BALLSLIDE SERIES 8
Batten System Selector
Hull Make
Model
Builder
Feature
16m (53ft)*
18m (60ft)**
11m (36ft)*
Max. Multihull
13m (43ft)**
Max. Monohull
Hull LOA
*Maximum limits using shortest Headboard car and Batten cars.
Mast details (if known)
53m2 (570ft2)*
60m2 (646ft2)**
42m2 (452ft2)*
Max. Multihull
48m2 (517ft2)**
Max. Monohull
Sail Area
**Maximum limits using longest Headboard car and Batten cars.
Mainsail details
Spar Manufacturer
Luff Length (P)
Mast Type
Foot Length (E)
Profile No.
Qty. Full Length Battens
NOTE: Check that the hull and spar details are correct for your boat. The mast make may vary depending on the year the boat was built. Ronstan recommends you discuss the batten receptacle and quantity requirements with your sail maker.
For luff groove openings greater than 12mm (1/2").
Feet not supplied with cars.
Feet sold in pairs.
Fasteners included.
See website www.ronstan.com for mast compatibility tables.
RC20130
RC20131
RC20132
RC20133
RC20134
HEADBOARD PLATES
(Pair)
HEADBOARD CAR
Feet required for cars;
RC284xx
Qty
Pairs
Qty
Pairs
Qty
Pairs
Qty
Pairs
Qty
Pairs
2 pairs of feet required
per headboard car
4 pairs of feet required
per headboard car
INTERMEDIATE CAR
1 pair of feet
required per car
Feet supplied with cars;
RC281xx
For luff groove openings of approximately 4.5mm (3/16").
See website www.ronstan.com for mast compatibility tables.
RC28160*
Qty
RC28460*
Qty
RC28161**
Qty
RC28461**
Qty
L=290mm (11 7/16")
RC28163
Qty
RC28463
Qty
L=76mm (3")
Typically 6 per system
RC28166
Qty
RC28466
Qty
L=92mm (3 5/8")
Typically 5 per system
*1 Select either a standard OR
quick release batten car option
QUICK RELEASE
BATTEN CAR*1
1 pair of feet
required per car
END STOP
Qty
L=214mm (8 7/16")
BATTEN CAR*1
1 pair of feet
required per car
RC00010
RC28169
Qty
RC28469
Qty
L=105mm (4 1/8")
Typically 5 per system
END STOP
RC28181
L=54mm (2 1/8")
Qty
BATTEN RECEPTACLE LINKS
RC00161
Qty
RC00152
Qty
RC001R2
Qty
RC00111
Qty
QUICK RELEASE
BATTEN RECEPTACLE LINKS
RC00261
Qty
RC00252
Qty
RC002R1
Qty
RC00211
Qty