Duracast™ Fiberglass Columns W hile timeless beauty and elegance come standard with all Dixie-Pacific™, for extreme durability, minimal maintenance, and designs for both interior and exterior applications, DuraCast™ Fiberglass Columns are exactly what you’ve been looking for. DuraCast™ Columns are designed for all types of decorative and load-bearing installations. They are manufactured from highly advanced fiberglass reinforced polymers (FRP), which makes them very durable – all components are insect-, weather- and decay-resistant, and carry a limited lifetime warranty. With architecturally correct proportions and projections, DuraCast™ Columns are available in a range of styles to fit any project. Each must pass quality control inspections before it is shipped – making sure that each represents the unmistakable Dixie craftsmanship. Choosing the Right DuraCast™ Column 1. Choose the column style: round, square, tapered or nontapered, plain or fluted 2. Choose the appropriate column size. See Smart Size Ordering information on page 3 to determine the correct size for your application 3. Select the appropriate cap and base/plinth, DuraCast™ Column Features: • Round or Square • Architecturally Correct Proportions • Plain or Fluted Shaft • Durable • Low Maintenance • Decay Resistant • Load Bearing • Decorative Capitals Available • Limited Lifetime Warranty and determine if you want a beautifully detailed Decorative Capital DuraCast™ Fiberglass Column Styles Round Tapered (Plain or Fluted) [4] Round Tapered Knee-Wall (Plain or Fluted) Round NonTapered (Plain or Fluted) Round NonTapered Knee-Wall (Plain or Fluted) Round Barrel www.dixiepacific.com Square Tapered Square Tapered Knee-Wall 1.800.468.5993 Caps & Base/Plinths for DuraCast™ Columns Tuscan Cap & Base/Plinth Roman Doric Cap & Base/Plinth Colony Cap & Base/Plinth Attic Base/Plinth Decorative Capitals for DuraCast™ Columns See Pages 8-9 for details Angular Greek Ionic Angular Greek Ionic w/ Necking Decorative Roman Doric Empire Empire w/ Necking Greek Erectheum Greek Erectheum w/ Necking Roman Ionic Scamozzi Modern Composite Roman Corinthian Temple of Winds Fiberglass Column Installation Kit Use during installation to secure column shaft in place. Each Kit Includes: (4) Brackets (2 top; 2 bottom) (10) 2” Stainless Screws (10) Tapcon Screws Fiberglass Column Reassembly Split Kit Each Kit Includes: Straps Tube(s) of Adhesive Aluminum Plates #8 11/4 “ Screws Instruction Sheet for 6” to 36” Columns Plan Types for Split DuraCast™ Columns A E B F 1.800.468.5993 C G D H Q K www.dixiepacific.com DuraCast™ Fiberglass Columns [5] DuraCast™ Round Tapered Columns Measurements in inches unless otherwise noted. There may be a variance of up to 1/4” in all dimensions. DuraCast™ Round Tapered Columns Custom flutes available Full Length & Knee-Wall Bottom Neck Shaft Column Shaft Diameter Diameter Size A B 55/8 5 6” 75/8 61/2 8” 95/8 81/4 10” 115/8 911/16 12” 135/8 115/8 14” 3/ 15 4 135/8 16” 171/2 153/8 18” 191/2 173/16 20” 215/8 191/4 22” 5/ 23 8 211/4 24” 26” 28” 30” 36” 26 28 295/8 36 22 231/2 261/2 30 Bead K 1 1 1 1 /8 7 1 11/8 17/16 17/8 23/16 2 21/8 31/16 2 Flute Width L 5/ 16 11/ 16 7/ 8 1 1 11/4 13/8 13/8 13/4 13/4 2 2 2 21/2 Top Flute M 1 1 1 1 1 11/4 11/4 11/4 11/4 11/4 11/4 11/4 11/4 11/4 Bottom Flute N 103/4 103/4 103/4 103/4 103/4 103/4 103/4 103/4 103/4 103/4 103/4 103/4 103/4 103/4 No. Flutes 16 24 24 24 24 24 24 24 24 24 24 24 24 24 LoadBearing Minimum Capacity* Wall (in lbs.) Thickness 8,000 10,000 14,000 18,000 20,000 20,000 20,000 20,000 20,000 20,000 20,000 20,000 20,000 20,000 /8 /8 3/ 8 3/ 8 1/ 2 1/ 2 1/ 2 1/ 2 5/ 8 5/ 8 5/ 8 5/ 8 5/ 8 11/4 Cut at Bead Loss 3 31/2 3 4 5 53/4 7 8 87/8 9 101/4 115/16 117/8 113/4 147/8 135/8 Length (in feet) 8 5’ 6”, 6, 8, 9, 10 5’ 6”, 6, 8, 9, 10, 12 8, 9, 10, 12, 14, 16, 18 8, 9, 10, 12, 14, 16, 18 8, 10, 12, 14, 16, 18, 20 10, 12, 14, 16, 18, 20, 22, 24, 26 12, 14, 16, 18, 20, 22, 24 16, 18, 20, 22, 24, 26 14, 16, 18, 20, 22, 24, 26, 28, 30 20, 22, 24, 26 20, 22, 24, 26, 28 20, 22, 24, 26, 28, 30 20, 22, 24, 26, 28, 30 * Load-bearing capacity is dependent on the concentric loading of the column. NOTE: • All DuraCast™ fluted columns have adjustable flutes which can be altered. • Custom sizes are available. Contact Dixie-Pacific™ for more information. Columns to Surround Structural Supports for DuraCast™ Round Tapered Columns Full Length & Knee-Wall Inside Column Top Shaft Diameter Size P 6” 33/4 8” 51/2 10” 71/4 12” 811/16 14” 107/8 16” 127/8 18” 143/8 20” 165/8 22” 181/4 24” 201/4 26” 21 28” 22 30” 251/4 36” 28 Top View Inside Diameter NOTE: • Inside diameter may vary up to 1/8”. These columns allow for saw kerf as columns are split. Columns that are split are non-load-bearing. Splitting a column will decrease inside dimension 1/8”. • Specify shape and size of structural support [6] DuraCast™ Fiberglass Columns Round Non-Tapered Column www.dixiepacific.com 1.800.468.5993 DuraCast™ Round Tapered Caps & Base/Plinths Measurements in inches unless otherwise noted. There may be a variance of up to 1/4” in all dimensions. NOTE: • Tuscan Cap and Base/Plinth are standard components for DuraCast™ Columns. • All Caps and Base/Plinths are non-vented. • All Caps and Base/Plinths are sold separately from the column. Tuscan Cap & Base/Plinth Roman Doric Cap & Base/Plinth Full Length & Knee-Wall Column Size 6” * 8” ** 10” ** 12” ** 14” * 16” * 18” * 20” * 22” * 24” * 26” *** 28” *** 30” * 36” *** Plinth Width C 9 101/2 131/8 161/2 191/2 221/8 245/8 27 301/4 331/2 35 38 411/8 483/4 Height D 17/16 17/8 23/8 27/8 33/8 4 4 43/4 53/8 57/8 61/4 63/4 61/2 83/4 Base Mold E 17/8 21/2 27/8 31/4 41/4 45/8 55/8 61/2 67/8 77/16 83/8 83/4 83/8 113/8 Full Length & Knee-Wall Cap Square Width Height F G 71/2 1 91/2 13/8 1115/16 17/8 143/8 21/8 17 27/8 193/4 3 223/8 31/8 2415/16 33/8 1/ 27 2 33/4 301/2 41/16 311/2 43/8 333/8 43/4 1/ 38 4 45/8 423/4 61/4 Cap Round H 5/ 8 11/8 11/4 11/2 2 21/4 23/4 27/8 3 31/2 3 31/4 4 41/4 NOTE: • It is not recommended to split Synthetic Injection Molded (SIM) Cap and Base/Plinth sets for reassembly. • Tuscan (SIM) Cap and Base/Plinth components can only be purchased as a set. • Tuscan cast fiberglass Base/Plinths are available for 8”-14”. Colony Cap & Base/Plinth Full Length & Knee-Wall Column Size 6” * 8” ** 10” ** 12” * Plinth Width C 71/4 93/4 113/4 131/8 Height D 13/8 11/4 13/8 11/2 Base Mold E 11/2 11/2 11/2 11/2 Cap Square Width F 71/2 91/2 111/2 13 Height G 1 13/8 17/16 11/2 Cap Round H 5/ 8 11/8 11/8 11/8 NOTE: • It is not recommended to split Synthetic Injection Molded (SIM) Cap and Base/Plinth sets for reassembly. • Colony (SIM) Cap and Base/Plinth components can only be purchased as a set. 1.800.468.5993 www.dixiepacific.com Column Size 6” * 8” * 10” * 12” * 14” * 16” * 18” * 20” *** 22” *** 24” *** 26” *** 28” *** 30” *** 36” *** Plinth Width C 81/2 103/8 1215/16 151/2 181/8 207/8 231/4 27 293/4 321/2 35 38 401/2 483/4 Attic Base/Plinth Height D 11/2 17/8 23/8 27/8 315/16 33/4 4 43/4 51/4 53/4 61/4 63/4 71/4 83/4 Base Mold E 13/4 21/2 33/16 37/8 47/16 51/4 6 61/4 63/4 71/2 81/8 85/8 93/8 111/4 Cap Square Width F 8 93/4 121/2 143/4 171/2 201/2 231/8 25 273/8 293/4 321/2 345/8 37 441/8 Cap Round H 7/ 8 11/8 13/8 15/8 113/16 19/16 13/4 23/4 3 31/4 31/2 37/8 41/8 5 Height G 11/8 11/2 13/4 23/8 23/8 23/4 3 4 43/8 41/2 51/8 51/2 57/8 7 Full Length & Knee-Wall Column Size 6” * 8” * 10” * 12” * 14” * 16” * 18” * 20” * 22” * 24” * 26” *** 28” *** 30” * 36” *** Plinth Width C 85/16 101/8 13 161/8 191/4 213/4 25 275/8 301/4 331/2 35 38 411/4 483/4 Height D 13/8 17/8 21/2 3 33/8 4 43/8 51/8 53/8 6 61/4 63/4 61/2 83/4 Base Mold E 23/4 31/4 37/8 41/2 53/8 61/2 71/4 81/2 91/4 101/4 105/8 113/8 111/4 143/4 * Manufactured from polyurethane. ** Manufactured from polyurethane or Synthetic Injection Molded (SIM). *** Manufactured from fiberglass. DuraCast™ Fiberglass Columns [7] Decorative Capitals for DuraCast™ Round Tapered Columns Measurements in inches unless otherwise noted. There may be a variance of up to 1/4” in all dimensions. NOTE: • 8” - 12” Decorative Capitals are load bearing (unless split) and manufactured from lightweight polyurethane. • 14” - 30” Decorative Capitals are non-load bearing (requires plug) and manufactured from lightweight polyurethane. • Specify shape and size of structural support if Decorative Capitals are split for reassembly. The inside diameter of the Decorative Capital is significantly smaller than the inside top diameter of the column shaft. • All Decorative Capitals are sold separately from the column. *All dimensions are approximate. **Necking detail may vary. Angular Greek Ionic with Necking** Angular Greek Ionic Column Size 6” 10” 12” 14” 18” 20” Dimensions* Diameter 51/2 81/2 101/2 121/2 16 181/4 Height 33/8 51/2 61/8 71/4 10 111/4 Abacus 73/4 141/2 171/4 201/2 241/8 30 6” 10” 12” 16” 18” 20” 24” [8] 6” 8” 10” 12” 22” Dimensions* Diameter 51/2 65/8 81/2 101/2 181/4 Height 63/4 73/4 10 113/8 171/4 Abacus 73/4 91/4 141/2 171/4 30 Empire with Necking** Empire Column Size Column Size Decorative Roman Doric Dimensions* Diameter 51/2 93/8 11 135/8 161/2 181/2 22 Height 31/2 51/2 61/2 81/8 10 111/2 131/8 Abacus 91/2 141/8 181/4 211/4 32 323/4 36 Column Size 6” 8” 10” 12” 16” 20” 24” 51/2 63/4 81/2 101/4 135/8 161/2 20 DuraCast™ Fiberglass Columns Height 7 8 103/8 111/4 171/4 171/2 191/8 Diameter 8” 10” 12” 6 81/4 10 Height 47/8 63/8 71/2 Abacus 105/8 14 161/4 Greek Erectheum Dimensions* Diameter Dimensions* Column Size Abacus 91/2 101/2 131/4 173/4 211/4 32 33 Dimensions* Column Size Diameter 8” 10” 12” 14” 16” 18” 20” 24” 7 9 103/4 123/4 141/2 161/2 18 22 www.dixiepacific.com Height 41/2 55/8 61/2 7 85/8 10 111/8 131/8 Abacus 93/8 131/8 141/4 161/4 18 211/4 261/4 31 1.800.468.5993 Decorative Capitals for DuraCast™ Round Tapered Columns Cutting Columns at Bead/Astragal All DuraCast™ Round Tapered Fiberglass Columns used with Decorative Capitals should be cut flush above the bead. Greek Erectheum with Necking** The Decorative Capital should rest on the top of the bead to allow for the proper fit on the column. The cut at bead loss and the Decorative Capital height must be taken into consideration when ordering columns. A column used with a short Decorative Capital may require a longer shaft. Modern Composite Dimensions* Column Size Diameter Height Abacus 8” 10” 12” 16” 18” 20” 24” 61/2 83/8 10 123/4 141/2 18 20 5 5 /8 81/4 91/2 101/2 127/8 165/8 171/8 7 /2 101/2 141/4 161/4 18 261/4 27 1 Roman Ionic Roman Corinthian Dimensions* Column Size Diameter Height 6” 10” 12” 14” 16” 53/4 81/2 101/2 12 14 81/2 111/2 141/2 17 181/2 Abacus 103/4 161/4 19 193/4 203/4 Scamozzi Dimensions* Column Size Diameter Height 6” 8” 10” 12” 14” 16” 18” 20” 22” 24” 61/4 71/2 9 103/8 12 14 16 181/2 201/2 201/2 25/8 31/2 41/4 41/2 5 63/8 61/2 9 91/2 91/2 1.800.468.5993 Abacus 71/2 91/2 111/2 123/4 161/2 171/4 211/4 25 251/8 251/8 Dimensions* Column Size Diameter Height Abacus 6” 8” 10” 12” 14” 16” 18” 20” 22” 24” 28” 30” 51/4 7 81/2 95/8 11 127/8 15 171/4 181/2 20 25 26 71/4 83/4 113/8 14 151/8 171/8 173/4 251/4 281/2 281/2 34 36 10 121/4 15 193/4 193/4 221/2 251/4 39 41 42 46 48 Temple of Winds Dimensions* Column Size Diameter Height 6” 8” 10” 12” 14” 16” 18” 20” 22” 24” 28” 30” 53/4 71/2 9 11 12 14 16 173/4 20 22 25 26 27/8 35/8 41/4 51/8 55/8 71/2 71/2 81/2 91/4 105/8 123/4 151/4 www.dixiepacific.com Abacus 81/2 131/2 141/2 161/2 183/4 22 243/4 281/2 301/2 321/4 381/2 461/4 Dimensions* Column Size Diameter Height 6” 8” 10” 12” 14” 16” 18” 20” 22” 24” 28” 53/4 61/2 9 103/8 111/2 14 15 18 191/4 191/2 24 7 73/4 111/4 111/2 14 17 185/8 211/2 241/8 23 261/8 DuraCast™ Fiberglass Columns Abacus 83/4 101/2 151/4 17 211/2 231/4 27 273/4 35 353/4 371/4 [9] DuraCast™ Round Non-Tapered Columns Measurements in inches unless otherwise noted. There may be a variance of up to 1/4” in all dimensions. DuraCast™ Round Non-Tapered Columns Custom flutes available Full Length & Knee-Wall LoadBearing Minimum Bottom Neck Wall Column Shaft Flute Top Bottom No. Capacity* Bead Shaft Size Diameter Diameter (Applied) Width Flute Flute Flutes (in lbs.) Thickness N M A L K B 8” 10” 12” 14” 16” 18” 24” 75/8 95/8 115/8 135/8 153/4 171/2 24 75/8 95/8 115/8 135/8 153/4 171/2 24 1 1 1 7/ 8 1 11/8 13/4 /16 /8 1 1 11/4 13/8 13/4 11 7 1 1 1 1 11/4 11/4 11/4 103/4 103/4 103/4 103/4 103/4 103/4 103/4 10,000 14,000 18,000 20,000 20,000 20,000 20,000 24 24 24 24 24 24 24 /8 /8 3/ 8 1/ 2 1/ 2 1/ 2 5/ 8 3 Length (in feet) 6, 8, 9, 10 6, 8, 9, 10, 12 6, 8, 9, 10, 12 6, 8, 9, 10, 12, 14 6, 8, 9, 10, 12, 14, 16, 18, 20 6, 8, 9, 10, 12, 14, 16, 18, 20 6, 8, 9, 10, 12, 14, 16, 18, 20 3 * Load-bearing capacity is dependent on the concentric loading of the column. NOTE: • All DuraCast™ fluted columns have adjustable flutes which can be altered. • Beads are sold separately. • Custom sizes are available. Contact Dixie-Pacific™ for more information. Round Non-Tapered Fluted Column Columns to Surround Structural Supports for DuraCast™ Round Non-Tapered Columns Full Length & Knee-Wall Inside Column Top Shaft Size Diameter P 8” 67/8 10” 87/8 12” 107/8 14” 127/8 16” 15 18” 163/8 24” 21 Top View Inside Diameter NOTE: • Inside diameter may vary up to 1/ 8”. These columns allow for saw kerf as columns are split. Columns that are split are non-load-bearing. Splitting a column will decrease inside dimension 1/8”. • Specify shape and size of structural support. Round Non-Tapered Column Tuscan Cap & Base/Plinth for DuraCast™ Round Non-Tapered Columns Full Length & Knee-Wall Bead is adjustable and is applied in the field. Plinth Column Size Width C D 8” * 10” * 12” * 14” * 16” * 18” * 24” * 101/2 131/8 161/2 191/2 221/8 245/8 331/2 17/8 23/8 27/8 33/8 4 4 57/8 Height Base Mold E 21/2 27/8 31/4 41/4 45/8 55/8 77/16 Cap Square Width F 105/8 1213/16 157/8 191/8 22 245/8 333/8 Height G 11/2 13/4 21/4 27/8 3 31/8 43/4 Cap Round H 11/4 11/4 13/4 2 21/4 23/4 31/4 * Manufactured from polyurethane. NOTE: • Tuscan Cap and Base/Plinth are the standard components for DuraCast™ Columns. • All Caps and Base/Plinths are non-vented. • All Caps and Base/Plinths are sold separately from the column. [10] DuraCast™ Fiberglass Columns www.dixiepacific.com 1.800.468.5993 DuraCast™ Round Barrel Columns Measurements in inches unless otherwise noted. There may be a variance of up to 1/4” in all dimensions. DuraCast™ Round Barrel Columns Full Length Bottom Neck Middle Column Shaft Shaft Shaft Size Diameter Diameter Diameter A B 10” 93/16 101/8 12 Bead K LoadBearing Minimum Length Capacity* Wall (in lbs.) Thickness (in feet) 10,000 1 1 3/8 8, 10 * Load-bearing capacity is dependent on the concentric loading of the column. NOTE: • Second story balconies should not be attached directly to the side of any DuraCast™ Round Barrel column, contact Dixie-Pacific™ for recommendations. • Custom sizes are available. Contact Dixie-Pacific™ for more information. Round Barrel Column Columns to Surround Structural Supports for DuraCast™ Round Barrel Columns Full Length Top View Inside Column Top Shaft Diameter Size P 71/2 10” Inside Diameter NOTE: • Inside diameter may vary up to 1/8”. These columns allow for saw kerf as columns are split. Columns that are split are non-load-bearing. Splitting a column will decrease inside dimension 1/ 8”. • Specify shape and size of structural support. RoundCap Barrel Tuscan & Base/Plinth Column ™ Round Barrel Columns for DuraCast Full Length Column Size 10” * Plinth Width C 123/4 Height D 21/2 Base Mold E 3 Cap Square Width F 143/4 Height G 21/4 Cap Round H 11/2 * Manufactured from polyurethane. NOTE: • Tuscan Cap and Base/Plinth are the standard components for DuraCast™ Columns. • All Caps and Base/Plinths are non-vented. • All Caps and Base/Plinths are sold separately from the column. 1.800.468.5993 www.dixiepacific.com DuraCast™ Fiberglass Columns [11] DuraCast™ Square Tapered Columns Measurements in inches unless otherwise noted. There may be a variance of up to 1/4” in all dimensions. DuraCast™ Square Tapered Columns Full Length & Knee-Wall Column Size Bottom Shaft Width A Top Shaft Width B 10” 101/4” 12” 14” 16” 10 101/4 12 14 16 51/2 71/2 10 12 9 LoadBearing Minimum Bead Capacity* Wall (Applied) (in lbs.) Thickness K 10,000 10,000 14,000 14,000 14,000 1 1 1 1 1 13/8 1 3/8 1 3/8 1 3/8 1 3/8 Length (in feet) 5’6” 7 6, 10** 9** 4’10”, 6, 8 * Load-bearing capacity is dependent on the concentric loading of the column. ** 12” x 10” x 10’ and 14” x 12” x 9’ have a one-third to two-third taper. Trimming more than one-third from the bottom will result in bases not fitting properly. NOTE: • Second story balconies should not be attached directly to the side of any DuraCast™ Square column, contact Dixie-Pacific™ for recommendations. • Bead is shipped with shaft and applied in the field. • Custom sizes are available. Contact Dixie-Pacific™ for more information. Columns to Surround Structural Supports for DuraCast™ Square Tapered Columns Full Length & Knee-Wall Inside Column Top Shaft Width Size P 41/2 10” 41/2 101/4” 9 12” 8 14” 8 16” Bead is adjustable and is applied in the field. Top View Inside Width NOTE: • Inside width may vary up to 1/8”. These columns allow for saw kerf as columns are split. Columns that are split are non-load-bearing. 1/ Splitting a column will decrease inside dimension 8”.Tapered Square • Specify shape and size of structural support. Tuscan Cap & Base/Plinth for DuraCast™ Square Tapered Columns Full Length & Knee-Wall Column Size 10”* 10 1/4”* 12”* 14”* 16” x 4’ 10”* 16” x 6’ & 16” x 8’* Plinth Width C 13 131/2 169/16 183/4 183/4 191/16 Height D 21/2 23/8 21/2 33/8 21/2 21/2 Base Mold E 37/16 3 39/16 4 39/16 39/16 Cap Square Width Height F G 95/8 13/8 101/4 1 123/4 13/8 171/8 23/8 131/4 13/8 131/4 13/8 Cap Round H 13/8 1 13/8 15/8 13/8 13/8 * Manufactured from polyurethane. NOTE: • Tuscan Cap and Base/Plinth are the standard components for DuraCast™ Columns. • All Caps and Base/Plinths are non-vented. • All Caps and Base/Plinths are sold separately from the column. [12] DuraCast™ Fiberglass Columns www.dixiepacific.com 1.800.468.5993 DuraSquare Cast™ Columns Columns DuraCast 1.800.468.5993 www.dixiepacific.com DuraCast™ Fiberglass Columns [13] DuraLite™ Fiberglass Columns S ometimes, an application calls for a column with a little edge. Which is where DixiePacific’s™ DuraLite™ Square Fiberglass Columns come in. Not only do they offer strength, beauty and versatility, they are cost effective, as well. Available in a wide array of styles, they are easy to install because of their lightweight shaft and synthetic cap, bead and base/plinth. They require very little maintenance, are extremely durable and are load bearing. Choosing the Right DuraLite™ Column 1. Choose the column style: plain, fluted or recessed panel 2. Choose the appropriate column size. See Smart Size Ordering information on page 3 to determine the correct size for your application 3. Select the appropriate cap and base/plinth, and determine if you want a beautifully detailed Decorative Capital Choose from a plain shaft, fluted shaft or three styles of recessed panels – a single panel, two-panel or three-panel option. Any of the DuraLite™ styles offer traditional elegance and an intriguing artistic touch. Because these columns are can be trimmed to any height, they offer maximum flexibility – easily adapted for pedestal applications or room dividers. DuraLite™ Column Features: • Square • Plain, Fluted or Recessed Panel Designs • Lightweight • Low Maintenance • Can be Trimmed to Any Height • Durable • Decay Resistant • Load Bearing • Decorative Capitals Available • Limited Lifetime Warranty DuraLite™ Fiberglass Column Styles Square Non-Tapered Plain [14] Square Non-Tapered Knee-Wall Plain Square Square Non-Tapered Non-Tapered Knee-Wall Fluted Fluted Square Non-Tapered Recessed Panel (1) Square Non-Tapered Knee-Wall Recessed Panel (1) www.dixiepacific.com Square Square Non-Tapered Non-Tapered Recessed Recessed Panel (2) Panel (3) 1.800.468.5993 Caps & Base/Plinths for DuraLite™ Columns Tuscan Cap & Base/Plinth Colony Cap & Base/Plinth Attic Base/Plinth Craftsman Base Decorative Capitals for DuraLite™ Columns See Page 19 for details Angular Greek Ionic Empire Greek Erectheum Roman Ionic Scamozzi Roman Corinthian Temple of Winds Fiberglass Column Installation Kit Use during installation to secure column shaft in place. Each Kit Includes: (4) Brackets (2 top; 2 bottom) (10) 2” Stainless Screws (10) Tapcon Screws Fiberglass Column Reassembly Split Kit Each Kit Includes: Straps Tube(s) of Adhesive Aluminum Plates #8 11/4 “ Screws Instruction Sheet for 6” to 12” Columns Plan Types for Split DuraLite™ Columns E F 1.800.468.5993 G H K www.dixiepacific.com DuraLite™ Fiberglass Columns [15] DuraLite™ Square Non-Tapered Columns Measurements in inches unless otherwise noted. There may be a variance of up to 1/8” in all dimensions. DuraLite™ Square Non-Tapered Columns Full Length & Knee-Wall (Plain) Column Size 6” 8” 10” 12” Bottom Shaft Width A 51/2 71/2 91/2 111/2 Neck Shaft Width B 51/2 71/2 91/2 111/2 LoadBearing Minimum Bead Capacity* Wall Length (Applied) (in lbs.) Thickness (in feet) K 1/ 5,000 1 6, 8, 9,10 8 1 /8 6,500 1 6, 8, 9, 10, 12 1/ 7,000 1 6, 8, 9, 10, 12 8 1/ 7,500 1 6, 8, 9, 10, 12 8 Full Length & Knee-Wall (Fluted) Top Bottom Neck Total Column Shaft Flute Flute Bead Shaft Size Width Width (Applied) Width** Insert M A L K B 8” 8 71/2 51/16 1 71/2 10” 9 91/2 55/8 1 91/2 K M B L Bottom Flute Insert N Total No. Flutes No. Flutes per Face 8 9 28 28 7 7 LoadBearing Minimum Capacity* Wall (in lbs.) Thickness 6,500 7,000 /8 /8 1 1 Length (in feet) 6, 8, 9, 10, 12 6, 8, 9, 10, 12 * Load-bearing capacity is dependent on the concentric loading of the column. **Total flute width includes the total width of all seven flutes. NOTE: •Second story balconies cannot be attached directly to the side of any DuraLite™ Square column, contact Dixie-Pacific™ for recommendations. •Bead is shipped with shaft and applied in the field. •Each DuraLite™ fluted column will include four top flute insert pieces and four bottom flute insert pieces. Columns to Surround Structural Supports for DuraLite™ Square Non-Tapered Columns A N Full Length & Knee-Wall Inside Top View Column Top Shaft Width Size P Plain 6” 8” 10” 12” 51/4 71/4 91/4 111/4 8” 10” 57/8 73/4 Fluted Bead is adjustable and is applied in the field. [16] DuraLite™ Fiberglass Columns Inside Width Inside Width NOTE: • Inside width may vary up to 1/8”. These columns allow for saw Square Non-Tapered kerf as columns are split. Columns that are split are non-loadbearing. Splitting a column will decrease inside dimension 1/8”. • Specify shape and size of structural support. www.dixiepacific.com 1.800.468.5993 DuraLite™ Square Non-Tapered Recessed Panel Columns Measurements in inches unless otherwise noted. There may be a variance of up to 1/8” in all dimensions. DuraLite™ Square Non-Tapered Recessed Panel Columns Full Length & Knee-Wall Bottom Neck Column Shaft Shaft Bead Panel Width Width (Applied) Width Size A B L K 71/2 8” 71/2 47/8 1 91/2 10” 91/2 55/16 1 Top Insert M 8 9 LoadBearing Minimum Wall Bottom Capacity* Length Insert (in feet) (in lbs.) Thickness N 1/ 6, 8, 9, 10, 12 8 6,500 8 1/ 6, 8, 9, 10, 12 9 7,000 8 * Load-bearing capacity is dependent on the concentric loading of the column. NOTE: •Second story balconies cannot be attached directly to the side of any DuraLite™ Square column, contact Dixie-Pacific™ for recommendations. •Bead is shipped with shaft and applied in the field. •Each DuraLite™ Recessed Panel column will include four top panel insert pieces and four bottom panel insert pieces. DuraLite™ Panel Divider Kits to convert a single panel Column into a 2- or 3-panel Column Kit Size Width Height 8” Panel Divider Kit (4 pieces) 47/8 21/4 10” Panel Divider Kit (4 pieces) 55/16 37/8 Panel Insert Kit Panel Insert Kit Full Length & Knee-Wall Bead is adjustable and is applied in the field. NOTE: • Each Panel Divider Kit includes four pieces. One Panel Divider Kit is needed to achieve a 2-panel column and Two Panel Divider Kits are needed to achieve a 3-panel column. • Panel Divider Kits are sold separately from the column. Panel Divider Kits (Sold Separately) 1 Panel 2 Panel 3 Panel Columns to Surround Structural Supports for DuraLite™ Square Recessed Panel Columns P Full Length & Knee-Wall Inside Column Top Shaft Width Size P 53/4 8” 10” Inside Width 8 NOTE: • Inside width may vary up to 1/8”. These columns allow for saw kerf as columns are split. Columns that are split are non-load-bearing. Splitting a column will decrease inside dimension 1/8”. • Specify shape and size of structural support. 1.800.468.5993 www.dixiepacific.com DuraLite™ Fiberglass Columns Recessed Panel Column [17] DuraLite™ Square Non-Tapered Caps & Base/Plinths Measurements in inches unless otherwise noted. There may be a variance of up to 1/4” in all dimensions. NOTE: • Tuscan Cap and Base/Plinth are standard Duralite cap, base/plinth & bead components for DuraLite™ Columns. • All Caps and Base/Plinths arebase/plinth non-vented. Duralite cap, & bead • All Caps and Base/Plinths are sold separately from the column. F G F H G H K Tuscan Cap & Base/Plinth K E E D Attic Base/Plinth D C C Full Length & Knee-Wall Column Size 6” * 8” ** 10” ** 12” * Plinth Width C 81/2 103/8 13 151/4 Height D 11/2 17/8 23/8 23/4 Base Mold E 13/4 23/8 27/8 31/4 Cap Square Width Height F G 8 11/16 101/8 13/8 123/4 13/4 7/ 15 8 2 Cap Round H 7/ 8 1 11/4 13/8 Full Length & Knee-Wall Column Size 8” * 10” * 12” * Plinth Width C 101/4 123/4 155/16 Height D 11/4 13/4 115/16 Base Mold E 31/4 41/8 47/8 Note: • It is not recommended to split Synthetic Injection Molded (SIM) Cap and Base/Plinth sets for reassembly. • Tuscan (SIM) Cap and Base/Plinth components can only be purchased as a set. Colony Cap & Base/Plinth Craftsman Base Full Length & Knee-Wall Column Size 6” * 8” * 10” * Plinth Width C 71/4 91/2 111/2 Height D 11/4 11/4 11/4 Base Mold E 11/2 11/2 11/2 Cap Square Width F 73/4 101/4 121/4 Height G 1 11/2 11/2 Cap Round H 1/ 2 11/4 11/2 Full Length & Knee-Wall Column Size 8” * 10” * Base Width C 91/4 111/4 Height D 8 8 * Manufactured from polyurethane. ** Manufactured from polyurethane or Synthetic Injection Molded (SIM). [18] DuraLite™ Fiberglass Columns www.dixiepacific.com 1.800.468.5993 Decorative Capitals for DuraLite™ Square Non-Tapered Columns Measurements in inches unless otherwise noted. There may be a variance of up to 1/4” in all dimensions. NOTE: •• Decorative Capitals are load bearing (unless split) and manufactured from lightweight polyurethane. •• Specify shape and size of structural support if Decorative Capitals are split for reassembly. The inside diameter of the Decorative Capital is significantly smaller than the inside top width of the column shaft. •• All Decorative Capitals are sold separately from the column. *All dimensions are approximate. Angular Greek Ionic Empire Roman Corinthian Dimensions* Dimensions* Column Size Width Height Abacus Column Size Width Height Abacus 12” 121/2 71/4 201/2 8” 8 51/4 131/4 Roman Ionic Dimensions* Greek Erectheum Scamozzi Dimensions* Dimensions* Column Size Width Height Abacus 8” 10” 81/2 93/4 51/4 6 11 121/4 Temple of Winds Dimensions* Dimensions* Column Size Width Height Abacus Column Size Width Height Abacus Column Size Width Height Abacus Column Size Width Height Abacus 8” 10” 12” 81/2 10 121/2 111/2 143/4 171/2 145/8 20 223/4 8” 10” 12” 71/2 101/2 12 35/8 45/8 5 91/2 13 163/4 8” 10” 12” 81/4 10 121/4 33/4 5 53/4 141/4 161/2 183/4 8” 10” 12” 81/4 101/4 111/2 10 113/8 141/4 14 17 211/2 1.800.468.5993 www.dixiepacific.com DuraLite™ Fiberglass Columns [19]
© Copyright 2024 Paperzz