254
-255
-256
-257
-258
-259
-260
SCREWED END
VENT (used in conjunction with -34 record)
BEND
SPEC
C
START
COMMENCE
S
"
'
DRAIN (used in conjunction with -35 record)
(used in conjunction with -32 record)
(used in conjunction with -33 record)
(used in conjunction with -36 record)
(used with reducers IE - FLAT)
UP
DOWN
NORTH
SOUTH
EAST
WEST
DATE
PROJECT NO.
BATCH REF
PIPING SPEC
ISS
DRG
OF
SPL
JAN
FEB
MAR
- 11 -
Isogen Information
-261
-262
-263
-264
-265
-266
-267
-268
-269
-270
-271
-272
-273
-274
-275
-276
-277
-278
-279
-280
-281
-282
-283
-284
-285
-286
-287
-288
-289
-290
-291
-292
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
DEC
THERMAL INSULATION SPEC
TRACING SPEC
PAINTING SPEC
LG
default is blank - used as delimeter for spool i.d.
SWEPT TEE
CONT. FROM
ORIFICE FLANGE
DIAL FACE
L
TAPPING
TAIL
WINDOW
FLAT (used when reducer flat in skew)
TEE BEND
RATING FLANGE
Default is blank - used for screwed end message on erection fittings)
ORIENTATION DIRECTION
PIPE
MATL
INSUL
TRACE
PAINT
- 12 -
Isogen Information
-293
-294
-295
-296
-297
-298
-299
-300
-301
-302
-303
-304
-305
-306
-307
-308
-309
-310
-311
-312
-313
-314
-315
-316
-317
-318
-319
-320
-321
-322
-323
-324
null - used for spec change -41 record
null - used for spec change -42 record
null - used for spec change -43 record
null - used for spec change -44 record
null - used for spec change -45 record
TEE ELBOW
COMDACE ITEM CODE DELIMETER
FABRICATION MATERIALS
PT
NO
COMPONENT DESCRIPTION
N.S.
ITEM CODE
QTY
PIPE
FITTINGS
FLANGES
ERECTION MATERIALS
GASKETS
BOLTS
VALVES / IN-LINE ITEMS
INSTRUMENTS
SUPPORTS
PIPE SPOOLS
PIPE NS
CL LENGTH
CUT PIPE LENGTHS
PIECE
NO
CUT
LENGTH
REMARKS
- 13 -
Isogen Information
-325
-326
-327
-328
-329
-330
-331
-332
-333
-334
-335
-336
-337
-338
-339
-340
-341
-342
-343
-344
-345
-346
-347
-348
-349
-350
-351
-352
-353
-354
-355
-356
default is blank - used for spool separators
PLD BEND
LOOSE FLG
FF WELD
M
INS
MM
PAGE
PIPELINE REF
S (used to signify special end flange)
WITH SPECIAL RATING FLANGE(S) (SEE ISO)
SYSTEM REF
D BEND RADIUS
BEND RADIUS
MISCELLANEOUS COMPONENTS
INDUCTION BEND ID EQUIPMENT TRIM MATERIALS
NOZZLE REF CONTINUED
END CONNECTOR
AND
GEARBOX ORIENTATION
used for continuations on - material list
used for continuations from - material list
PP
REDUCING ELBOW
FABRICATED (PULLED) BEND
WEIGHT
KGS
LBS
TOTAL WEIGHT - THIS DRG
U
- 14 -
Isogen Information
-357
-358
-359
-360
-361
-362
-363
-364
-365
-366
-367
-368
-369
-370
-371
-372
-373
-374
-375
-376
-377
-378
-379
-380
-381
-382
-383
-384
-385
-386
B
W
default is blank - used for bolt units
FT
FT-INS
END$ONE
END$TWO
ITEM$CODE
default is blank - used for part$no on cut list
SQ.CUT
BEVEL
SCREWED
SHAPED
MITRED
OFFSHORE MATERIALS
REMARKS
REM
ANGLE
WELDS
FAB
EREC
OFF
TOTAL FABRICATION WEIGHT
TOTAL ERECTION WEIGHT
TOTAL OFFSHORE WEIGHT
TOTAL WEIGHT UNLISTED ITEMS
* (missing weight character)
TANGENT+
CUT/WELD
-387
-388
default is blank (used for heat tracing length)
TANGENTIAL CONNECTION
default is blank (used for insulation length)
- 15 -
Isogen Information
-389
-390
-391
-400
-401
-402
-403
-404
-405
-406
-407
-408
-409
-410
-411
-412
OFFSET CONNECTION
FROM ? ORIGIN
default is blank - used to show Weld/Connections that have not been adjusted to
incorporate Gap/Shrinkage
TRACED PIPE
LAGGED PIPE
PIPE SUPPORT
COMPN JOINT
SCREWED JOINT
SOCKET WELD
FIELD WELD
SHOP WELD
used for box at bottom of drawing eg. (pulled bend radius is 3x nominal pipe bore)
used for box at bottom drawing eg. (all flanges 150p rating unless stated otherwise)
[1] DENOTES PIPE SPOOL NO 1 DENOTES PARTS LIST NO
SITE CONNECTION
WELD|SHOP|WELD|WELDER|VISUAL|NDT|HARD|S.R|FAB.QA
-413
NO |/FLD|PROC| ID |ACCEPT|NO | NO |
-414
-415
-416
-417
-418
-419
-420
-421
-422
-423
-450
-451
-452
S
F
O
BW
SW
MW
LUG
SOF
SOB
LET
B.O.P.
TAPPING CONNECTION
UNACCEPTABLE SPLIT
|ACCEPT
- 16 -
Isogen Information
-453
-454
-455
-456
-457
-458
-459
-460
-461
-462
-463
-464
-465
-466
-467
-468
-469
-470
-471
-472
-473
-474
-475
-476
-477
-478
-481
-482
-483
-484
-485
-486
MMCONNECTION ORIENTATION
(elevations at flange face IE ?$FLANGE FACE)
SEE DETAIL ?
MITRE ?
Default is blank - used for metric bore units
? THK
BEAM$?
COLUMN$?
?$BUILDING CL
CL EQUIPMENT$?
CL PIPELINE$?
?$FLOOR LEVEL
?$WALL
GRID LINE$?
default is blank - used for user defined reference description
REFERENCE POINT
SUPPORT LOCATION
LOCATION-POINT?
NO.?
OF
ABOVE
default is blank - used to trigger drawing identifiers in Spoolgen
default is blank - used for drawing identifiers in Spoolgen
CUT OUT ?
J
E
N
W
S
U
D
- 17 -
Isogen Information
-487
-488
-489
-490
-491
-492
-493
-494
-495
-496
-497
-498
-499
-500
-501
-502
-503
-504
-507
-508
-509
-510
-511
-512
-513
-514
-515
-516
-517
-518
-519
-520
*** REFERENCE FLAT ***
*** REFERENCE SPINDLE ***
*** REFERENCE SUPPORT ***
*** REFERENCE BRANCH ***
*** REFERENCE WINDOW ***
FLAT DIRECTION
SPINDLE DIRECTION
SUPPORT DIRECTION
BRANCH DIRECTION
WINDOW DIRECTION
FLANGE ROTATION ?
Default is blank - SITE WELD
SHOP TEST WELD
SHOP TEST
Default is blank - OFFSHORE WELD
SUPPORT
SPOOL ID
default is blank - used for ffw weld category
RPD
LF
L4
default is blank - used for part no / weld delimeter
PAD
TACK WELD
TW
REINFPAD
REINFORCEMENT PAD FOR@
TRN
5 (used to indicate manual weld)
1 (used to indicate automatic weld)
EB (used in weld box)
RL (used in weld box)
- 18 -
Isogen Information
-521
-522
-523
-524
-525
-526
-527
-528
-529
-530
-531
-532
-533
-534
-535
-536
-537
-538
-539
-540
-541
-542
-543
-544
-545
FW
Default is blank (reinforced set-on tee)
Default is blank (reinforced angled set-on tee)
Default is blank (angled seton tee)
default is blank (half coupling weld)
default is blank (reinforced tee / pad to main)
Default is blank (reinforced tee / pad to branch)
Defaul is blank (trunnion d2 type weld)
default is blank (trunnion d4 type weld)
default is blank (trunnion d5 type weld)
default is blank (trunnion d6 type weld)
default is blank (trunnion d7 type weld)
FI
RL
SU
VL
default is blank (used for style 3/4 pipe quan units)
default is blank (used for bolting data)
.
default is blank (used for alternative bolting ns)
_N
_S
default is blank (used for special information note)
default is blank (used for showing additional material)
/ (used for additional material delimeter)
- 19 -
Isogen Information
User Defined Attribute Block
Isogen
Record
-600 *
to –699 *
Description
Attributes -600 to -699 are for User Defined
attributes in Isogen
PCF Equivalent
ATTRIBUTE0 to
ATTRIBUTE99
Minus 700 Series – TextPos
Isogen
Record
Description
-700 *
North Arrow X-Y Position on isometric
-701
-702 *
Spare
Drawing (Sheet) Number
-703 *
Number of Drawings (Sheets)
-704
-705
-706
-707
-708
-709
-710
-711
-712
-713
-714
-715
Total Weight for a Drawing
Total Fabrication Weight
Total Erection Weight
Total Offshore Weight
Flange Part Number ( Flat Spools )
Flange Rotation Angle ( Flat Spools )
Total Weight Unlisted Items
Total Weight of Pipeline
Total Wet (Full) Weight of Pipeline
Total Insulation Weight for Pipeline
C of G Position of Dry (Empty) Pipeline
C of G Position of Dry Pipeline + Insulation
*
*
*
*
*
*
*
*
*
*
*
*
PCF Equivalent
Use a -700 record in the
POSITIONED-TEXT file
Use a -702 record in the
POSITIONED-TEXT file
Use a -703 record in the
POSITIONED-TEXT file
- 20 -
Isogen Information
-716
-717
-718
-719
-720
-721
-722
-723
-724
-725
-726
-727
*
*
*
*
*
*
*
*
*
*
*
*
C of G Position of Wet (Full) Pipeline
C of G Position of Wet Pipeline + Insulation
Total Pipeline Fabrication Weight
Total Pipeline Erection Weight
Total Pipeline Offshore Weight
Zone 1 Identifier STORK
Zone 2 Identifier STORK
Zone 3 Identifier STORK
STORK Sequence Number
Spool Weight ( Style 4 Material List )
Spool C of G Position ( Style 4 Material List )
Weld Diameter Inches ( Spools )
-728 *
-729 *
Spool C.L. Length
Spool Erection Factor
-730
-731
-732
-733
Pipeline Erection Factor
Weld Diameter Inches (Pipeline)
Location Point - to nearest Steelwork Stanchion
Location Point - above nearest Floor Level
*
*
*
*
- 21 -
Isogen Information
AText's -800 to -899
Used in Spoolgen Probing and FFI
-800
-801
-802
-803
-804
-805
-806
-807
-808
-809
-810
-811
-812
-813
-814
-815
-816
-817
-818
-819
-820
-821
-822
-823
-824
-825
-826
BEND
ELBOW
OLET
TEE
CROSS
REDUCER
TEE REDUCER
REDUCING FLANGE
TEE BEND/ELBOW
ANGLE VALVE
3 WAY VALVE
4 WAY VALVE
INSTRUMENT
MISC COMPONENT
PIPE (TUBE
FIXED PIPE
PIPE BLOCK
FLANGE
LJSE FLANGE
BLIND FLANGE
CONNECTOR
BACKING NUT
CLAMP
MISC HYGENIC COMPONENT
CAP
COUPLING
UNION
- 22 -
Isogen Information
-827
-828
-829
-830
-831
-832
-833
-834
-835
-836
-837
-838
-839
-840
-841
-842
-843
-844
-845
-846
-847
-848
-849
-850
-851
-852
-853
-854
-855
-856
-857
-858
-859
-860
VALVE
TRAP
VENT
FILTER
SUPPORT
INSTRUMENT TEE
WELD
NONE
Unused
Unused
Unused
Unused
Unused
Changed to Bend
Flange set to Loose
Detail Sketch ?
Support changed to Fabrication
Support changed to Erection
Support changed to Offshore
Tack Weld
Support Weld(s added
Automatic Weld
Shop Test
REDUCING-CONCENTRIC
REDUCING-ECCENTRIC
STUB/BACKING PAIR
SCREWED
SLIP-ON J TYPE
SLIP-ON
SOCKET-WELD
WELD-NECK
SLIP-ON ORIFICE
WELD-NECK ORIFICE
LAP-JOINT RING
- 23 -
Isogen Information
-861
-862
-863
-864
-865
-866
-867
-868
-869
-870
-871
-872
-873
-874
-875
-876
-877
-878
-879
-880
-881
-882
-883
-884
-885
-886
-887
-888
-890
-891
-899
LAP-JOINT STUB END
UNKNOWN
Material added
General Information Note - ?
Specific Information Note - ?
Weld deleted
Support Weld(s deleted
Spool Name deleted
Flow Arrow deleted
Message deleted
Detail Sketch deleted
Information Note deleted
Additional Material deleted
Loose Flange un-set
Location point added
Location point deleted
FLOOR/WALL PENETRATION
FLOW ARROW
INSULATION SYMBOL
MESSAGE
Drawing Identifier deleted
Default Start
Pipeline Start
Default Bypass Closure
Used as delimiter in FFISYS
Bypass Closure
Pipe Support Added
Pipe Support Deleted
Coupling Added
Coupling Deleted
Properties Changed
- 24 -
Isogen Information
Alternative User Defined
Attribute Block
Isogen
Record
-900 *
to –999 *
Description
PCF Equivalent
ATTRIBUTE100 to
Records -900 to -999 are normally used for
ATTRIBUTE199
Fabricator defined Pipeline Attributes in Spoolgen
and for Pipeline Attributes and Heat / NDE attributes extracted from -156 and -157 files
Component Records
Isogen
Record
30/31
35/36
Description
Bend or U Bend
1) Elbow
2) Reducing Elbow
40/41/42
1) Olet
2) Instrument Tee
45/46/47
1) Tee
2) Tee Set On branch
3) Tee Stun In branch
50/51/52/53 1) Cross
2) Cross Set On branch
3) Cross Stub In branch
55
1) Concentric Reducer
2) Eccentric Reducer
60/61/62
1) Concentric Teed Reducer
2) Eccentric Teed Reducer
65
1) Reducing Flange Concentric
2) Reducing Flange Eccentric
PCF Equivalent
BEND
ELBOW
ELBOW-REDUCING
OLET
INSTRUMENT-TEE
TEE
TEE-SET-ON
TEE-STUB
CROSS
CROSS-SET-ON
CROSS-STUB
REDUCER-CONCENTRIC
REDUCER-ECCENTRIC
REDUCER-CONCENTRIC-TEED
REDUCER-ECCENTRIC-TEED
FLANGE-REDUCING-CONCENTRIC
FLANGE-REDUCING-ECCENTRIC
- 25 -
Isogen Information
70/71/72
1) Tee Bend
2) Tee Elbow
75/76
Angle Valve
80/81/82
3 Way Valve
85/86/87/88 4 Way Valve
90
Instrument Dial
90/93
1) Instrument Straight through
2) Instrument Angled
3) Instrument Offset
4) Instrument Return
90/91/93
3 Way Instrument
90/91/92/93 4 Way Instrument
95/96
1) Misc Component Straight through
2) Misc Component Angled
3) Misc Component Offset
4) Misc Component Return
100
101
102
103
104
105
106
107
110
111
112
113
114
115
120
125
Pipe
Fixed Length Pipe
Fixed Length Pipe Block
Variable Length Pipe Block
Gap component
Flange
1) Lap Joint Stub End
2) Lap Joint Stub Ring
Blind Flange
Gasket
Hygenic Connector
Hygenic Backing Nut
Hygenic Clamp
Hygenic Misc. Component
Bolt
Weld
Cap
BEND-TEED
ELBOW-TEED
VALVE-ANGLE
VALVE-3WAY
VALVE-4WAY
INSTRUMENT-DIAL
INSTRUMENT
INSTRUMENT-ANGLE
INSTRUMENT-OFFSET
INSTRUMENT-RETURN
INSTRUMENT-3WAY
INSTRUMENT-4WAY
MISC-COMPONENT
MISC-COMPONENT-ANGLE
MISC-COMPONENT-OFFSET
MISC-COMPONENT-RETURN
MULTI-PORT-COMPONENT
PIPE
PIPE-FIXED
PIPE-BLOCK-FIXED
PIPE-BLOCK-VARIABLE
GAP
FLANGE
LAPJOINT-STUBEND
LAPJOINT-RING
FLANGE-BLIND
GASKET
CONNECTOR
NUT
CLAMP
MISC-HYGIENIC
BOLT
WELD
CAP
- 26 -
Isogen Information
126
127
130
132/133
134
136/137
140
150
1) Coupling
2) Elbolet
Union
Valve - Straight or Reducing
1) Trap - Straight through
2) Trap Angled
3) Trap Offset
4) Trap Return
Safety Disc / Vent
1) Filter Straight through
2) Filter Angled
3) Filter Offset
4) Filter Return
Instrument Balloon
Pipe Support
COUPLING
ELBOLET
UNION
VALVE
TRAP
TRAP-ANGLE
TRAP-OFFSET
TRAP-RETURN
SAFETY-DISC
FILTER
FILTER-ANGLE
FILTER-OFFSET
FILTER-RETURN
INSTRUMENT-BALLOON
SUPPORT
- 27 -
Isogen Information
Special Type Records
Isogen
Record
Description
PCF Equivalent
0
3
Additional Bore
Text Positioning ( TextPos ) record
148
1) Drawing Split Point ( 148 record used together with ISO-SPLIT-POINT
a -38 record )
CO-ORDS data
149
Data in POSITIONED-TEXT file
2) Spool Identifier positioning record ( 148 record used SPOOL-IDENTIFIER
together with a -28 record )
CO-ORDS data
TEXT
Location records
MESSAGE
1) Positioned Comment ( 148 record used together
with a -37 record )
CO-ORDS data
N.B. Where a 149 record appears with an associated 70 to -75 type record then the following types of PCF
commands are generated
149 & -70
149 & -71
149 & -72
149 & -73
MESSAGE-SQUARE
CO-ORDS data
TEXT data
MESSAGE-SQUARE
CO-ORDS data
TEXT data
MESSAGE-ROUND
CO-ORDS data
TEXT data
MESSAGE-TRIANGLE
CO-ORDS data
TEXT data
- 28 -
Isogen Information
149 & -74
149 & -75
2) Location Point
3) Floor Symbol
4) Flow Arrow
5) Insulation Symbol
6) Reference Dimension
151
152
153
160
Reference Dimension - Primary ( Record structure is
149 151 153 )
Reference Dimension - Skewed ( Record structure is
149 152 153 )
Reference Dimension - Referenced Item Centre
Line orientation
Additional Material Item - Associated with a
Pipeline component
MESSAGE-DIAMOND
CO-ORDS data
TEXT data
MESSAGE-CIRCLE
CO-ORDS data
TEXT data
LOCATION-POINT
CO-ORDS data
SKEY LOPT
FLOOR-SYMBOL
CO-ORDS data
SKEY data
FLOW-ARROW
CO-ORDS data
FLOW data
SKEY data
INSULATION-SYMBOL
CO-ORDS data
SKEY data
REFERENCE-DIMENSION
REFERENCE-POINT-LOCATION
CO-ORDS data
DIMENSIONED
REFERENCE-DIMENSION-PRIME
CO-ORDS data
REFERENCE-DIMENSION-SKEWED
CO-ORDS data
REFERENCED-ITEM
CO-ORDS data
CO-ORDS data
ITEM-DIRECTION data
ADDITIONAL-ITEM ( This entry
must appear starting in column position 5
under a main component item )
- 29 -
Isogen Information
161
Additional Material Item - Independent
200
201
300
301
501
502
Tapped Branch ( Tapping Point ) Start
Tapped Branch ( Tapping Point ) End
Large Co-ordinate offset - Metric Units
Large Co-ordinate offset - Imperial Units
Alternative Fitting Symbol - Symbol parameters
Alternative Fitting Symbol - Symbol definition
( Points and Lines )
Always handled as an Additional Item
Listed in a -31 connection record
Used on Fabricated Tees and Crosses
End of File Marker
999
ADDITIONAL-ITEM ( This entry
appears as a stand alone item )
TAP-CONNECTION
OFFSET-METRIC
OFFSET-IMPERIAL
Skipped
Skipped
LUGG
NOZZLE
REINFORCEMENT-PAD
- 30 -
Isogen Information
IDF Component Structure
Word No.
Field Use
1
2
3
4
5
6
7
8
Component Type Identifier - e.g. 100 for PIPE
Start Point Co-Ordinate - East / West
Start Point Co-Ordinate - North / South
Start Point Co-Ordinate - Elevation +/End Point Co-Ordinate - East / West
End Point Co-Ordinate - North / South
End Point Co-Ordinate - Elevation +/Pipe Bore
9
1) Item Code / Description Pointer
2) Reinforcement Pad Item Code on Reinforced
Tees
10
Component Weight
See Component Records section for details
Value is in 100th MM integer numbers
Value is in 100th MM integer numbers
Value is in 100th MM integer numbers
Value is in 100th MM integer numbers
Value is in 100th MM integer numbers
Value is in 100th MM integer numbers
Value is in 1/16th’s Inch for Inch bores or in MM's for Metric bores –
e.g. 3" bore = 48 25 MM bore = 25
1) Item Codes are held in a series of vertically arranged –20 records at the
bottom of the IDF. The value here is a pointer to that section. The Material
Description of an Item Code is held in the –21 record that immediately follows
the –20 record.
2) The 4th 5th and 6th digit positions of this record, if present, are used for a
pointer to the Reinforcement Pad Item Code on a Reinforced Tee component.
3) The 7th 8th and 9th digit positions of this record, if present, are used for a
pointer to the Repeat Part Number of a component.
Value is held as a real or integer number and may be in LBS or KGS depending on the setting in O.S. 41 ( Held to the nearest 1/10th LB or KG )
Tons or Tonnes can be represented by use of a decimal point (eg. 1.67)
- 31 -
Isogen Information
11
Carries up to 5 items of information
12
SKEY ( Symbol Key )
1) Units position - Only used for Pipe to indicate the Pipe End condition.
1= Screwed end at start of pipe
2= Screwed end at end of pipe
3= Screwed end at both ends of pipe
2) Tens, Hundredth’s and Thousands position - Only used for Pipe to calculate
the Pipe Wastage amount. Values held here are 1/10 th’s percentage Wastage
amounts. e.g. 4%=40 12.5%=125
3) In the Ten Thousands position - Plant Area Identification Number in the
range 1 to 9.
4) One Hundred Thousands position. – Used to indicate the pipework style.
0= Standard Pipework
1= Dotted Pipework, Undimensioned
2= Dotted Pipework, Dimensioned
5) In the Millions position – Used to control whether or not the component is to
appear in the BOM and isometric, and if so, how.
0= Component Item Code to appear on the BOM with a Part Number on the
isometric
1= Component not to appear on the BOM nor on the isometric
2= The Component Item Code to appear both on the BOM and on the
isometric underneath the Part Number.
Normally 2 or 4 characters, but can be blank.
- 32 -
Isogen Information
13
Carries up to 4 items of mutually exclusive
information for a component
1) ANGLE. Holds the Angle value of certain type of component – e.g. Bend,
Elbow or Tee.
The value held is in 1/100th’s Degree. e.g. 45 degrees = 4500, 90 degrees =
9000
2) BOLT LENGTH. In 115 Bolt records - holds the Bolt Length either in whole
MM’s or 1/16th’s Inch depending on the units in use e.g. 115 MM or 48 for 3”
3) FLANGE PROTRUSION LENGTH. Only set on certain types of 105 Flange
records that have special welding on requirements. That is, those types where
the Pipe protrudes through the Flange prior to welding. The value held must
only be in whole MM’s.
4) INDIVIDUAL TAPPING CO-ORDINATES ON /OFF. Applies only to 200 type
Tapping Co-Ordinate records. Values may be –
0 = Output Tapping Co-Ordinates
1 = Suppress Tapping Co-Ordinates
- 33 -
Isogen Information
14
Carries up to 5 items of information
1) Units position – Fab / Erect / Offshore classification
0= No classification
1= Fabrication Item
2= Erection Item
3= Offshore Item
2) Tens position – Fluid Flow
0 or blank = Fluid Flow in direction built
1= Fluid Flow opposite to direction built
3) Hundreds position – Primary Direction for the following – Valve Spindle, Flat
Side on Eccentric Reducer, Instrument Dial Face, Sight Glass Window, Orifice
Plate Tapping, Spectacle Plate Tail, Slip Plate Tail and Support
0 or blank = No Direction
1= North
2= South
3= East
4= West
5= Up
6= Down
4) Thousands position – Insulation / Tracing indication
0 or blank= No Tracing or Insulation
1= Insulated
2= Heat Traced
3= Insulated and Heat Traced
5) Ten Thousands position – Direction of the Offline Branch Leg on Flanged Tee
Bends and Flanged Tee Elbows
0 or blank= No Direction set
1= Branch Leg in line with Main Line ‘In’ leg
2= Branch Leg in line with Main Line ‘Out’ leg
TS Rowe
21 November 2002
- 34 -