AIR COMFORT AIR DISTRIBUTION ROUND DUCTING » PRODUCT CATALOGUE VELODUCT® - Product Catalouge 3 Round ducting CONTENTS PRODUCT DESIGNATIONS PRODUCT CODES Duct ................................................................................................................... 4–8 BDBL........................................................................................................................48 VELOFLEX.......................................................................................................8, 26 BDEA *.............................................................................................................30–34 Joint ......................................................................................................................... 9 BDEB *................................................................................................................11–17 Insertion joint .................................................................................................... 10 BDEC *.....................................................................................................................49 Bend 15°, 30°, 45°, 60°, 90° ..................................................................11–17 BDED *............................................................................................................. 35–37 Bend for cleaning ............................................................................................ 18 BDEF.................................................................................................................38–41 T-piece and Cross ............................................................................19–23, 56 BDEG *............................................................................................................. 43–46 T-piece and Cross, reversed ............................................................... 24–25 BDEK...........................................................................................................................4 T-piece, short ....................................................................................................26 BDEM *...................................................................................................................... 9 T-piece, Veloflex ..............................................................................................26 BDEN *..................................................................................................................... 10 T-piece and Cross, 45° ......................................................................... 27–29 BDEP *.............................................................................................................59–62 Branch ...........................................................................................30–34, 49, 57 BDET, BDEX *..................................................................................................19–26 Reducer ...................................................................................................... 35–37 BDEV, BXEV................................................................................................... 27–29 Reducer, long ............................................................................................ 38–42 BDEZ................................................................................................................ 50, 55 Lid .........................................................................................................................43 BDKE.........................................................................................................................18 Cleaning cover ..........................................................................................44–48 BDKF *.....................................................................................................................42 Branch for insulation ......................................................................................49 BDKL *..................................................................................................................... 47 Weathering cowl .............................................................................................50 BDKP........................................................................................................................ 47 Ceiling and wall branch ................................................................................50 BDKU *......................................................................................................................51 Inlet cone with protective net....................................................................... 51 BDSK........................................................................................................................54 Branch with mesh ...........................................................................................52 EBGA........................................................................................................................54 Supply air nozzle .............................................................................................53 EKOD.......................................................................................................................... 5 Flange...................................................................................................................54 ESAD *....................................................................................................................... 6 Bracket.................................................................................................................54 FLEK........................................................................................................................... 8 Protective cap....................................................................................................55 FLEX........................................................................................................................... 8 Adjustment and shut-off damper .......................................................58–61 FLET..........................................................................................................................26 VELODUCT® Round ducting - General...................................................... 62 XBEZ................................................................................................................ 50, 53 Dimensions and tolerances...........................................................................63 XCEA........................................................................................................................57 Pressure drop charts – Ducts..................................................................... 64 XCEK...........................................................................................................................7 – Bends................................................................... 65 XCET.........................................................................................................................56 – Reducers............................................................. 66 XDEA........................................................................................................................52 – Branches, T-pieces and Crosses............... 67 XDEZ........................................................................................................................49 Installation instructions ......................................................................... 68–72 *) CE marked (smoke control duct system) according to EN 121017:2011, EC Certificate of Conformity 0761-CPD-0277 Fläkt Woods 3374 GB 2017.05.10 Specifications are subject to alteration without notice 4 VELODUCT® - Product Catalouge Round ducting DUCT BDEK - CIRCULAR DUCT bbb a BDEK-a-bbb a = length 1 = 3,00 m 2 = 6,00 m 4 = optional length between 1,00 and 6,00 m 5 = 3,00 m, liquid-tight seam DUCT PROFILE Sizes 006–020 STANDARD SIZES BDEK-a-bbb Weight kg/m -006 -008 -010 0.8 0.9 1.1 -012 -016 -020 1.4 1.8 2.7 -025 -031 -040 3.3 4.1 6.5 -050 -063 -080 8.2 12.2 15.4 -100 -125 25.5 31.9 Sizes 025–125 OTHER SIZES BDEK-a-bbb Fläkt Woods Weight kg/m -014 -015 -018 1.6 1.7 2.3 -022 -028 -030 3.0 3.7 4.0 -035 -045 -056 5.8 7.4 10.7 3374 GB 2017.05.10 Specifications are subject to alteration without notice VELODUCT® - Product Catalouge Round ducting 5 DUCT EKOD - CIRCULAR DUCT WITH PLASTIC PROTECTIVE CAP DUCT PROFILE EKOD-a-bbb-1 a = length 3 = 3,00 m 6 = 6,00 m 4 = optional length between 1,00 and 6,00 m Sizes 006–020 STANDARD SIZES Fläkt Woods EKOD-a-bbb-1 t Weight mmkg/m -006 -008 -010 0.5 0.9 0.5 1.1 0.5 1.3 -012 -016 -020 0.5 0.5 0.5 -025 -031 -040 0.5 3.3 0.5 3.9 0.7 7.9 -050 -063 -080 0.7 10.0 0.7 12.2 0.7 15.4 -100 -125 0.9 25.5 0.9 31.9 3374 GB 2017.05.10 Sizes 025–125 1.7 2.1 2.7 Specifications are subject to alteration without notice 6 VELODUCT® - Product Catalouge Round ducting DUCT ESAD - SMOKE CONTROL DUCT Fläkt Woods Oy ESAD CE marked SMOKE CONTROL DUCT Fläkt Woods Oy ESAD C DUCT PROFILE ESAD-a-bbb-1 a = length 3 = 3,00 m Sizes 010–020 STANDARD SIZES ESAD-a-bbb-1 t Weight mmkg/m -010 -012 -016 0.7 0.7 0.7 2.0 2.5 3.2 -020 -025 -031 0.7 0.7 0.7 4.0 5.0 6.3 -040 -050 -063 0.7 7.9 0.7 10.0 0.7 12.2 -080 -100 -125 0.7 15.4 0.9 25.5 0.9 31.9 Sizes 025–100 OTHER SIZES Fläkt Woods ESAD-a-bbb-1 t Weight mmkg/m -015 -030 -056 0.7 3.0 0.7 6.0 0.7 11.2 3374 GB 2017.05.10 Specifications are subject to alteration without notice VELODUCT® - Product Catalouge Round ducting 7 SPIRAL DUCT FOR EMBEDDING XCEK – SPIRAL DUCT FOR EMBEDDING IN CONCRETE, FIT-ON D L STANDARD SIZES XCEK-1-bbb Fläkt Woods 3374 GB 2017.05.10 D L Weight, t nom. m kg mm -010 0103.0 4.4 0.6 -012 0123.0 6.4 0.7 Value for deformation limit at vaccum, kPa 36 31 Specifications are subject to alteration without notice 8 VELODUCT® - Product Catalouge Round ducting DUCT VELOFLEX FLEK - SPIRAL TUBE, LENGTH 1150 MM FLEX -TELESKOPIC TUBE aaa-012 aaa-040 STANDARD SIZES LEK-aaa-120Weight F kg -010 -012 -016 1.50 1.96 2.42 aaa-120 STANDARD SIZES FLEX-aaa-bbb Length Length Weight, max min kg Fläkt Woods 3374 GB 2017.05.10 -010 - 012 -010 - 040 -010 - 120 200 640 1720 153 438 1188 0.30 0.86 2.26 -012 - 012 -012 - 040 -012 - 120 200 640 1720 153 438 1188 0.37 1.11 2.91 -016 - 012 -016 - 040 -016 - 120 200 640 1720 153 438 1188 0.42 1.39 2.64 Specifications are subject to alteration without notice VELODUCT® - Product Catalouge 9 Round ducting JOINT BDEM-1 BDEM-4 - LONG JOINT, FIT-ON – INSERTION L L 200 bbb bbb Lp Lp STANDARD SIZES STANDARD SIZES STANDARD SIZES BDEM-1-bbb L Lp Weight, mmmm kg BDEM-4-bbb L Lp Weight, mmmm kg BDEM-4-bbb-K L Lp Weight, mmmm kg -006 -008 -010 - 35 0.06 12 35 0.08 12 35 0.10 -008 -010 -012 5 35 0.25 5 35 0.32 5 35 0.40 -010 -012 -016 5 35 0.32 5 35 0.40 5 35 0.51 -012 -016 -020 12 35 0.12 12 35 0.15 12 35 0.22 -016 -020 -025 5 35 0.51 5 35 0.76 5 35 0.95 -020 -025 5 35 0.76 5 35 0.95 -025 -031 -040 12 35 0.38 12 35 0.44 12 60 1.10 -031 -040 -050 5 35 1.20 5 60 1.80 5 60 2.20 -050 -063 -080 12 60 1.40 12 60 1.70 12 95 3.30 -063 5 60 2.80 -100 -125 12 95 4.60 12 956.00 OTHER SIZES BDEM-4-bbb-K, LONG JOINT FOR CLEANING, FIT-ON – INSERTION OTHER SIZES BDEM-1-bbb L Lp Weight, mmmm kg -014 -015 -018 12 35 0.14 12 35 0.14 12 35 0.20 -014 -015 -018 5 35 0.45 5 35 0.48 5 35 0.69 -022 -028 -030 12 35 0.30 12 35 0.40 12 35 0.43 -022 -028 -030 5 35 0.85 5 35 1.00 5 35 1.10 -035 -045 -056 12 60 0.89 12 60 1.20 12 60 1.50 -035 -045 -056 5 60 1.50 5 60 2.00 5 60 2.50 Fläkt Woods 3374 GB 2017.05.10 BDEM-4-bbb L Lp Weight, mmmm kg Specifications are subject to alteration without notice 10 VELODUCT® - Product Catalouge Round ducting INSERTION JOINT BDEN-1 BDEN-4 - LONG INSERTION JOINT L bbb L 200 bbb bbb Li Li Li STANDARD SIZES STANDARD SIZES STANDARD SIZES BDEN-1-bbb L Li Weight, mmmm kg BDEN-4-bbb L Li Weight, mmmm kg BDEN-3-bbb L Li Weight, mmmm kg -006 -008 -010 5 35 0.09 5 35 0.10 5 35 0.11 -008 -010 -012 5 35 0.25 5 35 0.32 5 35 0.40 -010 265 35 0.41 -012 265 35 0.51 -016 265 35 0.65 -012 -016 -020 5 35 0.15 5 35 0.19 5 35 0.27 -016 -020 -025 5 35 0.51 5 35 0.76 5 35 0.95 -020 265 35 0.82 -025 260 35 1.04 -031 260 35 1.31 -025 -031 -040 5 35 0.43 5 35 0.52 8 60 1.10 -031 -040 -050 5 35 1.20 5 60 1.80 5 60 2.20 -040 240 60 2.41 -050 -063 -080 8 60 1.40 8 60 1.80 12 95 3.70 -063 5 60 2.80 -100 -125 12 95 5.20 12 956.60 OTHER SIZES OTHER SIZES L BDEN-3 - LONG INSERTION JOINT BDEN-4-bbb L Li Weight, mmmm kg BDEN-1-bbb L Li Weight, mmmm kg -014 -015 -018 5 35 0.14 5 35 0.14 5 35 0.20 -014 -015 -018 5 35 0.45 5 35 0.48 5 35 0.69 -022 -028 -030 5 35 0.30 5 35 0.40 5 35 0.43 -022 -028 -030 5 35 0.85 5 35 1.00 5 35 1.10 -035 -045 -056 8 60 0.89 8 60 1.20 8 60 1.50 -035 -045 -056 5 60 1.50 5 60 2.00 5 60 2.50 Fläkt Woods 3374 GB 2017.05.10 Specifications are subject to alteration without notice VELODUCT® - Product Catalouge 11 Round ducting BEND BDEB 15° - PRESSED BDEB 15° - FABRICATED STANDARD SIZES STANDARD SIZES BDEB-15-bbb BDEB-15-bbb L r Li Weight, mmmmmm kg L r Li Weight, mmmmmm kg -008 -010 -012 15 15 15 100 100 125 35 35 35 0.11 0.14 0.19 -025 -031 -040 44 60 55 250 315 400 35 35 60 0.60 1.00 1.80 -016 -020 15 15 160 200 35 35 0.26 0.42 -050 -063 -080 70 85 110 500 630 800 60 60 95 2.40 3.40 6.2 -100 -125 135 165 1000 1250 95 95 11 16 OTHER SIZES BDEB-15-bbb L r Li Weight, mmmmmm kg -014 -015 -018 20 20 25 140 150 180 35 35 35 0.22 0.24 0.36 -022 -028 -030 30 40 40 224 280 300 35 35 35 0.50 0.70 0.80 -035 -045 -056 Fläkt Woods 3374 GB 2017.05.10 50 355 60 1.50 60 450 60 2.00 75 560 60 2.80 Specifications are subject to alteration without notice 12 VELODUCT® - Product Catalouge Round ducting BEND BDEB 30° - PRESSED BDEB 30° - FABRICATED STANDARD SIZES STANDARD SIZES BDEB-30-bbb L r Li Weight, mmmmmm kg -008 -010 -012 25 30 30 100 100 125 35 35 35 0.15 0.22 0.31 BDEB-30-bbb -006 -025 -031 L r Li Weight, mmmmmm kg 30 100 35 0.11 70 250 35 1.00 90 315 35 1.20 -016 -020 40 60 160 200 35 35 0.42 0.67 -040 -050 -063 110 400 60 2.40 135500 60 3.50 170630 60 5.10 -080 -100 -125 220800 95 9.0 2701000 95 17 3401250 95 25 OTHER SIZES OTHER SIZES BDEB-30-bbb L r Li Weight, mmmmmm kg BDEB-30-bbb L r Li Weight, mmmmmm kg -014 -015 -018 40 40 50 140 150 180 35 35 35 0.36 0.39 0.54 -030 -035 -045 8530035 1.1 100355 60 2.0 125450 60 2.9 -022 -028 60 80 224 280 35 35 0.79 1.00 -056 155560 60 Fläkt Woods 3374 GB 2017.05.10 4.2 Specifications are subject to alteration without notice VELODUCT® - Product Catalouge 13 Round ducting BEND BDEB 45° - PRESSED BDEB 45° - FABRICATED Li L b bb r STANDARD SIZES STANDARD SIZES BDEB-45-bbb L r Li Weight, mmmmmm kg BDEB-45-bbb L r Li Weight, mmmmmm kg -006 -008 -010 50100 35 0.16 40 100 35 0.23 40 100 35 0.25 -031 -040 -050 130315 35 1.8 165400 60 3.4 205500 60 4.6 -012 -016 -020 50 125 35 0.38 65 160 35 0.54 80 200 35 0.80 -063 -080 -100 260630 60 6.9 330800 95 12 4101000 95 23 -025 105250 35 -125 5151250 95 34 1.0 OTHER SIZES Fläkt Woods OTHER SIZES BDEB-45-bbb L r Li Weight, mmmmmm kg BDEB-45-bbb L r Li Weight, mmmmmm kg -014 -015 -018 60140 35 0.45 65 150 35 0.50 75 180 35 0.67 -030 -035 -045 125 300 35 1.6 150355 60 2.3 185450 60 3.9 -022 -028 95 224 35 0.90 115280 35 1.30 -056 230560 60 5.6 3374 GB 2017.05.10 Specifications are subject to alteration without notice 14 VELODUCT® - Product Catalouge Round ducting BEND BDEB 60° - PRESSED BDEB 60° - FABRICATED STANDARD SIZES STANDARD SIZES BDEB-60-bbb L r Li Weight, mmmmmm kg BDEB-60-bbb L r Li Weight, mmmmmm kg -025 -031 -040 145250 35 1.3 185315 35 1.9 235400 60 4.3 -006 60100 35 0.19 -008 -010 -012 60 100 35 0.26 60 100 35 0.29 75 125 35 0.40 -016 -020 95 160 35 0.60 115200 35 0.87 -050 -063 -080 290500 60 6.3 365630 60 9.2 465800 95 15 -100 -125 5801000 95 30 7251250 95 45 BDEB-60-bbb L r Li Weight, mmmmmm kg BDEB-60-bbb L r Li Weight, mmmmmm kg -014 -015 -018 8514035 0.48 90 150 35 0.54 105180 35 0.73 -028 -030 -035 165280 35 1.6 175300 35 1.8 205355 60 3.3 -022 130224 35 -045 -056 260450 60 6.0 325560 60 7.5 OTHER SIZES Fläkt Woods 3374 GB 2017.05.10 OTHER SIZES 1.3 Specifications are subject to alteration without notice VELODUCT® - Product Catalouge 15 Round ducting BEND BDEB 90° - PRESSED BDEB 90° - FABRICATED L Li L Li bbb bbb r STANDARD SIZES STANDARD SIZES BDEB-90-bbb L r Li Weight, mm mmmm kg BDEB-90-bbb L r Li Weight, mmmmmm kg -031 -040 -050 315315 35 2.3 400400 60 5.9 500500 60 8.8 -006 10010035 0.23 -008 -010 -012 100 100 35 0.29 100 100 35 0.34 125 125 35 0.50 -016 -020 -025 160 160 35 0.87 200200 35 1.3 250250 35 1.7 -063 -080 -100 630630 60 13 800800 95 21 10001000 95 42 -125 12501250 95 BDEB-90-bbb L r Li Weight, mm mmmm kg BDEB-90-bbb L r Li Weight, mm mmmm kg -014 -015 -018 140140350.62 150 150 35 0.75 180 180 35 1.10 -030 -035 -045 300300 35 2.2 355 355 60 4.6 450 450 60 7.1 -022 -028 224 224 35 1.50 280280 35 2.00 -056 560560 60 OTHER SIZES r Fläkt Woods 3374 GB 2017.05.10 64 OTHER SIZES 10 Specifications are subject to alteration without notice 16 VELODUCT® - Product Catalouge Round ducting BEND BDEB 90 - SHORT, PRESSED BDEB 90° - SHORT, FABRICATED Li Li bbb bbb r r L L STANDARD SIZES STANDARD SIZES BDEB-90-bbb-4 L r Li Weight, mmmmmm kg BDEB-90-bbb-4 L r Li Weight, mm mmmm kg -010 -012 65 60 35 0.26 80 75 35 0.37 -016 -020 -025 105 100 35 0.56 125 120 35 0.94 160 155 35 1.3 -031 -040 -050 190 185 35 1.9 23022060 3.8 290 280 60 5.6 -063 400 400 60 8.4 5000 10000 45 50 45 50 2000 1000 025 500 063 100 q, m3/h 200 100 050 400 500 025 300 016 100 200 020 q, m3/h 100 40 40 35 20 35 20 30 5 Fläkt Woods 25 10 LA ,d B(A ) 012 10 010 ∆pt, Pa Siz e 30 20 20 20 30 q, l/s 3374 GB 2017.05.10 40 50 25 100 200 5 20 50 100 q, l/s 200 500 1000 2000 4000 Specifications are subject to alteration without notice VELODUCT® - Product Catalouge 17 Round ducting BEND BDEB 90° - SHORT, PRESSED, FIT-ON – INSERTION BDEB 90° - SHORT, FABRICATED, FIT-ON – INSERTION Lp Lp bbb bbb r Li Li r L L STANDARD SIZES STANDARD SIZES BDEB-90-bbb-4-2 L r Lp/Li Weight, mmmmmm kg BDEB-90-bbb-4-2 L r Lp/Li Weight, mm mmmm kg -010 -012 65 6035/350.26 80 7535/350.37 -016 -020 -025 105 10035/35 0.56 125 12035/35 0.94 160 15535/35 1.3 -031 -040 190 18535/35 1.9 230 22060/60 3.8 100 100 q, m3/h 200 500 1000 5000 45 50 45 50 2000 063 400 500 050 300 016 100 200 025 q, m3/h 100 40 40 35 35 20 20 30 5 Fläkt Woods 25 20 20 20 30 q, l/s 3374 GB 2017.05.10 40 50 25 10 LA ,d B(A ) 012 10 010 ∆pt, Pa Siz e 30 100 200 5 20 50 q, l/s 100 200 500 1000 2000 Specifications are subject to alteration without notice 18 VELODUCT® - Product Catalouge Round ducting BEND BDEB-90 - CLEANABLE BDKE - CLEANABLE STANDARD SIZES STANDARD SIZES BDEB-90-bbb-3 L r Li Weight, mmmmmmkg BDKE-aaa r L C E LiWeight mmmmmm mmmm kg -010 100 100 350.46 -012 125 125 350.61 -016 160 160 35 1.1 400400265400 60 5.9 -040 03 1 02 5 02 0 01 6 01 0 150 100 01 2 -020 200200 35 1.5 -025 250250 35 2.6 -031 315 315 35 3.8 50 20 Δpt, Pa 10 5 2 1 5 10 20 q, l/s 50 100 250 500 Pressure drop with cleaning cover BDEG-2 or BDEG-3. Fläkt Woods 3374 GB 2017.05.10 Specifications are subject to alteration without notice VELODUCT® - Product Catalouge 19 Round ducting T-PIECE AND CROSS BDET-1 - T-PIECE, PRESSED BRANCHES, CONCENTRIC BDEX-1 - CROSS, PRESSED BRANCHES, CONCENTRIC ccc ccc r r Li Li H H bbb bbb Li L Li L STANDARD SIZES STANDARD SIZES BDE(T,X)-1-bbb-ccc H L r Li Weight,Weight, BDETBDEX mmmmmm mm kg kg BDE(T,X)-1-bbb-ccc H L r Li Weight,Weight, BDET BDEX mm mm mm mm kg kg -031-008 010 -012 -016 -020 -025 -031 16775 10 35 1.2 1.3 17390 12 35 1.3 1.4 173100 12 35 1.5 1.6 183125 16 35 1.7 1.9 188164 20 35 2.1 2.5 188190 20 35 2.6 2.9 193215 35 35 2.9 3.3 -040-010 -012 -016 -020 -025 -031 -040 212 90 12 60/352.5 212 100 1260/352.7 225 125 16 60/353.0 225 155 2060/353.3 225 190 2060/353.9 235 215 3560/354.2 240280 32 60 5.1 2.9 3.1 3.3 3.5 4.2 4.4 6.3 -050-010 -012 -016 -020 -025 -031 -040 265 90 12 60/353.0 265 100 12 60/353.3 275 125 1660/353.7 270 155 2060/354.1 290 190 3060/354.8 285 215 2560/355.2 290280 32 60 6.5 3.4 3.7 4.0 4.3 5.1 5.4 7.5 -063-010 -012 -016 -020 -025 -031 -040 330 90 12 60/353.5 330 100 12 60/353.9 335 125 2060/354.4 335 155 2060/354.9 350 190 2560/355.9 350 215 2560/356.3 355280 32 60 7.4 3.9 4.3 4.7 5.2 6.2 6.5 8.4 -008-008 50 75 10 35 0.310.40 -010-006 -008 -010 65 60 10 35 0.310.37 60 75 10 35 0.370.46 65 75 12 35 0.450.59 -012-006 -008 -010 -012 78 70 78 78 60 75 90 90 10 10 12 12 35 0.370.43 35 0.510.67 35 0.520.66 35 0.640.84 -016-006 -008 -010 -012 -016 90 60 90 75 95 90 95 100 105125 10 10 12 12 16 35 0.460.52 35 0.610.77 350.630.77 35 0.740.91 350.92 1.2 -020-006 -008 -010 -012 -016 -020 115 60 10 110 75 10 115 90 12 115100 12 125125 16 130163 20 350.650.71 35 0.800.94 35 0.840.95 35 1.0 1.1 35 1.2 1.4 35 1.4 1.6 -025-008 -010 -012 -016 -020 -025 135 75 10 14090 12 140100 12 150125 16 155163 20 155190 20 350.96 1.1 35 1.0 1.1 35 1.2 1.4 35 1.4 1.6 35 1.8 2.1 35 2.1 2.5 Fläkt Woods 3374 GB 2017.05.10 Specifications are subject to alteration without notice 20 VELODUCT® - Product Catalouge Round ducting T-PIECE AND CROSS BDET-1 - T-PIECE, PRESSED BRANCHES, CONCENTRIC BDEX-1 - CROSS, PRESSED BRANCHES, CONCENTRIC OTHER SIZES OTHER SIZES BDE(T,X)-1-bbb-ccc H L r Li Weight,Weight, BDETBDEX mmmmmm mm kg kg BDE(T,X)-1-bbb-ccc H L r Li Weight,Weight, BDET BDEX mm mm mm mm kg kg -014-006 -008 -010 -012 -014 85 60 85 75 90 90 90 100 85 125 10 15 20 20 15 35 0.410.47 350.550.71 35 0.57 0.71 35 0.67 0.84 35 0.780.98 90 60 90 75 95 90 95 100 90 125 100 125 10 15 20 20 15 25 35 0.440.50 350.580.74 350.600.74 35 0.700.84 35 0.77 0.93 35 0.86 1.1 -030-016 -018 -020 -022 -025 -028 -015-006 -008 -010 -012 -014 -015 175 170 175 172 180 175 125 155 155 190 190 215 25 20 25 22 20 25 35 35 35 35 35 35 -031-014 -015 -018 -022 -028 173 183 178 180 183 125 125 155 190 215 15 25 20 22 25 351.71.8 351.71.9 352.02.3 352.5 2.7 352.73.0 95 125 15 35 0.810.97 105 125 25 35 0.90 1.2 -035-010 -012 -014 -015 -016 -018 -020 -022 -025 -028 -031 193 193 193 203 203 198 203 200 218 203 208 90 100 125 125 125 155 155 190 190 215 215 1560/351.8 1560/352.1 1560/352.4 2560/352.4 25 60/35 2.5 2060/352.8 25 60/35 2.9 2260/353.3 30 60/35 3.4 25 60/35 3.7 20 60/35 4.2 215125 1560/353.0 220 125 25 60/353.0 220 155 20 60/353.3 240 190 30 60/353.9 3.3 3.3 3.5 4.2 240 240 240 245 245 245 245 265 260 3.0 3.3 3.6 3.6 3.6 3.8 3.8 4.5 4.9 -016-014 -015 -018-006 -008 -010 -012 -014 -015 -016 -018 105 60 10 105 75 15 110 90 20 110100 20 105125 15 115125 25 120 125 30 110 155 20 -020-014 -015 -018 115125 15 35 1.1 1.3 125125 25 35 1.1 1.3 120155 20 35 1.4 1.5 -022-008 -010 -012 -014 -015 -016 -018 -020 -022 12775 15 12790 15 127100 15 127125 15 137 125 25 137 125 25 132 155 20 132 155 20 134 190 22 350.87 1.0 350.92 1.0 35 1.1 1.3 35 1.2 1.4 35 1.3 1.4 35 1.3 1.5 35 1.5 1.8 35 1.6 1.9 35 1.8 2.0 -025-014 -015 -018 -022 140125 15 150 125 25 145 155 20 147 190 22 35 35 35 35 1.4 1.4 1.9 2.0 -028-008 -010 -012 -014 -015 -016 -018 -020 -022 -025 -028 15575 15 15590 15 155100 15 155125 15 165125 25 165 125 25 160 155 20 165 155 25 162 190 22 170 190 30 165 215 25 35 35 35 35 35 35 35 35 35 35 35 1.0 1.1 1.1 1.2 1.3 1.5 1.5 1.6 1.5 1.7 1.6 1.7 1.8 2.0 1.9 2.2 2.2 2.5 2.3 2.7 2.5 2.8 -030-008 -010 -012 -014 -015 16575 15 16590 15 165100 15 165125 15 175125 25 35 35 35 35 35 1.2 1.3 1.3 1.4 1.5 1.6 1.7 1.8 1.7 1.9 Fläkt Woods 3374 GB 2017.05.10 35 0.600.66 35 0.740.87 35 0.770.88 35 0.91 1.1 35 1.0 1.2 35 1.0 1.2 35 1.1 1.3 35 1.2 1.4 1.5 1.6 2.3 2.2 -040-014 -015 -018 -025 -045-010 -012 -014 -015 -016 -018 -020 -025 -031 -050-014 -015 -018 -056-010 -012 -014 -015 -016 -018 -020 -025 -031 -063-014 -015 -018 90 100 125 125 125 155 155 190 215 1.7 2.0 2.1 2.5 2.6 2.7 15 60/352.6 15 60/352.9 15 60/353.2 20 60/35 3.2 20 60/35 3.2 20 60/35 3.6 20 60/35 3.6 30 60/35 4.2 25 60/35 4.6 1.9 2.3 2.5 2.7 2.9 3.0 1.9 2.3 2.5 2.6 2.6 3.0 3.2 3.5 3.7 3.9 4.4 265125 1560/353.7 4.0 270 125 20 60/353.7 4.0 270 155 20 60/354.1 4.3 295 295 295 300 300 300 300 315 315 90 100 125 125 125 155 155 190 215 15 60/353.2 15 60/353.5 15 60/354.0 20 60/35 4.0 20 60/35 4.0 20 60/35 4.4 20 60/35 4.4 25 60/35 5.3 25 60/35 5.6 3.6 3.9 4.3 4.3 4.3 4.7 4.7 5.6 5.9 330125 1560/354.4 4.7 335 125 20 60/354.4 4.7 335 155 20 60/354.9 5.2 Specifications are subject to alteration without notice VELODUCT® - Product Catalouge 21 Round ducting T-PIECE AND CROSS BDET-1 - T-PIECE, FABRICATED BRANCHES, CONCENTRIC BDEX-1 CROSS - FABRICATED BRANCHES, CONCENTRIC ccc ccc Li Li H H bbb bbb Li L Li L STANDARD SIZES OTHER SIZES BDE(T,X)-1-bbb-ccc H L Li Weight,Weight, BDET BDEX mmmmmm kg kg BDE(T,X)-1-bbb-ccc H L Li Weight,Weight, BDET BDEX mmmmmm kg kg -050-050 345345 60 8.69.5 -030-030 210210 35 3.94.6 -063-050 -016 410345 60 10 11 430430 60 12 13 -031-030 220210 35 4.04.7 -080-040 -050 -063 -080 480 28595/60 495 35095/60 515 43595/60 545545 95 14 15 18 24 16 17 18 30 -035-030 -035 240215 60/35 250250 60 4.24.9 5.05.7 -100-050 -063 -080 -100 595 34595/60 615 43095/60 645545 95 675675 95 19 24 25 31 19 24 24 29 -040-022 -028 -030 -035 250165 60/35 260205 60/35 260215 60/35 275250 60 3.43.8 3.74.6 4.65.3 5.46.0 -125-063 -080 -100 -125 740 43595/60 770545 95 800675 95 840840 95 29 27 33 38 40 41 46 44 -045-022 -028 -030 -035 -040 -045 275165 60/35 285205 60/35 285215 60/35 300250 60 305280 60 315315 60 4.34.6 4.64.8 5.25.5 5.45.6 6.66.8 6.97.2 -050-022 -028 -030 -035 -045 300165 60/35 310205 60/35 310215 60/35 325250 60 340315 60 5.55.7 6.77.0 6.97.3 7.07.4 8.09.0 -056-022 -028 -030 -035 -040 -045 -050 -056 330165 60/35 340205 60/35 340215 60/35 355250 60 360280 60 370315 60 375345 60 385385 60 5.65.8 6.97.2 7.07.5 8.18.3 8.48.5 8.68.8 8.89.3 9.811 -063-022 -028 -030 -035 -045 -056 365165 60/35 375205 60/35 375215 60/35 390250 60 405315 60 420385 60 6.06.3 6.56.8 7.27.4 7.88.0 9 10 1112 Fläkt Woods 3374 GB 2017.05.10 Specifications are subject to alteration without notice 22 VELODUCT® - Product Catalouge Round ducting T-PIECE AND CROSS BDET-2 - T-PIECE, FABRICATED BRANCHES, ECCENTRIC BDEX-2 - CROSS, FABRICATED BRANCHES, ECCENTRIC ccc ccc Li Li H H bbb bbb Li L Li L STANDARD SIZES BDE(T,X)-2-bbb-ccc H L Li Weight, Weight, BDET BDEX mmmmmm kg kg -040-010 -012 -016 -020 -025 -031 -050-010 -012 -016 -020 -025 -031 -040 230 8560/352.7 235 10560/35 3.0 240 12560/35 3.1 245 15060/35 3.6 255 18560/35 4.1 265 22560/35 5.0 2.8 3.2 3.6 3.9 4.6 5.5 280 8560/353.6 3.6 285 10560/35 3.8 4.0 290 12560/35 4.1 4.4 295 15060/35 4.5 4.7 305 18560/35 5.4 5.7 315 22560/35 6.0 6.4 330280 60 7.5 8.5 -063-010 345 8560/354.4 4.7 -012 350 10560/35 4.8 5.0 -016 355 12560/35 5.3 5.6 -020 360 15060/35 5.7 6.0 -025 370 18560/35 6.8 7.1 -031 380 22560/35 7.6 8.0 -040 395280 60 9.2 10 -050 410345 60 11 12 Fläkt Woods 3374 GB 2017.05.10 -080-040 -050 -063 480 28595/60 13 14 495 35095/60 16 17 515 43595/60 18 20 -100-050 -063 -080 595 35095/60 17 23 615 43595/60 26 26 645545 95 32 35 -125-063 -080 -100 740 43595/60 32 30 770545 95 36 34 800675 95 46 49 Specifications are subject to alteration without notice VELODUCT® - Product Catalouge 23 Round ducting T-PIECE AND CROSS BDET-2 - T-PIECE, FABRICATED BRANCHES, ECCENTRIC BDEX-2 - CROSS, FABRICATED BRANCHES, ECCENTRIC ccc ccc Li Li H H bbb bbb Li L Li L OTHER SIZES OTHER SIZES BDE(T,X)-2-bbb-ccc H L Li Weight, Weight, BDET BDEX mmmmmm kg kg BDE(T,X)-2-bbb-ccc H L Li Weight, Weight, BDET BDEX mmmmmm kg kg -040-014 -015 -018 -022 -028 -030 -035 240110 60/35 240120 60/35 245140 60/35 250165 60/35 260205 60/35 260215 60/35 275250 60 3.13.5 3.13.5 3.53.8 3.84.2 4.34.6 5.05.5 5.46.0 -045-010 -012 -014 -015 -016 -018 -020 -022 -025 -028 -030 -031 -035 -040 25585 60/35 260105 60/35 260110 60/35 265120 60/35 265125 60/35 270140 60/35 270150 60/35 275165 60/35 280185 60/35 285205 60/35 285215 60/35 290225 60/35 300250 60 305280 60 3.53.7 4.24.8 4.04.4 4.04.4 4.14.5 4.24.5 4.24.6 4.34.6 4.54.7 4.64.8 5.05.4 5.05.4 5.45.6 6.66.8 -056-010 -012 -014 -015 -016 -018 -020 -022 -025 -028 -030 -031 -035 -040 -045 -050 31085 60/35 315105 60/35 315110 60/35 320120 60/35 320125 60/35 325140 60/35 325150 60/35 330165 60/35 335185 60/35 340205 60/35 340215 60/35 345225 60/35 355250 60 360280 60 370315 60 375345 60 4.04.2 4.44.7 4.75.1 4.85.2 4.85.3 4.95.3 5.05.3 5.05.4 5.35.6 5.55.7 6.56.7 7.07.2 7.17.3 8.48.6 8.68.9 8.89.3 -050-014 -015 -018 -022 -028 -030 -035 -045 285110 60/35 290120 60/35 295140 60/35 300165 60/35 310205 60/35 310215 60/35 325250 60 340315 60 4.14.3 4.14.3 4.34.6 4.95.3 5.66.2 6.06.4 7.17.5 8.59.0 350110 60/35 355120 60/35 360140 60/35 365165 60/35 375205 60/35 375215 60/35 390250 60 405315 60 420385 60 5.35.5 5.35.6 5.55.8 6.26.5 7.37.5 7.68.0 8.59.0 1011 1213 Fläkt Woods 3374 GB 2017.05.10 -063-014 -015 -018 -022 -028 -030 -035 -045 -056 Specifications are subject to alteration without notice 24 VELODUCT® - Product Catalouge Round ducting REVERSED T-PIECE BDET-1 - REVERSED T-PIECE, FABRICATED, CONCENTRIC ccc Li H bbb Li ccc OTHER SIZES STANDARD SIZES BDET-1-bbb-ccc L r LiWeight, mmmmmm kg BDET-1-bbb-ccc L r LiWeight, mmmmmm kg -008-010 -012 70 80 35 0.4 7510035 0.5 -010-012 -016 8510035 0.6 9012035 0.6 -016-018 -022 -018-020 -022 -025 -028 -020-022 -028 -030 -022-025 -028 -030 -031 -035 -025-028 -030 -035 -028-030 -031 -035 -040 -045 -030-031 -035 -040 -045 -050 -031-035 -045 -035-040 -045 -050 -056 -040-045 -056 -045-050 -056 -063 -012-016 105 120 35 0.7 -020 11014535 0.9 -016-020 -025 125 145 35 1.1 135180 35 1.3 -020-025 -031 155 180 35 165220 35 1.7 2.2 -025-031 -040 190220 35 205275 35/60 2.8 3.9 -031-040 -050 -040-050 -063 240275 35/60 255340 35/60 295345 60 315430 60 4.6 5.5 6.5 8.2 365430 60 9.7 -050-063 OTHER SIZES BDET-1-bbb-ccc L r LiWeight, mmmmmm kg -008-014 -010-014 -015 -018 -012-014 -015 -018 -014-015 -016 -018 -020 -022 -015-016 -018 -020 -022 Fläkt Woods 3374 GB 2017.05.10 7510535 0.5 8510535 0.6 90115350.6 9513535 0.6 100 105 35 0.6 100115 35 0.6 105135 35 0.8 110 115 35 0.8 11012035 0.8 11513535 0.8 11514535 1.0 120160 35 1.1 115 120 35 0.8 120135 35 0.8 120145 35 1.0 125160 35 1.1 125135 35 130160 35 135 145 35 140160 35 145180 35 150200 35 150 160 35 160200 35 160210 35 165180 35 170200 35 175210 35 175220 35 185245 35/60 185200 35 185210 35 200245 35/60 200210 35 205220 35 215245 35/60 220275 35/60 230310 35/60 215220 35 225245 35/60 230275 35/60 240310 35/60 245340 35/60 230245 35/60 245310 35/60 260280 60 265315 60 275345 60 285385 60 290315 60 305385 60 320345 60 330385 60 340430 60 0.9 1.1 1.4 1.4 1.6 1.7 1.0 2.0 2.1 1.8 1.9 2.4 2.4 3.3 2.4 2.6 3.6 2.9 3.2 3.9 4.2 4.6 4.0 4.2 4.5 5.0 5.4 4.3 5.1 5.0 6.1 6.5 7.6 6.5 6.6 7.8 8.4 9.0 -050-056 355385 60 9.2 -056-063 395430 60 9.9 Specifications are subject to alteration without notice VELODUCT® - Product Catalouge 25 Round ducting REVERSED T-PIECE BDET-2 - REVERSED T-PIECE, FABRICATED, ECCCENTRIC ccc Li H bbb Li L OTHER SIZES STANDARD SIZES BDET-2-bbb-ccc L r LiWeight, mmmmmm kg BDET-2-bbb-ccc L r LiWeight, mmmmmm kg -008-010 -012 70 80 35 0.4 7510035 0.5 -010-012 -016 8510035 0.6 9012035 0.6 -016-018 -022 -018-020 -022 -025 -028 -020-022 -028 -030 -022-025 -028 -030 -031 -035 -025-028 -030 -035 -028-030 -031 -035 -040 -045 -030-031 -035 -040 -045 -050 -031-035 -045 -035-040 -045 -050 -056 -040-045 -056 -045-050 -056 -063 -012-016 105 120 35 0.7 -020 11014535 0.9 -016-020 -025 125 145 35 1.1 135180 35 1.3 -020-025 -031 155 180 35 165220 35 1.7 2.2 -025-031 -040 190220 35 205275 35/60 2.8 3.9 -031-040 -050 -040-050 -063 240275 35/60 255340 35/60 295345 60 315430 60 4.6 5.5 6.5 8.2 365430 60 9.7 -050-063 OTHER SIZES BDET-2-bbb-ccc L r LiWeight, mmmmmm kg -008-014 -010-014 -015 -018 -012-014 -015 -018 -014-015 -016 -018 -020 -022 -015-016 -018 -020 -022 Fläkt Woods 3374 GB 2017.05.10 7510535 0.5 8510535 0.6 90115350.6 9513535 0.6 100 105 35 0.6 100115 35 0.6 105135 35 0.8 110 115 35 0.8 11012035 0.8 11513535 0.8 11514535 1.0 120160 35 1.1 115 120 35 0.8 120135 35 0.8 120145 35 1.0 125160 35 1.1 125135 35 130160 35 135 145 35 140160 35 145180 35 150200 35 150 160 35 160200 35 160210 35 165180 35 170200 35 175210 35 175220 35 185245 35/60 185200 35 185210 35 200245 35/60 200210 35 205220 35 215245 35/60 220275 35/60 230310 35/60 215220 35 225245 35/60 230275 35/60 240310 35/60 245340 35/60 230245 35/60 245310 35/60 260280 60 265315 60 275345 60 285385 60 290315 60 305385 60 320345 60 330385 60 340430 60 0.9 1.1 1.4 1.4 1.6 1.7 1.0 2.0 2.1 1.8 1.9 2.4 2.4 3.3 2.4 2.6 3.6 2.9 3.2 3.9 4.2 4.6 4.0 4.2 4.5 5.0 5.4 4.3 5.1 5.0 6.1 6.5 7.6 6.5 6.6 7.8 8.4 9.0 -050-056 355385 60 9.2 -056-063 395430 60 9.9 Specifications are subject to alteration without notice 26 VELODUCT® - Product Catalouge Round ducting T-PIECE BDET-3 - T-PIECE, SHORT, INSERTION - FIT-ON BDET-4 - T-PIECE, SHORT, FIT-ON - FIT-ON ccc ccc r r Li Li H H bbb bbb Li Lp L Lp L STANDARD SIZES STANDARD SIZES BDET-3-bbb-ccc H L Li/Lp r Weight, mmmmmmmm kg BDET-4-bbb-ccc H L Li/Lp r Weight, mmmmmmmm kg -010-010 -012-012 -016-016 60 6535/35 10 0.40 75 8535/35 12 0.57 96 10535/35 16 0.82 -010-010 -012-012 -016-016 60 6535/35 10 0.40 75 8535/35 12 0.57 96 10535/35 16 0.82 -020-020 125 13535/35 25 1.2 -020-020 125 13535/35 25 1.2 VELOFLEX FLET - T-PIECE, INSERTION - FIT-ON STANDARD SIZES FLET-aaa-bbb H L Li Weight, mmmm mm kg -010 - 010 -012 - 010 -012 - 012 108 121 121 90 85 100 35 35 35 0.50 0.57 0.32 -016 - 010 -016 - 012 -016 - 016 138 138 138 90 100 125 35 35 35 0.67 0.80 1.05 Fläkt Woods 3374 GB 2017.05.10 Specifications are subject to alteration without notice VELODUCT® - Product Catalouge 27 Round ducting T-PIECE AND CROSS BXEV-1 - CROSS, 45°, CONCENTRIC (TO THE RIGHT) Li Li BDEV-1 - T-PIECE, 45° (TO THE LEFT) cc c H cc c H bbb bbb L Li cc c Li Li L Li STANDARD SIZES STANDARD SIZES B(D,X)EV-1-bbb-ccc H L Li Weight,Weight, BDEV BXEV mmmmmm kg kg B(D,X)EV-1-bbb-ccc H L Li Weight,Weight, BDEV BXEV mmmmmm kg kg -006-006 -008-006 -008 -010-008 -010 -012-008 -010 -012 -016-008 -010 -012 -016 -020-008 -010 -012 -016 -020 -025-010 -012 -016 -020 -025 -031-010 -012 -016 -020 -025 -031 -040-010 -012 -016 -020 -025 -031 -040 -050-010 -012 -016 -020 -025 -031 -040 -050 -063-016 -020 -025 -031 -040 -050 -063 Fläkt Woods 3374 GB 2017.05.10 235 160 35 0.310.34 235 160 35 0.390.42 250 165 35 0.410.46 250 180 35 0.510.56 280 190 35 0.560.65 250 200 35 0.630.68 280 210 35 0.690.78 315 220 35 0.800.91 280 220 35 0.800.89 305230 35 0.941.0 340245 35 1.1 1.2 390275 35 1.2 1.4 280250 35 1.0 1.1 305260 35 1.1 1.2 340270 35 1.2 1.3 390305 35 1.5 1.6 450325 35 1.8 2.0 305295 35 1.4 1.5 340310 35 1.6 1.7 390340 35 1.8 2.0 450360 35 2.1 2.3 520385 35 2.7 2.9 335340 35 1.9 2.0 370335 35 2.1 2.3 420385 35 2.4 2.6 475405 35 2.83.0 545430 35 3.3 3.6 640480 35 4.0 4.3 335 40060/35 3.4 3.5 370 41560/35 3.6 3.7 420 44560/35 4.0 4.2 475 46560/35 4.4 4.6 545 49060/35 5.0 5.3 640 53560/35 5.6 5.9 760580 60 6.8 7.6 355 57060/35 4.4 4.5 370 58560/35 4.5 4.7 420 51560/35 5.0 5.2 475 53560/35 5.5 5.7 545 56060/35 6.0 6.4 640 61060/35 7.1 7.4 760650 60 8.3 9.0 900700 60 10 11 420 60560/35 6.3 6.5 530 63060/35 7.4 7.6 600 65560/35 8.2 8.5 690 70060/35 9.3 9.6 810740 60 11 12 950790 60 13 14 1140855 60 15 17 Specifications are subject to alteration without notice 28 VELODUCT® - Product Catalouge Round ducting T-PIECE AND CROSS BXEV-1 - CROSS, 45°, CONCENTRIC (TO THE RIGHT) Li Li BDEV-1 - T-PIECE, 45° (TO THE LEFT) cc c H cc c H bbb bbb L Li cc c Li Li L Li OTHER SIZES OTHER SIZES B(D,X)EV-1-bbb-ccc H L Li Weight,Weight, BDEV BXEV mmmmmm kg kg -014-008 280 210 35 0.770.86 -010 305 220 35 0.830.92 -012 340230 35 0.941.0 -014 365250 35 1.1 1.2 -015-008 280 215 35 0.820.87 -010 305 225 35 0.890.98 -012 340240 35 1.0 1.1 -015 380265 35 1.1 1.3 -016-014 365265 35 1.1 1.3 -018-008 280235 35 0.981.0 -010 305245 35 1.1 1.2 -012 340260 35 1.2 1.3 -014 365280 35 1.3 1.4 -015 380285 35 1.3 1.4 -016 390290 35 1.4 1.5 -018 420300 35 1.5 1.7 -020-014 365295 35 1.4 1.5 -015 380300 35 1.4 1.5 -018 420315 35 1.6 1.8 -022-010 305275 35 1.1 1.1 -012 340290 35 1.4 1.5 -014 365310 35 1.5 1.6 -015 380315 35 1.6 1.7 -016 390320 35 1.6 1.8 -018 420330 35 1.8 1.9 -020 450340 35 1.9 2.1 -022 480350 35 2.1 2.3 -025-014 365330 35 1.7 1.8 -015 380335 35 1.8 1.9 -018 420350 35 2.0 2.2 -022 480370 35 2.3 2.5 B(D.X)EV-1-bbb-ccc H L Li Weight,Weight, BDEV BXEV mmmmmm kg kg -028-010 335315 35 1.7 1.8 -012 370330 35 1.9 2.0 -014 390350 35 2.0 2.2 -015 405355 35 2.1 2.3 -016 420360 35 2.2 2.4 -018 445370 35 2.32.5 -020 475380 35 2.5 2.7 -022 510390 35 2.7 2.9 -025 545405 35 3.0 3.2 -028 590435 35 3.2 3.5 -030-010 335340 35 1.9 2.0 -012 370350 35 2.1 2.3 -014 390365 35 2.2 2.4 -015 405370 35 2.3 2.5 -016 420375 35 2.4 2.6 -018 445385 35 2.5 2.7 -020 475395 35 2.7 2.9 -022 510405 35 2.9 3.1 -025 545420 35 3.2 3.5 -028 590450 35 3.5 3.8 -030 615460 35 3.9 4.2 -031-014 390375 35 2.2 2.4 -015 405380 35 2.3 2.5 018 445395 35 2.6 2.8 -022 510415 35 3.03.2 -028 590460 35 3.6 3.9 -030 615470 35 3.74.0 -035-010 335370 60/35 2.12.2 -012 370380 60/35 2.32.4 -014 390405 60/35 2.52.7 -015 405410 60/35 2.62.7 -016 420415 60/35 2.72.9 -018 445425 60/35 2.83.0 -020 475435 60/35 3.03.2 -022 510445 60/35 3.43.6 -025 545460 60/35 3.63.9 -028 590490 60/35 3.94.2 -030 615500 60/35 4.34.7 -031 640505 60/35 4.44.8 -035 695525 60 4.75.3 Fläkt Woods 3374 GB 2017.05.10 Specifications are subject to alteration without notice VELODUCT® - Product Catalouge 29 Round ducting T-PIECE AND CROSS BXEV-1 - CROSS, 45°, CONCENTRIC (TO THE RIGHT) Li Li BDEV-1 - T-PIECE, 45° (TO THE LEFT) cc c H cc c H bbb bbb L Li cc c Li Li L Li OTHER SIZES OTHER SIZES B(D.X)EV-1-bbb-ccc H L Li Weight,Weight, BDEV BXEV mmmmmm kg kg -040-014 390435 60/353.8 3.9 -015 405440 60/353.9 4.0 -018 445455 60/354.2 4.4 -022 510475 60/354.7 4.9 -028 590520 60/355.3 5.6 -030 615530 60/355.5 5.8 -035 695555 60 6.2 6.8 -045-010 335435 60/353.9 4.0 -012 370450 60/354.2 4.3 -014 390470 60/354.4 4.5 -015 405475 60/354.5 4.6 -016 420480 60/354.6 4.8 -018 445490 60/354.8 5.0 -020 475500 60/355.0 5.2 -022 510510 60/355.4 5.6 -025 545525 60/355.7 5.9 -028 590555 60/356.0 6.4 -030 615565 60/356.3 6.7 -031 640570 60/356.5 6.9 -035 695590 60 7.0 7.6 -040 760615 60 7.7 8.4 -045 830640 60 8.5 9.3 -050-014 390505 60/354.7 4.9 -015 405510 60/354.9 5.1 -018 445525 60/355.2 5.4 -022 510550 60/355.8 6.0 -028 590590 60/356.6 6.9 -030 615600 60/356.8 7.2 -035 695630 60 7.6 8.2 -045 830675 60 9.2 9.9 B(D.X)EV-1-bbb-ccc H L Li Weight,Weight, BDEV BXEV mmmmmm kg kg -056-015 405550 60/355.4 5.6 -016 420555 60/355.6 5.7 -018 445565 60/355.8 6.0 -020 530580 60/356.4 6.8 -022 565590 60/356.9 7.1 -025 600605 60/357.3 7.6 -028 640630 60/357.7 8.0 -030 665640 60/357.5 7.8 -031 690650 60/358.3 8.6 -035 750670 60 8.99.5 -040 810690 60 9.6 10 -045 880715 60 11 11 -050 950740 60 12 12 -056 1040800 60 13 14 -063-015 405600 60/356.1 6.3 -018 445615 60/356.6 6.8 -022 565640 60/357.9 8.1 -028 640680 60/358.7 9.0 -030 665665 60/359.0 9.3 -035 750720 60 10 11 -045 880765 60 12 13 -056 1040850 60 14 15 Fläkt Woods 3374 GB 2017.05.10 Specifications are subject to alteration without notice 30 VELODUCT® - Product Catalouge Round ducting BRANCH BDEA-1 - BRANCH, PRESSED, CONCENTRIC ccc ccc r r Li Li H H bbb bbb STANDARD SIZES STANDARD SIZES BDEA-1-bbb-ccc H r LiWeight mmmmmm kg BDEA-1-bbb-ccc H r LiWeight mmmmmm kg -008-008 5010 35 0.10 -010-008 6010 35 0.10 -010 6512 35 0.14 -012-008 701035 0.10 -010 781235 0.13 -012 781235 0.21 -016-008 9010 350.09 -010 9512 35 0.12 -012 9512 35 0.19 -016 10516 35 0.34 -020-008 11010 35 0.09 -010 11512 35 0.12 -012 11512 35 0.17 -01612516350.29 -020 13020 35 0.46 -025-008 13510 35 0.09 -010 14012 35 0.12 -012 14012 35 0.17 -01615016350.29 -020 15520 35 0.41 -025 15520 35 0.63 -031-008 16710 35 0.09 -010 17312 35 0.12 -012 17312 35 0.17 -016 18316 35 0.27 -020 18820 35 0.41 -025 18820 35 0.50 -031 19335 35 0.85 -040-010 21212 35 0.12 -012 21212 35 0.17 -016 22516 35 0.25 -020 22520 35 0.37 -025 22520 35 0.49 -031 23535 35 0.68 -050-010 26512 35 0.12 -012 26512 35 0.17 -016 27516 35 0.25 -010-006 -012-006 -016-006 -020-006 65 10 350.08 78 10 350.08 9010 350.08 11510 350.08 -040-040 24032 60 1,90 -050-020 27020 35 0.48 -025 29030 35 0.69 -031 28525 35 0.85 -040 29032 60 1.70 -063-016 33520 35 0.48 -020 33520 35 0.48 -025 35025 35 0.69 -031 35025 35 0.85 -040 35532 60 1.70 OTHER SIZES BDEA-1-bbb-ccc H r LiWeight mmmmmm kg -014-006 85 10 350.08 -008 8515350.19 -010 9020 350.19 -012 9020 350.24 -014 85 15 35 0.33 -015-006 9010 350.08 -008 9015 350.19 -010 9520 350.19 -012 9520 350.24 -014 90 15 35 0.28 -015 100 25 35 0.37 -016-014 -015 95 105 15 25 35 35 0.30 0.37 -018-006 10510 350.08 -008 10515 35 0.17 -010 11020 35 0.17 -012 11020 350.23 -063-010 33012 35 0.12 -012 33012 35 0.17 Fläkt Woods 3374 GB 2017.05.10 Specifications are subject to alteration without notice VELODUCT® - Product Catalouge 31 Round ducting BRANCH BDEA-1 - BRANCH, PRESSED, CONCENTRIC ccc r Li H bbb OTHER SIZES OTHER SIZES BDEA-1-bbb-ccc H r LiWeight mmmmmm kg -018-014 10515 35 0.27 -015 11525 35 0.28 -016 120 30 35 0.32 -018 110 20 35 0.44 -020-014 11515 35 0.26 -015 12525 35 0.29 -018 120 20 35 0.44 -022-008 12715 35 0.16 -010 12715 35 0.16 -012 12715 35 0.23 -014 12715 35 0.27 -015 137 25 35 0.31 -016 137 25 35 0.35 -018 132 20 35 0.44 -020 132 20 35 0.53 -022 134 22 35 0.62 -025-014 140 15 35 0.27 -015 150 25 35 0.31 -018 145 20 35 0.44 -022 147 22 35 0.62 -028-008 15515 35 0.16 -010 15515 35 0.16 -012 15515 35 0.23 -014 15515 35 0.27 -015 16525 35 0.31 -016 165 25 35 0.35 -018 160 20 35 0.44 -020 165 25 35 0.53 -022 162 22 35 0.62 -025 170 20 35 0.75 -028 165 25 35 0.88 -030-008 16515 35 0.16 -010 16515 35 0.16 -012 16515 35 0.23 -014 16515 35 0.26 -015 17525 35 0.29 -016 17525 35 0.32 -018 170 20 35 0.42 -020 175 25 35 0.52 -022 172 22 35 0.62 -025 180 20 35 0.72 -028 175 25 35 0.86 BDEA-1-bbb-ccc H r LiWeight mmmmmm kg -031-014 17315 35 0.26 -015 183 25 350.29 -018 17820 350.42 -022 180 22 350.62 -028 183 25 350.86 -035-010 19315 35 0.16 -012 19315 35 0.23 -014 19315 35 0.26 -015 20325 35 0.29 -016 203 25 35 0.32 -018 19820 35 0.42 -020 203 25 35 0.52 -022 20022 35 0.62 -025 218 30 35 0.72 -028 203 25 35 0.86 -031 208 20 35 1.0 -040-014 21515 350.48 -015 220 20 350.48 -018 220 20 350.48 -045-010 24015 35 0.48 -012 24015 35 0.48 -014 24015 35 0.48 -015 245 20 35 0.48 -016 245 20 35 0.48 -018 245 20 35 0.48 -020 245 20 35 0.48 -025 265 30 35 0.69 -031 260 25 35 0.85 -050-014 26515 350.48 -015 270 20 350.48 -018 270 20 350.48 -056-010 29515 35 0.48 -012 29515 35 0.48 -014 29515 35 0.48 -015 300 20 35 0.48 -016 300 20 35 0.48 -018 300 20 35 0.48 -020 300 20 35 0.48 -025 315 25 35 0.69 -031 315 25 35 0.85 -063-014 33015 350.48 -015 335 20 350.48 350.48 -018 335 20 Fläkt Woods 3374 GB 2017.05.10 Specifications are subject to alteration without notice 32 VELODUCT® - Product Catalouge Round ducting BRANCH BDEA-1 - BRANCH, FABRICATED, CONCENTRIC ccc Li H bbb STANDARD SIZES OTHER SIZES BDEA-1-bbb-ccc H Li Weight, mmmm kg BDEA-1-bbb-ccc H Li Weight, mmmm kg -050-050 34560 3.9 -030-030 21035 1.3 -063-050 41060 3.9 -063 43060 5.5 -031-030 22035 1.4 -080-031 48035 2.4 -040 49560 4.2 -050 51560 4.8 -063 52060 6.1 -080 52595 13 -035-030 24035 1.6 -035 25060 2.2 -040-022 25035 1.2 -028 26035 1.6 -030 26035 1.7 -035 27560 2.3 3.9 2.6 3.4 7.0 7.6 12 -045-022 27535 1.2 -028 28535 1.6 -030 28535 1.7 -035 30060 2.4 -040 30560 2.7 -045 31560 2.8 -125-050 72060 8.1 -063 74060 6.3 -080 77095 9.3 -100 80095 13 -125 84095 19 -050-022 30035 1.2 -028 31035 1.6 -030 31035 1.7 -035 32560 2.6 -045 34060 3.4 -100-031 55535 -040 58060 -050 59560 -063 61560 -080 64595 -100 67595 -056-022 33035 1.2 -028 34035 1.6 -030 34035 1.8 -035 35560 2.7 -040 36060 3.0 -045 37060 3.6 -050 37560 3.9 -056 38560 4.1 -063-022 36535 1.2 -028 37535 1.6 -030 37535 1.9 -035 39060 2.8 -045 40560 3.4 -056 42060 4.8 Fläkt Woods 3374 GB 2017.05.10 Specifications are subject to alteration without notice VELODUCT® - Product Catalouge 33 Round ducting BRANCH BDEA-2 - BRANCH WITH FOLDING TABS AND SEAL, SMALL RADIUS AND POP-RIVETING EDGE bbb r Li 12-22 STANDARD SIZES OTHER SIZES DEA-2-bbb B r Li Weight, mmmm kg DEA-2-bbb B r Li Weight, mmmm kg -008 335 0.13 -010 335 0.15 -012 335 0.19 -016 3350.25 -020 4350.33 -025 4350.43 -031 4350.55 -040 4600.85 -050 460 1.1 -014 335 0.21 -015 5350.23 -018 4350.29 -022 4350.37 -028 4350.49 -030 4350.53 -035 4600.70 -045 4600.98 -056 460 1.3 -063 460 1.6 Fläkt Woods 3374 GB 2017.05.10 Specifications are subject to alteration without notice 34 VELODUCT® - Product Catalouge Round ducting BRANCH BDEA-5 - BRANCH WITH RADIUS BDEA-6 - BRANCH WITH SMALL RADIUS bbb bbb r Li r Li 12-22 12-30 Sizes 008 - 063 pressed Sizes 008 - 020 extruded sealing and 080 - 125 Veloduct sealing bbb r Li 12-22 Sizes 080 - 125 fabricated Sizes 025 - 063 Veloduct Twin sealing STANDARD SIZES STANDARD SIZES DEA-5-bbb B r Li Weight, mmmm kg DEA-6-bbb B r Li Weight, mmmm kg -008 1035 0.11 -010 1535 0.15 -012 2035 0.20 -008 235 0.10 -010 235 0.10 -012 235 0.15 -016 2535 0.27 -020 2535 0.35 -025 2535 0.51 -016 235 0.18 -020 235 0.25 -025 4 40 0.23 -031 2535 0.70 -040 * 30 60 0.88 -050 * 30 60 1.1 -031 4 40 0.27 -040 450 0.40 -050 4650.66 -063 * 30 60 -080 12095 -100 12095 1.4 3.8 7.2 -063 4 70 1.0 -080 495 2.2 -100 495 2.6 -125 14595 9.2 -125 495 3.2 *) normal Veloduct sealing OTHER SIZES OTHER SIZES DEA-5-bbb B r Li Weight, mmmm kg DEA-6-bbb B r Li Weight, mmmm kg -014 1535 0.23 -015 2535 0.25 -018 2035 0.31 -014 335 0.16 -015 335 0.17 -018 335 0.22 -022 2035 0.42 -028 2535 0.60 -022 435 0.29 -028 4350.38 -030 435 0.40 -035 460 0.51 -045 460 0.70 -056 4600.88 Fläkt Woods 3374 GB 2017.05.10 Specifications are subject to alteration without notice VELODUCT® - Product Catalouge 35 Round ducting REDUCER BDED-1 - REDUCER, CONCENTRIC, FIT-ON - INSERTION L bbb ccc STANDARD SIZES OTHER SIZES OTHER SIZES DED-1-bbb-ccc B L Li Weight, mm mm kg -008-006 25 35 0.11 -010-006 35 35 0.15 -00820 350.15 -012-006 45 35 0.22 -00850 350.22 -01035 350.22 -016-008 55 35 0.28 -01055 350.28 -01240 350.28 -020-010 80 35 0.36 -01265 350.36 -01645 350.36 -025-012 95 35 0.55 -01675 350.55 -02050 350.55 -031-016110 350.75 -02090 350.75 -02560 350.75 -040-020 * 125 35 1.4 -025 * 105 35 1.3 -031 * 75 35 1.2 -050-025 * 150 35 1.9 -031 * 120 35 1.8 -040 * 80 60 1.9 -063-031 *185352.7 -040 * 145 60 2.8 -050 * 95 60 2.6 DED-1-bbb-ccc B L Li Weight, mm mm kg -014-008 55 35 0.18 -01035 350.25 -01225 350.24 -015-008 60 35 0.19 -01045 350.30 -01230 350.28 -01420 350,25 -016-01425 350.28 -01520 350.28 -018-01065 350.29 -01245 350.29 -01435 350.28 -01530 350.28 -01625 350.27 -020-014 55 35 0.34 -01545 350.34 -01825 350.33 -022-012 85 35 0.54 -01470 350.35 -01565 350.33 -01650 350.49 -01840 350.46 -02030 350.43 -025-014 80 35 0.46 -01575 350.61 -01860 350.55 -02230 350.51 -028-014 95 35 0.55 -01590 350.54 -01685 350.54 -01875 350.53 -02065 350.54 -02255 350.51 -02540 350.53 -030-015100 35 0.60 -01695 350.60 -01885 350.60 -02075 350.60 -02265 350.57 -02550 350.59 -02835 350.56 DED-1-bbb-ccc B L Li Weight, mm mm kg -031-015110 350.65 -01895 350.64 -02270 350.62 -02845 350.61 -03035 350.59 -035-018 115 35 1.2 -020105 35 1.2 -02290 35 1.2 -02580 35 1.1 -02865 35 1.1 -03055 35 1.1 -03145 35 1.0 -040-022 115 35 1.3 -02885 35 1.3 -03075 35 1.3 -03555 60 1.5 -045-022 40 35 1.6 -025125 35 1.7 -028110 35 1.6 -030100 35 1.6 -03195 35 1.6 -03580 60 1.8 -04055 60 1.7 -050-028 135 35 1.9 -030125 35 1.8 035105 60 2.0 -04555 60 1.9 056-028165 35 2.2 -030155 35 2.2 -031150 35 2.2 -035135 60 2.4 -040110 60 2.3 -04585 60 2.3 -05060 60 2.1 -063-030 190 35 2.7 -035170 60 2.9 -045120 60 2.8 -05665 60 2.4 *) normal Veloduct sealing Li Fläkt Woods 3374 GB 2017.05.10 Specifications are subject to alteration without notice 36 VELODUCT® - Product Catalouge Round ducting REDUCER BDED-3 - REDUCER, CONCENTRIC, INSERTION - INSERTION Lp bbb Li ccc STANDARD SIZES OTHER SIZES OTHER SIZES DED-3-bbb-ccc B L Lp/Li Weight, mm mm kg -008-006 40 35/350.11 -010-006 50 35/350.15 -008 25 35/350.15 -012-006 60 35/350.22 -008 40 35/350.22 -010 25 35/350.22 -016-008 60 35/350.28 -010 45 35/350.28 -012 35 35/350.28 -020-010 70 35/350.36 -012 55 35/350.36 -016 35 35/350.36 -025-012 85 35/350.55 -016 65 35/350.55 -020 40 35/350.55 -031-016 100 35/350.75 -020 80 35/350.75 -025 50 35/350.75 -040-020 * 135 60/35 1.4 -025 * 95 60/35 1.3 -031 * 65 60/35 1.2 -050-025 * 160 60/35 1.9 -031 * 130 60/35 1.8 -040 * 90 60/60 1.9 -063-031 * 195 60/35 2.7 -040 * 155 60/60 2.8 -050 * 105 60/60 2.6 DED-3-bbb-ccc B L Lp/Li Weight, mm mm kg -014-008 60 35/350.18 -010 30 35/350.25 -012 20 35/350.24 -015-008 65 35/350.19 -010 40 35/350.30 -012 25 35/350.28 -014 35 35/350.25 -016-014 20 35/350.28 -015 15 35/350.28 -018-010 55 35/35 0.29 -012 40 35/350.29 -014 30 35/350.28 -015 25 35/350.28 -016 20 35/350.27 -020-014 45 35/350.34 -015 35 35/350.34 -018 20 35/350.33 -022-012 75 35/350.54 -014 75 35/350.35 -015 70 35/350.33 -016 45 35/350.49 -018 30 35/350.46 -020 20 35/350.43 -025-014 85 35/350.46 -015 65 35/350.61 -018 50 35/350.55 -022 25 35/350.51 -028-014 100 35/350.55 -015 95 35/350.54 -016 90 35/350.54 -018 80 35/350.53 -020 70 35/350.54 -022 60 35/350.51 -025 45 35/350.53 -030-015 105 35/350.60 -016 100 35/350.60 -018 90 35/350.60 -020 80 35/350.60 -022 70 35/350.57 -025 55 35/350.59 -028 40 35/350.56 DED-3-bbb-ccc B L Lp/Li Weight, mm mm kg -031-015 115 35/35 0.65 -018 100 35/350.64 -022 75 35/350.62 -028 50 35/350.61 -030 40 35/350.59 -035-018 12560/351.2 -020 11560/351.2 -022 10060/351.1 -025 9060/351.1 -028 7560/351.1 -030 6560/351.1 -031 55 60/351.0 -040-022 12560/351.3 -028 95 60/351.3 -030 85 60/351.3 -035 65 60/601.5 -045-022 15060/351.6 -025 13560/351.7 -028 12060/351.6 -030 11060/351.6 -031 10560/351.6 -035 90 60/601.8 -040 6560/601.7 -050-028 14560/351.9 -030 13560/351.8 -035 11560/602.0 -045 65 60/601.9 -056-028 17560/352.2 -030 16560/352.2 -031 16060/352.2 -035 14560/602.4 -040 12060/602.3 -045 95 60/602.3 -050 70 60/602.1 -063-030 200 60/35 2.7 -035 18060/602.9 -045 13060/602.8 -056 75 60/602.4 *) normal Veloduct sealing L Fläkt Woods 3374 GB 2017.05.10 Specifications are subject to alteration without notice VELODUCT® - Product Catalouge 37 Round ducting REDUCER BDED-2 - REDUCER, ECCENTRIC, FIT-ON - INSERTION BDED-4 - REDUCER, ECCENTRIC, INSERTION - INSERTION L p L Li Lp Li ccc ccc bbb Fläkt Woods bbb STANDARD SIZES STANDARD SIZES BDED-2-bbb-ccc Lp/Li Weight, mm kg BDED-4-bbb-ccc L Lp/Li Weight, mm mm kg -040-02060/35 -02560/35 -03160/35 1.2 1.2 1.2 -040-0202560/35 1.2 -0252560/35 1.2 -0312560/35 1.2 -050-02560/35 -03160/35 -04060/60 1.7 1.7 1.6 -050-0254060/35 1.7 -0314060/35 1.7 -0404560/60 1.6 -063-03160/35 -04060/60 -05060/60 2.4 2.4 2.4 -063-0314060/35 2.4 -0404560/60 2.4 -0503560/60 2.4 -080-04095/60 5.3 -05095/60 4.9 -06395/60 4.4 -080-0405095/60 5.3 -0505095/60 4.9 -0635095/60 4.4 -100-05095/60 7.4 -06395/60 6.8 -08095/95 6.6 -100-0505095/60 7.4 -0635095/60 6.8 -0805095/95 6.6 -125-06395/60 -08095/95 -10095/95 -125-0635095/60 11 -0805095/95 10 -1005095/95 8.7 3374 GB 2017.05.10 11 10 8.7 Specifications are subject to alteration without notice 38 VELODUCT® - Product Catalouge Round ducting REDUCER BDEF-1 - REDUCER, LONG, CONCENTRIC, FIT-ON - INSERTION Lp bbb L Li ccc STANDARD SIZES OTHER SIZES OTHER SIZES DEF-1-bbb-ccc B L Lp/Li Weight, mm mm kg -010-008 60 35/350.19 -012-008 95 35/350.25 -010 65 35/350.22 -016-008 140 35/350.36 -010 115 35/350.33 -012 80 35/350.30 -020-010 170 35/350.55 -012 135 35/350.54 -016 85 35/350.46 -025-012 205 35/350.86 -016 155 35/350.79 -020 100 35/350.70 -031-016 24535/351.2 -02019035/351.1 -02512035/351.0 -040-020 31060/352.5 -025 24560/352.3 -031 15560/351.9 -050-025 380 60/35 3.6 -031 29060/353.2 -040 18060/602.9 -063-031 47060/355.2 -040 36060/605.0 -050 22060/60 4.1 -080-040 59595/609.3 -050 46095/608.4 -063 28095/606.9 -100-050 73595/60 16 -063 55595/60 14 -080 32595/95 12 -125-063 90095/60 23 -080 67095/95 21 -100 39595/95 16 DEF-1-bbb-ccc B L Lp/Li Weight, mm mm kg -014-008 115 35/350.29 -010 85 35/350.27 -012 55 35/350.25 -015-008 130 35/350.32 -010 100 35/350.30 -012 65 35/350.26 -014 45 35/350.24 -016-014 60 35/350.28 -015 45 35/350.26 -018-010 140 35/350.47 -012 110 35/350.42 -014 85 35/350.39 -015 75 35/350.37 -016 60 35/350.35 -020-014 115 35/350.51 -015 100 35/350.48 -018 60 35/350.42 -022-010 200 35/350.70 -012 170 35/350.66 -014 145 35/350.63 -015 135 35/350.60 -016 120 35/350.58 -018 90 35/350.53 -020 65 35/350.49 -025-014 185 35/350.83 -015 170 35/350.80 -018 130 35/350.74 -022 70 35/350.61 -028-014 22535/351.0 -01521035/351.0 -01619535/350.99 -01817035/350.94 -02014035/350.90 -02211035/350.81 -0257535/350.67 -030-015 24035/351.2 -01622535/351.1 -01819535/351.1 -02017035/351.0 -02213535/350.95 -02510035/350.90 -0286035/350.77 DEF-1-bbb-ccc B L Lp/Li Weight, mm mm kg -031-015 26035/351.3 -01822035/351.2 -02215535/351.1 -0288035/350.88 -0305535/350.81 -035-018 27060/352.0 -020 24560/352.0 -022 21060/351.9 -025 17560/351.8 -028 13560/351.6 -030 11060/351.5 -031 85 60/351.4 -040-02228060/352.3 -028200 60/352.1 -030175 60/352.0 -035 10060/601.9 -045-02235060/353.0 -025310 60/352.9 -028270 60/352.8 -030245 60/352.7 -031225 60/352.6 -035 17060/602.6 -040 11060/602.3 -050-028 340 60/353.4 -030310 60/353.3 -035 23560/603.2 -045 11060/602.6 -056-028 42060/354.3 -030395 60/354.2 -031375 60/354.1 -035 32060/60 4.1 -040 26060/603.8 -045 19560/603.5 -050 12560/602.9 -063-030 49060/355.4 -035 41560/605.3 -045 29060/604.6 -056 14060/603.4 Fläkt Woods 3374 GB 2017.05.10 Specifications are subject to alteration without notice VELODUCT® - Product Catalouge 39 Round ducting REDUCER BDEF-2 - REDUCER, LONG, ECCENTRIC, FIT-ON - INSERTION Lp L Li ccc bbb STANDARD SIZES OTHER SIZES OTHER SIZES DEF-2-bbb-ccc B L Lp/Li Weight, mm mm kg -008-006 55 35/350.15 -010-006 85 35/350.18 -008 60 35/350.19 -012-006 115 35/350.24 -008 95 35/350.25 -010 65 35/350.22 -016-008 140 35/350.36 -010 115 35/350.33 -012 80 35/350.30 -020-010 170 35/350.55 -012 135 35/350.54 -016 85 35/350.46 -025-012 205 35/350.86 -016 155 35/350.79 -020 100 35/350.70 -031-016 24535/351.2 -020 19035/351.1 -025 12035/351.0 -040-020 31060/352.5 -025245 60/352.3 60/351.9 -031155 -050-02538060/353.6 -031290 60/353.2 -040 18060/602.9 -063-03147060/355.2 -040 36060/605.0 -050 22060/60 4.1 -080-040 59595/609.3 -050 46095/608.4 -063 28095/606.9 -100-050 73595/60 16 -063 55595/60 14 -080 32595/95 12 -125-063 90095/60 23 -080 67095/95 21 -100 39595/95 16 DEF-2-bbb-ccc B L Lp/Li Weight, mm mm kg -014-008 115 35/350.29 -0108535/350.27 -0125535/350.25 -015-008 13035/350.32 -01010035/350.30 -0126535/350.26 -0144535/350.24 -016-014 6035/350.28 -0154535/350.26 -018-010 14035/350.47 -01211035/350.42 -0148535/350.39 -0157535/350.37 -0166035/350.35 -020-014 11535/350.51 -01510035/350.48 -0186035/350.42 -022-010 200 35/350.70 -01217035/350.66 -01414535/350.63 -01513535/350.60 -01612035/350.58 -0189035/350.53 -0206535/350.49 -025-014 18535/350.83 -01517035/350.80 -01813035/350.74 -0227035/350.61 -028-014 225 35/351.0 -01521035/351.0 -01619535/350.99 -01817035/350.94 -02014035/350.90 -02211035/350.81 -0257535/350.67 -030-015 24035/351.2 -016 22535/35 1.1 -018 19535/351.1 -020 17035/351.0 -022 135 35/350.95 -025 100 35/350.90 -028 60 35/350.77 DEF-2-bbb-ccc B L Lp/Li Weight, mm mm kg -031-015 26035/351.3 -01822035/351.2 -02215535/351.1 -0288035/350.88 -0305535/350.81 -035-018 270 60/35 2.0 -020 24560/352.0 -022 21060/351.9 -025 17560/351.8 -028 13560/351.6 -030 11060/351.5 -031 85 60/351.4 -040-022 28060/352.3 -028 20060/35 2.1 -030 17560/352.0 -03510060/601.9 -045-022 35060/353.0 -025 31060/352.9 -028 27060/352.8 -030 24560/352.7 -031 22560/352.6 -03517060/602.6 -04011060/602.3 -050-028 34060/353.4 -030 31060/353.3 -03523560/603.2 -04511060/602.6 -056-028 42060/354.3 -030 39560/354.2 -031 37560/35 4.1 -03532060/604.1 -04026060/603.8 -04519560/603.5 -05012560/602.9 -063-030 490 60/35 5.4 -03541560/605.3 -04529060/604.6 -05614060/603.4 Fläkt Woods 3374 GB 2017.05.10 Specifications are subject to alteration without notice 40 VELODUCT® - Product Catalouge Round ducting REDUCER BDEF-3 - REDUCER, LONG, CONCENTRIC, INSERTION - INSERTION Li bbb L Li ccc STANDARD SIZES OTHER SIZES OTHER SIZES DEF-3-bbb-ccc B L Li Weight, mm mm kg -010-008 60 35 0.19 -012-008 95 35 0.25 -01065 350.22 -016-008140 35 0.36 -010115 350.33 -01280 350.30 -020-010170 35 0.55 -012135 35 0.54 -01685 350.46 -025-012205 35 0.86 -016155 35 0.79 -020100 35 0.70 -031-016 245 351.2 -020190 351.1 -025120 351.0 -040-020 31060/352.5 -025 24560/352.3 -031 15560/351.9 -050-025 380 60/35 3.6 -031 29060/353.2 -040180 60 2.9 -063-031 47060/355.2 -040360 60 5.0 -050220 60 4.1 -080-040 59595/609.3 -050 46095/608.4 -063 28095/606.9 -100-050 73595/60 16 -063 55595/60 14 -080325 95 12 -125-063 90095/60 23 -080670 95 21 -100395 95 16 DEF-3-bbb-ccc B L Li Weight, mm mm kg -014-008115 35 0.29 -01085 350.27 -01255 350.25 -015-008130 35 0.32 -010100 35 0.30 -01265 350.26 -01445 350.24 -016-01460 350.28 -01545 350.26 -018-010140 35 0.47 -012110 350.42 -01485 350.39 -01575 350.37 -01660 350.35 -020-014115 35 0.51 -015100 35 0.48 -01860 350.42 -022-010200 35 0.70 -012170 350.66 -014145 350.63 -015135 35 0.60 -016120 35 0.58 -01890 350.53 -02065 350.49 -025-014185 35 0.83 -015170 350.80 -018130 35 0.74 -02270 350.61 -028-014 225 351.0 -015210 351.0 -016195 350.99 -018170 350.94 -020140 350.90 -022110 350.81 -02575 350.67 -030-015 240 351.2 -016225 351.1 -018195 351.1 -020170 351.0 -022135 350.95 -025100 350.90 -02860 350.77 DEF-3-bbb-ccc B L Li Weight, mm mm kg -031-015260 35 1.3 -018220 351.2 -022155 351.1 -02880 350.88 -03055 350.81 -035-018 27060/352.0 -020 24560/352.0 -022 21060/351.9 -025 17560/351.8 -028 13560/351.6 -030 11060/351.5 -031 85 60/351.4 -040-02228060/352.3 -028200 60/352.1 -030175 60/352.0 -035100 60 1.9 -045-02235060/353.0 -025310 60/352.9 -028270 60/352.8 -030245 60/352.7 -031225 60/352.6 -035170 60 2.6 -040110 60 2.3 -050-028 340 60/353.4 -030310 60/353.3 -035235 60 3.2 -045110 60 2.6 -056-028 42060/354.3 -030395 60/354.2 -031375 60/354.1 -035320 60 4.1 -040260 60 3.8 -045195 60 3.5 -050125 60 2.9 -063-030 49060/355.4 -035415 60 5.3 -045290 60 4.6 -056140 60 3.4 Fläkt Woods 3374 GB 2017.05.10 Specifications are subject to alteration without notice VELODUCT® - Product Catalouge 41 Round ducting REDUCER BDEF-4 - REDUCER, LONG, ECCENTRIC, INSERTION - INSERTION Li L Li ccc bbb STANDARD SIZES OTHER SIZES OTHER SIZES DEF-4-bbb-ccc B L Li Weight, mm mm kg -008-006 55 35 0.15 -010-006 85 35 0.18 -00860 350.19 -012-006 115 35 0.24 -00895 350.25 -01065 350.22 -016-008140 35 0.36 -010115 350.33 -01280 350.30 -020-010170 35 0.55 -012135 35 0.54 -01685 350.46 -025-012205 35 0.86 -016155 35 0.79 -020100 35 0.70 -031-016245 35 1.2 -020190 35 1.1 -025120 35 1.0 -040-020 31060/352.5 -025245 60/352.3 60/351.9 -031155 -050-02538060/353.6 -031290 60/353.2 -040180 60 2.9 -063-03147060/355.2 -040360 60 5.0 -050220 60 4.1 -080-040 59595/609.3 -050 46095/608.4 -063 28095/606.9 -100-050 73595/60 16 -063 55595/60 14 -080325 95 12 -125-063 90095/60 23 -080670 95 21 -100395 95 16 DEF-4-bbb-ccc B L Li Weight, mm mm kg -014-008115 35 0.29 -01085 350.27 -01255 350.25 -015-008 130 350.32 -010100 350.30 -01265 350.26 -01445 350.24 -016-014 60 350.28 -01545 3350.26 -018-010 140 350.47 -012110 350.42 -01485 350.39 -01575 350.37 -01660 350.35 -020-014 115 350.51 -015100 350.48 -01860 350.42 -022-010 200 350.70 -012170 350.66 -014145 350.63 -015135 350.60 -016120 350.58 -01890 350.53 -02065 350.49 -025-014 185 350.83 -015170 350.80 -018130 350.74 -02270 350.61 -028-014 225 351.0 -015210 351.0 -016195 350.99 -018170 350.94 -020140 350.90 -022110 350.81 -02575 350.67 -030-015240 35 1.2 -016225 35 1.1 -018195 35 1.1 -020170 35 1.0 -022135 35 0.95 -025100 35 0.90 -02860 350.77 DEF-4-bbb-ccc B L Li Weight, mm mm kg -031-015260 35 1.3 -018220 351.2 -022155 351.1 -02880 350.88 -03055 350.81 -035-018 270 60/35 2.0 -020 24560/352.0 -022 21060/351.9 -025 17560/351.8 -028 13560/351.6 -030 11060/351.5 -031 85 60/351.4 -040-022 28060/352.3 -028 20060/35 2.1 -030 17560/352.0 -035100 601.9 -045-022 35060/353.0 -025 31060/352.9 -028 27060/352.8 -030 24560/352.7 -031 22560/352.6 -035170 602.6 -040110 602.3 -050-028 34060/353.4 -030 31060/353.3 -035235 603.2 -045110 602.6 -056-028 42060/354.3 -030 39560/354.2 -031 37560/35 4.1 -035320 604.1 -040260 603.8 -045195 603.5 -050125 602.9 -063-030 490 60/35 5.4 -035415 605.3 -045290 604.6 -056140 603.4 Fläkt Woods 3374 GB 2017.05.10 Specifications are subject to alteration without notice 42 VELODUCT® - Product Catalouge Round ducting REDUCER BDKF-2 - REDUCER, ECCENTRIC, FIT-ON - INSERTION Lp L BDKF-4 - REDUCER, ECCENTRIC, INSERTION - INSERTION Li Li Li L ccc ccc bbb bbb STANDARD SIZES STANDARD SIZES BDKF-2-bbb-ccc(-T) L Lp/Li Weight, mmmm kg BDKF-4-bbb-ccc(-T) L Li Weight, mmmm kg -040-020 (-T) -025 (-T) -031 (-T) 200 200 200 60/35 60/35 60/35 2.1 2.2 2.3 -040-020 (-T) -025 (-T) -031 (-T) 200 200 200 60/35 60/35 60/35 2.1 2.1 2.3 -050-025 (-T) -031 (-T) -040 (-T) 250 250 250 60/35 60/35 60/60 3.0 3.2 3.7 -050-025 (-T) -031 (-T) -040 (-T) 250 250 250 60/35 60/35 60 3.0 3.2 3.7 -063-031 (-T) -040 (-T) -050 (-T) 315 315 290 60/35 60/60 60/60 4.4 5.0 5.3 -063-031 (-T) -040 (-T) -050 (-T) 315 315 290 60/35 60 60 4.4 5.0 5.1 -080-040 (-T) -050 (-T) -063 (-T) 400 400 400 95/60 95/60 95/60 8.7 9.1 10.9 -080-040 (-T) -050 (-T) -063 (-T) 400 400 400 95/60 95/60 95/60 8.7 9.1 10.9 -100-050 (-T) -063 (-T) -080 (-T) 500 500 500 95/60 95/60 95/95 14.4 14.9 17.5 -100-050 (-T) -063 (-T) -080 (-T) 500 500 500 95/60 95/60 95 14.4 14.9 17.5 -125-063 (-T) -080 (-T) -100 (-T) 630 630 630 95/60 95/95 95/95 20.9 23.5 25.1 -125-063 (-T) -080 (-T) -100 (-T) 630 630 630 95/60 95 95 20.9 23.5 25.1 T in the code: separate packing (M1) Fläkt Woods 3374 GB 2017.05.10 T in the code: separate packing (M1) Specifications are subject to alteration without notice VELODUCT® - Product Catalouge 43 Round ducting LID BDEG-1 - LID, FIT - ON BDEG-4 - LID, INSERTION L Lp bbb bbb Li STANDARD SIZES STANDARD SIZES BDEG-1-bbb Lp Weight, mmkg BDEG-4-bbb L Li Weight, mmmm kg -006 -008 -010 350.05 400.07 400.11 -008 1535 0.10 -010 1735 0.10 -012 1735 0.10 -012 -016 -020 400.14 400.25 400.32 -016 1735 0.20 -020 1535 0.30 -025 1535 0.60 -025 -031 -040 400.47 400.71 401.4 -031 1535 0.90 -040 1635 1.2 -050 * 30 60 2.2 -050 -063 -080 ** 451.9 702.9 95 5.8 -063 * -080 ** -100 ** 30 30 30 60 95 95 3.1 6.1 8.5 95 95 -125 ** 30 95 12.0 -100 ** -125 ** 8.2 11.4 **) Fabricated Fläkt Woods *) Veloduct sealing **) Fabricated + Veloduct sealing OTHER SIZES OTHER SIZES BDEG-1-bbb Lp Weight, mmkg BDEG-4-bbb L Li Weight, mmmm kg -014 -015 -018 350.15 350.15 350.27 -014 1535 0.24 -015 1535 0.25 -018 1535 0.37 -022 -028 -030 350.32 350.53 350.66 -022 2035 0.50 -028 2035 0.55 -030 2035 0.77 -035 -045 -056 601.2 601.7 602.4 -035 2060 1.4 -045 3060 2.0 -056 3060 2.9 3374 GB 2017.05.10 Specifications are subject to alteration without notice 44 VELODUCT® - Product Catalouge Round ducting CLEANING COVER BDEG-2 - CLEANING COVER, INSULATED, INSERTION BDEG-3 - CLEANING COVER, INSERTION Lp Lp bbb bbb 20-30 FIRE RESISTANCE CLASS E 60 (EI 60)1) 20-30 FIRE RESISTANCE CLASS E 60 (EI 60)1) BDEG-2-bbb Lp Weight, mmkg BDEG-3-bbb Lp Weight, mmkg -010 350.29 -012 350.35 -016 350.49 -010 350.17 -012 350.22 -016 350.28 -020 350.73 -025 351.10 -031 351.50 -020 350.35 -025 350.50 -031 350.74 1)In accordance with BBR 5:6213, the cover may be used where components to fire resistance class EI 60 are required provided that the cover is installed at a min. distance of 500 mm from an escape route and at a min. distance of 200 mm from any combustible material. If the fire resistance requirement is EI 30, the correspond ing protective distance must be at least 400 mm (escape route) and 150 mm (combustible material) respectively. 1)In THE TYPE APPROVAL FOR FIRE RESISTANCE CLASS DOES NOT APPLY TO THE COMPONENT BELOW. THE TYPE APPROVAL FOR FIRE RESISTANCE CLASS DOES NOT APPLY TO THE COMPONENT BELOW. Fläkt Woods accordance with BBR 5:6213, the cover may be used where components to fire resistance class EI 60 are required provided that the cover is installed at a min. distance of 500 mm from an escape route and at a min. distance of 200 mm from any combustible material. If the fire resistance requirement is EI 30, the correspond ing protective distance must be at least 400 mm (escape route) and 150 mm (combustible material) respectively. XDEG-2-bbb Lp Weight, mmkg XDEG-3-bbb Lp Weight, mmkg 3374 GB 2017.05.10 -040603.4 -050604.7 -063606.9 -040601.5 -050602.0 -063602.8 Specifications are subject to alteration without notice VELODUCT® - Product Catalouge 45 Round ducting CLEANING COVER BDEG-4 - CLEANING COVER WITH HANDLE, INSERTION BDEG-4 - CLEANING COVER WITH HANDLE, INSULATED, INSERTION L bbb L bbb Li STANDARD SIZES Fläkt Woods Li STANDARD SIZES BDEB-4-bbb-K L Li Weight mm mm kg BDEG-4-bbb-KE L Li Weight mm mm kg -010 15350.20 -012 15350.29 -016 1535 0.34 -010 -012 -016 1535 0.25 1535 0.36 1535 0.46 -020 2035 0.42 -025 2035 0.65 -031 2035 1.0 -020 -025 -031 2035 0.60 2035 0.93 2035 1.43 -040 3060 1.5 -050 3060 2.0 -063 3060 3.1 -040 -050 -063 3060 2.22 3060 3.12 3060 4.88 3374 GB 2017.05.10 Specifications are subject to alteration without notice 46 Round ducting VELODUCT® - Product Catalouge CLEANING COVER BDEG-7 - CLEANING COVER WITH MOUNTING RING, INSULATED, INSERTION, STANDARD SIZES BDEG-7-bbb Weight, kg 0100.35 0120.40 0160.70 0200.90 0251.40 0312.00 Fläkt Woods 3374 GB 2017.05.10 Specifications are subject to alteration without notice VELODUCT® - Product Catalouge 47 Round ducting CLEANING COVER BDKL-1 - CLEANING COVER FOR SUBSEQUENT INSTALLATION ON CIRCULAR DUCT Size 010 - 050 BDKP-3 - CLEANING COVER, INSERTION Size of opening 1C85 (010-016) 300 (020-031) 400 (040-050) 500 (063-100 Size 063 - 100 Size 125 STANDARD SIZES STANDARD SIZES BDKL-1-bbb B C Weight, mmmm kg BDKP-3-bbb B C L Li Weight, mm mm mm mm kg -010 85185 0.25 -012 85185 0.25 -016 85185 0.25 -010 -012 -016 85 185250 35 0.8 85 185250 35 0.9 85 185250 35 1.0 -020 100300 0.55 -025 100300 0.55 -031 100300 0.55 -020 -025 -031 100 300315 35 1.8 100 300315 35 2.1 100 300315 35 3.2 -040 200400 -050 200400 -063 400500 1.4 1.4 4.8 -040 -050 -063 200 400415 60 4.9 200 400415 60 6.0 400 500540 60 12.2 -080 400500 -100 400500 -125 400500 4.8 4.8 3.1 Fläkt Woods 3374 GB 2017.05.10 Specifications are subject to alteration without notice 48 VELODUCT® - Product Catalouge Round ducting CLEANING COVER L A, As Cover cc BDBL-1 - CLEANING COVER FOR SUBSEQUENT INSTALLATION ON CIRCULAR DUCT, INSULATED B Frame Bs Seal BDBL-1-bbb-cc cc = thickness of insulation (heat and fire) 03 = 30 mm 06 = 60 mm 04 = 40 mm 08 = 80 mm 05 = 50 mm 10 = 100 mm STANDARD SIZES BDBL-1-bbb-cc Opening (mm) Weight (kg) inner outer -cc (cm) -bbb AsBs A B L 030405060810 -010 3601004002004502.12.32.52.72.83.2 -012 3601004002004502.12.32.52.72.83.2 -016 3601004002004502.12.32.52.72.83.2 -020 360100400200450 - 2.32.52.72.83.2 -025 360100400300450 - 2.9 3.1 3.4 3.8 4.1 -031 360200400300450 - 2.9 3.1 3.4 3.8 4.1 -040 360200400300450 - - 3.1 3.4 3.8 4.1 -050 360200400300450 - - 3.1 3.4 3.8 4.1 -063 500300500400530 - - 5.8 6.4 7.1 7.7 -080 500300500400530 - - 5.8 6.4 7.1 7.7 -100 500300500400530 - - 5.8 - 7.1 7.7 -125 500300500400530 - - 5.8 - 7.1 7.7 Fläkt Woods 3374 GB 2017.05.10 Specifications are subject to alteration without notice VELODUCT® - Product Catalouge 49 Round ducting BRANCH BDEC-1 – BRANCH XDEZ-05 – BRANCH FOR INSULATION Li L bbb bbb L STANDARD SIZES BDEC-1-bbb L Li Weight, mmmm kg -006 -008 -010 15350.04 15350.06 15350.06 -008 500.23 -010 500.26 -012 500.38 -012 -016 -020 15350.07 15350.09 1535 0.14 -016 500.45 -020 500.65 -025 500.89 -025 -031 -040 15350.22 15350.28 20600.68 -03150 1.2 -04050 1.6 -05050 1.8 -050 -063 -080 20600.85 2060 1.1 2595 2.3 -063502.2 -100 -125 2595 2.6 2595 3.2 Fläkt Woods XDEZ-05-bbb -10 L Weight, mmkg -008 1000.28 -010 1000.32 -012 1000.46 L Li Weight, mmmm kg -016 1000.55 -020 1000.80 -025100 1.1 OTHER SIZES BDEC-1-bbb STANDARD SIZES XDEZ-05-bbb-05 L Weight, mmkg -014 -015 -018 15350.08 15350.08 1535 0.11 -031100 1.4 -0401002.0 -0501002.2 -022 -028 -030 1535 0.15 15350.25 15350.27 -0631002.6 -035 -045 -056 20600.63 20600.82 20600.95 3374 GB 2017.05.10 Specifications are subject to alteration without notice 50 VELODUCT® - Product Catalouge Round ducting WEATHERING COWL & CEILING AND WALL BRANCH XBEZ-71 - WEATHERING COWL BDEZ-43 - CEILING AND WALL BRANCH bbb øD H 41 * Fit-on measure that fits outside pipes or detail. * bbb STANDARD SIZES T he size of the plate is 255 x 255 mm and the hole size for the insertion branch is: STANDARD SIZES XBEZ-71-bbb ø D H Weight mmmm kg -010 -012 -016 200 225 260 90 95 130 0,30 0,38 0,63 -020 -025 -031 310 370 435 140 205 215 0,72 1,1 1,4 BDEZ-43-bbb mm -010100 -012125 -016160 PRESSURE DROP 100 50 q, m3/h 100 200 500 1000 2000 50 30 20 Size 25 5 10 Fläkt Woods 20 q, l/s 3374 GB 2017.05.10 50 100 031 025 020 016 012 010 10 200 LA, dB( A) 20 500 Specifications are subject to alteration without notice VELODUCT® - Product Catalouge 51 Round ducting INLET CONE WITH PROTECTIVE NET EXTRACT AIR 50 30000 050 063 080 5000 10000 100 125 40 35 30 , dB (A) Lp 10A 20 ∆pt, Pa 500 1000 010 012 100 q, m3/h 100 200 025 031 040 50 016 020 BDKU - INLET CONE WITH PROTECTIVE NET 25 20 10 5 4 3 2 1 STANDARD SIZES 10 20 50 qv, l/s BDKU-aaa A L Li Weight, mmmmmm kg SUPPLY AIR Lp 100 080 063 050 040 30000 125 30 5000 10000 025 031 500 1000 020 50 -080 905120 95 3.6 -100 1120120 95 4.5 -125 1410145 95 5.8 40 35 016 -040 4558060 1.0 -050 56580 60 1.1 -063 69593 60 1.5 q, m3/h 100 200 , dB (A) 100 50 10A -020 2707035 0.3 -025 3157035 0.4 -031 3707035 0.5 25 20 20 ∆pt, Pa 500 1000 2000 5000 10000 010 012 -010 17070350.18 -012 19070350.21 -016 23070 350.26 100 200 10 5 4 3 2 1 Fläkt Woods 3374 GB 2017.05.10 10 20 50 qv, l/s 100 200 500 1000 2000 5000 10000 Specifications are subject to alteration without notice 52 VELODUCT® - Product Catalouge Round ducting BRANCH WITH MESH XDEA-5 – BRANCH WITH MESH Li XDEA-6 – BRANCH WITH MESH Li bbb bbb r STANDARD SIZES Fläkt Woods STANDARD SIZES XDEA-5-bbb-10 r LiWeight, mmmm kg XDEA-6-bbb-10 LiWeight, mmkg -008 -010 -012 1035 0.18 15350.25 20350.36 -008 350.15 -010 350.17 -012 350.25 -016 -020 -025 2535 0.51 25350.68 2535 0.97 -016 350.33 -020 350.47 -025 350.67 -031 -040 -050 2535 1,4 3060 2.0 3060 2.7 -031 350.94 -04060 1.4 -050602.0 -063 3060 3.7 -063603.0 3374 GB 2017.05.10 Specifications are subject to alteration without notice VELODUCT® - Product Catalouge Round ducting 53 SUPPLY AIR NOZZLE XBEZ-72 – SUPPLY AIR NOZZLE ø50 110 bbb Li 60 STANDARD SIZES XBEZ-72-bbb LiWeight, mm kg 40 250 -01035 0.38 q, m3/h 50 180 100 40 200 dB 30 L A, Si ze 01 0 100 (A ) 35 25 50 ∆pt, Pa 20 25 Fläkt Woods 3374 GB 2017.05.10 10 q, l/s 20 30 40 50 Specifications are subject to alteration without notice 54 VELODUCT® - Product Catalouge Round ducting FLANGE & BRACKET EBGA-2 - FLANGE, GALVANIZED (SIZES 031 - 160 EUROVENT 1/2) BDSK – BRACKET, GALVANIZED ØG - n pieces Sizes 008 - 031 Sizes 040 - 125 STANDARD SIZES STANDARD SIZES EBGA-2-bbb Ds E T H G n Weight, mm mmmmmm mm kpl kg BDSK-aaa Ds ØG L T Weight, mm mmmm mm kg -010 106 1404 30 11 6 -012 131 1654 30 11 6 -016 166 2004 30 11 8 0.4 0.5 0.6 -008 -010 -012 83 11 301.25 0.09 103 11 301.25 0.11 128 11 301.25 0.14 -020 206 2404 30 11 8 -025 256 2904 30 11 8 -031 319 3556 35 10 8 0.7 0.8 1.9 -016 163 11 301.25 0.17 -020 20311301.5 0.25 -025 25011301.5 0.30 -040 406 4506 40 12 8 -050 506 5606 50 12 12 -056 566 6206 50 12 12 2.6 3.5 4.6 -031 314 11302.0 0.51 -040 39811302.0 0.66 -050 498 11302.0 0.81 -063 636 6906 50 12 12 -071 716 7706 50 12 16 -080 806 8606 50 12 16 5.1 5.7 6.3 -063 62810302.0 1.02 -080 798 10253.0 1.58 -100 99810253.0 1.96 -090 908 9706 60 15 16 8.6 -100 100810706 60 15 16 9.5 -112 112811906 60 15 20 10.5 -125 119810253.0 2.43 -125 125813206 60 15 20 11.7 -140 140814706 60 15 20 13.1 -160 160816808 60 19 24 14.9 Fläkt Woods 3374 GB 2017.05.10 Specifications are subject to alteration without notice VELODUCT® - Product Catalouge Round ducting 55 PROTECTIVE CAP BDEZ – PLASTIC PROTECTIVE CAP, PUSHED DIMENSION INSERTION L bbb STANDARD SIZES BDEZ-02-bbb L Weight, mm kg -00615 0.01 -00810 0.01 -01012 0.01 -01215 0.02 -01615 0.03 -02030 0.08 -02520 0.10 -03130 0.14 -04040 0.35 -05045 0.73 Fläkt Woods 3374 GB 2017.05.10 Specifications are subject to alteration without notice 56 VELODUCT® - Product Catalouge Round ducting T-PIECE WITH DIFFUSER MOUNTING RING, LOW HEIGHT XCET –T-PIECE WITH DIFFUSER MOUNTING FRAME, LOW HEIGHT d2 r H d1 L Li STANDARD SIZES Product code d1d2H L r Li Weight, nom.nom.mmmmmm mm kg XCET-257 Fläkt Woods 3374 GB 2017.05.10 010 010 95 90 10 35 0.4 Specifications are subject to alteration without notice VELODUCT® - Product Catalouge 57 Round ducting BRANCH XCEA – BRANCH, INSERTION, WITH NAIL FLANGE XCEA – BRANCH, INSERTION, WITH DIFFUSER MOUNTING FRAME, INTENDED FOR FACTORY CASTING “FILIGRANBRANCH” 10 10 STANDARD SIZES STANDARD SIZES Product code D Li Weight, nom. mm kg Product code XCEA-270 XCEA-296 XCEA-297 010350.09 01235 0.11 01635 0.15 XCEA-313 XCEA-312 Fläkt Woods D 65 Lp 10 D D XCEA – BRANCH, INSERTION, WITH NAIL FLANGE, INTENDED FOR FACTORY CASTING “FILIGRANBRANCH” 3374 GB 2017.05.10 65 STANDARD SIZES D nom. 010 012 Weight, kg 0.19 0.21 Product code D nom. Weight, kg XCEA-314 XCEA-315 XCEA-316 010 012 016 0.19 0.24 0.30 Specifications are subject to alteration without notice 58 VELODUCT® - Product Catalouge Round ducting ADJUSTING DAMPER BDEP-1 Sizes 008 - 035 Sizes 040 - 063 STANDARD SIZES OTHER SIZES DEP-1-bbb-c B L A B Li Weight, mmmmmmmm kg DEP-1-bbb-c B L A B Li Weight, mmmmmmmm kg -008 -010 -012 13580 40 35 0.30 13590 50 35 0.34 135100 65 35 0.42 -014 -015 -018 14595 70 35 0.43 135100 75 35 0.44 135115110 35 0.46 -016 -020 -025 135120100 35 0.46 135140120 35 0.82 125165145 35 1.2 -022 -028 -030 135135130 35 0.90 125165160 35 1.4 125175170 35 1.5 -031 -040 -050 125195175 35 160270220 60 160320270 60 1.5 2.7 3.9 -035 -045 -056 160245195 60 160295245 60 160350300 60 -063 160385335 60 5.2 2.5 3.6 4.7 PRESSURE DROP CHARTS BDEP-1, -10, -13, -18 AND -19 60° 50° 40° Lwt = 70 dB Total pressure drop ∆pt, Pa 200 100 50 50 40 20 Fläkt Woods Sizes 008 – 031 2 Air velocity, m/s 3374 GB 2017.05.10 5 60° 50° 10 15 40° L wt = 80 dB 200 60 1 α = 80° 70° 30° 20° 10 500 Total pressure drop ∆pt , Pa α = 90° 80° 70° 500 70 30° 20° 100 60 50 50 20 10 Sizes 040–063 1 2 5 10 15 Air velocity, m/s Specifications are subject to alteration without notice VELODUCT® - Product Catalouge 59 Round ducting ADJUSTING AND SHUT OFF DAMPER BDEP-4 Sizes 008 - 035 Sizes 040 - 063 STANDARD SIZES OTHER SIZES BDEP-4-bbb-c L A B Li Weight, mmmmmmmm kg BDEP-4-bbb-c L A B Li Weight, mmmmmmmm kg -008 1358040 350.30 -010 1359050 35 0.34 -012 13510065 35 0.42 -014 1459570 35 0.43 -015 13510075 35 0.44 -018 135115110 35 0.46 -016 -020 -025 135 120100 35 0.46 135140120 35 0.82 125165145 35 1.2 -022 -028 -030 135 135130 35 0.90 125 165160 35 1.4 125175170 35 1.5 -031 -040 -050 125195175 35 1.5 160 270220 60 2.7 160 320270 60 3.9 -035 -045 -056 160245195 60 2.5 160 295245 60 3.6 160 350300 60 4.7 -063 160 385335 60 5.2 PRESSURE DROP CHARTS BDEP-4, -40, -43, -46, -48 AND -49 α = 80° 500 70° 60° 50° 40° 30° α = 60° 500 50° 40° 30° 20° Lwt = 70 dB Fläkt Woods 60 100 50 50 20 Sizes 008 – 031 1 2 Air velocity, m/s 3374 GB 2017.05.10 5 10 15 Total pressure drop ∆p t, Pa Total pressure drop ∆pt, Pa 10° 10 Lwt = 70 dB 200 200 20° 60 100 50 50 20 10 Size 040 – 063 1 2 Air velocity, m/s 5 10 15 Specifications are subject to alteration without notice 60 VELODUCT® - Product Catalouge Round ducting ADJUSTING DAMPER WITH MOTOR CONTROL BDEP-10 AND BDEP-40 DAMPER WITH MOTOR BRACKET EXCL. MOTOR STANDARD SIZES BDEP-aa-bbb (aa = 10 / 40) Fläkt Woods -008 -010 -012 -016 -020 -025 -031 -040 -050 -063 3374 GB 2017.05.10 L mm A mm Li mm 135205 35 135215 35 135225 35 135245 35 135265 35 125290 35 125325 35 160365 60 160415 60 160480 60 Weight, kg excl. motor 0.60 0.65 0.75 1.0 1.2 1.6 2.0 3.7 5.0 6.0 BDEP-13 AND BDEP-43 BELIMO MOTOR TYPE LM... A ON-OFF STANDARD SIZES BDEP-aa-bbb (aa = 13 / 43) L mm A mm Li mm Weight, kg -008 -010 -012 135160 35 135170 35 135180 35 1.10 1.20 1.30 -016 -020 135200 35 135220 35 1.45 2.0 -025 -031 125245 35 125280 35 2.4 2.8 Specifications are subject to alteration without notice VELODUCT® - Product Catalouge 61 Round ducting ADJUSTING DAMPER WITH MOTOR CONTROL BDEP-18 AND BDEP-48 BELIMO MOTOR TYPE LF WITH SPRING RETURN BDEP-46 BELIMO MOTOR TYPE SF WITH SPRING RETURN STANDARD SIZES STANDARD SIZES BDEP-aa-bbb (aa = 18 / 48) L mm A mm Li mm Weight kg -008 13518535 -010 13519535 -012 13521035 2,1 2.2 2.3 -016 13522535 -020 13524535 -025 12527035 2.6 2.8 3.2 -031 12530535 3.6 BDEP-aa-bbb (aa = 46) L mm A mm Li mm -040 -050 -063 160365 60 160415 60 160480 60 Weight kg 7.0 8.3 9.3 BDEP-19 AND BDEP-49 BELIMO MOTOR TYPE SM... A ON-OFF STANDARD SIZES BDEP-aa-bbb (aa = 19 / 49) L mm A mm Li mm -040 16031560 -050 16036560 -063 16043060 Fläkt Woods 3374 GB 2017.05.10 Weight kg 4.1 5.5 6.5 Specifications are subject to alteration without notice 62 VELODUCT® - Product Catalouge Round ducting GENERAL The VELODUCT® system is a complete system of round ducting for which type approval for tightness class D according to EN 12237 has been granted. All duct fittings are equipped with a sealing ring made of EPDM rubber. VELODUCT® • permits rapid, easy and clean installation • can be installed in any climate • easy to balance • reduces operating cost • made of fireproof sheet steel THE SEAL The sealing principle is illustrated in the drawings below. These show an insertion fitting and a fit-on (tube) fitting. The seal is made of solid EPDM rubber and is fixed to the end of the fitting. The seal is highly resistant to moisture, airborne pollutants and solar radiation and can withstand continuous exposure to temperatures between -30°C and +80°C with an unimpaired function. DESIGN TYPE APPROVALS AND CERTIFICATES • Tightness and strength type approvals Veloduct sealing – SP Sveriges tekniska forskningsinstitut, number 1718/88, tightness class D1) – VTT Technical Research Centre of Finland, number VTTRTH-00007-10, tightness class C1) • Finnish M1 cleanliness Classification by The Building Information Foundation RTS1) Veloduct Twin sealing • CE marked (smoke control duct system) according to EN 121017:2011, EC Certificate of Conformity 0761-CPD-02771) 1) Certificates available at www.flaktwoods.com. Tube and fittings are marked with a type approval label. Fläkt Woods 3374 GB 2017.05.10 Specifications are subject to alteration without notice VELODUCT® - Product Catalouge 63 Round ducting GENERAL DIMENSIONS AND TOLERANCES (AS PER EUROPEAN STANDARD EN 1506) t1 D d Lp Size bbb D d3 Li D mm d mm d3 mm A m2 006 63.0– 63.5 61.8–62.3 80 0.003 008 80.0 – 80.5 78.8–79.3 100 0.005 010 100.0–100.5 98.8– 99.3 125 0.008 012 125.0–125.5 123.8–124.3 160 0.012 014 140.0–140.6 138.7–139.3 160 0.015 015 150.0–150.6 148.7–149.3 180 0.018 016 160.0–160.6 158.7–159.3 200 0.020 018 180.0 – 180.7 178.6–179.3 224 0.025 020 200.0–200.7 198.6–199.3 250 0.031 022 224.0–224.8 222.5–223.3 280 0.039 025 250.0–250.8 248.5–249.3 315 0.049 028 280.0–280.9 278.4–279.3 355 0.062 030 300.0 – 300.9 298.4–299.3 355 0.071 031 315.0–315.9 313.4–314.3 400 0.078 035 355.0 – 356.0 353.3–354.3 450 0.099 040 400.0–401.0 398.3–399.3 500 0.126 045 450.0–451.1 448.2–449.3 560 0.159 050 500.0–501.1 498.2–499.3 630 0.196 0.246 056 560.0-561.2 558.1-559.3 710 063 630.0–631.2 628.1–629.3 800 0.312 071 710.0 – 711.6 708.9-709.3 900 0.396 080 800.0–801.6 798.0–799.3 1000 0.502 090 900.0–902.0 897.0–899.3 1120 0.636 100 1000.0–1002.0 997.9–999.3 1200 0.785 112 1120.0 – 1122.5 1117.8–1119.3 1300 0.984 125 1250.0– 1252.5 1247.8–1249.3 1400 1.227 Li, Lp mm t1 tube BDEK t1 tube, EKOD 0.4 0.5 35 D Inner diameter, tubes and fit-on fittings d Outer diameter, insertion fittings d3Recommended diameter of opening A Cross-section area of duct Li Insertion length Lp Fit-on length t1 Sheet metal thickness, tubes 0.5 60 0.7 0.7 95 0.9 0.9 MATERIALS AND FINISH TOLERANCES Pipes and pipe components are made of hot-dip galvanized sheet steel in accordance with EN 10346 with a zinc thickness of 275 g/m2 (double sided). This sheet is suitable for use in an environment with corrosivity class C2 in accordance with ISO 9223 and/or environmental class M2 in accordance with VVS AMA 98. Sheet metal thickness according to SS-EN 10143 Weight ± 10% Length. The following tolerances are applicable to the basic dimensions specified. Basic dimensions, mm Tolerance, mm ≤ 15 (15) – 100 > 100 0 0 0 –2 –5 –10 The tolerance of the bends is ±2°. Fläkt Woods 3374 GB 2017.05.10 Specifications are subject to alteration without notice 64 Round ducting VELODUCT® - Product Catalouge PRESSURE DROP CHARTS Basic calculation data for ducts and duct components having cross-section to Eurovent 2/3 and design to Eurovent 2/4. The rated nominal air flow resistance (pnom) should be corrected with regard to leakage and fan connection. ΣΔptot = Δpnom + Δpleakage + Δpfan conn. The air flow resistances are charted directly in Pa. • The data in the charts refer to total pressure drop and are therefore direct measurements of the energy loss across the air flow resistances. (Pa = 1 J/m3) • The influence of the choice of velocity on the pressure drop can be judged directly. • The difference in pressure drop between the first and the nth branch can be read directly. • The effect of a transition in 1, 2 or 3 size steps can be read directly. DUCTS Siz e Fläkt Woods 3374 GB 2017.05.10 Specifications are subject to alteration without notice VELODUCT® - Product Catalouge 65 Round ducting PRESSURE DROP CHARTS 30° 50 ∆pt30° = 0.33 * ∆pt 20 15 100 50 20 100 10 20 5 10 5 5 2 10 2 2 1 1 0,5 0,2 0,1 0,1 0,05 1 1,0 0,5 0,2 0,1 1 100 50 ∆pt45° = 0.5 * ∆pt 20 ∆pt30° = 0.33 * ∆pt 10 5 2 1 0,5 0,2 0,1 0,05 Fläkt Woods 3374 GB 2017.05.10 45° 200 90° 500 100 500 1000 50 100 15 20 10 5 1000 5000 10000 5000 50000 30 100 v, m /s 30° 10 q, l/s q, m3/h 50 100 10 20 5 10 2 2 1 0,5 0,2 1,0 1 ∆pt, Pa The pressure drop in the chart refer to 90 ° bend. For 45 ° -, respectively. 30 ° bend the following applies: 5000 10000 30 200 10 BDEB BEND, FABRICATED 500 1000 50 100 02 5 03 1 040 05 0 06 3 08 0 100 125 ∆pt45° = 0.5 * ∆pt 90° 5 1000 v, m /s 100 45° ∆pt, Pa The pressure drop in the chart refer to 90 ° bend. For 45 °-, respectively. 30 ° bend the following applies: q, m3/h 10 00 6 00 8 01 0 01 2 01 6 02 0 02 03 5 1 BDEB BEND, PRESSED 0,1 0,1 10 q, l/s 100 1000 10000 20000 Specifications are subject to alteration without notice 66 VELODUCT® - Product Catalouge Round ducting PRESSURE DROP CHARTS REDUCER, ALL TYPES 1 size step*) D1/D2 = 1.25 2 size step*) D1/D2 = 1.6 Area decrease Area increase Area increase Area increase 100 3 size step*) D1/D2 = 2.0 100 Area decrease Area decrease 100 50 20 20 20 10 10 10 5 5 ∆pt, Pa ∆pt, Pa 50 ∆pt, Pa 50 2 2 1 1 2 50 5 10 20 v, m/s air velocity v, m/s Incoming 1 1 5 2 2 50 5 10 20 v, m/s air velocity v, m/s Incoming 1 1 2 50 5 10 20 v, m/s air velocity v, m/s Incoming *) Example: Transition from 020 to 016 = 1 size step. 020 to 012 = 2 020 to 010 = 3 Fläkt Woods 3374 GB 2017.05.10 Specifications are subject to alteration without notice SE 3025 B FIG 6;1 VELODUCT® - Product Catalouge 50% 930526 AS 67 Round ducting PRESSURE DROP CHARTS BRANCHES, T-PIECES AND CROSSES The pressure drops included any reductions in cross section in accordance with the figures, provided that S < 3 · D. Fläkt Woods 3374 GB 2017.05.10 S D S D Specifications are subject to alteration without notice 68 VELODUCT® - Product Catalouge Round ducting INSTALLATION INSTRUCTIONS INSTALLATION OF ROUND TUBES AND FITTINGS (TO TIGHTNESS CLASS D) Fig. 1 THE TYPE APPROVAL T he Veloduct ducting system has been granted type approval by SITAC (the Swedish Institute for Technical Approval in Construction) in accordance with Type Approval Certificate 1718/88. The type approval signifies that a Veloduct ducting system, installed in accordance with this instruction, complies with the provisions of the Swedish Law (1994:847) on technical specification requirements for construction work, etc. In order for the type approval to be valid, it is required that all details be marked as shown in Fig. 1 or in a similar manner. Fläkt Woods 3374 GB 2017.05.10 Components without this seal of approval may only be employed to a limited extent and only if they are essential for connection to items of equipment or for special matching of the ducting to the building structure. The supervisor must check any components which do not bear the seal of approval with regard to the sealing employed and the installation.the sealing employed and the installation. Specifications are subject to alteration without notice VELODUCT® - Product Catalouge 69 Round ducting INSTALLATION INSTRUCTIONS INSTALLATION OF ROUND TUBES AND FITTINGS (TO TIGHTNESS CLASS D) PREPARATORY WORK PRIOR TO INSTALLATION WARNING! Ventilation ducts made of thin sheet metal sometimes have razor-sharp edges. 3.Cut the tubes at right angles to the measured lengths (make allowance for the fitting lengths of the components), and deburr the tube ends thoroughly, using a file or a deburring tool. WEAR PROTECTIVE GLOVES! Be especially careful with the following: – cut edges of spiral ducts – straight (non-folded) sheet metal edges of assembly parts. 1.Select a suitable section of ducting and check that the duct can be run in accordance with the drawing before collecting the necessary components from the storage area. Fig. 4 Fig. 2 2. Collect the necessary fittings and tubes. Check that they aren’t damaged in any way that would cause air leakage in the finished ducting system, such as holes left after rivets/screws have been removed from reused parts. If the storage area is well arranged and has good weather protection, the components will be easier to find, and the risk of damage or wastage will be reduced. A sign such as that shown in Fig. 3 will facilitate the delivery of materials. VELODUCT Fläkt Woods INSTALLATION 4.Assemble suitable sections on the floor. To facilitete the fitting of one part into another, turn one of them while pushing it in. U P P L AG S P L AT S Fig. 6 Fig. 3 Fig. 5 3374 GB 2017.05.10 Specifications are subject to alteration without notice 70 VELODUCT® - Product Catalouge Round ducting INSTALLATION INSTRUCTIONS INSTALLATION OF ROUND TUBES AND FITTINGS (TO TIGHTNESS CLASS D) SIZE 008–063 COMPONENTS a) Minimum overlap = to edge of bead a 7.Fit the hangers (e.g. XCEZ-111 Veloduct hanger straps). The distance L between hangers should not exceed 3.0 m for uninsulated ducts and 2.0 m for ducts with fire insulation. Fig. 7 SIZE 006, 035–125 COMPONENTS b)Minimum overlap = until the dimples centre to tube end b Fig. 10 8.Suspend the duct sections from the hangers. Fig. 8 5.Fit together the various components as shown in Fig. 7 and 8. 6.Lock the joints. All joints must be secured by means of self-tapping screws or pop rivets in the ducts. The purchaser decides which fasteners can be utilised for ease of cleaning. The number of self-tapping screws or pop rivets necessary is specified in the table above. Locate the screws at such a distance from the tube end that the rubber seal will not be damaged. Space the screws equally around the periphery, and arrange them in such a manner that the gap between the tube and the fitting will be as small as possible. The ductwork can be locked with the tubes and fittings resting on the floor, or this can be done after the ducting has been suspended. The latter procedure facilitates adjustment of the overall length and the positions of various fittings. Duct size Number of screws/pop rivits 006–016 2 020–031 3 040–063 4 080–125 8 Fig. 11 9.Insertion is facilitated if the entry end is located so that the seal will not be nipped. Fig. 12 10.Readjustment of Veloduct joints: If it becomes necessary to turn one or both duct components at their joint, and the rivets or screws securing it are removed, the rivet/screw holes left in the duct component will have to be sealed before the joint is relocked. Keep in mind that an open hole in the insertion end of the duct component will leak even though it is concealed by a tube or connection piece. Fig. 9 Fläkt Woods 3374 GB 2017.05.10 Specifications are subject to alteration without notice VELODUCT® - Product Catalouge 71 Round ducting INSTALLATION INSTRUCTIONS INSTALLATION OF ROUND TUBES AND FITTINGS (TO TIGHTNESS CLASS D) 11.Removal of fittings or tubes: Turn the component while withdrawing since the seal will otherwise fold and render dismantling difficult. If sealing compound cannot be applied to the outside of the branch (e.g. in the case of a mounting frame), apply additional sealing compound at the inner end of the branch (3). If the branch is accessible from the outside (item of equipment), spread out the compound which has been squeezed out (4). If necessary, apply additional compound until a uniform, sealing bead has been 1 2 Fig. 13 Fig. 14 a INSTALLATION OF PRODUCTS WITHOUT SEAL OF APPROVAL 12.Products without seal of approval incorporated into the ducting and fitted in accordance with the provisions of the seal of approval must be sealed so that they will definitely be in conformance with tightness class D. The seal at joints, etc. must be checked visually before fitting into the ducting. A test report must be produced for products with concealed joint seals. Components not provided with VELODUCT seals must be sealed in accordance with relevant parts of the example below. The sealing material should be non-ageing and permanently elastic. 33 Fig. 14 b 4 A) Mounting frames and branches for duct fittings and equipment branches (Fig. 14). Deburr the tube end (1). Apply an abundant coating of sealing agent to the end of the branch so that a bead of sealing agent will be formed (2). Push the branch into the tube. Secure the branch to the tube by means of self-tapping screws/blind rivets. Fläkt Woods 3374 GB 2017.05.10 Fig. 14 c Specifications are subject to alteration without notice 72 VELODUCT® - Product Catalouge Round ducting INSTALLATION INSTRUCTIONS INSTALLATION OF ROUND TUBES AND FITTINGS (TO TIGHTNESS CLASS D) B) Securing of products to the building structure (Fig. 15). Check that the joint surface (1) is smooth. Apply a sealing strip to the joint surface of the product (2). Secure the product to the building structure. Then seal the inside of the joint (3) or, if preferable, on the outside. Refinish with concrete or similar material, if necessary (4) 4 3 1 2 C) Sealing of rectangular joint against items of equipment (transition from a circular duct to an item of equipment with a rectangular connection) as shown in Fig. 16. If possible, the circular connection (1) of the transition piece should be made by means of a VELODUCT joint. The rectangular joint (2) should be of the factory-made type and should be fitted in accordance with the manufacturer’s instructions for tightness class C. A flanged joint (bolted joint) must be fitted with a nonageing sealing strip and external corners under the flange should be carefully sealed with sealing compound (3). 2 1 3 Fläkt Woods 3374 GB 2017.05.10 Specifications are subject to alteration without notice FWG-Veloduct® Round ducting-3374 GB-2017.05.10 © Copyright 2015 Fläkt Woods Group WE BRING ™ BETTER AIR TO LIFE With over a century of innovation and expertise to share with our customers, Fläkt Woods is a global leader in Air Technology products and solutions. We specialize in the design and manufacturing of a wide range of products and solutions for Air Movement, Air Treatment, Air Distribution, Air Management and Air Diffusion with focus on two major benefits – Air Comfort and Fire Safety. With market presence in 65 countries we are in a unique position to be a local supplier and an international partner in our customer’s projects. Our product brands such as SEMCO®, eQ®, eQ Prime®, JM Aerofoil®, Econet®, Veloduct®, Optivent®, Optimix®, Econovent® and Cleanvent® are well-known and trusted by customers all over the world to deliver high quality and energy efficient solutions. » To learn more about our offering and get in contact with your nearest sales representative please visit www.flaktwoods.com WWW.FLAKTWOODS.COM ROUND DUCTING 3374GB 2017.05.10
© Copyright 2025 Paperzz