IMET`s GreenPower™ Muffler system that adds water to save fuel

Announcement 6.1.2016
IMET’s GreenPower™ Muffler system that adds water to save fuel welcomes the
arrival of the world’s first water-fed- BMW car - M4 Model, to the USA in the mid 2016.
Nick Cherasaro/Julius J. Rim, Ph.D.,
IMET, Ltd., Northville, MI. 48168
e: [email protected] www.autogreenpower.com
Northville, MI
IMET’s GreenPower™ Muffler fuel-saver technology leads the world’s top automotive fuel-saving
industry including BMW and Mazda in this week of the 2016 Engine Technology International
Exhibit, in Stuttgart, Germany:
 Mazda ( Japan’s auto-maker, @ Engine Technology International.com//June 2016):
“We’ll Create the first HCCI engine and Be the Last Battery-Electric Vehicles”
 BMW (German auto-maker) used “Water-injection” for the first time in history, to
reduce turbo-charged air-inlet temperature drop by 27’C.
 IMET (USA’s independent inventor of the GreenPower™ Muffler) actually measured
the drop of 30’C in the Exhaust Gas Temperature by generating Water-vapor (20% of
fuel volume) by recovery of Engine Waste Heat in the marine engine test on Sep.23,
2015 in Vancouver, Canada, as demonstrated in the 1000 KW gen-set engine of the
Holland America Line-cruise vessel under the sponsorship of the Port of Los Angeles.
The GreenPower™ Muffler is the world’s first engine-Muffler system in which Exhaust Waste
Heat(EWH) of 33% is recovered to boil water to water-vapor (steam) to be combusted with fuel-air
mixture in the in-cylinder combustion chamber at Low Temperature Combustion(LTC) or
HCCI(Homogeneous Charge Compression Ignition).
IMET’s GreenPower™ Muffler can save all motor-fuels by adding water to the fuel/engine system
without ill-effect of adding liquid water as noticed in 1) Water-Emulsion; 2) Water-injection. Adding
water-vapor phase to all Internal Combustion Engines by IMET’s GreenPower™ Muffler system is a
key technology to use water to reduce fuel-consumption for all ICEs, large and small.
Further information is available upon request: Julius J. Rim, Ph.D. [email protected]
IMET, Ltd
45429 Tournament Dr., Northville, MI 48168, USA, Julius J. Rim, Ph.D, 248-765-7747