SYSTEM S3
PLUG-N-PLAY KITS
With D900 Dispenser
3818830 Wireless Remote Kit with English Sign ~:
Includes:
Two-Digit INR902 Indicator (RF ready): C
Plug-In Power Supply (16-1/2’ output cable): A
Two +/- RFv2 Remotes with Velcro strip set
D900 Ticket Dispenser, red & gray: D
Counter Stand for Dispenser (1’ high)
Take-A-Number Sign for Dispenser, English
3818840 Wireless Remote Kit with Spanish Sign
Includes:
Two-Digit INR902 Indicator (RF ready): C
Plug-In Power Supply (16-1/2’ output cable): A
Two +/- RFv2 Remotes with Velcro strip set
D900 Ticket Dispenser, red & gray: D
Counter Stand for Dispenser (1’ high)
Take-A-Number Sign for Dispenser, Spanish
3813830 Hard Wired (Plug-In) Kit with English Sign
Includes:
Two-Digit INR902 Indicator: C
Plug-In Power Supply (16-1/2’ output cable): A
Plug-In Push Button, Plus (+) with 33’ cable
Plug-In Push Button, Minus (-) with 33’ cable
D900 Ticket Dispenser, red & gray: D
Counter Stand for Dispenser (1’ high)
Take-A-Number Sign for Dispenser, English
3813840 Hard Wired (Plug-In) Kit with Spanish Sign
Includes:
Two-Digit INR902 Indicator: C
Plug-In Power Supply (16-1/2’ output cable): A
Plug-In Push Button, Plus (+) with 33’ cable
Plug-In Push Button, Minus (-) with 33’ cable
D900 Ticket Dispenser, red & gray: D
Counter Stand for Dispenser (1’ high)
♦ Take-A-Number Sign for Dispenser, Spanish
Optional Accessories:
100005010 Standard Floor Stand:
For mounting Ticket Dispenser and “Take-A-Number” sign
Chrome Pole with Black Metal Base 51” high
3809025 Additional Wireless Remote:
Includes:
Wireless (RFv2) Remote on key chain with adhesive-backed Velcro strip set for optionally affixing Remote
Note:
Maximum of 15 Wireless Remotes per S3 System. Wireless Remote codes must be copied into the RF
receiver on the MASTER indicator
Remote uses one Alkaline MN21, 12v,Duracell Battery, or equivalent
Works with existing INR902 and INR903 indicators and older IL902, IS902 and IS903 indicators with two
connector strips (8-pin power & 9-pin communications)
This remote does NOT work with the Electro-Mechanical indicator, OR older IL902, IS902 or IS903
indicators with a single power/communications connector strip
3857501 Additional Push Button “Plus” Plug-In Set:
Includes:
Momentary ON Push Button, PB900, for (+) number change on indicator
Plug-In Push Button Cable, 33 feet (white flat cable with RJ10 plugs)
Affixing tape for mounting Push Button Push Button Base has holes for optional fixing with screws
3857502 Additional Push Button “Minus” Plug-In Set:
Includes:
Momentary ON Push Button, PB900, for (-) number change on indicator
Plug-In Push Button Cable, 33 feet (white flat cable with RJ10 plugs)
Affixing tape for mounting Push Button Push Button Base has holes for optional fixing
Additional LED Displays:
3852820 Two-Digit Indicator Plus Pack:
Includes:
Two-Digit INR902 Indicator, 12” wide x 10” high x 2½” deep, with 4” wide x 5” high red bar-segmented
numbers & black housing
Plug-in power supply (16-1/2 ft.)
Plug-in data cable (82 ft)
Terminator TOM-Net, 2 each
“Now Serving” decals in several languages
Mounting bracket with wall anchors and screws
Authorized Distributor:
Label-It, Inc
10100 NW 116th Way
Miami, FL 33178
Tel: 305-887-4949.
Fax: 305-887-3339
[email protected]
www.label-it.com