Introducing
MIRRORED FLUSH DOORS
reflect excellence
four options to choose from
Mirrored Flat Panel - Offering a similar appearance as other flat panel flush doors, the
mirrored panel is secured into a cutout with beads. One or both surfaces can be mirrors.
Flush Mirror - The clean and modern appearance of this design has the mirror bonded
into a mortise within the face. Available on one or both faces of the door.
Recessed Mirror - If you are looking for a flat panel design on one face and a mirror on
the other - this option is for you. The mirror will be installed in a deeper face mortise and
secured with mastic and/or glazing bead. Available on one face.
Surface-Applied Mirror - This option has the mirror bonded to the face of the door and
then secured around its perimeter with overlapping applied molding. It is the most costeffective option we offer. Please note that the mirror and molding will project from the
face of the door. Available on one or both faces.
** All mirrored flush doors are non-rated and require structural composite lumber (SCL)
core construction.
ENGINEERING SPECIFICATIONS MIRRORED Flush Doors
Non-Rated
Max. Size
4’ x 10’ (per leaf)
Thickness
1-3/4” - 2-1/4”
Core
Max. Door & Transom
Non-Rabbetted
Structural Composite Lumber (SCL)
4’ x 14’ with or without a transom bar or rabbeted
Stiles
Veneered structural composite lumber, solid lumber edges available upon request
Rails
No-rail construction is standard for SCL
Faces
All available domestic and foreign veneers, medium density overlay (MDO), and high pressure laminates and vinyl.
Crossbands
1/11” high density fiberboard
Mirror Specifications
Mirrors are 1/4” with safety film
Latching Hardware
Most available latching hardware
Hinges
Flushbolts
Fire Exit Hardware
Closers, Stops, Holders
Drop Seals
Special Details
Finish
Per NFPA 80 - butts, pocket pivots, continuous hinges, pivots (electrical options available)
Corner or extension bolts up to 48”
Rim, surface and concealed vertical rod (full or top rod only)
Listed surface hardware or concealed hardware having mortise 1-3/8” wide
Listed and approved surface, semi-mortised or mortised
Machining for hardware; applied moulding; ; kickplates; raceways
UV-cured, primed, painted (MDO only), sealer, full sealer, catalyzed polyurethane, and opaque varnish
Warranty
Life of installation (interior)
Standards
WDMA I.S. 1A, AWS Section 9 Edition 2, NFPA 252, UL 10B, UL 10C, NFPA 80
[email protected]
www.eggersindustries.com
Stile & Rail Doors,
Door Frames, Plywood
Veneered Components
Flush Doors
Architectural Veneer Faces,
Custom Wood Products,
Plywood
Two Rivers Division
One Eggers Drive
Two Rivers, WI 54241
Phone: 920.793.1351
Fax: 920.793.2958
Kentucky Division
2125 Lake Jericho Road
Smithfield, KY 40068
Phone: 502.845.0154
Fax: 502.845.0615
Neenah Division
164 North Lake Street
Neenah, WI. 54956
Phone: 920.722.6444
Fax: 920. 722.0357