YOUR #1 CHOICE FOR COMPRESSED GAS CYLINDER COMPONENTS
American Cap Company is one of the world’s largest manufacturers of compressed gas cylinder components.
For more than 20 years, we have provided cylinder caps, collars and other components for industrial gas, LP gas and
specialized gas cylinders. We serve customers throughout North America, South America, Europe and the Far East.
SAFETY- SNAP CAP
PRODUCT USE:
Safety and security are hallmarks of the products we
produce. The Safety Snap Cap was designed for safety
and valve access security. This design affords easy
access to the valve handle without having to remove the
protective cap and replacing the regulators each time
access to the cylinder is needed. This cap provides
safety and security for the valve with the regulator
attached. Once the cap is mounted to the cylinder and
the regulator is attached, unauthorized access to the
valve handle can be achieved by locking the cap into
position. For day to day usage of the cylinder, the lock is
removed, and the cap is opened for access to the valve
handle.
KEY FEATURES:
·
Limits Access to Hazardous Gases
·
Available for Oxygen and Acetylene Cylinders
·
Meets ISO 11117, DOT 49 CFR, CSA B340, CGA V‐9
and EN 962 Standards
PART NUMBERS
PART NUMBER
SC8FNNP‐12
SC8CNNP‐12
SC2FNNP‐12
SC2CNNP‐12
DESCRIPTION
HIGH PRESSURE 3.125 X 11 UN FINE
TREAD, SAFETY YELLOW
HIGH PRESSURE 3.125 X 7 UN
COARSE TREAD, SAFETY YELLOW
LOW PRESSURE 3.5 X 11 UN FINE
TREAD, SAFETY YELLOW
LOW PRESSURE 3.5 X 8 UN COARSE
TREAD, SAFETY YELLOW
OPTIONS:
The Safety‐Snap Cap comes with a standard finish of
safety yellow, but we also offer any custom color.
The Snap Cap can also be lettered for identification
purposes.