Angle sensor
424 D......
Measuring angle of 360° and optional second output
+ long lifetime and high reliability thanks to contact-less Hall effect technology
+ angle measuring range between 20° and 359°
+ high protection class IP67 for tough environmental conditions
+ operating temperature range -40°C to +85°C
(-40°F to +185°F)
+ 12 bit resolution
+ current or voltage output signal
+ optional second output
+ PWM output signal available as an option
+ permanent short-circuit protection
Use
The shaft is supported by plain bearing is therefore
suitable for most industrial and commercial vehicle
applications. The sensor is based on contact-less Hall effect
technology, and can be used in tough environmental
conditions thanks to its IP67 protection class.
Options
The angle measuring range can be defined between
20° and 359°. In addition, an optional second output is
available. To ensure maximum flexibility, a selection of
current or voltage outputs is available. Alternatively, a
PWM signal output is available on request.
Angle sensor with optional actuation
lever
The relevant corresponding technical documents will be supplied with the product.
Certain product descriptions can be similar therefore please ensure that you have the latest version of documentation for your
specific product prior to any use. elobau reserves the right to change technical data and documentation without notice.
elobau GmbH & CO. KG | Zeppelinstr. 44 | 88299 Leutkirch | Germany |  +49 (0) 7561 970-0  +49 (0) 7561 970-100 | www.elobau.com
424D – Version 1.3
Page 1 of 6
Mechanical assembly
0° zero position
when flat on shaft is parallel to
mounting holes axis
Pivot axle
VA (1,4305)
without cap marked
with cap marked
Mating connector
Deutsch DT06-6S
Shaft
Compatible cable set
on request
Optional actuation lever (350 210)
The relevant corresponding technical documents will be supplied with the product.
Certain product descriptions can be similar therefore please ensure that you have the latest version of documentation for your
specific product prior to any use. elobau reserves the right to change technical data and documentation without notice.
elobau GmbH & CO. KG | Zeppelinstr. 44 | 88299 Leutkirch | Germany |  +49 (0) 7561 970-0  +49 (0) 7561 970-100 | www.elobau.com
424D – Version 1.3
Page 2 of 6
Installation dimensions
Installation size
62 x 41 x 44.6 mm
Mounting
2x M4 screws (Ø4.1 mm bore holes, 32±0.2 mm distance)
Key mechanical data
Technology
Hall effect sensor technology
Operating temp. range
-40°C to +85°C (-40°F to +185°F)
Mechanical stop
without
Protection class
IP67 DIN EN 60529
Electronic functional angle
20° ... 359° (±10° ... ±179.5°)
Material
PBT
Bearing
Plain bearing
Connection
Deutsch DT06-6S connector
Key electrical data
424 D.0....
424 D.1....
424 D.7....
Operating voltage
10...30 VDC
10...30 VDC
10...30 VDC
Output signal
1...5 V (Ri=1kΩ)
4...20 mA
0.5..4.5 V (Ri=1kΩ)
Current consumption
< 30 mA
< 30 mA
< 30 mA
Load resistance
≥ 100 kΩ (received)
*
≥ 100 kΩ (received)
Center position
3 V typical
12 mA
2.5 V typical
Number of outputs
1 or 2
Signal update rate
≥ 1.6 kHz
Reverse connection
protected
yes
Resolution
12 bit
Linearity error
< ± 1% of angle value
Repeating accuracy
0.2 %
Offset temperature drift
< ± 1.2% of angle value
* at operating voltage: >15 V max. 500 Ω
< 15 V max. 200 Ω
The relevant corresponding technical documents will be supplied with the product.
Certain product descriptions can be similar therefore please ensure that you have the latest version of documentation for your
specific product prior to any use. elobau reserves the right to change technical data and documentation without notice.
elobau GmbH & CO. KG | Zeppelinstr. 44 | 88299 Leutkirch | Germany |  +49 (0) 7561 970-0  +49 (0) 7561 970-100 | www.elobau.com
424D – Version 1.3
Page 3 of 6
Wiring
Output signals diagram
output signal 1
e.g. Uout (V)
2 UB
3 Out 1
CCW rotation direction
1 0V
CW rotation direction
Angle
in degrees
output signal 2
5 UB
6 Out 2
0° corresponds 90° to
mounting axle
4 0V
CCW = counterclockwise
CW = clockwise
Connection type
Connector
3/6-pin Deutsch DT06-6S
Mating connector
Deutsch DT 06-6S
Compatible elobau cable sets
One output (3-pin)
Part no.: L1ZD.0.B
Two outputs (6-pin)
Part no.: L1FD.0.B
Compatible cable set
on request
The relevant corresponding technical documents will be supplied with the product.
Certain product descriptions can be similar therefore please ensure that you have the latest version of documentation for your
specific product prior to any use. elobau reserves the right to change technical data and documentation without notice.
elobau GmbH & CO. KG | Zeppelinstr. 44 | 88299 Leutkirch | Germany |  +49 (0) 7561 970-0  +49 (0) 7561 970-100 | www.elobau.com
424D – Version 1.3
Page 4 of 6
Fax: +49 (0) 7561 970-100
E-Mail: [email protected]
Your
product enquiry
Specifications
of your angle sensor
Quantity
Batch size
Name / first name
Company
Actuation lever
Address
B = lever installed
Postal code / town
Z = centering Ø18 without
cap
Country
without actuation lever

Angle measuring range

3 digits: value = angle
__________(e.g. 030 = 30 degrees)
E-Mail
Signal output
0 = 1...5 V
Notes, questions, other
1 = 4...20 mA
7 = 0.5...4.5 V
P = PWM (on request)
Number of outputs
1 = one output (CCW)1)
2 = two outputs (CCW)
3 = one output (CW)2)
4 = two outputs (CW)
5 = two outputs (opposite)
counterclockwise
2)
clockwise
1)
Cable set
One output (3-pin), part no.: L1ZD.0.B
Two outputs (6-pin), part no.: L1FD.0.B
________ m (1 - 10m in 1m steps)
PVC (gray)
PUR (black)
The relevant corresponding technical documents will be supplied with the product.
Certain product descriptions can be similar therefore please ensure that you have the latest version of documentation for your
specific product prior to any use. elobau reserves the right to change technical data and documentation without notice.
elobau GmbH & CO. KG | Zeppelinstr. 44 | 88299 Leutkirch | Germany |  +49 (0) 7561 970-0  +49 (0) 7561 970-100 | www.elobau.com
424D – Version 1.3
Page 5 of 6
Fax: +49 (0) 7561 970-100
E-Mail: [email protected]
Your product enquiry
Quantity
Batch size
Name / first name
Company
Address
Postal code / town
Country


E-Mail
Notes, questions, other
The relevant corresponding technical documents will be supplied with the product.
Certain product descriptions can be similar therefore please ensure that you have the latest version of documentation for your
specific product prior to any use. elobau reserves the right to change technical data and documentation without notice.
elobau GmbH & CO. KG | Zeppelinstr. 44 | 88299 Leutkirch | Germany |  +49 (0) 7561 970-0  +49 (0) 7561 970-100 | www.elobau.com
424D – Version 1.3
Page 6 of 6