ISI KANDUNGAN
BIL
TAJUK
MUKASURAT
1
PENGHARGAAN
1
2
OBJEKTIF
2
3
BIOS INFORMATION
3
4
QUESTION
4-9
PENGHARGAAN
Assalamualaikum dan salam sejahtera diucapkan.Dengan rasa bersyukurnya, saya
telah berjaya menjalankan tugasan-tugasan dengan
lancarnya. Sepanjang tempoh
kerja khusus dan membuat laporan-laporan lab ini, saya ingin merakamkan ribuan terima
kasih kepada penyarah,Pn. YM Raja Aida Raja Shaharuddin kerana memberi tunjuk ajar
serta peluang kepada saya menghasilkan kertas kerja ini.
Tidak lupa juga diucapkan jutaan terima kasih kepada ibu-bapa,keluarga serta
kawan-kawan saya yang banyak memberi sokongan dalam menghasilkan kertas kerja ini.
Akhir sekali,penghargaan juga ditujukan kepada semua yang terlibat sama ada
secara langsung atau tidak langsung dalam membantu menjayakan kerja khusus dan
membuat laporan-laporan lab ini.
Page 1
OBJEKTIF
Matlamat laporan ini disediakan ialah untuk memenuhi tugasan dan kerja-kerja
lab dibawah kendalian pensyarah penyelenggaraan dan pemasangan sistem komputer
iaitu Pn Raja Aida Raja Shaharuddin.
Lab ini menjawab kepada persoalan berkenaan dengan sistem BIOS.Setiap
jawapan disertakan sekali gambar-gambar berkaitan untuk mengemaskan lagi lab ini
supaya mudah diikuti dan difahami.
Kerja khusus penyelenggaraan ini memberi sedikit sebanyak pengetahuan asas
berkaitan sistem BIOS serta pelajar dapat mengenali dan memahami cara-cara
bagaimana hendak mengubah utiliti-utiliti yang terkandung didalam sistem BIOS tersebut.
Page 2
Computer Maintenance - BIOS
Lab 3: Getting into the BIOS
Information retrieved from “howstuffworks.com”
Student Name: Mohd Fauzi Bin Harun
matric no: DX085210DCD04
To enter the CMOS Setup, you must press a certain key, or combination of keys, during
the initial startup sequence. Most systems use "Esc," "Del," "F1," "F2," "Ctrl-Esc," or
"Ctrl-Alt-Esc" to enter the setup. There is usually a line of text at the bottom of the
display that tells you to "Press ___ to Enter Setup."
Once you have entered the setup, you will see a set of text screens with a number of
options. Some of these are standard, while others vary according to the BIOS
manufacturer. Common options include:
System Time/Date – Set the system time and date.
Boot Sequence – The order in which the BIOS will try to load the operating
system
Plug and Play – A standard for auto-detecting connected devices; it should be
set to "Yes" if your computer and operating system both support it.
Mouse/Keyboard – "Enable Num Lock," "Enable the Keyboard," "Auto-Detect
Mouse"...
Drive Configuration – Configure hard drives, CD-ROM, and floppy drives.
Memory – Direct the BIOS to shadow to a specific memory address.
Security – Set a password for accessing the computer.
Power Management – Select whether to use power management, as well as the
amount of time for standby and suspend.
Exit – Save your changes, discard your changes, or restore the default settings.
CMOS Setup
Be very careful when making changes to the setup. Incorrect settings may keep your
computer from booting. When you are finished with your changes, you should choose
"Save Changes" and exit. The BIOS will then restart your computer so that the new
settings can take effect.
Page 3
QUESTION
1. What key(s) is/are used to run the setup on your computer?
- F1
2. Who is the manufacturer of the BIOS?
- IBM
Page 4
3. What BIOS version is installed on your computer?
- not displayed.Only display the date and serial number BIOS.
4. Fill out the table:
Identify 5 things you can change in the BIOS.
Name of Setting
Setting Value
1. System Time
[23:35:11]
2. System Date
[02/29/2012]
3. PS/2 Mouse
[Enable]
4. Diskette Drive
[Enable]
5. Keyboard Speed
[Fast]
1. System Time
2. System Date
Page 5
PS/2 Mouse
4. Diskette Drive
5. Keyboard Speed
5. Change the Date to your birth date.
- Main → System Date (MM/DD/YYYY) : [09/24/1984]
Page 6
6. Enable Num Lock.
- Startup → Keyboard Numlock State : [On]
7. Save your changes.
- Exit → Save Setting
Page 7
8. Reboot your computer and observe your changes.
- Exit → Save and exit the Setup Utility
9. Enter the BIOS again, reset the date, and disable the Num Lock.
- Main → System Date (MM/DD/YYYY) : [02/29/2012]
Page 8
- Startup → Keyboard Numlock State : [Off]
Page 9