Screwdriver 90°. Right-angled drilling
and insertion of screws.
Flat head
Reliable
transmission of
force
Broad range of
applications
Screwdriver 90°. Right-angled drilling
and insertion of screws.
Flat head, minimum overall height
Sophisticated head design:
– Minimum overall height
– Optimized drive design
– Easy to clean
Given its low overall height, the 90°
screwdriver is ideal for intraoral
treatment of subcondylar fractures.
Minimum
overall height
Reliable transmission of force
– Drive is specifically designed for
transmitting the required torque
– Minimum mechanical wear and
longer instrument life from optimized
bearings of all moving parts
Broad range of applications
Minimally-invasive predrilling and insertion of screws in the mandible without
a transbuccal approach for a range of
indications.
Examples of use:
– Plate fixation of bilateral sagittal split
osteotomies (BSSO)
– Endoscopically-supported plate fixation of subcondylar fractures
Minimodule:
Easy to pick up and remove screwdriver
shafts and drill bits.
Screwholder
– Fast and easy exchange of
screwholder inserts for screws with
1.5/2.0 mm and 2.4 mm diameters
– The screwholder can be turned at an
angle behind the head
– Easier visibility
– Simple handling
– Minimum irritation of soft tissue
Predrilling with the 90° screwdriver
The 90° screwdriver is also suitable as
an attachment for right-angled
predrilling.
– Remove the screwholder insert or the
complete screwholder.
– Remove the turning handle.
– Connect the conventional drive unit
at the handle.
The 90° screwdriver is equipped with
an Intra coupling according to ISO
3964/EN 23 964. The gear ratio is 1:2.
Ö036.000.011öACHä
Screwdriver 90°. Right-angled drilling
and insertion of screws.
Ordering information
03.505.003
Shaft
Special length drill bits
03.505.004
Handle
03.505.065
Drill Bit ⭋ 1.5mm, w/Stop, L 21/14mm, 2-flute, for Screwdriver 90°
03.505.005
Turning Handle
03.505.066
Drill Bit ⭋ 1.5mm, w/Stop, L 23/16mm, 2-flute, for Screwdriver 90°
03.505.010
Screwholder, without Insert
03.505.067
Drill Bit ⭋ 1.5mm, w/Stop, L 25/18mm, 2-flute, for Screwdriver 90°
03.505.011
Screwholder Insert for Screws ⭋ 1.5 and 2.0 mm
03.505.085
Drill Bit ⭋ 1.8mm, w/Stop, L 21/14mm, 2-flute, for Screwdriver 90°
03.505.012
Screwholder Insert for Screws ⭋ 2.4 mm
03.505.086
Drill Bit ⭋ 1.8mm, w/Stop, L 23/16mm, 2-flute, for Screwdriver 90°
03.505.087
Drill Bit ⭋ 1.8mm, w/Stop, L 25/18mm, 2-flute, for Screwdriver 90°
03.505.100
Screwdriver Shaft 1.3, cruciform, self-holding
Drill Bit ⭋ 1.0 mm with Stop, length 15/8 mm, 2-flute
03.505.101
Screwdriver Shaft 1.5/2.0, cruciform, self-holding
03.505.024
Drill Bit ⭋ 1.0 mm with Stop, length 19/12 mm, 2-flute
03.505.103
Screwdriver Shaft 2.4, cruciform, self-holding
03.505.030
Drill Bit ⭋ 1.1 mm with Stop, length 11/4 mm, 2-flute
03.505.032
Drill Bit ⭋ 1.1 mm with Stop, length 15/8 mm, 2-flute
03.505.111
Screwdriver Shaft Stardrive 1.5, self-holding
03.505.034
Drill Bit ⭋ 1.1 mm with Stop, length 19/12 mm, 2-flute
03.505.112
Screwdriver Shaft Stardrive 2.0, self-holding
03.505.041
Drill Bit ⭋ 1.5 mm with Stop, length 13/6 mm, 2-flute
03.505.044
Drill Bit ⭋ 1.5 mm with Stop, length 15/8 mm, 2-flute
03.505.120
Screwdriver Shaft PlusDrive 1.3, self-holding
03.505.047
Drill Bit ⭋ 1.5 mm with Stop, length 19/12 mm, 2-flute
03.505.121
Screwdriver Shaft PlusDrive 1.5/2.0, self-holding
03.505.051
Drill Bit ⭋ 1.8 mm with Stop, length 13/6 mm, 2-flute
03.505.054
Drill Bit ⭋ 1.8 mm with Stop, length 15/8 mm, 2-flute
03.503.081
Screwdriver Shaft MatrixMANDIBLE, self-holding
03.505.057
Drill Bit ⭋ 1.8 mm with Stop, length 19/12 mm, 2-flute
03.503.083
Screwdriver Shaft MatrixMIDFACE, self-holding
68.505.002
Instrument Tray
68.505.009
Lid for Instrument Tray
03.505.026
Drill Bit ⭋ 1.25 mm with Stop, length 17/10 mm, 2-flute,
for Screwdriver 90°
68.505.042
Mini Module for Instrument Mini Trays
03.505.027
Drill Bit ⭋ 1.25 mm with Stop, length 19/12 mm, 2-flute,
for Screwdriver 90°
68.505.043
Lid for 68.505.042
03.505.035
Drill Bit ⭋ 1.1 mm with Stop, length 11/4 mm, 2-flute,
for Screwdriver 90°
68.505.010
Mini Module 1.5 for Instrument Tray
Drill Bit ⭋ 1.1 mm with Stop, length 15/6 mm, 2-flute,
for Screwdriver 90°
68.505.020
Mini Module 2.0 for Instrument Tray
68.505.030
Mini Module 2.4 for Instrument Tray
Drill Bit ⭋ 1.1 mm with Stop, length 19/8 mm, 2-flute,
for Screwdriver 90°
68.505.040
Mini Module for Instrument Tray MatrixMANDIBLE
68.505.050
Mini Module for Instrument Tray MatrixMIDFACE
05.505.003
Instrument for Removal of Inserts
05.001.098
Synthes Maintenance Spray, 400 ml*
05.505.002
Spray Adapter
MatrixMANDIBLE drill bits
03.505.075
Drill Bit ⭋ 1.5 mm with Stop, length 13/6 mm, 2-flute,
for Screwdriver 90°
03.505.076
Drill Bit ⭋ 1.5 mm with Stop, length 15/8 mm, 2-flute,
for Screwdriver 90°
03.505.078
Drill Bit ⭋ 1.5 mm with Stop, length 19/12 mm, 2-flute,
for Screwdriver 90°
03.505.081
Drill Bit ⭋ 1.8 mm with Stop, length 13/6 mm, 2-flute,
for Screwdriver 90°
03.505.082
Drill Bit ⭋ 1.8 mm with Stop, length 15/8 mm, 2-flute,
for Screwdriver 90°
03.505.084
Drill Bit ⭋ 1.8 mm with Stop, length 19/12 mm, 2-flute,
for Screwdriver 90°
03.505.091
Drill Bit ⭋ 2.4 mm with Stop, length 13/6 mm, 2-flute,
for Screwdriver 90°
03.505.092
Drill Bit ⭋ 2.4 mm with Stop, length 15/8 mm, 2-flute,
for Screwdriver 90°
03.505.094
Drill Bit ⭋ 2.4 mm with Stop, length 19/12 mm, 2-flute,
for Screwdriver 90°
Synthes GmbH
Eimattstrasse 3
CH-4436 Oberdorf
www.synthes.com
*Comments: Regular servicing with the maintenance spray (Art. No. 05.001.098)
will ensure proper mechanical functioning.
61090006
03.505.037
SE_034455 AC
03.505.036
All technique guides are available as PDF files at
www.synthes.com/lit
0123
036.000.011
MatrixMIDFACE drill bits
All rights reserved
Drill Bit ⭋ 1.0 mm with Stop, length 11/4 mm, 2-flute
03.505.022
© 05/2009 Synthes, Inc. or its affiliates
03.505.020
Synthes and Stardrive are trademarks of Synthes, Inc. or its affiliates
Drill bits