13_ldprof_B.fm Seite 159 Donnerstag, 9. August 2001 11:10 11
PAN- WAY ™ LD PROFILE NON-METALLIC PERIMETER TRUNKING
Type LD2P10
Type LD
Type LDP
Type LDP
PANDUIT NETWORK CONNECTIVITY GROUP Cable Routing Solutions.
LD Profile single and multi-channel trunkings provide solutions for routing low voltage, fibre optic
and power cabling along fixed perimeter walls. LD Profile trunkings have available Standard, 25mm
Bend Radius Control, Power Rated Bend Radius Control and Multi-Channel Bend Radius Control
Fittings. LD Profile trunkings are compatible with PAN-WAY Surface Mount Outlet Boxes and most
MINI-COM ™ Surface Mount Boxes.
LD Profile Trunking:
Type LD2P
One-piece multi-channel design routes power and low voltage and fibre optic cabling within the
same trunking. Extremely tamper resistant latch design excellent for school and university
applications. Full complement of divided fittings, boxes and faceplates. Available in one size: 10.
Type LDP
One-piece single channel design for power, low voltage or fibre optic applications. Extremely
tamper resistant latch design excellent for school and university applications. Accessible for moves
adds and changes by the qualified installer. Available in three sizes: 3, 5, 10.
Type LD
One-piece single channel design for low voltage applications only. Quick release latch for easy
moves, adds and changes. Wires are laid in instead of pulled through for quick & easy installations.
Available in three sizes: 3, 5, 10.
Sold exclusively through authorized PANDUIT distributors.
CYAN
MAGENTA
YELLOW
BLACK
■ ■ ■ ■ ■ ■ ■ ■ Seite: 159 - Datum: 8/9/01
159
13_ldprof_B.fm Seite 160 Donnerstag, 9. August 2001 11:10 11
PAN- WAY ™ Type LD2P Multi-Channel Perimeter Trunking
PAN-WAY Type LD2P Perimeter Trunking is a two channel trunking designed to
route, protect and conceal data, voice, video, fibre-optic and power cabling.
Type LD2P Trunking Benefits:
• Routes Power & Data together!
• Tamper resistant latch for School & University applications
• One-piece hinged design allows cables to be laid in
• Factory applied adhesive backing speeds installation
Part
Number
Std.
Ctn.
Qty.
Part
Number
Std.
Ctn.
Qty.
Colours‡
40m
3m lengths
LD2P10AW3-A
60m
Arctic White
LD2P10—Perimeter
Trunking
2m lengths
LD2P10AW2-A
LD2P10
Two channel tamper resistant one-piece latching perimeter trunking. Supplied with pre-applied
adhesive backed tape.
LD2P10
A=277
A=323
NOTE: LD2P Trunking requires screw mounting if it is being used for power cabling applications
‡All parts listed in AW (Arctic White) colour. To order other colours substitute IW (International White) or
WH (White).
22
mm
ORDERING INFORMATION:
Order number of meters required, in multiples of Standard Carton Quantity.
38mm
See page 162 for LDW10-V Installation Tool.
Fittings for Multi-Channel Applications
CFX
OCFX
ECFX
ICFX
RAFX
Part
Number
CFX10AW-X
Description
Coupler Fitting
ICFX10AW-X
Inside Corner Fitting
OCFX10AW-X
Outside Corner Fitting
RAFX10AW-X
Right Angle Fitting
ECFX10AW-X
End Cap Fitting
TFXD10AW-X
Tee Fitting with Divided Insert
EEFXAW
Entrance End Fitting
Colors‡
Arctic
White
Arctic
White
Arctic
White
Arctic
White
Arctic
White
Arctic
White
Arctic
White
Std.
Pkg.
Qty.
10
pcs.
10
pcs.
10
pcs.
10
pcs.
10
pcs.
10
pcs.
1
pc.
Std.
Ctn.
Qty.
100
pcs.
100
pcs.
100
pcs.
100
pcs.
100
pcs.
100
pcs.
10
pcs.
‡All parts listed in AW (Arctic White) colour. To order other colours substitute IW (International White) or
WH (White).
TFXD
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
Maintains TIA/EIA 568-A and 569-A
minimum 25mm cable bend radius
EEFX
160
CYAN
Prime Items appear in BOLD.
MAGENTA
YELLOW
BLACK
■ ■ ■ ■ ■ ■ ■ ■ Seite: 160 - Datum: 8/9/01
13_ldprof_B.fm Seite 161 Donnerstag, 9. August 2001 11:10 11
PAN- WAY ™ PERIMETER TRUNKING SYSTEMS
PAN- WAY Type LD Perimeter Trunking
PAN- WAY Type LD Perimeter Trunking is a single channel trunking
designed to route, protect and conceal data, voice and video cabling.
Type LD Trunking Benefits:
• One-piece hinged design allows cables to be laid in
• Factory applied adhesive backing speeds installation
A=135mm2
12mm
LD3
Part
Number
Std.
Ctn.
Qty.
Part
Number
Std.
Ctn.
Qty.
Colors‡
40m
LD3AW3-A
60m
Arctic White
40m
LD5AW3-A
60m
Arctic White
40m
3m lengths
LD10AW3-A
60m
Arctic White
LD3—Perimeter Trunking
20mm
2m lengths
LD3
LD3AW2-A
3m lengths
LD5—Perimeter Trunking
A=248mm2
LD5
2m lengths
15mm
LD5AW2-A
3m lengths
LD10—Perimeter Trunking
26mm
2m lengths
LD10AW2-A
LD5
One-piece latching perimeter trunking. Supplied with pre-applied adhesive backed tape.
‡All parts listed in AW (Arctic White) colour. To order other colours substitute IW (International White) or
WH (White).
A=645mm2
ORDERING INFORMATION:
24mm Order number of meters required, in multiples of Standard Carton Quantity.
LD10
See page 163 for fittings.
38mm
LD10
PAN- WAY Perimeter Trunking Cutting Tool
Part
Number
Description
Std.
Pkg.
Qty.
Perimeter Trunking Cutting Tool
SRT
Used to easily cut all sizes of Types LDP, LD2P, and LD
Trunking. Leaves a clean, burr-free end on trunking. Can also
be used to cut plastic.
5 pcs.
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
• Rugged, ratchet-action tool cuts
perimeter trunking
For Technical Assistance, refer to inside back cover for your local PANDUIT ™ Sales Office.
CYAN
MAGENTA
YELLOW
BLACK
■ ■ ■ ■ ■ ■ ■ ■ Seite: 161 - Datum: 8/9/01
161
13_ldprof_B.fm Seite 162 Donnerstag, 9. August 2001 11:10 11
PAN- WAY ™ Type LDP Perimeter Trunking
PAN- WAY Type LDP Perimeter Trunking is a single channel
trunking designed to route, protect and conceal data, voice, video,
fibre-optic or power cabling.
Type LDP Trunking Benefits:
• Tamper resistant latch for School & University applications
• One-piece hinged design allows cables to be laid in
• Factory applied adhesive backing speeds installation
A=143mm2
12mm
LDP3
LDP3
Std.
Ctn.
Qty.
Part
Number
Part
Number
2m lengths
20mm
Std.
Ctn.
Qty.
Colours‡
3m lengths
LDP3—Perimeter Trunking
LDP3AW2-A
A=245mm2
LDP5
40m
LDP3AW3-A
60m
Arctic White
40m
LDP5AW3-A
60m
Arctic White
40m
LDP10AW3-A
60m
Arctic White
LDP5—Perimeter Trunking
18mm
LDP5AW2-A
LDP10—Perimeter Trunking
25mm
LDP10AW2-A
LDP5
Tamper resistant one-piece latching perimeter trunking. Supplied with pre-applied adhesive
backed tape.
A=632mm2
LDP10
NOTE: LDP Trunking requires screw mounting if it is being used for power cabling applications.
‡All parts listed in AW (Arctic White) colour. To order other colours substitute IW (International White) or
22mm WH (White).
38mm
ORDERING INFORMATION:
Order number of meters required, in multiples of Standard Carton Quantity.
See page 163 for fittings.
LDP10
LD/LDP/LD2P Trunking Installation Tool
Part
Number
Std.
Pkg.
Qty.
Description
Std.
Ctn.
Qty.
LDP Trunking Installation Tool
LDW3-V
LDW5-V
LDW10-V
Optional installation tool for use with
Type LD3/LDP3 trunkings.
Optional installation tool for use with
Type LD5/LDP5 trunkings.
Optional installation tool for use with
Type LD10/LDP10/LD2P10 trunkings.
Serves as guide for
5 pcs. 50 pcs.
drill bit in screw mount
applications. Holds
5 pcs. 50 pcs.
LD/LDP/LD2P
trunking cover open
5 pcs. 50 pcs.
during installation
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
Optional Mounting Method
Trunking mounts easily to smooth, clean interior surfaces, however, not all surfaces are suitable for adhesive mounting. In these applications,
use the foam tape as a temporary mounting means. Insert the trunking installation tool to facilitate screw installation.
162
CYAN
Prime Items appear in BOLD.
MAGENTA
YELLOW
BLACK
■ ■ ■ ■ ■ ■ ■ ■ Seite: 162 - Datum: 8/9/01
13_ldprof_B.fm Seite 163 Donnerstag, 9. August 2001 11:10 11
PAN- WAY ™ PERIMETER TRUNKING SYSTEMS
Standard Fittings for LV Applications
CF
OCF
ECF
ICF
RAF
TF
Description
Part
Number
Size 3
Coupler Fitting
CF3AW-E
Inside Corner
Fitting
Outside Corner
Fitting
Right Angle
Fitting
End Cap Fitting
ICF3AW-E
Tee Fitting
TF3AW-E
Drop Ceiling/
Entrance End
Reducer Fitting
DCF3AW-X
OCF3AW-E
RAF3AW-E
ECF3AW-E
RF5X3AW-E
Std.
Pkg. Part
Qty. Number
Size 5
Std.
Std.
Std.
Pkg. Part
Pkg.
Ctn.
Qty. Number
Qty. Colours‡ Qty.
Size 10
20
pcs.
20
pcs.
20
pcs.
20
pcs.
20
pcs.
20
pcs.
20
pcs.
20
pcs.
20
pcs.
20
pcs.
20
pcs.
20
pcs.
20
pcs.
20
pcs.
10
pcs.
10
pcs.
CF5AW-E
ICF5AW-E
OCF5AW-E
RAF5AW-E
ECF5AW-E
TF5AW-E
DCF5AW-X
RF10X5AW-X
CF10AW-X
ICF10AW-X
OCF10AW-X
RAF10AW-X
ECF10AW-X
TF10AW-X
DCF10AW-X
RF10X3AW-X
10
pcs.
10
pcs.
10
pcs.
10
pcs.
10
pcs.
10
pcs.
10
pcs.
10
pcs.
Arctic
White
Arctic
White
Arctic
White
Arctic
White
Arctic
White
Arctic
White
Arctic
White
Arctic
White
100
pcs.
100
pcs.
100
pcs.
100
pcs.
100
pcs.
100
pcs.
100
pcs.
100
pcs.
‡ All parts listed in Arctic White (AW) colour. To order other colours substitute IW (Off White) or IG (Light Grey).
DCF
Maintains TIA/EIA 568-A and 569-A
minimum 25mm cable bend radius
RF
Bend Radius Control Fittings
CFX
OCFX
ECFX
DCEFX
Description
Part
Number
Coupler Fitting
Size 3
CFX3AW-X
ICFC
RAFC
TFC
Inside Corner
—Cover Only
Inside Corner
—Base & Cover
Outside Corner
—Base & Cover
Right Angle
—Cover Only
Right Angle
—Base & Cover
End Cap Fitting
ICFC3AW-X
Tee Fitting
—Cover only
Tee Fitting
TFC3AW-X
ICFX3AW-X
OCFX3AW-X
RAFC3AW-X
RAFX3AW-X
ECFX3AW-X
TFX3AW-X
Drop Ceiling/
DCEFXAW-X
Entrance End*
Right Angle
RAEFXAW-X
Entrance End*
Reducer Fitting RFX53AW-X
RAEFX
Std.
Pkg. Part
Qty. Number
10
pcs.
10
pcs.
10
pcs.
10
pcs.
10
pcs.
10
pcs.
10
pcs.
10
pcs.
10
pcs.
10
pcs.
10
pcs.
10
pcs.
Size 5
CFX5AW-X
Std.
Pkg. Part
Qty. Number
10
pcs.
ICFC5AW-X
10
pcs.
ICFX5AW-X
10
pcs.
OCFX5AW-X 10
pcs.
RAFC5AW-X
10
pcs.
RAFX5AW-X
10
pcs.
ECFX5AW-X
10
pcs.
TFC5AW-X
10
pcs.
TFX5AW-X
10
pcs.
DCEFXAW-X 10
pcs.
RAEFXAW-X 10
pcs.
RFX105AW-X 10
pcs.
Size 10
CFX10AW-X
ICFC10AW-X
ICFX10AW-X
OCFX10AW-X
RAFC10AW-X
RAFX10AW-X
ECFX10AW-X
TFC10AW-X
TFX10AW-X
DCEFXAW-X
RAEFXAW-X
RFX103AW-X
Std.
Std.
Pkg.
Ctn.
Qty. Colour‡ Qty.
10
pcs.
10
pcs.
10
pcs.
10
pcs.
10
pcs.
10
pcs.
10
pcs.
10
pcs.
10
pcs.
10
pcs.
10
pcs.
10
pcs.
Arctic
White
Arctic
White
Arctic
White
Arctic
White
Arctic
White
Arctic
White
Arctic
White
Arctic
White
Arctic
White
Arctic
White
Arctic
White
Arctic
White
100
pcs.
100
pcs.
100
pcs.
100
pcs.
100
pcs.
100
pcs.
100
pcs.
100
pcs.
100
pcs.
100
pcs.
100
pcs.
100
pcs.
‡ All parts listed in Arctic White (AW) colour. To order other colours substitute IW (Off White) or IG (Light Grey).
*To mate to LDP3 use CA3 adapter. To mate to LDP5 use CA5 adapter. Adapters shown Page 166.
Maintains TIA/EIA 568-A and 569-A
minimum 25mm cable bend radius
RFX
For Technical Assistance, refer to inside back cover for your local PANDUIT ™ Sales Office.
CYAN
MAGENTA
YELLOW
BLACK
■ ■ ■ ■ ■ ■ ■ ■ Seite: 163 - Datum: 8/9/01
163
13_ldprof_B.fm Seite 164 Donnerstag, 9. August 2001 11:10 11
Quick Wirefill Capacities for LD Profile Trunkings
This information is to be used as a guide in selecting the proper size trunking. The maximum amounts may vary
according to the wire installation methods, straightness of wires, etc.
LDP
LD 2P
LD2P10-Left LD2P10-Right
283mm2
LDP3
LD
LDP5
LDP10
LD3
137mm2 248mm2 631mm2
325mm2
SPEC=40% wirefill—the recommended design in cable capacity.
Leaves room for future moves, adds and changes
LD5
LD10
136mm2 244mm2 643mm2
MAX for Data=60% wirefill—the maximum cable quantity based
on cable interweaving and packing factors
MAX for Power= maximum number of electrical cables based on
UL temperature rise test data
CABLE DIAMETER (mm)
1
Trunking Channel
Wirefill Configurations
Fill Area 50%
(mm2) FILL
2
3
4
5
6
7
8
9
50%
FILL
50%
FILL
50%
FILL
50%
FILL
50%
FILL
50%
FILL
50%
FILL
50%
FILL
10
50%
FILL
LD2P10-Left Channel
283
180
45
20
11
7
5
3
2
2
1
LD2P10-Right Channel
325
207
51
23
12
8
5
4
3
2
2
LD3
136
86
21
9
5
3
2
1
1
*
*
LD5
244
155
38
17
9
6
4
3
2
1
1
LD10
643
409
102
45
25
16
11
8
6
5
4
LDP3
137
87
21
9
5
3
2
1
*
*
*
LDP5
248
157
39
17
9
6
4
3
2
1
*
LDP10
631
401
100
44
25
16
11
8
6
4
4
** Not power configuration
Trunking Channel
Wirefill Configurations
11
Fill Area 50%
(mm2) FILL
12
50%
FILL
CABLE DIAMETER (mm)
13
14
15
16
17
50% 50% 50% 50% 50%
FILL FILL FILL FILL FILL
18
50%
FILL
19
50%
FILL
LD2P10-Left Channel
283
1
1
1
*
*
*
*
*
*
LD2P10-Right Channel
325
1
1
1
1
*
*
*
*
*
LD3
136
*
*
*
*
*
*
*
*
*
LD5
244
*
*
*
*
*
*
*
*
*
LD10
643
3
2
2
2
1
1
1
1
1
LDP3
137
*
*
*
*
*
*
*
*
*
LDP5
248
*
*
*
*
*
*
*
*
*
LDP10
631
3
2
2
2
1
1
1
1
1
** Not power configuration
164
CYAN
Prime Items appear in BOLD.
MAGENTA
YELLOW
BLACK
■ ■ ■ ■ ■ ■ ■ ■ Seite: 164 - Datum: 8/9/01
13_ldprof_B.fm Seite 165 Donnerstag, 9. August 2001 11:10 11
PAN- WAY ™ PERIMETER TRUNKING SYSTEMS
NEW!
PAN-WAY FAST- SNAP ™ Surface Mount Outlet Boxes
Part
Number
Description
Std.
Pkg.
Qty.
Colour‡
Std.
Ctn.
Qty.
FAST-SNAP Single Gang Low Voltage Surface Mount Outlet Box
JB1FSAW-A
JB1FS**-A
Accepts
Snap-On
Faceplates!
Single gang snap-together cover and base with
adhesive backing. Accepts PAN-WAY Snap-on
faceplates for data applications (See pages 154-156).
L=127.1mm W=82.7mm H=41.1mm Conduit
breakouts: 25mm, 19mm, 12mm
Arctic
White
1 pc. 10 pcs.
Arctic
White
1 pc. 10 pcs.
FAST-SNAP Double Gang Power Rated Surface Mount Outlet Box
JBP2FSAW
Accepts
Snap-On
Faceplates!
Double gang snap-together cover, base, and divider
wall. Accepts PAN-WAY Snap-On faceplates for
power and data applications (See pages 154-156).
L=127.1mm W=155.9mm H=41.1mm Conduit
breakouts: 25mm, 19mm, 12mm
‡ For other colours replace AW (Arctic White) with IW (International White), IG (International Grey), and WH (White).
NOTE: See Selection Chart on page 167 for detailed information on specific usage with trunkings.
JBP2FS
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
PAN-WAY Power Rated Surface Mount Outlet Boxes
NEW Design!
Part
Number
Description
Std.
Pkg
Qty.
Std.
Ctn.
Qty.
Arctic
White
1
10
Arctic
White
1
10
Colour‡
P
Jower Rated Single Gang Two-Piece Box
JBP1AW
JBP1
Single Gang Box—base and cover.
L=131.9mm W=87.7mm H=44.4mm Conduit
Breakouts: 25mm, 19mm, 12mm
JDouble Gang Two-Piece Box
JBP2AW
Double gang box-base and cover (screws included.)
L=128.2mm W=128.2mm H=41.1mm
Conduit Breakouts:19mm, 12mm
‡ For other colors replace AW (Arctic White) with IW (International White), IG (International Grey) and WH (White).
NOTE: See Selection Chart on page 167 for detailed information on specific usage with trunkings.
JBP2
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
PAN-WAY Surface Mount Outlet Box with 20A Electrical Outlet
NEW!
Part
Number
Description
Colour‡
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Arctic White
1
10
Arctic White
1
10
J20A Rectangular Low Profile Box with 20A Electrical Outlet
JBP1MR20AW
Two-Piece power rated low profile. Supplied with
20A U.S. style rectangular outlet.
J20A 106 Duplex Low Profile Box with 20A Electrical Outlet
JBP1MR20
JBP1MD20AW
NEW!
Two-Piece power rated low profile. Supplied with
20A U.S. style 106 duplex electrical outlet.
‡ For other colour replace AW (Arctic White) with EI (Electrical Ivory).
NOTE: See Selection Chart on page 167 for detailed information on specific usage with trunkings.
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
JBP1MD20
For Technical Assistance, refer to inside back cover for your local PANDUIT ™ Sales Office.
CYAN
MAGENTA
YELLOW
BLACK
■ ■ ■ ■ ■ ■ ■ ■ Seite: 165 - Datum: 8/9/01
165
13_ldprof_B.fm Seite 166 Donnerstag, 9. August 2001 11:10 11
PAN-WAY ™ Divided Surface Mount Outlet Boxes
Part
Number
Description
Colour‡
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Power Rated Single Gang Two-Piece Deep Box
JBP1DAW
Single Gang Deep Box-base and cover.
L=131.9mm W=87.7mm H=69.9mm Conduit
Breakouts: 25mm, 19mm, 12mm
Arctic
White
1 pc. 10 pcs.
—
1 pc. 10 pcs.
Arctic
White
1 pc. 10 pcs.
Arctic
White
1 pc. 10 pcs.
—
1 pc. 10 pcs.
JSingle Gang Pass Through Divider for LD2P10 Trunking
JBD1
JBP1D
JBD1
Pass through divider allows power &
communications outlets to be routed in series.
Used with JBP1D. Must use with LD2P10 Trunking.
L=126.7mm W=82.5mm H=22.6mm
Power Rated Double Gang Three-Piece Divided Box
JBP2SAW
JBP2S
JBP2D
Double Gang Box-base, cover, and divider wall for
power and data applications. (screws included).
L=128.2mm W=128.2mm H=41.1mm
Conduit Breakouts:12mm, 19mm
JPower Rated Single Gang Two-Piece Deep Box
JBP2DAW
Double Gang Box-base, cover, and divider wall
(screws included). L=131.9mm W=131.9mm
H=69.8mm
Conduit Breakouts: 25mm, 19mm, 12mm
JDouble Gang Pass Through and Divider for LD2P10 Trunking
JBD2
JBD2
Pass through divider allows power &
communication outlets to be routed in series. Used
with JBP2D. Must use with LD2P10 Trunking.
L=127.0mm W=127.0mm H=38.3mm
‡ For other colours replace AW (Arctic White) with IW (International White), IG (International Grey) and WH (White).
NOTE: See Selection Chart on page 167 for detailed information on specific usage with trunkings.
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
Trunking Adapters
Part
Number
Description
Colour‡
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Arctic
White
Arctic
White
10
pcs.
10
pcs.
100
pcs.
100
pcs.
JTrunking Adapters for LD Profile Trunkings
CA3AW-X
CA5AW-X
Fits into universal breakout of DCEFX or RAEFX
fittings. For use with types LDP3, LD3, trunkings.
Fits into universal breakout of DCEFX or RAEFX
fittings. For use with Types LDP5 and LD5 trunkings.
‡ For other colours replace AW (Arctic White) with IW (International White), IG (International Grey) and WH (White).
NOTE: See Selection Chart on page 167 for detailed information on specific usage with trunkings.
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
166
CYAN
Prime Items appear in BOLD.
MAGENTA
YELLOW
BLACK
■ ■ ■ ■ ■ ■ ■ ■ Seite: 166 - Datum: 8/9/01
13_ldprof_B.fm Seite 167 Donnerstag, 9. August 2001 11:10 11
PAN- WAY ™ PERIMETER TRUNKING SYSTEMS
Selection Chart for using PAN-WAY ™ Perimeter Trunkings with
PAN- WAY Surface Mount Outlet Boxes
How to use this chart:
1) Locate the desired PAN-WAY Trunking in the left column.
2) Locate the desired box in the top row.
B
3) Locate the intersecting space to see if they can be used together.
4) Colour indicates proper box breakout (or adapter for PD trunking).
PAN-WAY Outlet Boxes
Low Voltage or Fibre Optic ONLY
JB1, JB1D, JB1FS, JBX3510 RJBX3510
PAN-WAY
Fittings
Power, Low Voltage or Fibre Optic
JBP1
JBP1D
JBP1E
JBP1I
JBP2S, JBP2D,
JBP2FS, JBP2
JBP1MR20,
JBP1MD20
PRJBX36 PSJBX
RAEFX, DCEFX
Type LD (Low Voltage or Fibre Optic ONLY)
LD3
Y
Y
Y
Y
Y
Y
Y
N
N
Y
Y w/CA3
LD5
Y
Y
Y
Y
Y
Y
Y
N
N
Y
Y w/ CA5
LD10
Y
Y
Y
Y
Y
Y
Y
N
N
Y
Y
Type LDP (Power, Low Voltage or Fibre Optic)
LDP3
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y w/CA3
LDP5
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y w/ CA5
LDP10
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
N
N
Y
N
N
N
N
N
N
Y
N
N
N
N
Type LD2P10 (Power, Low Voltage or Fibre Optic)
LD2P10
N
N
N
Y w/JBD1
Type T45 (Power, Low Voltage or Fibre Optic)
T45
Y (JB1FS and JBX3510)
N
N
Y
Adapters
Breakout Schemes
T45
LD10, LDP10, LD2P10,
Adapter
LD5, LDP5
LD3, LDP3
LD
Adapters
CA3
CA5
CA3 & CA5 adapters found on page 166.
Adapters fit Universal Breakout.
LD10, LDP10, LD2P10
Universal Breakout
For Technical Assistance, refer to inside back cover for your local PANDUIT ™ Sales Office.
CYAN
MAGENTA
YELLOW
BLACK
■ ■ ■ ■ ■ ■ ■ ■ Seite: 167 - Datum: 8/9/01
167
13_ldprof_B.fm Seite 168 Donnerstag, 9. August 2001 11:10 11
Floor Guard
Part Number
Length
Overall Size
WxH
Wire Slot
Size
WxH
Colours
Std.
Pkg.
Qty.
FG1 – For single, twisted pair cables
• Routes cabling over carpet,
concrete or tile to prevent tripping
• Flexible vinyl material can be
easily cut to length
• Cables slip into slit on base
• Adhesive mounting tape
is supplied
FG1EI6-A
FG1BR6-A
FG1YL6-A
FG1BL6-A
FG1EI50-A
FG1BR50-A
FG1YL50-A
FG1BL50-A
1.8m
31.8 x 6.9
6.4 x 4.3
15.2m
Elec. Ivory
Brown
Safety Yellow
Black
Elec. Ivory
Brown
Safety Yellow
Black
1.8m
15.2m
FG3 – For multiple or larger cables
FG3EI6S-A
FG3BR6S-A
FG3YL6S-A
FG3BL6S-A
FG3EI50-A
FG3BR50-A
FG3YL50-A
FG3BL50-A
1.8m
62.0 x 12.0
17.2 x 7.1
15.2m
Elec. Ivory
Brown
Safety Yellow
Black
Elec. Ivory
Brown
Safety Yellow
Black
9.1m
15.2m
ORDERING INFORMATION:
Order number of meters required, in multiples Standard Package Quantity.
Note: Mounting tape is pre-applied only to FG3 in 1.8m. lengths.
168
CYAN
Prime Items appear in BOLD.
MAGENTA
YELLOW
BLACK
■ ■ ■ ■ ■ ■ ■ ■ Seite: 168 - Datum: 8/9/01