ABS - AMERICAN BUILDING SUPPLY, INC.
ABS-AMERICAN BUILDING SUPPLY, INC.
FALCON
B SERIES - Dane Design
B Series - Dane Design
Falcon
With Schlage C Keyway
With I.C. Less Core
Features:
•
•
•
•
•
•
•
•
Door Thickness 1-3/8” to 2” standard.
Features:
Backset
2-3/4”
BS
standard,
available 2-3/8” BS.
Door Thickness
1-3/8" to 2" standard.
Specifications
Trim
has
heavy
for lever
return.
Backset
2-3/4" duty
BS springs
standard,
available
2-3/8" BS.
Trim
is through-bolted with
screws
sealant
to provide
strength
to loosening.
Specifications
Trim
has coated
heavywith
dutythread
springs
for lever
return.
Trim &isresistance
through-bolted
with screws coated
Keyways Available Schlage
or I.C. less
core. to provide strength & resistance to loosening.
withC thread
sealant
Keyways
Available Schlage C or I.C. less core.
Trim
Roses are 3-1/2” diameter
Trim 4-7/8” x 1-1/4” ANSI
Roses
3-1/2" diameter
Strike
strikeare
standard
Strike
4-7/8"
x
1-1/4"
ANSI / BHMA A156.2, series 4000 grade 2ANSI strike standard
ANSI
/ BHMA
UL
1-1/2
hour B label A156.2, series 4000 grade 2
UL
1-1/2 hour B label
FUNCTIONS
Factory
No.
Description
ANSI No. / Grade
ANSI
B101
Passage
Latch bolt by lever at all times
F75-2
B301
Privacy
Latch bolt by levers outside lever locked by push button in inside lever.
Rotating inside lever or closing door releases push button. Emergency
release in outside lever unlocks door.
F76-2
B511
Entry
Turn/push button locking. Pushing and turning button locks outside lever
requiring use of key until button is manually unlocked. Push button locking.
pushing button locks outside lever until unlocked by key or by rotating inside
lever. Inside lever always free.
F109-2
B561
Classroom
Deadlocking latch bolt by levers. Outside lever is locked by key in outside
lever. Inside lever is always free.
F84-2
B581
Storeroom
Deadlocking latch bolt by lever inside or key outside. Outside lever is
rigid. Inside lever is always free.
F86-2
Options
• 2 3/8” Bacsket Specify A57420 (SL), A57620 (PL), A57420D (DL)
• 5065 “T” Strike
Stocked Product
Finish 626
B101 Schlage C Keyway
B301 Schlage C Keyway
B511 Schlage C Keyway or Best prep I. C. core less core
4/24/06
B581 Schlage C Keyway or Best prep I. C. core less coreFalcon
Page 1
2/17 American Building Supply, Inc. 1
D200 Series
100-Series
ABS-AMERICAN
MA / ANSI A156.5, 2001, Grade
1
ed Deadbolt Locks
CON
11P
BUILDING SUPPLY,
INC.A156.5, 2001
BHMA / ANSI
Bored Deadbolt Locks
Falcon
ANSI &
GRADE
FALCON
ANSI &
GRADE
D200 - Series
D211P
E0172
E0171
Classroomdeadbolt
Function is also the most flexible.
Our toughest
The new D Series deadbolt from Falcon will fit on virtually any door, thanks to an adjustable backset with an innovative lock-in-place design.
thrownourornew
retracted
by key
from
Available in a Grade 1 orDeadbolt
Grade 2 configuration,
D Series deadbolt
can be
fitted with virtually any Falcon cylinder, enhances lock
strength on the jamb side
of the doorInside
and is easier
install than
deadbolt bolt.
you’ve ever
worked with.
outside.
turnto will
onlyanyretract
Bolt
Series Pricing
Sheet
automatically deadlocks when fully thrown.
21P
Heavy duty* saw-resistant bolt with spinning hardened
steel pin inside for additional protection
* Grade 1 - High Strength Steel
Grade 2 - Zinc
E0161
g Sheet
ade 1
31P
E2141
Integrated anti-pry shield behind
cylinder assembly for added
Single Cylinder x Rose
security and quicker installation
Deadbolt thrown or retracted by key only. Blank
Latch tube construction
plate inside. Bolt automatically
deadlocks when
fully thrown.
D200 Series
E0162
Integrated trim design – fewer
pieces out of the box and
improved installation time
BHMA / ANSI A156.5, 2001, Grade
Accepts all2small
ADA compliant thumbturn
D231P
E2142
Double Cylinder*
format interchangable
Bored Deadbolt Locks
style cores (SFIC) and
Deadbolt thrown or retracted by key from either
side. Bolt automatically
deadlocks when
fully
FALCON
ANSI
&
thrown.
GRADE
D200 Series
Security strike on jamb
has third screw for
deeper anchoring
BHMA / ANSI A156.5, 2001, Grade 2
E0172
m Function
41P
E2151
Single Cylinder
x D211P
Turn
Bored
Deadbolt
Locks
Improved security
rown or retracted by key from
conventional cylinders
Classroom
Function
D241P
Tapered
front resists wrenching E2152
Class
Deadb
outsid
autom
Singl
Deadb
plate i
fully t
Doub
Deadb
side. B
throw
Singl
Deadbolt thrown or retracted by key
fro
Deadb
Deadbolt thrown or retracted
by keyAdjustable
or by backset
turn.with
strike design
lock-in-place
outside. Inside turn will only retract
bola
ide turn will only
retract
bolt.
Bolt & Added
design forthrown.
greater versatility
Bolt
Bolt
automatically
deadlocks
when fully
space inside strike
FALCON
ANSI
box
for
true
deadlatch
automatically deadlocks when fully thro
ly deadlocks when fully thrown.
GRADE
Features:
Available functions (Exterior x Interior)
The new D Series deadbolt from Falcon will fit on virtually any door, thanks to
D211P
Classroom
Function
Gradebackset
1 BHMA
-E0172
ANSI
A156.5, 2001,
Grade
1 design.
auxiliaryAvailable
lock, Available
for 3-Hour
fire
door
E0162
Single
Cylinder
x Rose
linderCertification
x Rose
D261
E2192
an adjustable
with
an innovative
lock-in-place
in a UL Listed
• Single
cylinder
x thumbturn
Thum
Grade
2 BHMA
- ANSI A156.5,
2001,
Gradedeadbolt
2 auxiliary
Available
UL Listed
for key
3-Hour
fire
door
Deadbolt
thrown
retracted
by
from
Grade 1 by
or
Grade
2 configuration,
our new
D Series
canlock,
be or
fitted
• Single
cylinder
x thrown
thumbturn -or retracted by key
Deadbolt
onl
rown or
retracted
key
only.
Blank
Deadb
Deadbolt 1-1/8” x 2-1/4”, Square corner faceplate, 1” housing diameter, 1” throw
function
with virtually any Falcon cylinder, enhances
lock strength
on the turn
jamb side
of only classroom
outside.
Inside
will
retract
bolt.
Bolt
Bolt
plate inside. Bolt automatically deadloc
. Bolt automatically
deadlocks
when
No ou
Strike 1-1/8”
x 2-3/4”, lipless,
with box
• Single cylinder x rose
the door and is easier to install than any deadbolt you’ve ever worked with.
automatically
deadlocks
when
fully
thrown.
n.
Door
Range
1-3/8”
1-3/4”
standard
n.
when
• Nofully
outsidethrown.
trim x thumbturn
Reinforcement
Metal
dust box reinforcer with three - 3” screws
It’s simple,
really.
• Rose x thumbturn
Trim Ring 1” Wrought brass or bronze, reinforced with security insert
indicator
x thumbturn
E0162
Cylinder E2142
x Rose• Occupancy
giving our
D231P
Double
Cylinder*
ylinder*
Backset Because
2-3/8”
andcustomers
2-3/4” adjustable Single
D261M
E01112 Thum
nish Codes and Descriptions
de
Description
cylinder
Safety, by
Security
Uncompromising
Value
thrown or retracted• Double
by
key
only.
Blankor retracted by key
Blankor retracted
Deadbolt
thrown
fro
rown
keyand
from
either Deadbolt
Deadb
is
what we do
best.
D231
Double
Cylinder
D241
Single
Cylinder
x
Turn
D271
Thumbturn
x
(US3)
Bright
Brass
platethrown
inside.
Bolt automaticallyside.
deadlocks
when
when Deadbolt deadlocks
Bolt automatically
deadlocksOutsid
when
utomatically
when fully Deadbolt
thrown or retracted by key
or retracted by key or by
Occupancy
Indicator
fully
thrown.
(US4)
Brass
thrown.
from either
side. Bolt automatically Satinturn.
Bolt automatically deadlocks when
deadlo
Deadbolt thrown or retracted by turn unit
deadlocks when fully thrown.
fully thrown.
only. Occupancy indicator on outside (reads
(US10B)
Oil Rubbed Bronze
either in use Cylinder
or vacant with color
coding). Bolt
D231P
E2142 Double
Cylinder*
D241P
E2152 Single
x Turn
linder x Turn
D271
Thum
automatically
deadlocks
when
fully
thrown.
(US26)
Bright
Chrome
Deadbolt thrown or retracted by
key from
eitheror retracted by key
eitheror retracted by key or by turn.
Deadbolt
thrown
or
rown
Occu
side. Bolt automatically deadlocks
fully deadlocks when
ully deadlocks
Bolt when
automatically
fully
atically
when fully thrown.
(US26D)
Satin Chrome
Deadb
thrown.
Occup
use or
Find out more at www.falcon.ingersollrand.com
D241P
E2152
Single
Cylinder
x
Turn
D261
Inside Only
Stocked Product
Stocked
Product E2192 Thumbturn,
Stocked Product
autom
Finish�����613,
Finish�����613,
626
FA-5295 Rev 02/08
Deadbolt626
thrown or retracted by
key
or
by
turn.
turn. Finish�����626
Deadbolt thrown or retracted by turn un
Keyway���Schlage C, I.C. Core less Core
Keyway���Schlage C, I.C. Core less Core
Indicator Key 61-509
Bolt automatically deadlocks when
fully thrown.
hrown.
No outside
trim. Bolt automatically dea
2
American
Building
Supply,
Inc.
2/17
tification
Grade 1 BHMA - ANSI A156.5, 2001, Gradewhen
1 auxiliary
lock, Available UL L
fully thrown.
andard Features*
Descriptions
ABS-AMERICAN BUILDING SUPPLY, INC.
MA - Series
Falcon - Heavy Duty Levers
Features:
Door thickness: Standard accommodates thickness
of 1-3/4” to 2-1/4”.
Backset: 2-3/4” only.
Case: Cold formed steel, zinc dichromate plated,
.090” thick. Optional lead wrapping available.
M SERIES
H E AV Y D U T Y L E V E R S ( C O N T I N U E D )
Hubs: Hardened steel.
Handing: Right hand is standard; left hand optional.
Reversible in the field.
Cylinders: Furnished with Schlage “C” key way . IC
cylinders available as an option
29/16"
2-9/16”
Bind Resistant Trim: Heavy-duty through-bolted
inserts clamp the trim on the door assuring proper
alignment. Designed to bottom out on 1-3/4” doors to
prevent door collapse. Provided with 10-32 screws for
strength and thread sealant to prevent loosening.
27/8"
2-7/8"
41/2"
4-1/2"
AG
Avalon-Gala
Latch Bolt: Two-piece brass, mechanical anti-friction
M SERIES
bolt. 3/4”
projection.
HEA
VY DUTY LEVERS
Stocked Product
2-9/16”
29/16"
Dead Bolt: 1” throw, brass with a 1/4” thick hardened
steel, freeturning, saw-resistant roller.
2-1/2"
21/2"
4 /2"
4-1/2"
1
Finish: 626
DG
Dane-Gala
Heavy Duty
Lever
Trim
(LM)
Faceplates:
(Armored
Front)
1-1/4”
x 8” brass, bronze
or forgedsteel
leversadjustable
(Avalon, Dane
Quantum)
wrought brass, bronze or stainless levers (Kim and Sutro), wrought rose and
andCast
stainless
forand
door
bevel. and
Reinwrought
escutcheons
are
standard.
Sutro
is
a
solid
lever,
forced by heavy gauge steel with stabilizing ribs. Kim is hollow.
Strike: Brass, bronze or stainless steel. Meets ANSI
DESIGNS
SSEEOptional
RRI IEESS
AII5.1 for frame preparation. Strike M
isM
handed.
Heavy Duty Lever Combinations H H
EE
AA
VV
Y YD D
UU
TT
Y YL E
VV
EE
RR
S S( C( O
NN
TT
I NI N
UU
EE
DD
))
LE
CO
1-1/8
lip-to-center reversible flat lip available.
Levers Series 1000.
ANSI/BHMA: Meets ANSI/BHMA 156.13,
Avalon
Dane
UL: 3 hour A label.
Rose
Gala
AG
DG
Warranty: 1 Year Limited
Escutcheon Napa
AN
DN
Kim
KG
KN
2-3/8"
Quantum
QG
QN
DN
2-1/2"
Sutro
SG
SN
8-1/4”
Dane-Napa
4-1/2”
29/162"9/16"
2-9/16”
2-9/16”
272-7/8"
/82"7/8"
2-7/8"
414-1/2"
/24"1/2"
4-1/2"
AG
AG
Avalon-Gala
Avalon-Gala
29/16"
2-9/16”
3"
3"
6
43/4"
4-3/4"
QG
Quantum-Gala
9 9
2-9/16”
22-9/16”
/16
2"/16"
29/16"
2-1/2"
212-1/2"
/22"1/2"
4 4-1/2"
/24" /2"
4-1/2"
1
2-9/16”
1
DG
DG
3"
Dane-Gala
Dane-Gala
4-7/8"
SG
Sutro-Gala
2/17 American Building Supply, Inc. 3
MM (example: MM521) = Knob Trim
M SER
R II EE SS
LM (example: LM521) = Lever Trim
FIndicates
UnNcCt interchangeable
Ti oI O
O Navailable.
TINUED)
u
n sN S ( C core
Note: If a special function is required and not listed here, please contact the factory for assistance.
To order Falcon M Series locksets, please consult page 19 for ordering information and assistance.
Catalog
ANSI No.
Function
Description
NumberIndicates interchangeable core available.
& Grade
Catalog Number Prefixes: Add the following prefix for the appropriate trim style.
ANSI No.
Catalog
Function
Description
Hotel/Motel Lock Deadlocking latch bolt by inside knob/lever or key outside.
Indicates interchangeable core available.
Number
& Grade
MM (example:
Trim
bolt by turn inside or emergency key outside.
F15-1
Fu
UnNcCt Ti oI O
O N T I NOutside
U MM521)
E Dknob/lever
) = Knobrigid.Dead
n sN S ( CLM
M451
(example:
LM521)dead
= Lever
Projecting
boltTrim
displays occupancy indicator and shuts out all keys except
F15-2
Catalog
ANSI No.
Function
Description
emergency.
Rotating
inside
knob/lever
retracts
both
bolts.
F01-1
Note:
If
a
special
function
is
required
and
not
listed
here,
please
contact
the
factory
for
assistance.
Number
&
Grade
M101
Passage/Closet Latchset Latch bolt by knobs/levers at all times.
F01-2
Hotel/Motel Lock
knob/lever
or key
outside.
Entry/Office
Lock Deadlocking
Deadlocking latch
latch bolt
bolt by
by inside
knobs/levers
except
when
outside
F04-1
M521
Outside knob/lever
rigid.Dead
bolt
by turn
inside
or emergency
key outside.
F15-1
knob/lever
is
locked
by
buttons
in
face,
then
by
key
outside.
F04-2
Indicates interchangeable core available.
M451
Catalog
ANSI No.
Projecting dead
bolt displays
occupancy indicator
all keys except
F15-2
Function
Description
Connecting
Room/Exit
Latch Deadlocking
latch boltand
by shuts
insideout
knob/lever.
Number
M161
& Grade
emergency. Rotating
insideoutside.
knob/lever retracts both bolts.
F10-1,
FUNCTIONS
Non-removable
blank plate
ANSI
Catalog
ANSI No.
Function
Description
F10-2
Number
&
Grade
Entry/Office
bolt bylatch
knobs/levers
except whenexcept
outsidewhen
knob/lever
Entry/Office Lock
Lock Latch
Deadlocking
bolt by knobs/levers
outside
F04-1
F12-1,
M521
F01-1
M531
is
madeLock
inoperative
by
buttons
ininlatch
face.
Dead
by
key
and
turn
inside.
Hotel/Motel
Lock
Deadlocking
bolt
inside
knob/lever
or
key
outside.
knob/lever
isLatch
locked
byby
buttons
face,
thenbybolt
by
key
F04-2
M101
Passage/Closet
Privacy
Latchset
bolt
Latch
knobs/levers,
bolt
by
knobs/levers
dead
bolt
byatoutside.
turn
all outside
times.
inside or
emergency
F02-1
F12-2
MA101
M301
F01-2
Rotating
inside
knob/lever
retracts
both
bolts.
Deadlocking
latch.
Outside
knob/lever
rigid.Dead
bolt
by
turn
inside
or
emergency
key
outside.
F15-1
key
(012727-000-30)
outside
furnished
with
lock.
F02-2
F20-1,
M451
F10-1,
Projecting dead bolt displays occupancy indicator and shuts out all keys except
F15-2
F20-2
F10-2
emergency.
Rotating
inside
knob/lever
both
bolts.
Entry/Office
Lock
Latch
bolt
by knobs/levers
except
when
outside
knob/lever
Connecting
Privacy,
Bedroom
Room/Exit
or Bath
Latch
Lock
Deadlocking
Latch
boltretracts
by
latch
knobs/levers.
bolt
by
inside
Dead
knob/lever.
bolt by
turn
F12-1,
M161
F19-1
M531
is
made
inoperative
buttons
in
face.
Dead boltDead
by key
outside
turn
inside.
M311
Non-removable
from
inside
and Lock
emergency
blankby
plate
key
outside.
outside
furnished
with
lock.
MA311
Entry/Office
Latch
bolt(012727-000-30)
bylatch
knobs/levers.
bolt
byexcept
keyand
outside
or turn
F21-1
Deadlocking
bolt
by
knobs/levers
when
outside
F04-1
F12-2
F19-2
M541
M521
Rotating
insideknob/lever
knob/leverretracts
retractsboth
bothbolts.
bolts. Deadlocking latch.
Rotating
inside
inside.
F21-2
knob/lever is locked by buttons in face, then by key outside.
F04-2
F20-1,
F20-2
Privacy Lock
Lock Latch
Latch bolt
bolt by
operated
by knob/lever
from
side except
when
Privacy
knobs/levers,
dead bolt
byeither
turn inside
or emergency
F02-1
M301
F10-1,
outside
knob/lever
is
locked
by
inside
T-turn.
Operating
inside
knob/lever,
F22-1
key
(012727-000-30)
outside
furnished
with
lock.
F02-2
M321
F10-2
closing
door
or
operating
outside
emergency
release
unlocks
outside
knob/lever.
F22-2
Classroom
Lock
Deadlocking
Outside
knob/lever
F05-1
knobs/levers
except
when
knob/lever
Entry/Office
Latch
bolt
by
Dead bolt
byoutside
key outside
or turn
F21-1
C
Y nL cI N
E sR (Gc U
AtRi D
N
ULock
M
B
TU
Rlatch
N knobs/levers.
Sbolt by knobs/levers.
Fu
t iD
on
on
n uS eA
d
) D TH
M561
F12-1,
M541
Emergency
key
(012727-000-30)
furnished
with
lock.
MA531
M531
locked
by
key outside.
always
F05-2
is madeBedroom
inoperative
by Inside
buttons
in face.
boltfree.
by key outside
andby
turn
inside.
inside.
F21-2
Privacy,
or Bath
Lockknob/lever
Latch
boltDead
by
knobs/levers.
Dead bolt
turn
F12-2
F19-1
Rotating
knob/leverkey
retracts
both bolts. Deadlocking
latch. with lock.
M311
from
insideinside
and emergency
(012727-000-30)
outside furnished
F20-1,
F19-2
F14-1
Rotating
inside
both bolts.
M371
Store Door
Lockknob/lever
Latch bolt retracts
by knobs/levers.
Dead bolt by key from either side.
F20-2
F14-2
Dormitory Lock Latch bolt by knobs/levers except when outside knob/lever is
F13-1
Classroom
Lock Deadlocking
latch
bolt by retracts
knobs/levers.
Outside
knob/lever
F05-1
Privacy
Lock
Latch
bolt
operated
by
knob/lever
from
either
side
except
when
M571
locked
by
projecting
dead
bolt.
Key
outside
dead
bolt
and
unlocks
outside
MA561
Cylinder
Guards*
M561
F13-2
locked
by key
outside.
Inside
knob/lever
always
free.
F05-2
outside
knob/lever
is Latch
locked
by
inside
T-turn.
Operating
inside
F22-1
knob/lever.
Rotating
inside
knob/lever
retracts
both
Entry/Office
Lock
bolt
by knobs/levers.
Deadbolts.
bolt
byknob/lever,
key outside or turn
F21-1
M321
M541
Entry/Restroom
Lock
Deadlocking
latch
bolt
by
knobs/levers
except
when
F09-1
closing
door
or
operating
outside
emergency
release
unlocks
outside
knob/lever.
F22-2
inside.
F21-2
M381 offers two different types of
Falcon
cylinder
guards
in various
thicknesses
to work
with sectional or escutcheon
outside
knob/lever
is
locked
by
key
inside,
then
by
key
outside.
F09-2
Emergency key (012727-000-30) furnished with lock.
Storeroom
Lock/Exit
Lock
Deadlocking
latch
bolt when
by inside
knob/lever
orlong.
key
F07-1
trim,
different
door
ranges
and
various
cylinder
lengths.
Our
standard
cylinder,
985,
is
1-1/8”
The
factory
Dormitory
Lock
Latch
bolt
by
knobs/levers
except
outside
knob/lever
is
M581
MA581
F13-1
outside.
knob/lever
rigid.
F07-2
byOutside
projecting
deadthe
bolt.
Key outside
retracts
bolt andspecified.
unlocks outside
willM571
furnish the correct cam(s) andlocked
cylinder
guard
for
function
and
doordead
thickness
The A08790
F14-1
M371
Store
Doorbrass
Lock
Latch
bolt byknob/lever
knobs/levers.
Dead
boltbolts.
by
key
from cylinder
either
side.lengths F13-2
knob/lever.
Rotating
inside
retracts
both
Classroom
Lock
Deadlocking
latch
bolt
byfrom
knobs/levers.
Outside
knob/lever
F05-1
and
A08794
cylinder
guards
in
bar
stock
are
available
to
accommodate
different
and door
M411
Asylum
Lock
Deadlocking
latch
bolt
by
key
either
side.
Both
knobs/levers
rigid.
F14-2
M561
locked
by keyLock
outside.
always
free. from either side except
F05-2
Front Door
LatchInside
bolt knob/lever
is operated by
knob/lever
thicknesses as shown.
F08-1
Cylinder Guards
M621
when
outsideLock/Exit
knob/leverLock
is made
inoperative
by bolt
a stop
mechanical
means
other F07-1
Storeroom
Deadlocking
latch
by or
inside
knob/lever
or key
F08-2
Classroom
Security
Lock
with Deadbolt
bolt
retracted
knob/lever
from
M581
Entry/Restroom
bolt
by
knobs/levers
except
when
F09-1
than
key,Outside
Dead Lock
bolt
isDeadlocking
operated
bylatch
turnLatch
inside.
Key
outside by
operates
bolt bolts.
outside.
knob/lever
rigid.
F07-2
M381
Dormitory
Lock
Latch
bolt
by
knobs/levers
except
when
outside
knob/lever
is
either side,
except when
outside
lever
is locked;
latch
bolt
then retracted by key
outside
knob/lever
is
locked
by
key
inside,
then
by
key
outside.
F09-2
F13-1
M431
M571
locked or
bykey
projecting
deadlever
bolt.inside.
Key outside
retracts
dead
and unlocks
outside
or rotating
Deadbolt
thrown
orbolt
retracted
by key outside
either
Stocked Product
F13-2
Dormitory
Lock
Latch
boltknob/lever
by knob/lever inside
andbolts.
key outside. Inside knob/
knob/lever.
Rotating
inside
both
Front
Lock lever
Latch
bolt is operatedretracts
by knob/lever
from either side except
or Door
by rotating
inside.
A08790/ A08794 - 000 9/32” side,
F08-1
M641
lever free. Outside knob/lever rigid. Dead bolt by key outside or T-turn inside.
M621
when outside knob/lever is made inoperative by a stop or mechanical means other
- 001
13/32”Classroom
M411
Asylum
Lock
Deadlocking
latch
boltretracted
by
keybolts.
from
either side.from
Both
knobs/levers
rigid. F08-2
Rotating
inside
knob/lever
retracts
both
Deadlocking
latch.
Security
Lock
Latch
bolt
by
knob/lever
either
side,
except
than
key, Dead bolt is operated
by turn inside.
Key
operates
bolt bolts.
- 002
17/32”when
Storeroom
Locklatch
Deadlocking
boltoutside
by
knob/lever
or key
M441
outside Lock/Exit
lever is locked;
bolt thenlatch
retracted
by inside
key outside
or inside,
or by F07-1
M581
Privacy
Lock
(Special)
Latch
bolt
operated
by
key
from
outside
or
by A08794
operating
626
finish
outside.
Outside
knob/lever rigid. A08790
F07-2
985 Cylinder with
985
Cylinder
with
rotating
lever
inside.
Classroom
Security
Lock
with
Deadbolt
Latch
boltinretracted
byDead
knob/lever
from by
Dormitory
LockGuard.
Latch
boltknob/lever
by knob/lever
inside
and
key outside.
Inside
knob/
inside
knob/lever.
Outside
is always
operative.
bolt operated
A08790
Cylinder
Guard.
A08794
Cylinder
M711
either
except
when
outside
lever
is locked;
latch
thennot
retracted
bydead
key bolt.
M641
lever side,
free.
Outside
knob/lever
rigid.
Dead
bolt
keybolt
outside
or
T-turn
inside.
T-turn
inside
or emergency
release
outside.
Keyby
outside
does
operate
M431
Cylinder Guard Application Chart** outside
Front
Door
Lock
Latch lever
bolt
isinside.
operated
by knob/lever
from
either side
except
or inside
key
orknob/lever
rotating
Deadbolt
thrown
or
retracted
Rotating
retracts
both
bolts.
latch.
Operating
inside
knob/lever
retracts
both
bolts.Deadlocking
Deadlocking
latch. by key either
F08-1
M621
whenoroutside
knob/lever
is made inoperative by a stop or mechanical means other
by rotating
lever inside.
F08-2
Door Thickness
985 1-1/8”side,
(cyl.)
986
1-1/4”
(cyl.)
987
1-3/8”
(cyl.)
988
1-1/2”
(cyl.)
than key,Lock
Dead(Special)
bolt is operated
by turn
inside.byKey
operates
bolts.
Latch bolt
operated
keyoutside
from outside
or bolt
by operating
Cylinder Guard Application Chart** Privacy
Classroom
Security
Lock
Latch
bolt
retracted
by
knob/lever
from
either
side,
except
11
1-1/2”
A08794-001
(13/32”)
A08794-002
inside
knob/lever.
Outside(17/32”)
knob/lever is always in operative. Dead bolt operated by
M711
Door
Thickness
985 1-1/8”
(cyl.)
986
1-1/4”
(cyl.)
1-3/8”
(cyl.)
988orbolt.
1-1/2”
(cyl.)
M441
when
outside
lever
is locked;
latch
bolt
then inside
retracted
bykey
keyoutside.
outside
or inside,
by
T-turn
insideLock
or emergency
release
outside.
Key987
outside
does
not operate
dead
1-3/4”
A08794-000(9/32”)
A08794-001
(13/32”)
A08794-002
(17/32”)
Dormitory
Latch
bolt
by knob/lever
and
Inside
knob/
rotating
lever
inside.
1-1/2”
A08794-001
(13/32”)
A08794-002
(17/32”)
Operating
inside
knob/lever
retracts
both
bolts.
latch.
M641
lever
free.
Outside
knob/lever
rigid.
Dead
bolt byDeadlocking
key
outsideA08794-002
or T-turn inside.
2”
A08794-000
(9/32”)
A08794-001
(13/32”)
(17/32”)
Rotating
inside
knob/lever
retracts
both
bolts.
Deadlocking
latch.
1-3/4”
A08794-000(9/32”)
A08794-001
(13/32”)
A08794-002
(17/32”)
2-1/4”
A08794-000 (9/32”) A08794-001 (13/32”)
M SER
R II EE SS
MA - Series
ABS-AMERICAN BUILDING SUPPLY, INC.
Falcon - Heavy Duty Levers
M SER
R II EE SS
2”
A08794-000
A08794-001
(13/32”)
A08794-002 (17/32”)
Privacy Lock (Special)
Latch (9/32”)
bolt operated
by
key
from outside
or by operating
A08794-000
(9/32”)
inside knob/lever.A08794-000
Outside knob/lever
in operative.(13/32”)
Dead bolt operated by
2-1/4”
(9/32”)is always
A08794-001
M711
11
T-turn inside or emergency release outside. Key outside does not operate dead bolt.
2-1/2”
A08794-000 (9/32”)
Operating inside knob/lever retracts both bolts. Deadlocking latch.
Note:Note:
Dimensions
listed
for A08794
alsoalso
apply
to to
A08790.
Dimensions
listed
for A08794
apply
A08790.
**12
Cylinder guards measure 3/16” from shoulder to top. A wavy spring washer is furnished with either cylinder guard.
** Cylinder guards measure 3/16” from shoulder to top. A wavy spring washer is furnished with either cylinder guard.
** Single cylinder functions.
** Single cylinder functions.
12 2-1/2”
Thumb
AmericanTurn/Threaded
Building Supply, Inc. 2/17Cylinders
4
Standard thumb turn threaded cylinders for dead bolt operation of M Series locks may be used in lieu of surface
stainless steel.
Attachment: Lock chassis secured to door by threaded mounting
nuts. Completely preassembled outer trim and inner spindle assembly
are through-bolted over chassis using (2) 10-32 screws. Adding
ABS-AMERICAN
BUILDING
SUPPLY,
INC.
rose and lever to
inner spindle assembly
completes installation.
Handing: Locks are non-handed.
Cylinders: Drilled with 6-pin chambers, pinned in 5. Pinning in 6
chambers available when specified, at no cost. 7-pin cylinders also
available. Cylinder assemblies removable to rekey. Also available
with 6 or 7-pin interchangeable core cylinders. Cylinder housings
and plugs machined from solid brass. Springs are phosphor bronze.
Two nickel silver keys furnished standard. Interchangeable core
Features:
design is available for small format (SFIC) and large format for
Door Thickness: 1-3/4” to 2-1/8”
most manufacturers, see page 8.
T - Series
Falcon - Heavy Duty Levers
standard. Thin door adapter kit (A30775000-00) available for doors thinner than
1-3/4”, please specify door thickness.
Special Order
Latche
2-1/4”
UL liste
standar
Strikes
A115.2
other a
Screws
metal d
Electri
ANSI/
UL: 3 h
Falcon Lock T Series Specifications
Key-in-lever cylindrical locksets shall be Falcon Lock T Series or
equal and meet the following requirements:
• All locks shall meet the new ANSI/BHMA A156.2, Series 4000,
Grade 1 for key-in-lever locksets.
• Locksets shall be UL Listed (3 hour A Label).
Mechanism: Parts constructed of brass
• Locksets shall be provided standard with Pressure Release™
or cold formed steel, zinc plated and
dichromated for rust resistance. Springs
feature. When outside lever is locked, it is not rigid but will
are stainless steel.
move freely without operating the latch bolt.
Attachment: Lock chassis secured to door by threaded
mounting
• Lever trim shall have individual heavy-duty compression springs
nuts. Completely preassembled outer trim and inner spindle
behind rose for lever return and to prevent lever sag. Trim shall
assembly are through-bolted over chassis using (2) 10-32 screws.
be through-bolted with two (2) 10-32 screws coated with thread
Adding rose and lever to inner spindle assembly completes
sealant to provide strength and resistance to loosening. Inner
installation.
Backset: 2-3/4” standard. 2-3/8”
also available. Link (A22161-005-10)
available for 5” backset.
5” backset Special Order
Handing: Locks are non-handed.
and o
Rose
• All le
state d
Allen-h
• Locks
1/8”
• All lo
disas
• Prepa
Accept
Backset (from center of do
Cylinders: Furnished with Schlage “C” keyway and IC prep options.
Trim: Roses are heavy wrought brass or bronze, installed over
pressure cast rose inserts which are through-bolted through door.
Levers are pressure cast (solid levers–no inserts) material finished
to match mating parts.
Latches: 9/16” bolt projection, UL listed with latch faceplates 2-1/4”
x 1-1/8” with square corners standard. 3/4” projection, UL listed
latch with 2-3/4” backset also available. Adjustable front standard.
Strikes: 4-7/8” x 1-1/4” ANSI strike with curved lip to meet ANSI
A115.2 door frame preparation standard.
2-3/8”, 2-3/4”
5/16” Dia. thru hole
5/32”
2-3/4”
2-1/4”
1-1/8”
5/32”
x 1/8”
Deep
Screws: Furnished with combination screws for use in wood or
metal doors and frames.
Electrified Functions: Available in 24 VDC .185 AMP.
2-25/32”
ANSI/BHMA: Meets ANSI/BHMA A156.2, Series 4000, Grade 1.
UL: 3 hour A label.
Warranty: 1 Year Limited
2-1/8” Dia.
Elevation
14
Stocked Product
Design............ Dane, Quantum
Finish ............ 626, (613 Dane SCH “C” Only)
Keyway........... Schlage C, (IC)
Backset.......... 2-3/4” Standard, also available 2-3/8”
2/17 American Building Supply, Inc. 5
Door E
Levers
Levers are solid pressure cast zinc, finished to match mating parts. Roses are wrought brass or bronze installed over steel through-bolted
rose inserts. Pressure Release™ levers are standard. Levers are secured by a spring-loaded retainer. Retainer cannot be depressed when
locks have been locked.
T SERIES
FUNCTIONS
ABS-AMERICAN BUILDING SUPPLY, INC.
5”
Falcon - Heavy Duty Levers
3-1/2”
T SERIES
F-USeries
NFalcon
C T ITOSeries
N S locksets, please consult page 15 for ordering information and assistance.
TTo order
3-1/4”
A
Indicates interchangeable core available.
DESIGNS
Avalon
Catalog
Function
Description
ToNumber
order Falcon
T Series locksets, please
consult page 15 for ordering information and assistance.
5”
Indicates interchangeable core available.
T101
Catalog
Number
Function
Passage/Closet Latchset
3-1/2”
Latch bolt by levers at all times.
Description
ANSI No.
& Grade
F75-1
ANSI No.
& Grade
3-1/4”
T101
T301
T SERIES
T301
T351
FUNCTIONS
Privacy Lock
Passage/Closet
Latchset
Latch
Outside lever locked by push button in inside lever. Rotating
D bolt by levers.
Dane bolt by levers at all times.
Latch
inside
lever or closing door releases push button. Emergency release in outside
lever unlocks door.
F75-1
F76-1
Privacy Lock
Closetbolt
Lockby levers. Outside lever
5” locked by push button in inside lever. Rotating
Latch
Deadlocking
boltdoor
by turn
knobpush
insidebutton.
or leverEmergency
outside except
when
outside
inside lever orlatch
closing
releases
release
in outside
lever
is
locked
by
key.
lever unlocks door.3-1/2”
F76-1
Classroom
Closet LockSecurity Lock
Deadlocking
bolt
frominside
eitherorside
except
when
outside
lever
is
T351
Deadlocking latch
latch 3-1/4”
bolt by
by levers
turn knob
lever
outside
except
when
outside
ToT381
order Falcon T Series locksets, please
consult
pagefrom
15 for
ordering
information
and
assistance.
locked
by
key
inside.
Outside
key
only
retracts
latch.
Outside
lever
is
locked
lever
is locked by key.
Q unlocked
and
only by inside key.
Indicates interchangeable core available.
Quantum
Classroom Security Lock
Asylum
Lock latch bolt by levers from either side except when outside lever is
Deadlocking
Catalog
T381
FUNCTIONS
T411
Deadlocking
operated
bykey
keyonly
in lever
fromlatch.
eitherOutside
side. Both
Function
Description
locked by keylatch
frombolt
inside.
Outside
retracts
leverlevers
is locked
Number
always
inoperable.
and
unlocked
only
by
inside
key.
Abrasive Coated Levers
T101
T411
T501
All levers are available with abrasive coating along the length of the lever to identify entrances to hazardous areas to the handicapped.
Passage/Closet
Latchset
Lockin detail
To order add: “with abrasive coatedAsylum
outer Lock
lever”
section of order.
Entry
Latch
bolt bylatch
leversbolt
at all
times. by key in lever from either side. Both levers
Deadlocking
operated
Push button locking.
Button
on inside locks outside lever until unlocked by key or
always
inoperable.
by
rotating
inside lever. Inside lever always free. Deadlocking latch bolt.
Privacy Lock
4
Entry/Office
Latch
bolt by Lock
levers. Outside lever locked by push button in inside lever. Rotating
Entry Lock
T301
Turn/push
button
locking.
and
turning
button
locks outside inlever
requiring
inside
lever
or
closing
door Pushing
releases
push
button.
Emergency
T501
Push button locking.
Button
on inside
locks
outside
lever untilrelease
unlockedoutside
by key or
T511
use ofunlocks
key until
button is manually unlocked. Push button locking. Pushing button
lever
door.
by rotating inside lever. Inside lever always free. Deadlocking latch bolt.
locks outside lever until unlocked by key or by rotating inside lever. Inside lever
always
free.page
Deadlocking
latch bolt.
Closet
Lock
To order Falcon T Series locksets, please
consult
15 for ordering
information and assistance.
Entry/Office
Lock
T351
Deadlocking
latch
bolt
by
turn
knob
inside
or lever
outside
when
Indicates interchangeable core available.
Turn/push button locking. Pushing and
turning
button
locksexcept
outside
leveroutside
requiring
Office
Lock
lever
is
locked
by
key.
T511
use of key until button is manually unlocked. Push button locking. Pushing button
T521
Turn button locking. Turning button locks outside lever requiring use of key until
locks outside lever until unlocked by key or by rotating inside lever. Inside lever
Catalog
button
is manually unlocked.
lever always free. Deadlocking latch bolt.
Classroom
Lock latchInside
Function
Description
always
free.Security
Deadlocking
bolt.
Number
Deadlocking latch bolt by levers from either side except when outside lever is
T381
locked
by key
Dormitory
Lock
Office
Lock
Classroom
Lockfrom inside. Outside key only retracts latch. Outside lever is locked
and
unlocked
only bolt
byTurning
inside
key.
Deadlocking
latch
bolt
by levers.
levers
except
when
locked
byrequiring
push
button
in
lever.
T521
Turn
button
button
locks
outside
lever
of inside
keylever.
until
T561
Deadlockinglocking.
latch
by
Outside
lever
is locked
by key
inuse
outside
T571
Key
in
outside
lever
locks
or
unlocks
outside
lever
and
releases
button.
Closing
door
button
is
manually
unlocked.
Inside
lever
always
free.
Deadlocking
latch
bolt.
Inside lever is always free.
Asylum
releasesLock
push button. Inside lever always free.
T411
Deadlocking latch bolt operated by key in lever from either side. Both levers
Classroom
Lock
always
inoperable.
Storeroom
Lock
T561
Deadlocking latch bolt by levers. Outside lever is locked by key in outside lever.
T581
Deadlocking latch bolt by lever inside or key outside. Outside lever is inoperable.
Inside lever is always free.
InsideLock
lever always free.
Entry
T501
6
American Building Supply, Inc. 2/17
T851
6
Push button locking. Button on inside locks outside lever until unlocked by key or
Storeroom
Fail Safe)
by
rotating(Electrified
inside lever.– Inside
lever always free. Deadlocking latch bolt.
Inside Lever Always Free. Latch bolt operated by lever from either side except when
outer lever is electrically locked. When outer lever is locked (inoperable), latch bolt
F88-1
ANSI
No.
ANSI
F88-1
F87-1
& Grade
F75-1
F87-1
F82-1
F76-1
F82-1
F109-1
F109-1
F81-1
ANSI No.
& Grade
F88-1
F81-1
F84-1
F90-1
F87-1
F84-1
F86-1
F82-1
ABS-AMERICAN BUILDING SUPPLY, INC.
Falcon - Medium Duty Levers
W - Series Grade 2 Cylindrical Lever and Knob Locks
Features:
•
•
•
•
•
•
•
Reliable and proven Grade 2 construction
Heavy duty springs for better lever return and to prevent sagging
Non-handed for easy field assembly
Abrasive lever coating option available
Priced to fit your opening price point
Schlage C Masterkey available
Manufactured to Ingersoll Rand’s industry-leading quality standards
Lever Styles
Can be suited with a variety of Falcon locks such as
mortise, tubular, grade 1 cylindrical and interconnect.
Dane
Quantum
Rose Diameters
Large Rose
Small Rose
(Only available in Dane Lever)
The Falcon W comes in different rose diameters
to meet your customer needs. The Large Rose
3-1/2” diameter and a Small Rose 2 9/16” diameter to meet your narrow stile door requirements.
2/17 American Building Supply, Inc. 7
Levers are solid pressure-cast zinc, finished to match mating parts. Roses are wrought brass Plain
or bronze installed ov
steel through-bolted rose inserts. A spring-loaded retainer secures levers. Secure side retainer cannot be depresse
without a key that operates the lock.
Small Format
ABS-AMERICAN BUILDING
SUPPLY, INC.
Interchangeable Core
(SFIC)
QUANTUM
DANE
Falcon - Medium Duty Levers
W - Series
DESIGNS
Thumbturn (in
Quantum
Dane
Plain
Conventional
Cylinder
Plain
FUNCTIONS
*
W101
Passage latchset—Latch bolt by levers at all times.
QUANTUM
*
W301
Abrasive Lever Options
ANSI
F75
Small Format
All levers are available
Interchangeable
Core with an abrasive strip along th
disabled. To order add 6 (for example, 6DA for Dane l
(SFIC)
Privacy lock—Latch bolt by levers. Outside lever is locked by push button on inside lever.
Rotating inside lever or closing door releases push button and frees outside lever. Inside
lever is always free. Emergency release in outside lever unlocks door.
F76
Entry lock—Push button locking. Button on inside locks outside lever until unlocked by key or
by rotating inside lever. Closing door release push button and unlocks door. Inside lever
always free. Deadlock latchbolt.
F82
Entry/office lock—Deadlocking latch bolt by levers.Turn/push button locking. Pushing and
turning button locks outside lever, requiring use of a key for unlocking the door until button is
manually unlocked. Pushing button locks outside lever until unlocked by key or by rotating
inside lever. Inside lever is always free.
F109
4
W501
*
W511
Plain
*
W561
Thumbturn (
Conventional Cylinder
Classroom lock—Deadlocking latch bolt by levers. Outside lever is locked by key in outside
Abrasive Lever
Options
F84
lever. Inside lever is always free.
All levers are available with an abrasive strip along the length of the lever to identify entrances to areas hazardous to
disabled. To order add 6 (for example, 6DA for Dane lever or 6QU for Quantum lever) to the order number.
*
W581
Storeroom lock—Deadlocking latch bolt by lever inside or key outside. Outside lever is
always locked. Inside lever is always free.
F86
4
*
W12
Single dummy trim—Single trim, surface-mounted rigid lever.
*Available as small rose
Small Rose - stocked
Only available in Dane Lever
8
American Building Supply, Inc. 2/17
Stocked Product
DesignKeyway
Dane:
Schlage C, IC core stocked 626
Quantum: Schlage C
Backset
2-3/4” Standard, also available 2-3/8”
Finish
605, 613, 625, 626
626, 613
ABS-AMERICAN BUILDING SUPPLY, INC.
B - Series
D200 - Series
T - Series
W - Series
Falcon - Latches
Stocked Product
P/WDESCRIPTION
FINISH
A57420
A57420D
A57435
A57435D
A57620
626
626
626
626
626
SL, 2-3/8”BS, 1”Face Plate
DL, 2-3/8”BS, 1”Face Plate
SL, 2-3/4”BS, 1-1/8”Face Plate
SL, 2-3/4”BS, 1-1/8”Face Plate
SL, 2-3/6”BS, 1” Face Plate F/301
Stocked Product
P/WDESCRIPTION
FINISH
Q330-253
613, 626
ADJ, Square Corner, 1-1/8” x 2-1/4” FP
Stocked Product
P/WDESCRIPTION
FINISH
23981111
23981137
23981160
23981145
613, 626
613, 626
613, 626
613, 626
SL, 2-3/8” BS, 1” Face Plate
SL, 2-3/4” BS, 1-1/8” Face Plate DL, 2-3/8” BS, 1” Face Plate
DL, 2-3/4” BS, 1-1/8” Face Plate Stocked Product
P/WDESCRIPTION
FINISH
Q330197
Q330201
Q330203
Q330206
Q330207
Q330209
605, 613, 626
613, 626
613, 626
605, 613, 626
613, 626
613, 626
DL, 2-3/4”BS, 1-1/8”Face Plate
DL, 2-3/8”BS, 1”Face Plate
DL, 2-3/8”BS, 1-1/8”Face Plate
SL, 2-3/4”BS, 1-1/8”Face Plate
SL, 2-3/8”BS, 1”Face Plate
SL, 2-3/8”BS, 1-1/8”Face Plate
2/17 American Building Supply, Inc. 9
ABS - AMERICAN BUILDING SUPPLY, INC
Interchangeable
Core
Standard IC core uses a single spring cover.
Stocked uncombinated without pins, springs, or keys.
Stock keyways A & B
C606ACC does not inlcude control & operating keys
FALCON - Cylinders & Keys Note
ABS-AMERICAN
SUPPLY,
FALCONBUILDING
- Cylinders
& Keys INC.
Interchangeable
Core
Note
Standard IC PART
core uses
cover.
NO.a single spring
DESCRIPTION
FINISH
Stocked uncombinated without pins, springs, or keys.
9FALC646A626
UNCOMBINATED
CORE,
A
KEY
WAY
6
PIN
626
Stock keyways A & B
Interchangeable
Standard IC core uses a single spring cover.
9FALC646B626
UNCOMBINATED
KEY WAY 6 PINwithout pins, springs, or keys.
626
C606ACC does
not inlcude control
& operating keys CORE,
Core
StockedB uncombinated
Stock
keyways
A
&
B
9FALC607A626
COMBINATED CYLINDER A KEYWAY 7 PIN
626
Note
C606ACC does not inlcude control & operating keys
9FALC606ACC
TEMPORARY CORE
BLACK
LIS
Falcon - Cylinders & Keys
$
$
ABS - AMERICAN BUILDING SUPPLY, INC.
Interchangeable Standard IC core uses a single spring cover.
9FALKB6322A
KEY ONLY
F/TEMP CORE
SCRIPTION
FINISH
LIST
PRICE
Core Stocked uncombinated without
pins, springs, or keys.OPERATING
Stocked
Product
CONTROL
KEY
ONLY$ F/TEMP
StockCORE,
keyways
A & BWAY 6 PIN9FALKB6092A
COMBINATED
A KEY
626C646
18.30
Uncombinated
core,CORE
6 pin, Keyways A & B, Finish 606, 626
PART
NO.control & operating
DESCRIPTION
Note
C606ACC
does
not
include
keys
C647
Uncombinated
core,
7 pin, Keyways A & B, Finish FINISH
606, 626
COMBINATED CORE, B KEY WAY 6 PIN
626
$ 18.30
9FALC646A626
UNCOMBINATED CORE,
A
KEY
WAY
6
PIN
626
C606ACC Temporary core
MBINATED CYLINDER A KEYWAY 7 PIN
626
$ 31.50
C607 Combinated
core,
7pin, Keway A, Finish 626
9FALC646B626
UNCOMBINATED CORE,
B KEY WAY
6 PIN
626
MPORARY CORE
BLACK
$ 14.00
Interchangeable
Standard
IC
core
uses
a
single
spring
cover.
KB6322A
Operating
Key
for
Temp
core
9FALC607A626
COMBINATED CYLINDER A KEYWAY 7 PIN
626
Core
Stocked
uncombinated
without
ERATING KEY ONLY F/TEMP CORE
- KB6092A
$ 4.30
Control
Key for
Temp pins,
core springs, or keys.
9FALC606ACC
TEMPORARY CORE
BLACK
Stock
keyways A & B
Key F/C607
NTROL KEY ONLY F/TEMP CORE
- KB6322AC Cut $Operating
5.40
C606ACC
does
not
inlcude
control
&
operating
keys
9FALKB6322A Note OPERATING KEY
ONLY
F/TEMP
CORE
KB6092AC Cut Control Key F/C607
007
9FALKB6092A
ONLY F/TEMP CORE
PART NO. CONTROL KEY
DESCRIPTION
9FALKB5776
-
9FALC646A626
UNCOMBINATED
CORE,KEY
A KEY
WAY 6BPIN
9FALKB628B
BLANK,
KEYWAY I.C.
9FALC646B626
UNCOMBINATED CORE, B KEY WAY 6 PIN
ESCRIPTION 9FALC607A626
$ 31.50
$ 14.00
$ 4.30
FINISH$ 5.40 LIS
KB577G Standard G Key
626
$ 18.30
KB628 A & B Keyway I. C.
$ 31.50
KB608 A626
& B Control Blank
9FALC606ACC
Y BLANK, STANDARD
G KEYWAY
PART NO.
DESCRIPTION
9FALKB6322A
OPERATING KEY
ONLY F/TEMP
Y BLANK, A KEYWAY
I.C.
N/ACORE
$ 1.40
9FALKB5776
KEY
BLANK,
STANDARD
G KEYWAY
9FALKB6092A
CONTROL
KEY
ONLY
F/TEMP
CORE
C953
Rim
Cylinder
Housing
Y BLANK, B KEYWAY I.C.
N/A
$ 1.40
9FALKB628A
KEY BLANK, A KEYWAY I.C.
Horizontal tailpiece standard.
May be
BLACK
-
Stocked Product
008
C953
KEY BLANK, B KEYWAY
I.C. 613, 626 Finish 6 pin or 7 pin I. C. Less core
0
LIST PRICE
N/A
Stocked
626 Product
$ 18.30
COMBINATED CYLINDER A FINISH
KEYWAY 7 PIN LIST PRICE
TEMPORARY CORE
N/A
$ 1.20
changed to vertical 9FALKB628B
$ 18.30
N/A
FINISH
KEY BLANK, A KEYWAY I.C.
LIST PRICE
$ 18.30
KEY BLANK, STANDARD G KEYWAY
DESCRIPTION
9FALKB628A
$
-
FALCON - Cylinders & Keys
Key PART
Blanks
NO.Standard
$
N/A
$ 14.00
FINISH
$ 4.30
N/A
$ 5.40
N/A
N/A
LIST PRICE
$ 1.20
007
C987 613, 626 Finish 1-3/8” F/ 6 or 7pin I. C. Less core
C988 613, 626 Finish, 1-1/2” for 6 pin or 7 pin I. C. Less core
$ 1.40
$ 1.40
Cylinders for IC Less Core
C987 mortise cylinder housing
PART
Furnished
withNO.
standard #5 cam DESCRIPTION
FINISH
LIST PRICE
9FALKB5776
KEY BLANK, STANDARD G KEYWAY
N/A
$ 1.20
9FALKB628A
KEY BLANK, A KEYWAY I.C.
N/A
$ 1.40
9FALKB628B
KEY BLANK, B KEYWAY I.C.
N/A
$ 1.40
008
985C & 986C Mortise Cylinder
900 Series cylinders are furnished
with #4 straight cam and 250 Series
with #1 cloverleaf cam unless
otherwise specified.
Stocked Product
985C
986C
4/24/06
Falcon
Page 7
CAMS Only
1-1/8”
1-1/4”
626 Finish
626 Finish
Stocked Product
AO9894 for M531
AO9897 for M561 and M581
AO9894
10
American Building Supply, Inc. 2/17
AO9897
4/24
Fal
Pag
13;
NON-HANDED RIM DEVICE 19-R SERIES
NON-HANDED RIM DEVICE 19-R SERIES
ABS-AMERICAN BUILDING SUPPLY, INC.
Monarch by Falcon - Exits
Panic Exit Hardware
Panic Exit Hardware
The Monarch 19-R Series rim device that delivers superior panic hardware with modern touchbar styling. This non-handed device covers a
161 cutout and The
may Monarch
be used on
13⁄4"Series
narrow
aluminum
doors.superior
The “EO”
(Exithardware
Only) device
ready to
accept styling.
any trimThis
function
shown device covers a
19-R
rimstile
device
that delivers
panic
with is
modern
touchbar
non-handed
on page 12.
161 cutout and may be used on 13⁄4" narrow stile aluminum doors. The “EO” (Exit Only) device is ready to accept any trim function shown
on page 12.
19 Series - Rim Device
F570
Standard
F490
Strike optional
F570
Standard
Features:
F490
Strike optional
565
571/571A
For narrow stile door and
For19REO
rim x vertical
• Part number:
X Finish 571/571A
565
removable mullion installations.
rod installations.
2789
Cylinder Dogging
For narrow stile door and
For
rim
x
vertical
• Function stocked: “EO” exit only
Dogging Key
removable mullion installations.
rod installations.
2789
Cylinder Dogging
• Trims Separately: Note: Lever trim is handed
Dogging Key
ANSI 910)
ANSI
• 1906T Thumb piece ( new number
DEVICE
&
TRIM
Type
Function
• 1909NL Night latch ( new number 910NL) ANSI
ANSI Specifications
DEVICE
&
TRIM
Type
Function
Specifications
19-R-EO
1
or
4
01
Hand: Non-Handed.
• 1910L Entry Lever Dane ( new number 912L)
19-R-DT
1
or
4
02
Functions:
All functions
built into
“EO” device. All 19 Series trim works
19-R-EO
1
or
4
01
Hand:
Non-Handed.
• 914KIL BE Key in Lever( sectional) Blank Escutcheon
with rim or vertical devices. See Trim Selection Chart on pages
19-R-NL
1 or 4
03
The
Monarch
19-R
Series
rim
device
superior
19-R-DT
1
or
4
02
Functions:
All
functionsthat
builtdelivers
into “EO” device.
All 19 Series trim works
• 914KIL IC Key in Lever ( sectional) Lever Entry X IC core
12 and 13.
with
rim or vertical
devices.
SeenonTrim Selection Chart on pages
19-R-TP
1 or 4
05
19-R-NL
1
or
4
03
panic
hardware
with
modern
touchbar
styling.
This
• 914KIL KD Key in Lever ( sectional) Lever Entry
Finishes: Powder-coated aluminum–SP28;
12 and 13. powder-coated duranodic–SP313;
19-R-TP-NL
1 or 4
06
19-R-TP
1 or 4
05
steela US-32D.
handed devicestainless
covers
161 Powder-coated
cutout and aluminum–SP28;
may be usedpowder-coated
on
• 19-R-K
914KIL
NL
Key
in
Lever
(
sectional)
Lever
Night
Latch
Finishes:
duranodic–SP3
(or L or KIL) 19-R-TP-NL
1 or 4
08
1 or 4
06
Strikes:
F570
standard.
565, 571/571A,
F490
optional.
stainless
steel
US-32D.
13⁄4”
narrow
stile
aluminum
doors.
• Finishes:
Aluminum
and
Duro
3
19-R-K-NL (or L-NL or
KIL-NL)
1 or 4
09
19-R-K
(or L or KIL)
1 or 4
08
Latchbolt: Stainless
steel, ⁄4" throw.
Strikes:
F570 standard. 565, 571/571A, F490 optional.
• Length: 36” and 48”
19-R-K-NL
1 or 4
09
Deadlocking Latchbolt: Standard.
Note: For blank escutcheon
specify(or
BE.L-NL or KIL-NL)
Latchbolt: Stainless steel, 3⁄4" throw.
• ANSI A156.3-2001 Grade 1 standards, UL Listed
1
Dogging Feature:
⁄2 turn
hex dogging standard.
Deadlocking
Latchbolt:
Standard.No threaded parts to wear out.
Note: For blank escutcheon specify BE.
• Cut out: 161 Fire Exit Hardware
1
Cylinder Dogging:Dogging
SpecifyFeature:
“CD” prefix. Use
11⁄8"hex
long
mortisestandard.
cylinder with
⁄2 turn
dogging
No threaded parts to wear out.
NON-HANDED
RIM DEVICE
NON-HANDED
RIM DEVICE
F-19-RF-19-R
SERIESSERIES
Fire Exit Hardware
standard “A” cam.
Cylinder Dogging:
Specify “CD” prefix. Use 11⁄8" long mortise cylinder with
Stock Sizes:
3'0" and 4'0". (See chart
on page
standard
“A” 15.)
cam.
The
Rim fire
device addition
is an excellent
the device
touchbar.
This1device
is
non-handed
and
is listed
by fire
UL
for
B label fire door
3
The F–19 Rim fireF–19
exit device
is anexit
excellent
to theaddition
touchbar.toThis
is non-handed
and
by4'0".
ULthickness
for
B label
door
Doors:
⁄4" thick,Sizes:
woodisorlisted
metal.
Specify
if other
than
13⁄4".
Stock
3'0" and
(See
chart
page
15.)
installations
on
4'0"
x
7'2"
single
doors
and/or
8'0"
x
7'2"
double
doors
with
an
F–4023
removable
mullion
or on
KRF-4023.
The “EO” (Exit
3or
installations on 4'0" x 7'2" single doors and/or 8'0" x 7'2" double doors
withStile
an F–4023
mullion
KRF-4023.
The
“EO”
(Exit
Narrow
Doors: removable
Specify 565
strike.
(See
chart
on
page
15.)
Doors: 1 ⁄4" thick, wood or metal. Specify thickness if other than 13⁄4".
Only)
device
is
ready
to
accept
any
trim
function
shown
on
page
12.
1
7
Only) device is ready to accept any trim function shown on page 12.
Projection:
⁄ 2" maximum;
Narrow2 Stile
Doors:1 ⁄8" dogged.
Specify 565 strike. (See chart on page 15.)
Electric Function:
CanProjection:
be interfaced with
security
Security
21⁄building
2" maximum;
17⁄8"system.
dogged.
F19 Series - Fire Rated Rim Device
monitoring, electric dogging, exit indicator, and exit alarm
Electric
Function:
Canelectrical
be interfaced
with building security system. Security
available.
(See separate
brochure.)
Fasteners:
F570
Standard
F570
F490
Standard
Strike optional
Features:
F490
Strike optional
Sex Bolts:
ANSI:
Shim Kit:
161 Cutout:
monitoring, electric dogging, exit indicator, and exit alarm
All mounting screws are
concealed.
with sheet
metal
available.
(See Furnished
separate electrical
brochure.)
screws. Machine screws available, specify AMS.
Fasteners:
All
mounting
screws
are
concealed.
Furnished
with sheet metal
3-#4122 (1⁄4-20) SNBscrews.
standard.
Machine screws available, specify AMS.
Certified
A156.3-2001
1 standards.
Sex ANSI
Bolts:
3-#4122Grade
(1⁄4-20)
SNB standard.
1
1
For glass ANSI:
lite applications;
⁄4" thick
SK 19-R⁄4". 1 standards.
Certified
ANSI specify
A156.3-2001
Grade
1
Device
covers
161 cutout
with lite
KIK/KIL
and Centron
trims.
Shim
Kit:
For glass
applications;
⁄4" thick
specify SK 19-R-1⁄4".
Other trim requires cover plate.
161 Cutout: Device covers 161 cutout with KIK/KIL and Centron trims.
Other trim requires cover plate.
• Part number: F19REO X finish
• Function Stocked “EO” exit only
ANSI
ANSI
• Trims Separately: See page ANSI
ANSI
Specifications
DEVICE
&
TRIM
Type
Function
Specifications
•DEVICE
1906T Thumb
number 910) Function
& TRIM piece ( new Type
“B” label (11⁄2 hr.); 4'0" x 7'2".
1
1 or 4
01
•F-19-R-EO
1909NL NightF-19-R-EO
latch ( new 1number
910NL)
UL: “B” label (1UL:
⁄2 hr.); 4'0" x 7'2".
or 4
01
Functions:
All functions built into “EO” device. All 19 Series trim works
F-19-R-NL
1 or 4
03
Functions:
All functions built into “EO” device. All 19 Series trim works
•F-19-R-NL
1910L Entry Lever
Dane ( new
1 or 4number 912L)
03
with rim or vertical devices. See Trim Selection Chart on pages
with
rim
or
vertical
devices.
Seeexcellent
Trim Selection
Chart on pages
or 4
05
The F–19 Rim fire exit device12isandan
addi13.
•F-19-R-TP
914KIL BE KeyF-19-R-TP
in Lever( sectional)
Blank051Escutcheon
1 or 4
12 and 13.
F-19-R-TP-NL
1 or 4
06
tionFinishes:
to the touchbar.
This device
is non-handed
and powder-coated duranodic–SP313
Finishes:
Powder-coated
aluminum–SP28;
1 or 4
•F-19-R-TP-NL
914KIL IC Key in Lever ( sectional)
Lever06Entry X IC core
Powder-coated aluminum–SP28; powder-coated duranodic–SP313;
stainless steel US-32D.
F-19-R-K (or L or KIL)
1 or 4
08
is
listed
by
UL
for
B
label
fire
door
installations
on
stainless
steel
US-32D.
F-19-R-K
(or
L
or
KIL)
1
or
4
08
• 914KIL KD KeyF-19-R-K-NL
in Lever (or
( sectional)
Lever1Entry
Strikes:
Stainless steel, F570 or F490.
L-NL or KIL-NL)
or 4
09
Stainless
steel, and/or
F570 or F490.
L-NLin
or Lever
KIL-NL) ( sectional)
1 or 4
4’0”Strikes:
x 7’2” single
doors
8’0” x 7’2” double
•F-19-R-K-NL
914KIL NL(orKey
Lever09Night Latch
Latchbolt:
Stainless steel, 3⁄4" throw.
3
Note: For blank escutcheon specify BE.
Latchbolt:
Stainless
steel,
⁄4" throw. mullion or CRFdoors
with
an
F–4023
removable
Note:
For
blank
escutcheon
specify
BE.
• Finishes: Aluminum and Duro
Deadlocking
Latchbolt: Standard.
Deadlocking4023.
Latchbolt:
Standard.
• Length: 36” and 48”
Stock
Sizes:
3'0" and 4'0". (See chart on page 15.)
Stock Sizes:
3'0" and 4'0". (See chart on page 15.)
• ANSI A156.3 Grade 1
Doors:
13⁄4" thick, wood or metal. Specify thickness
if other than 13⁄4".
3
Doors: 1 ⁄4" thick, wood or metal.
Specify thickness if other than 13⁄4".
(SNB must be specified on wood or composite doors.)
• UL for 1-1/2” hour door
(SNB must be specified on wood or composite doors.)
6• Cut out 161
21⁄2" maximum.
Projection: 21Projection:
⁄2" maximum.
6
Electric
Function:
Can be interfaced with building security system. Security
Electric Function:
Can be interfaced with building security system. Security
Fasteners:
monitoring, electric dogging, exit indicator, and exit alarm
monitoring, electric dogging, exit indicator, and exit alarm
available. (See separate electrical brochure.)
available. (See separate
brochure.)
2/17 electrical
American
Building Supply, Inc. 11
Fasteners:
All mounting screws are concealed. Furnished with all
All mounting screws are concealed. Furnished with all
machine screws.
ANSI
Type
ANSI
Function
19-V-EO
2 or 5
01
19-V-DT
2 or 5
02
19-V-NL
2 or 5
03
19-V-TP
2 or 5
05
2 or 5
06
2 or 5
08
2 or 5
09
DEVICE & TRIM
Specifications
Hand:
Functions:
Field reversible.
Fire Exit Hardware
ABS-AMERICANBUILDING
SUPPLY, INC.
9 Rim, the 19–V Exit Device
complies with most
19-V-TP-NL
ce applied. This device is19-V-K
regularly
furnished
(or L)
are bolt at bottom. The19-V-K-NL
“EO” (Exit
Only) device is
(or KIL)
All functions built into “EO” device. All 19 Series trim works
with rim or vertical devices. See Trim Selection Chart on pages
12 and 13.
Finishes:3788 Powder-coated aluminum–SP28;
powder-coated
Manufactured
to theduranodic–SP313;
same exacting standards as the F–
Strike stainless steel US-32D.
REVERSIBLE VERTICAL
ROD
19-V
SERIES
Monarch
byDEVICE
Falcon
- Exits
AngleREVERSIBLE
Bracket:
E 19-V SERIES
VERTICAL ROD DEVICE
Note: For blank escutcheon specify BE.
F19 Series - Fire Rated
Vertical Rod Device
Latchbolt: Top stainless steel 3⁄4" throw. Bottom square bolt 1⁄2" throw.
Deadlocking Latchbolt: Standard.
ANSI ANSI
1
Dogging Feature:DEVICE
⁄2 turn
dogging standard. No
threadedFunction
parts to wear out.
& hex
TRIM
Type
Cylinder Dogging:F-19-V-EO
Specify “CD” prefix. Use 11⁄8" long mortise cylinder with
2 or 5
01
Latch retention hold is in the
top latch. Retainer is released
when it engages the strike.
Field reversible.
most exit door requirements, and is fully reversible and
and square bolt at bott
“EO” installations.
(Exit Only) device is ready to ac
Use 4215 angle bracketinstallations.)
in flush transom The
or rabbeted
3788 strike is surface applied standard, 2130 strike is mortised
deadlocking top latch retention
into floor.
Allows use of standard 3788 strike.
19 Series - Vertical Rod
Device
Panic Exit Hardware
ns
nd:
ons:
Strikes:
All functions built into “EO”
device. All 19 Series
Manufactured
totrim
theworks
same exacting stanwith rim or vertical devices. See Trim SelectionManufactured
Chart on pages to the same exacting
3788
dards
as
the
19
Rim,
the 19–V Exit Device
12 and 13.
Strike
Specifications
Hand:
Functions:
standard “A” cam.
FireF-19-V-DT
Exit
Hardware
5
02
Manufactured
to the2 orsame
exacting stan-
Stock Sizes:
3'0" and 4'0". (See chart on page 15.)
standards as the 19 Rim,
the 19–V
Exit
complies
most
F-19-V-NL
2 or 5with
dards
asDevice
the
F–19
Rim,
the03F–19–V
Fire
Doors:3788 13⁄4" thick,
wood
or
metal.
Specify
thickness
if other than
13⁄4Exit
".
9 Rim, the 19–V Exit Device complies with most
Manufactured
to
exit
door
requirements,
and
is
fully
reversible
and
surface
applied.
This
device
is
regularly
furnished
F-19-V-TP
2
or
5
05
1 the same exacting standards as the F–
complies
with most
exit door requirements,
Narrow Stile Doors:Strike To 13⁄Device
4" N.S. aluminum.
With with
controlmost
trim–2exit
⁄4" min.
stile.requireFinishes:
complies
door
hes: Powder-coated aluminum–SP28;
powder-coated
duranodic–SP313;
ce applied.
Thissteel
device
is regularly furnished with deadlocking top latch with latch retention and square bolt
most
exit
requirements,
and is fully reversible and
at bottom.
The
“EO”
(Exit
is
F-19-V-TP-NL
2 Only)
or door
5 device
06
stainless
US-32D.
Projection: 21⁄2" max.,
17⁄8" and
dogged.
and
is
fully
reversible
and
surface
applied.
ments,
is
fully
reversible
and
surface
are bolt3788
at bottom.
The “EO”
Only)
device
is
deadlocking
at bott
F-19-V-K (or L or KIL)
2 or 5 top
08latch retention and square boltStrikes:
ready
to accept any trim function shown onElectric
page 12.
kes:
strike is surface
applied(Exit
standard,
2130
is mortised
Function:
Can be
interfacedThis
with device
building security
systems.furnished
Security
This
device
isstrike
regularly
furnished with deadapplied.
is regularly
into floor.
installations.)
“EO”
to ac
F-19-V-K-NL
(or L-NL
or KIL-NL)
2 orindicator,
5 The
09and
monitoring,
electric
dogging,
exit
exit (Exit Only) device is ready
Latchbolt:
ket:
olt:
olt:
ure:
nd:
ng:
ons:
ns
zes:
ors:
hes:
ors:
on:
kes:
on:
ket:
ers:
olt:
olt:
lts:
ure:
ng:
NSI:
zes:
–V:
ors:
ors:
BR:
on:
ods:
on:
Kit:
ers:
out:
lts:
NSI:
–V:
BR:
ods:
Kit:
out:
locking
top
latch with
latch retention
Use 4215 angle bracket in flush
transom
or rabbeted
installations.
Allows use of standard 3788square
strike. bolt at bottom.
ANSI
Type
Top stainless steel 3⁄4" throw. Bottom square bolt 1⁄2" throw.
Standard.
DEVICE & TRIM
19-V-EO
2 orout.
5
⁄2 turn hex dogging
standard. No threaded parts to wear
Field reversible. 19-V-DT1
2
or
Specify “CD” prefix. Use 1 ⁄8" long mortise cylinder with 5
All
functions
built19-V-NL
into “EO” device. All 19 Series trim2works
or 5
standard
“A” cam.
with rim or vertical devices. See Trim Selection Chart on pages
19-V-TP
2 or 5
3'0"
and13.
4'0". (See chart on page 15.)
12 and
1
ANSI
Function
and
deadlocking top latch retention and Deadlocking Latchbolt:
alarmwith
available.
Note: For blank escutcheon specify BE.
squarescrews
boltare
at concealed.
bottom.Furnished
(This device
is listed
All mounting
with sheet
metal
Stock Sizes:
screws. Machine screws available, specify AMS.
Fasteners:
Specifications
Sex Bolts:
by UL for B label fireANSI
door installations.)
ANSI
3–#4122 (1⁄4 –20) SNB standard. Hollow core wood, light gauge
DEVICE
&
TRIM
Type
Function
Hand: Field
reversible.
Hollow
Metal, etc. require additional sex bolts. 19–V: 6–#2729
01
02
03
05
3
2 or153⁄4".
06
1Powder-coated
⁄4" thick, woodaluminum–SP28;
or19-V-TP-NL
metal. Specifypowder-coated
thickness if other
than
duranodic–SP313;
3
1
19-V-K
(or control
L)
2 or 5
08
To
1 ⁄4" N.S.
With
trim–2 ⁄4" min. stile.
stainless
steelaluminum.
US-32D.
2789
Cylinder Dogging
1
7
19-V-K-NL
(or
KIL) 2130 strike is mortised
2 or 5
09
23788
⁄2" max.,
" dogged.
strike1is⁄8surface
applied
standard,
Dogging
Key
into floor.
Can
be interfacedNote:
with For
building
systems.
blanksecurity
escutcheon
specifySecurity
BE.
monitoring,
electric
dogging,
exit
indicator,
and exit installations.
Use 4215 angle
bracket
in flush
transom
or rabbeted
alarm
Allowsavailable.
use of standard 3788 strike.
3
1
All
screws
concealed.
with
metal
Topmounting
stainless steel
⁄4"are
throw.
BottomFurnished
square bolt
⁄2"sheet
throw.
screws.
Machine
screws
available,
specify
AMS.
Latch retention hold is in the
Standard.
1
latch.
Retainer
released
3–#4122
4 –20) SNB standard. Hollowtop
core
wood,
light isout.
gauge
1
⁄2 turn hex( ⁄dogging
standard. No threaded
parts
to wear
engages
the strike.
Hollow Metal, etc. require 1additional sexwhen
bolts.it 19–V:
6–#2729
Specify “CD”
Use 13–#2729
⁄8" long mortise
#10–24
SNB; prefix.
19–V–LBR:
#10–24cylinder
SNB with
standard “A” cam.
Certified ANSI A156.3 2001 Grade 1 standards.
3'0" and 4'0". (See chart on page 15.)
Latch
retention and 3788 strike top, deadbolt and 2130 flush
13⁄4" thick,
wood or metal. Specify thickness if other than 13⁄4".
strike
bottom.
To 13⁄4strike
" N.S.top.
aluminum. With control trim–2 1⁄4" min. stile.
3788
1
7
2
⁄
2
"
max.,
1
8" dogged.
Furnished to ⁄length
based on 405⁄16" horizontal CL from
finished
floor and awith
7'0"building
door standard.
these
Can be interfaced
securityVariations
systems. from
Security
standards
must
be specified
monitoring,
electric
dogging,when
exit ordering.
indicator, and exit
1
alarm
available.
2130
For
glass
lites applications;
⁄4" thick specify SK-19-V-1⁄4".
Strike
All mounting
are concealed.
Furnished
with sheet
Device
coversscrews
161 cutout
with KIK/KIL
and Centron
trims.metal
screws.trim
Machine
screws
Other
requires
coveravailable,
plate. specify AMS.
Function
Stocked:
Exit only
Certified ANSI•A156.3
2001 Grade
1 standards.
•
Trims
Separately:
Note:
Lever
trim is handed See Trim page
Latch retention and 3788 strike top, deadbolt and
2130 flush
8 bottom. • 1906T Thumb piece ( new number 910)
strike
3788 strike top.
2789 Night latch (Cylinder
Dogging
• 1909NL
new number
910NL)
Dogging
Furnished to length based
on Key
40 ⁄ " horizontal CL from
•
1910L
Entry
Lever
Dane
(
new
number
912L)
finished floor and a 7'0" door standard. Variations from these
standards must
specified when
ordering.
be
• 914KIL
BE Key
in Lever( sectional) Blank Escutcheon
1
For glass litesapplications;
SK-19-V⁄4".
• 914KIL1⁄4"ICthick
Keyspecify
in Lever
( sectional)
Lever Entry X IC core
Device covers161
withKD
KIK/KIL
Centron(trims.
• cutout
914KIL
Key and
in Lever
sectional) Lever Entry
Other trim requires cover plate.
• 914KIL NL Key in Lever ( sectional) Lever Night Latch
• Finishes: Aluminum and Duro
• Lengths: 36” X 84” and 48” X 84”
• ANSI A156.3 2001 Grade 1 Standard; UL Listed
5
16
2130
Strike
12
American Building Supply, Inc. 2/17
SNB;
19–V–LBR:
#10–24
SNB trim works
2 orAll
5 19 01
Functions: F-19-V-EO
All#10–24
functions
built
into “EO”3–#2729
device.
Series
with
rim orANSI
vertical
devices.
Trim
ANSI:F-19-V-DT
Certified
A156.3
2001See
Grade
2 or1Selection
5standards.
02 Chart on pages
12Latch
and 13.
19–V:F-19-V-NL
retention and 3788 strike 2top,
or 5deadbolt
03 and 2130 flush
Finishes: Powder-coated
strike bottom. aluminum–SP28; powder-coated duranodic–SP313;
F-19-V-TP
2
or
5
05
steeltop.
US-32D.
19–V–LBR: stainless
3788 strike
F-19-V-TP-NL
25 or 5 213006strike is mortised
Strikes:
3788
strike
is
surface
applied
standard,
Vertical Rods: Furnished to length based on 40 ⁄16" horizontal CL from
Electric Function:
Hand:
Functions:
Fasteners:
Sex Bolts:
Finishes:
into
floor.
F-19-V-K
(or Lfloor
or KIL)
2 or 5 Variations
08
ANSI:
Strikes:
finished
and a 7'0" door standard.
from these
Angle Bracket: F-19-V-K-NL
Use
4215 (or
angle
bracket
in flush
transom
installations.
L-NL
KIL-NL)
2 orordering.
5 or rabbeted
09
standards
must
beorspecified
when
F-19-V:
Latchbolt:
Allows
use lites
of standard
3788 1strike.
Shim Kit:
For blank
glass
applications;
" thick specify SK-19-V-1⁄4".
Deadlocking Latchbolt:
Note: For
escutcheon
specify⁄4BE.
3
1
Latchbolt:
Top
stainless
steel
⁄
4" throw. Bottom square bolt ⁄2" throw.
F-19-V-LBR:
161 Cutout: Device covers 161 cutout with KIK/KIL and Centron trims.
Stock Sizes:
Latch
retention
Deadlocking Latchbolt: Standard.
Other trim requires
cover
plate. hold is in the
Vertical
Rods:
Doors:
top latch. Retainer is released
1
Dogging Feature:
⁄2 turn hex doggingwhen
standard.
No the
threaded
parts to wear out.
it engages
strike. The
Projection:
closed position.
Cylinder Dogging:
Specify “CD” prefix.door
Useis 1in1⁄8the
" long
mortise cylinder with
Electric Function:
Shim Kit:
standard “A” cam.
161
Cutout:
Stock Sizes:
3'0" and 4'0". (See chart on page 15.)
Fasteners:
Doors: 13⁄4" thick, wood or metal. Specify thickness if other than 13⁄4".
Sex Bolts:
Narrow Stile Doors:
To 13⁄4" N.S. aluminum. With control trim–2 1⁄4" min. stile.
1
7
Projection: 2 ⁄2" max., 1 ⁄8" dogged.
ANSI:
Electric Function:
Can be interfaced with building security systems. Security
monitoring, electric dogging, exit indicator, and exit
F-19-V:
Features:
3–#4122 (1⁄4 –20) SNB standard. Hollow core wood, light gauge
Hollow Metal, etc. require additional sex bolts. 19–V: 6–#2729
• Part number 19VEO X Finish
#10–24 SNB; 19–V–LBR: 3–#2729 #10–24 SNB
Doors:
Specifications
Projection:
alarm available.
Fasteners:
All mounting screws are concealed. Furnished with sheet metal
screws. Machine screws
specify
Latch available,
retention hold
is in AMS.
the
Features
Sex Bolts:
top latch.
Retainer
is released
3–#4122 ( ⁄4 –20) SNB
standard.
Hollow
core wood, light gauge
when it engages the strike. The
Hollow Metal, etc. door
require
additional
sex bolts. 19–V: 6–#2729
is in the closed position.
1
SNB; F19VE
19–V–LBR:
3–#2729 #10–24 SNB
• Part#10–24
number
X Finish
ANSI:
CertifiedStocked:
ANSI A156.3“EO”
2001 Grade
1 standards.
• Function
exit only
19–V:
Latch
retention and Note:
3788 strike
top, trim
deadbolt
and 2130 flush
• Trims
Separately:
Lever
is handed
See
trim page
strike bottom.
•
1906T
Thumb
piece
(
new
number
910)
19–V–LBR: 3788 strike top.
• 1909NL
( new
Vertical Rods:
Furnished Night
to lengthlatch
based on
40 ⁄ "number
horizontal910NL)
CL from
finished Entry
floor and
a 7'0" Dane
door standard.
these
• 1910L
Lever
( newVariations
numberfrom
912L)
standards must be specified when ordering.
• 914KIL
BE Key in Lever(
sectional)
Blank
Escutcheon
Shim Kit:
For glass lites applications; 1⁄4" thick specify SK-19-V-1⁄4".
• 914KIL IC Key in Lever ( sectional) Lever Entry X IC core
161 Cutout: 2130Device covers 161 cutout with KIK/KIL and Centron trims.
•Strike
914KIL
KDrequires
Key cover
in Lever
Other trim
plate. ( sectional) Lever Entry
• 914KIL NL Key in Lever ( sectional) Lever Night Latch
• Finishes Aluminum and Duro
• Lengths: 36” X 84’ and 48” X 84”
• ANSI A156.3 Grade 1 standard
• UL “B” labeled 1-1/2 hour door
5
2130
Strike
16
F-19-V-LBR:
Vertical Rods:
Shim Kit:
161 Cutout:
ABS-AMERICAN BUILDING SUPPLY, INC.
19 Series - Trim Designs
Falcon
All Trims Supplied Less Cylinder
1910L (912) L Trim
Mortise Cylinder
1-1/8”Required
1909NL (910NL)
Rim Cylinder
Required
1906T (910TP)
Mortise Cylinder
1-1/8”Required
Stocked Product
Aluminum, Duro
914 KIL KD Entry
914 KIL BE Blank Escutcheon
914 KIL IC Entry
914 KIL NL Night Latch
Stocked Product
Aluminum, Duro
2/17 American Building Supply, Inc. 13
ABS-AMERICAN BUILDING SUPPLY, INC.
Falcon - Exits
25 R Series - Rim Exit Device
Features
•
•
•
•
•
•
•
•
Non handed
299 strike standard, other strikes available on special order
Latch bolt: Stainless Steel, ¾” throw
Dogging Feature: 1/2 turn hex dogging standard, No thread parts to wear out
Stock sizes: 36” and 48” width doors,
ANSI: Certified ANSI A156.3-2001 Grade 1
Sex Bolts: ( optional) Recommended when device is used with hollow core wood,
composite or light gauge hollow metal doors, For EO device specify eight (8)
#2729 sex bolts. With Trim specify four (4) 2729 sex bolts
EL function : Can be interfaced with Building security systems.
Options:
Cylinder Dogging kit: Specify 25CDK
1-1/8” Mortise cylinder not included.
Stocked Product
36” door width US3, US26, 313AN, US26D
48” door width 313AN, US26D
EL Function stocked: 36” door width 26D
F25-R Series - Fire Rim Exit Device
Features
•
•
•
•
•
•
•
•
•
•
• EL function : Can be interfaced with Building security
Non Handed
systems.
“A” label 3 hours 4’ 0” X 8’ 0”; 8’ 0” X 8’0” with F4023 Mullion
“B” label 1-1/2” hour for 8’0” X 8’)’ with KRF4023 Mullion
299F strike standard, other strikes available on special order
Latch bolt: stainless Steel, ¾ “ throw
Stocked Product
Deadlocking latch bolt standard
Stock sizes: 36” and 48” width doors
Mounting Height: 40-1/4” form CL to finished floor
36” door width US3, US26, 313AN, US26D
Fasteners: All mounting screws are concealed, All machine screws standard
48” door width :313AN, 26D
Sex Bolts: ( optional) Required when device is used with hollow core wood,
composite or light gauge hollow metal doors, For EO device specify eight (8)
EL Function stocked : 36” door width, 26D
#2729 sex bolts. With Trim specify four (4) 2729 sex bolts
•
ANSI: Certified ANSI A156.3 2001 Grade 1 Standards
14
American Building Supply, Inc. 2/17
ABS-AMERICAN BUILDING SUPPLY, INC.
Falcon - Exits
25 V Series - Vertical Rod Exit Device
Features:
•
•
•
•
•
•
•
Hand:Field Reversible
Strikes: 3788 Top strike is surface applied; 2130 bottom strike is mortised into the floor
Latch bolt: Top stainless steel ¾ throw; Bottom bolt is ½” throw
Latch Retention Hold: Standards with top latch
Sex Bolts: ( Optional) Recommended when device is used with hollow core wood, composite
or light gauge hollow metal doors, For EO device, specify twelve (12) #2729 sex bolts,, For
devices with trim specify eight (8) #2729 sex bolts’
ANSI : Certified ANSI A156.3-2001 Grade 1 standard
EL function : Can be interfaced with Building security systems.
Options:
Cylinder Dogging kit: Specify 25CDK
1-1/8” Mortise cylinders not included.
12” & 36” Extension rods Available.
Stocked Product
36” X 96” door size US3, US26, 313AN, US26D
48” X 96” door size 313AN, US26D
EL function stocked: 36” X 96” door size 26D
F25 V Series - Fire Vertical Rod Device
Features
•
•
•
•
•
•
•
•
•
•
•
•
Hand: Field Reversible
UL: “A” Label 3 hour; 8’ X 10’ 90 minute same egress, 8’ X 10’
Wood Door: 20 minute 8’ X 10’; 90 minute 8’ X 9’
Strikes: 3788 Top strike is surface applied; 2130 bottom strike is mortised into the floor
Latch bolt: Top stainless steel ¾ throw; Bottom bolt is ½” throw
Deadlocking Latch bolt: Standard in top latch
Latch Retention Hold: standard with top latch
F25-V LBR; Less bottom rod vertical device; “A” Label 3 hour- 8’ X 8’ 90 minute same
egress’ Wood Door 20 minute 8’ X 8’ openings. (F-LBR Must be ordered in pairs)
Fasteners: All mounting screws area concealed machine screws
Sex Bolts: ( Optional) Required when device is used with hollow core wood, composite or
light gauge hollow metal doors, Fro EO device, specify twelve (12) #2729 sex bolts,, For
deices with rim specify eight (8) #2729 sex bolts’
ANSI: Certified ANSI A156.3 Grade 1 standard
EL function : Can be interfaced with Building security systems.
Options:
12” & 36” Extension rods Available.
Stocked Product
F25 V Stock Finishes: 36” X 96” 313AN, US26D
48” X 96” 313 AN, US26D
F25 V LBR Stocked : EL Function stocked:
36” X 96” and 48” X 96” 313AN,US26D
(Must be ordered in pairs)
36” X 96” 26D
2/17 American Building Supply, Inc. 15
ABS-AMERICAN BUILDING SUPPLY, INC.
Falcon - Exits
25 M Series - Mortise Exit Device
Features:
•
•
•
•
•
•
•
•
•
Options:
Hand: Field Reversible
Cylinder Dogging kit :Specify 25CDK
Strike: 1279 standards
Stocked Product
1-1/8” Mortise Cylinder not included.
Latch bolt: Stainless steel, ¾ throw
36” Width door in 26D
Deadlocking Latch bolt: Standard
Dogging Feature: ½ hex turn, no thread parts to wear out
Fasteners: All mounting screws are concealed metal screws.
Sex Bolts: ( optional) Recommended when device is used with hollow core wood, composite or light gauge hollow metal doors,
For EO device specify six (6) #2729 sex bolts. With Trim specify two (2) 2729 sex bolts
ANSI: Certified ANSI A156.3 2001 Grade 1
Mortise Lock: Heavy wrought lock case with cast or sintered steel parts. Locks are designed to fit standard ANSI A115.1
preparation for 1-/34” thick doors Deadlocked when auxiliary bolt is depress 5/`6”
F25 M Series - Fire Mortise Exit Device
Stocked Product
36” Width door in 26D
Features:
•
•
•
•
•
•
•
Hand: Field Reversible
UL: “A” label 3 hour, 4’ X 10” single doors, 8’ X 10’ pair of doors . (F25M X F25V) “B” Label ( 1-1/2 hour) with F1280 open back strike
Strike: 1279 standard
Latch bolt: Stainless steel, ¾ throw
Deadlocking Latch bolt: Standard
Fasteners: All mounting screws are concealed metal screws.
Sex Bolts: ( optional) Required when device is used with hollow core wood, composite or light gauge hollow metal doors, For EO device
specify six (6) #2729 sex bolts. With Trim specify two (2) 2729 sex bolts
16
American Building Supply, Inc. 2/17
ABS-AMERICAN BUILDING SUPPLY, INC.
Falcon - Exits
25-C Series - Concealed Vertical Rod Device
Features:
•
•
•
•
•
•
•
•
•
•
Hand: Field Reversible
Strikes: 4188 mortised top, 2130 bottom standard
Latch bolt: Top Stainless steel 3/4” throw, Bottom bolt ½”
throw
Deadlocking Latch bolt: Standard in top latch
Latch Retention Hold; Standard in top latch
Dogging Feature: ½ turn hex dogging standard, no threaded
parts to wear out
Fasteners: All mounting screws are concealed metal
Sex Bolts: ( optional) Recommended when device is used
with hollow core wood, composite or light gauge hollow
metal doors, For EO device specify six (6) #2729 sex bolts.
With Trim specify two (2) 2729 sex bolts
ANSI: Certified ANSI A156.3-2001 Grade 1 standards.
Vertical Rods Furnished to length based on 40-1/4” horizontal CL to finished floor and a 7’0” door
Options:
Options: Cylinder Dogging kit: Specify 25CDK
1-1/8” Mortise Cylinder not included.
12” & 36” Extension Rods Available.
Stocked Product
36” X 84” US26D
2/17 American Building Supply, Inc. 17
ABS-AMERICAN BUILDING SUPPLY, INC.
Falcon - Exits
F25-C Series - Fire Concealed Vertical Rod Device
F25C-WDC Series Fire Wood Door Concealed
Vertical Rod Device
Features
•
•
•
•
•
•
•
•
•
•
Hand: Field Reversible
UL: “A” Label 3 hour- 8’ X 10’ 90 minute same egress, 8’ X 10’ Wood Door: 20
minute 8’ X 9’ 90 minute 8’ X 8’
Strikes: 4188 mortise top; 2130 flush strike bottom
Latch bolt: Top Stainless steel 3/4” throw, Bottom bolt ½” throw
Deadlocking Latch bolt: Standard in top latch
Fasteners: All mounting screws are concealed metal
Sex Bolts: ( optional) Required when device is used with hollow core wood, composite or light gauge hollow metal doors, For EO device specify six (6) #2729 sex
bolts. With Trim specify two (2) 2729 sex bolts
ANSI: Certified ANSI A156.3-2001 Grade 1 standards
WDC-20: Reinforced plates supplies standard for 20 minute doors only
Vertical Rods Furnished to length based on 40-1/4” horizontal CL to finished floor
and a 7’0” door
Stocked Product
F25C F25C-WDC
18
American Building Supply, Inc. 2/17
36” X 84” US26D
36” X 96” US26D, US3, US26
ABS-AMERICAN BUILDING SUPPLY, INC.
Falcon - Exits
Lever Trim Only
510 L - Entry Lock/Unlock, 1-1/4 Mortise Cylinders Not Included.
510 LNL - Night Latch, Store Room, 1-1/4 Mortise Cylinders Not Included.
510 LBE - Blank Escutcheon, 1-1/4 Mortise Cylinders Not Included.
511 L - Entry Vandal Resistant, 1-1/4 Mortise Cylinders Not Included.
510 L FSE - Entry Electrical Unlock, 1-1/4 Mortise Cylinders Not Included.
510 LDT - Dummy Trim
510L
510L-NL
510L-DT
510L-BE
Pull Trims
512TP - 1-1/4 Mortise Cylinders Not Included.
512-NL - Night Latch, Rim Cylinder
Stocked Product
512TP
512-NL
Escutcheon: 2-1/4” x 16”
Grip: 6-1/4” C-C
Projection: 2-11/16”
Brass and Stainless Steel
510L, 510LBE, 510LNL Dane
Quantum
510LDT
Dane
511L Dane
Quantum
510L-FSE Dane
Quantum
512TP, 512-NL US3, US26, SP313, 26D
SP313, 26D
26D, SP313
SP313, 26D
SP313, 26D
26D
26D
26D only
2/17 American Building Supply, Inc. 19
ABS-AMERICAN BUILDING SUPPLY, INC.
REVERSIBLERIM
VERTICAL
XX-V SERIES
NON-HANDED
DEVICEROD
XX-RDEVICE
SERIES
NON-HANDED RIM DEVICE XX-R SERIES
RIM DEVICE XX-R SERIE
FalconNON-HANDED
- Exits
Panic Exit Hardware
Panic Exit Hardware
Panic Exit Hardware
The Monarch XX-V Series Vertical Rod Device is designed to meet the demanding requirements of higher traffic installations.
Panic
Exit
Hardware
The Monarch
XX-R
Series
Device is produced
to meet
the vertical
demanding
requirements
higher
traffic
installations.
The XX-V
device
is aRim
surface-applied
(including
strikes)
rod type
with the of
traditional
crossbar
design. This device is
The Monarch XX-R Series Rim Device is produced to meet the demanding requirement
a single point, rim type latch with the traditional crossbar design.
a single
point, rimXX-R
typeSeries
latch Rim
withDevice
the traditional
crossbar
design.
3788
The Monarch
is produced
to meet
the demanding requirem
Strike
a single point, rim type latch with the traditional crossbar design.
XX Series - Rim Device
F570
(Standard)
579
Strike
2789
Dogging Key
F570
579
Specifications
(Standard)
Strike
Hand:
Functions:
Finishes:
F570
(Standard)
565
(Optional)
571/571A
(Optional)
DEVICE
Length
XX-R-EO
4´
F490
Strike
Strikes:
See Trim Selection Chart pages on 16 & 17.
US3 (605); US4 (606); US10 (612);US10B (613); US26 (625);
US26D (626); US32 (629); US32D (630).
3788 strikes are surface applied. 2130 strike is mortised into floor.
565
571/571A
F490
Angle Bracket:
Use 4215 angle
bracket in flush transom installations. Allows use of
(Optional)
(Optional)
Strike
565
571/571A
standard 3788 strike.
F490
(Optional)
(Optional)
Strike
Strike
Min.
Stile
Door
Opening Width
565 Flush
565
F570/F490
579
31⁄4˝
33⁄4˝
4˝
31⁄2˝
2´6˝
2´6˝
2´6˝
2´6˝
2789
Dogging Key
2789
Dogging Key
579
Field reversible. 2789
Strike
Dogging Key
up to
up to
up to
up to
3´10˝
3´11˝
4´0˝
3´10˝
Arms:
Forged brass, aluminum and investment cast stainless steel.
Crossbars: 1˝ O.D., brass, bronze and stainless steel. Reinforced
• Part number
XXREO X finish
Specifications
Min.
Door
crossbars available.
Specifications
DEVICE
Length Strike
Stile
Opening
• Handed Specify LHR
or RHR
Door Width
Latchbolt:
Top stainless steel, Min.
⁄ ˝ throw. Bottom
stainless steel bolt, ⁄ ˝ throw.
Hand: Field reversible.
Specification
DEVICE
Length
Strike
Stile
Opening
Width
The
Monarch
XX-R
Series
Rim
Hand:
• Trim available
See
page
6,
Same
trim
as
XX-R-EO
4´functions
565built
Flush
3 ⁄ ˝ (Exit Only)
2´6˝ device.
up to For
3´10˝
Deadlocking
Latchbolt:
Standard.
Functions:
All
into “EO”
K or L trim, add
2´6˝onispages
upproduced
to 16
3´11˝
565See Trim Selection
3 ⁄ ˝ Device
3755
K
hub.
Chart
and
17.
Functions:
to
meet
the
18 series Latch Retention
top latch.
Han
XX-R-EO Hold: 4´ Standard
565with
Flush
to 3´10˝
F570/F490
4˝ 3 ⁄ ˝ 2´6˝2´6˝
up toup4´0˝
US3 (605);
US4
(606);
US10standard.
(612);US10B
(613);
⁄ ˝ 2´6˝No
2´6˝
toUS26
3´11˝(625);
565
Dogging
Feature:
⁄ 579
turn
hex
dogging
threaded
parts
to wear of
out.
Function
requirements
• Finishes: US3, 10B
andFinishes:
32D
up
toup
3´10˝
3 ⁄ ˝ 3demanding
US26D (626);F570/F490
US32 (629); US32D
(630).
Finishes:
4˝
2´6˝ up to 4´0˝
Cylinder
Dogging:
Specify579
˝CD˝ prefix, uses
trafficup installations.
This
• Lengths: 48” stock;
canStrikes:
be
cut F570
down
⁄ ˝ rim cylinder.
2´6˝
to 3´10˝
3higher
adjustable
strike standard.
Finishe
Stock Sizes:
4´0˝571A,
standard.
is a single point, rim type
565, 571,
579, F490 device
strike optional.
• Cross Bars: 1” OD
Strikes:
Doors:
1
⁄
˝
thick,
wood
or
metal.
Specify
thickness
if
other
than
1
⁄
˝.
Forgeddogged
brass, aluminum and latch
investment
stainless
steel.
withcastthe
traditional
crossbar
• Projections: 5” Maximum;Arms:
4” when
Strike
Projection:
maximum,
dogged.
Arms:
Crossbars:
1˝ O.D.,5˝
brass,
bronze4˝
and
stainless
steel.
design.
• ANSI A156.3-2001 Grade
1 standards
3
1
3
1
1
2
1
4
4
1
3
2
1
3
Note: See page 15 for additional strike information.
Approximate. See appropriate templates.
2
4
4
4
2
4
3
4
Reinforced
Stile:
23⁄4˝crossbars
minimumavailable.
when used in pairs.
Crossbars:
Arm
Note:
See
page
15
for
additional
Latchbolt:
Stainless
steel,
⁄4"strike
throw.information.
Electric Function:
Can
be 3interfaced
with building security systems. Lock/unlock and
Crossbar
Approximate.
Seefor
appropriate
security
available. (See separate electrical brochure.)
Latchbolt:
DeadlockingNote:
Latchbolt:
Specifymonitoring
˝DL˝templates.
prefix.
See pageOptional.
15
additional
strike
information.
1
Fasteners:
All mounting
screws
areNoconcealed.
metal
Approximate.
appropriate
templates.
Latchbo
Dogging Feature:
⁄2 turnSee
hex
dogging
standard.
threaded Sheet
parts to
wearscrews
out. standard.Deadlocking Latchbolt:
Machine screws available, specify AMS.
Dogging Feature:
Deadlocking
Latchbo
Cylinder Dogging: Specify ˝CD˝ prefix. Uses rim cylinder (supplied).
Sex Bolts:
When device is used with hollow core, composite or light gage
Cylinder
Dogging:
Dogging
Featur
Stock Sizes: 4´0˝ standard.
Hollow Metal, specify 14-#2729 SNB. When used with
3
Stock Doggin
Sizes:
through-bolted
trim,
deduct
4 SNB. if other than 13⁄4˝.
Cylinder
Doors: 1 ⁄4˝ thick,
wood or metal.
Specify
thickness
Doors:
ANSI:
Certified
ANSI A156.3-2001 Grade 1 standards.
Stock
Size
Projection:
5˝ maximum;
4˝ dogged.
1
Projection:
XX-V:
Latch
retention
latch
top.
3788
strike
top,
bottom
bolt
2130
flush
Door
Mounting Height: 40 ⁄4˝ from CL to finished floor.
bottom.
Mounting Projectio
Height:
Electric Function: Can be strike
interfaced
with building security systems. Lock/unlock and
XX-V-LBR:
bottom available.
rod vertical
device.
securityLess
monitoring
(See
separate electrical brochure.)
Electric
Function:
Mounting
Heigh
• Part number XXVEO
X finish
Vertical
Rods:
Furnish
to length
based on aSheet
401⁄4˝metal
horizontal
from finished floor,
Fasteners:
All mounting
screws
are concealed.
screwsCLstandard.
Electric Functio
a 7´0˝
door standard.
Variations from these standards must be
screws
available,
specify AMS.
Fasteners:
• Handed: Specify LHR or RHRMachineand
specified
when
ordering.
Sex Bolts: When device
is used
with
hollow core wood, composite or
Fastener
• Trim available; See page 6, same
trimHollow
as 18Metal
series
light gauge
doors, specify 8-#2729 SNB when
Sex Bolts:
XX series - Vertical Rod Device
• Finishes: US3, 10B, 32D
through-bolted trims is used, specify 4-#2729 SNB.
ANSI: Certified ANSI A156.3-2001 Grade 1 standards.
Double Cylinder: ANSI functions 07 and 10, specify TP2, K2 or L2.
Double Outside Cylinder: ANSI functions 07 and 10 with both cylinders on outside.
Sex Bolt
ANSI:
Double Cylinder:
ANS
Double Outside
Cylinder:
Double
Cylinde
The Monarch XX-V Series Vertical
Rod Device is designed to meet the
Specify TP(2 O.C.), K(2 O.C.) or L(2 O.C.).
demanding
requirements
of
higher
installations.The
XX-V
is
Center Case & Working Parts: Center traffic
case is pressure
die cast aluminum
with device
heavy wrought,
Double Outside Cylinde
forged, investment
cast and
sintered
Center Case & Working Parts:
a surface-applied (including strikes)
vertical rod
type
withmetal
the parts.
traditional
crossbar design.
Center Case & Working Part
2130 Strike
8
20
American Building Supply, Inc. 2/17
ABS-AMERICAN BUILDING SUPPLY, INC.
XX - Trim Designs
Falcon - Exits
All Trims Supplied Less Cylinder
812L Trim
812L Dane
Rim Cylinder Required
812L Quantum
Rim Cylinder Required
812L BE Dane
Specify:
812LR - Rim
812LV - Vertical
Stocked Product
10B, 32D
US3 DANE ENTRY
820 NL Vanguard and Trim
Rim Cylinder Required
Stocked Product
10B, 32D
2/17 American Building Supply, Inc. 21
ABS-AMERICAN BUILDING SUPPLY, INC.
Falcon
19, 25, and XX Accessories and Options
Removable Mullion
•
•
•
•
•
•
•
The F4023, KRF-4023 and KR-4023 steel mullions are for use with the 19-R, 25-R, and XX-R devices
on double door openings. Advantage: Increased security and tighter closure. Minimizes door warpage
and sag. Regulates the flow of in-and-out traffic.
Falcon removable mullions are easily removed and reinstalled for full width access.
Rim devices are used on both leaves, attaining a perfectly symmetrical opening.
The mullion assembly consists of a mullion, top and bottom mounting brackets and a screw pack.
The F4023 and KRF-4023 fire-rated mullions also include four stabilizer blocks as required for labeled
installations.
Mullions may be cut on the job for doors under stock lengths.
KR Mullions require 11⁄4” mortise cylinder with standard A cam.
Features
•
•
•
•
•
Mullion fittings – ductile iron.
F4023, 4023, KRF-4023 and KR-4023– 2” x 3” x height.
2923 mullion - 1-1/2’ x 2-1/2’ x height.
SP28
7’ or 8’ door opening standard, other door opening as specified.
Cylinders
• Cylinder supplied only when specified.
• Cylinders keyed different unless specified keyed alike.
Sex Bolts
• 325 (1⁄4”-20 Thread)
• 425 (#10-24 Thread)
DOUBLE DOOR APPLICATION
Strike Installed With Min. Stile B *
299 2923 mullion 4 1⁄8” 3”
299 4023 mullion 4 3⁄8” 3 1⁄4”
299-F F-4023 mullion 4 3⁄8” 3 1⁄4”
499-F F-4023 mullion 4 1⁄2” 3 5⁄16”
264 2923 mullion 4” 2 7⁄8”
264 4023 mullion 4 1⁄4” 3 1⁄8”
1439 2923 mullion 3 7⁄8” 2 3⁄4”
1439 4023 mullion 4 1⁄8” 3”
1606 2923 mullion 4 1⁄4” 2 5⁄8”
1606 4023 mullion 4 1⁄2” 2 7⁄8”
1609 Surface 25-V 4” 2 3⁄8”
*Backset to vertical center line on the device.
Stocked Product
4023,F4023
7’2” & 8’0” SP28
KR4023,KRF4023 7’2” & 8’0” SP28
22
American Building Supply, Inc. 2/17
ABS-AMERICAN BUILDING SUPPLY, INC.
Falcon
8200 Series - Low Energy Operator
Designed to fit perfectly.
The small footprint and elegant design of the
Falcon 8200 Series make it a perfect solution for
a range of applications.
• Assisted living • Hospitality
• Retail • Small office
• Restaurants. • Ambulatory care
Features:
Stocked Product
8231 Pull side operation
8242 Push side operation
Finish: aluminum
2/17 American Building Supply, Inc. 23
ABS-AMERICAN BUILDING SUPPLY, INC.
Dor-O-Matic by Falcon - Closers
SC61 Series - Light to Medium Duty Closer
Features:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Meets ANSI A1117.1
ANSI/BHMA A156.4, Grade 1
UL Listed
1-3/8” diameter piston
Closer mounts hinge side, top jamb or parrallel arm when either the
Rw/PA or Hw/PA arm is specified.
Adjustable sizes 1-4
Single piece cast aliminum body
Staked valves
Non-handed left or right swinging doors
Separate adjustable general speed, latch speed, and backcheck
Heat-treated steel piston
Heat-treated pinion
UL 10C approved fluid
Stocked Product
Universal screw pack
SC61
Aluminum, Dark Bronze
10-year warranty
SC80 Series - Medium Duty Closer
Features:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Meets A156.4, Grade 1 Standard
1-3/8” diameter piston
Ready to mount hinge side, top jamb or parrallel arm
configurations
Arm options: regular
Suitable for interior doors up to 48” (1219 mm) wide, exterior
doors up to 36” (914 mm) and can be adjusted to meet the ADA
accessability requirements
Single piece cast aliminum body
Staked valves
Non-handed left or right swinging doors
Separate adjustable general speed, latch speed, and backcheck
Heat-treated steel piston
Heat-treated pinion
Cover is high-impact UL listed fire retardant plastic that meets UL
10C and UBC-7-2 (1997) fire test
UL 10C approved fluid
Universal screw pack
10-year warranty
Stocked Product
SC81
24
American Building Supply, Inc. 2/17
Aluminum, Dark Bronze
ABS-AMERICAN BUILDING SUPPLY, INC.
Dor-O-Matic by Falcon - Closers
SC90 Series - Light Duty Closer
Features:
•
•
•
•
•
•
•
•
•
•
•
Meets A156.4, Grade 1
Ready to mount hinge side, top jamb or parrallel arm configurations
Arm options: regular
Single piece cast aliminum body
Non-handed left or right swinging doors
Separate adjustable general speed and latch speed
Heat-treated steel piston
Heat-treated pinion
UL 10C approved fluid
Stocked Product
Universal screw pack
SC91
Aluminum, Dark Bronze
10-year warranty
8310-844 - Series
Transmission Kit
Falcon - Actuators
8310-856T - Series
Round Surface 4-1/2”
Actuator
8310-865 - Series
Wireless Receiver
8310-868S - Series
4-1/2” Box only
2/17 American Building Supply, Inc. 25
ABS-AMERICAN BUILDING SUPPLY, INC.
26
American Building Supply, Inc. 2/17