Packing for Shipment
■ Packing form
The packaging used to deliver products consits of tubes, trays, tapes, inner boxes, and an outer
box. (See Figures 1 to 7.)
The tubes, trays, and tapes are designed to protect the products from damage. After unpacking
the products, however, handle them with care not to let ICs become loose or protrude to
prevent them from being damaged.
DB81-10008-2E
1
PACKAGE
Packing for Shipment
Fig. 1 Packing Form for Plastic SOP, SOL, SSOP, TSSOP, Tubes
Tube
For SOP
Label I *1
Aluminum Iaminated bag
Heat seal
Dry pack
Desiccant
Humidity indicater
Aluminum Iaminated bag
(tubes inside)
Inner box
[Label I]
Cushioning material
FUJITSU
IC / LSI
Label I
Inner box
*1
box
Cushioning material
Outer box
Outer box*2
Use adhesive tapes.
*1: For a product of witch part number is suffixed with "E1", a " G
moisture barrier bag and the inner boxes.
Pb
" marks is display to the
*2: The space in the outer box will be filled with empty inner boxes, or cushions, etc.
Note: The packing specifications may not be applied when the product is delivered via a distributer.
2
DB81-10008-2E
Fig. 2 Packing Form for Plastic SOP, SSOP, TSOP, QFP Trays
Cushioning material
Tray
Humidity indicater
Tray
Desiccant
Product
Binding band or tape
Filled tray + one empty tray
Heat seal
Dry pack
Label I *1
Aluminum laminated bag
[Label I]
Inner box
Inner box
FUJITSU
IC / LSI
Binding band
or tape
Label I *1
Inner box
Cushioning material
Outer box
Outer box *2, *3
Use adhesive tapes.
*1: For a product of witch part number is suffixed with "E1", a " G
Pb
" marks is display to the
moisture barrier bag and the inner boxes.
*2: The size of the outer box may be changed depending on the quantity of inner boxes.
*3: The space in the outer box will be filled with empty inner boxes, or cushions, etc.
Note: The packing specifications may not be applied when the product is delivered via a distributer.
DB81-10008-2E
3
PACKAGE
Packing for Shipment
Fig. 3 Packing Form for Ceramic QFP, LQFP Trays
Tray
Product
Tray
Binding band
or tape
Cushioning
material
Filled tray + one empty tray
Inner box
Inner box
FUJITSU
IC / LSI
Binding band
or tape
Label I
[Label I]
*1
Inner box
Cushioning material
Outer box
Outer box
*2, *3
Use adhesive tapes.
*1: For a product of witch part number is suffixed with "E1", a " G
moisture barrier bag and the inner boxes.
Pb
" marks is display to the
*2: The size of the outer box may be changed depending on the quantity of inner boxes.
*3: The space in the outer box will be filled with empty inner boxes, or cushions, etc.
Note: The packing specifications may not be applied when the product is delivered via a distributer.
4
DB81-10008-2E
Fig. 4 Packing Form for Plastic SOP, TSOP, BCC, QFP, LQFP, TQFP, BGA, T-BGA, FBGA,
SCSP, FLGA, JEDEC Size Trays
Product
Tray
Tray
Humidity
indicater
Desiccant
Dry pack
↓
Inner box
Binding band
or tape
Filled tray + one empty tray
Cushioning material
FUJITSU
Inner box
IC / LSI
Label I *1
Binding band
or tape
Heat seal
Label I *1
Aluminum laminated bag
[Label I]
Inner box
Cushioning material
Outer box
Outer box *2, *3
Use adhesive tapes.
*1: For a product of witch part number is suffixed with "E1", a " G
Pb
" marks is display to the
moisture barrier bag and the inner boxes.
*2: The size of the outer box may be changed depending on the quantity of inner boxes.
*3: The space in the outer box will be filled with empty inner boxes, or cushions, etc.
Note: The packing specifications may not be applied when the product is delivered via a distributer.
DB81-10008-2E
5
PACKAGE
Packing for Shipment
Fig. 5 Packing Form for Ceramic QFP, LQFP JEDEC Size Tray
Product
Tray
Binding band
or tape
Tray
Filled tray + one empty tray
FUJITSU
Inner box
IC / LSI
Antistatic
bag
↓
Inner box
Binding band
or tape
Label I *1
Cushioning material
[Label I]
Inner box
Cushioning material
Outer box
Outer box *2, *3
Use adhesive tapes.
*1: For a product of witch part number is suffixed with "E1", a " G
Pb
" marks is display to the
moisture barrier bag and the inner boxes.
*2: The size of the outer box may be changed depending on the quantity of inner boxes.
*3: The space in the outer box will be filled with empty inner boxes, or cushions, etc.
Note: The packing specifications may not be applied when the product is delivered via a distributer.
6
DB81-10008-2E
Fig. 6 Packing Form for Ceramic BGA Tray
Sponge tray
Tray
Base Tray
Product
Humidity indicater
Dry pack
↓
Inner box
Cover
Sponge cusion
Desiccant
Cushion material
Label I *1
Heat seal
Binding band
or tape
Aluminum
laminated bag
Binding band or tape
Inner box
Label I*1
[Label I]
Cushion material
Outer box *2, *3
Outer box
Packing tape
*1: For a product of witch part number is suffixed with "E1", a " G
Pb
" marks is display to the
moisture barrier bag and the inner boxes.
*2: The size of the outer box may be changed depending on the quantity of inner boxes.
*3: The space in the outer box will be filled with empty inner boxes, or cushions, etc.
Note: The packing specifications may not be applied when the product is delivered via a distributer.
DB81-10008-2E
7
PACKAGE
Packing for Shipment
Fig. 7 Packing form (Embossed tapes)
Outside diameter: φ 254mm reel
Outside diameter: φ 330mm reel
Label I *1
Label I *1
Embossed
tapes
Humidity indicator
Desiccant
Aluminum laminated bag
Dry pack
Label I *1
Heat seal
F
U
J
IT
S
U
Inner box
Inner box
F
U
J
IT
S
[Label I]
U
Label I *1
Taping
φ 254mm reel
φ 330mm reel
F
U
J
IT
S
U
F
Outer box
U
J
IT
S
U
F
U
J
IT
S
U
Outer box *2, *3
Outer box *2, *3
Use adhesive tapes.
*1: For a product of witch part number is suffixed with "E1", a " G
Pb
" marks is display to the
moisture barrier bag and the inner boxes.
*2: The size of the outer box may be changed depending on the quantity of inner boxes.
*3: The space in the outer box will be filled with empty inner boxes, or cushions, etc.
Note: The packing specifications may not be applied when the product is delivered via a distributer.
8
DB81-10008-2E
■ Index mark orientation of a package on the tray
Package
type
Tray size and index mark direction orientation
135.9
F
F
in
260
QFP
general
315
165
Index mark
Chamfered corner
Index mark
Chamfered corner
165
219 or 260
Index mark
Index mark
F
260
259 or 220
F
PGA
general
in
Chamfered corner
230.3
Index mark
125.3
F
135.9
F
F
in
260
SOP
general
315
165
Index mark direction
Chamfered corner
DB81-10008-2E
Chamfered corner
❍ = Positive bend index mark direction
● = Reverse bend 1st pin index
9
PACKAGE
Packing for Shipment
Package
type
Tray size and index mark direction orientation
135.9
260
315
165
F
F
TSOP I
Chamfered corner
❍ = Positive bend 1st pin index
● = Reverse bend 1st pin index
Chamfered corner
❍ = Positive bend 1st pin index
● = Reverse bend 1st pin index
135.9
260
315
165
F
F
TSOP II
Chamfered corner
❍ = Positive bend 1st pin index
● = Reverse bend 1st pin index
Chamfered corner
❍ = Positive bend 1st pin index
● = Reverse bend 1st pin index
135.9
Index mark direction
Chamfered corner
F
F
260
BGA
T-BGA
FBGA
BCC
FLGA
315
165
Index mark direction
Chamfered corner
10
DB81-10008-2E
■ Dimensions for Containers
● Dimensions for inner box
•TypeA
H
W
L
• Type B
H
W
L
• TypeC
H
W
L
• TypeD
H
W
L
• TypeE
H
W
L
DB81-10008-2E
11
PACKAGE
Packing for Shipment
(Dimensions in mm)
Dimensions for inner box
Inner
type
L
W
H
A
550
125
75
B
180
275
45
B
165
360
75
220 × 260
B
236
277
41
219 × 259
C
225
265
15
365
345
40
365
345
50
365
345
65
265
265
50
Packing Type
Tube
165 × 260
135.9 × 322.6
135.9 × 314.96
Tray
135.9 × 315
Dimensions
135.89 × 314.96
12.16
Emboss
Reel
φ330
Tape width
24.32
D
44
φ254
E
● Dimensions for outer box
H
W
L
(Dimensions in mm)
Dimensions for outer box
Packing Type
Tube
165 × 260
L
W
H
570
270
175
395
315
150
385
355
195
395
315
150
425
410
325
570
270
175
135.9 × 322.6
135.9 × 314.96
Tray
Dimensions
135.9 × 315
135.89 × 314.96
220 × 260
219 × 259
12.16
Emboss
Reel
φ330
24.32
44
φ254
12
Tape width
DB81-10008-2E
Packing handling precautions
1. Because outer boxes gradually weaken during storage as a result of moisture, stacking, etc.,
inventory should be handled on a first-in, first-out basis.
2. Although the IC packing materials (such as tubes) are designed to protect against
electrostatic damage, full precautions against electrostatic damage must be taken when
removing the products from their packing.
3. Handle the inner and outer boxes gently. Rough handling can dislodge the tubes stoppers,
allowing the products to fall out of the tubes and possibly bend their leads.
Rough handling of boxes containing ceramic packages in particular can cause chips, cracks,
or leak defects.
4. Because the inner and outer boxes are made of corrugated cardboard, do not allow them to
become wet. Do not store the boxes outside or in a hot and humid location under any
circumstances.
5. Do not throw, drop or otherwise roughly handle the outer boxes (corrugated cardboard
boxes) containing products under any circumstances.
6. QFPs are packed in trays, but it is very easy to accidentally bend their leads when removing
them from their original packing and placing them in other packing. Therefore, strictly
obsever the following items.
a) When cutting the binding
tape, hold the trays securely
in place with one hand.
Hand
Use adhesive
tapes
Cut
Tray
b) Hold the trays firmly in place while removing the tape so that the trays do not shift
position. (If the trays shift, the packed ICs may be dislodged and the leads may bend.)
c) Check after packing the packages
Before stacking the trays containing the IC packages, check the following points.
- Make sure that the packages are properly positioned on the ribs.
- If any packages are not positioned on the ribs, , check for bent leads and then
reposition the packages.
Note: When handling the packages, make sure to take electrostatic
countermeasures, such as wearing finger sleeves or a grounded wrist strap.
Use air tweezers, and avoid touching the leads if possible.
(Correct)
(If another tray is stacked on top of this one, the leads will be bent)
Ribs
Is the package on top of the ribs?
Is the package centered properly?
DB81-10005-1E
1
PACKAGE
Packing handling precautions
d) Check after stacking the trays
- Make sure that there are no abnormal gaps between the stacked trays.
- Handle the stacked trays carefully when using packing tape or packing bands to
secure the trays. (Secure the trays only after making sure that there are no gaps.)
Large gap
(Correct)
(Incorrect)
7. When removing stoppers from containers, be careful not to let the stopper jump out of the
container.
8. A container, coated with antistatic, may be sticky.
9. Heat resistant tray has a label entitled "HT" or " heat proof temperature" (e.g. 125 °C
MAX). The heat resistant tray allows 125 °C heat being applied for 24 hours. It may cause
warp on heating or cooling. To minimize the warp, it is be heated or cooled on a flat
surface. Avoid the abrupt cooling.
2
DB81-10005-1E