FibrCeptor HTO
TM
Remove particulate and aerosolized liquids from air and gas streams that operate at high
temperature with the FibrCeptorTM HTO. Designed with high temperature coalescing media, fiber
gaskets, and steel hardware, the FibrCeptorTM HTO will perform well in process stream temperatures
as high as 450 degrees Fahrenheit. The quality of these process streams impacts emissions,
productivity, and product quality. As a part of a well designed supply system the FibrCeptorTM HTO
will ensure clean, dry air/gas to your high temperature process helping to maintain optimum
operational metrics.
End Cap / Gasket
Core
M AT E R I A L S
Inner Wrap
Coalescing
Media
Inner Support
•
•
•
•
•
•
COALESCING MEDIA.................. Unicast microglass
DRAIN LAYER................................. Fiberglass
CORE.................................................. Steel (galvanized or tin plated)
OUTER SUPPORT.......................... Steel (galvanized or tin plated)
ADHESIVES .................................... High temp polyurethane
GASKETS........................................... Garlock®
Drain Layer
Outer Support
FIBRCEPTORTM HTO CARTRIDGES ARE
AVAILABLE FOR USE IN:
• PECOFacet Vertical Gas Coalescer Housing Model 77V
• Competitor Housings of Similar Design
OIL & GAS CARTRIDGE
DEPTH MICROGLASS COALESCERS FOR
HIGH TEMPERATURE APPLICATIONS
PE R FO R M A N C E
MAX.
MAX.
TEMPERATURE
PRESSURE1
(F)
(psid)
450
100
MICRON RATING
[μm]
RECOMMENDED
NORMAL
CHANGE-OUT PRESSURE FLOW DIRECTION
(psid)
8
inside-to-outside
MAX. OIL CARRY OVER2
COALESCING EFFICIENCY
0.3
(ppm w/w)
98.5%
0.2
1. Max. Pressure may be limited by housing manufacturer’s design.
2. Tested per ISO-12500-1 at 40 ppm inlet
NOMINAL DIMENSIONS
MODEL
OD (inches)
FF-336-HTO 400
ID
4.5
(inches)
3
LENGTH
(inches)
36
N O M E N C L AT U R E
FF
336
HTO 400
©2015 PECOFacet
PECOFacet has a
policy of continuous
product research and
development and
reserves the right
to change design
and specifications
without notice.
OG-FC-TD-03
(PFMW 201506)
Garlock is a registered trademark of Garlock Family of Companies and EnPro
Industries. PECOFacet and FibrCeptor are trademarks of PECOFacet. ® indicates a
PECOFacet trademark registered in the USA and various other countries.
pecofacet.com
Refer to the website for the most current literature editions.
For inquires email: [email protected]