p r o d u c t d ata s h e e t
TWINDRIVE ® TD1
220 and TD1 250
Features:
• Low built-in height
• Low noise level
• Mains voltage:
- 230 V AC 50/60 Hz
- 120 V AC 50/60 Hz
- 100 V AC 50/60 Hz
• Angle footrest: 45° ±3° and 55° ±3°
• Angle headrest: 68° ±3°, 45°±3° and 55° ±3°
• Average speed: 3.4° / sec. with max. torque
• Installation dimension: 796 mm length x 90 mm
height x 90 mm width. Installation dimension
on the shaft 581 ±1 mm
• Torque max.: 220/250/280 Nm
• Colour: Grey plastic on motor housing RAL 7035,
closing device grey RAL
7016, or all parts in black
RAL 9005
Options:
• External mains cut-off (EU version only) 0.1 W standby power consumption
• Emergency lowering (2 x 9 V batteries)
• Built-in receiver for RF handsets
• Extra channel for LA27 linear actuator (e.g. for
neck adjustment) (only in combination with RF)
Usage:
• Compatible with HB10 and HB20 handsets
• Duty cycle: 10 % ~ 6 min. per hour max. 2 min.
continuous use followed by 18 min. not in use
• TD1 220/TD1 250 typical standby power consumption without mains cut-off: 2 W
• TD1 with toroidal transformer typical standby
power consumption without mains cut-off:
0.6 W
• Typical standby power consumption with mains
cut-off: 0.1 W
• Storage and transport temperature:
-10 °C to +70 °C
• Ambient temperature: +5 °C to +40 °C
• Approved according to EN 60335-1, including RF
• EMC according to EN55014 -1 / EN55014 - 2
The TD1 220 and TD1 250 are the basic TWINDRIVE versions in the Comfort Furniture segment. They were primarily developed for use in
slatted beds, where the need for force is moderate.
The compact TD1 220 and the TD1 250 are characterised by the very low built-in height ensuring
almost invisible motors and space for storage or
easy cleaning under the bed. Furthermore, the
TD1 has a very low and comfortable noise level
making the use of the bed pleasurable.
The TD1 220 and the TD1 250 offer basic options
such as emergency lowering, mains cut-off and
different angles. For extra user comfort, wireless
handsets based on RF (radio frequency) technology or an extra channel for extra adjustment of
the bed is optional. Furthermore, it is possible to
add more force to the bed by choosing a toroidal transformer.
Dimension (mm):
795
90
63
27
581
90
179
65
Ø25.5
Extra channel for LA27 actuator
Technical specifications:
Type
Spindle pitch
Torque max.
Speed at max. torque
Duty cycle
(mm)
(Nm)
(Degrees / sec)
(%)
TD1 220
2.5
220
2.6° / sec.
10
TD1 250
2.5
250
2.4° / sec.
10
TD1 280
(toroidal transformer)
2.5
280
3.4° / sec.
10
The above measurements are made in connection with an internal control box and are average values.
Compability with standard handsets:
Analogue version:
HB10
HB20
Analogue “00”
TD1 220
Yes
Yes
TD1 250
Yes
Yes
TD1 280
(toroidal transformer)
Yes
Yes
HB10 RF
HB20 RF
HB10
HB20
Yes
Yes
Yes*
Yes*
RF version:
TD1 220
TD1 250
Yes
Yes
Yes*
Yes*
TD1 280
(toroidal transformer)
Yes
Yes
Yes
Yes
* It is possible to use a handset with cable with a TD1 RF system with integrated RF receiver (but only to control internal
motors).
Speed diagram:
TWINDRIVE
1 - Average
Speed Speed
TD1
220 and TD1
250 – Average
5,00
Speed [°/sec]
4,00
3,00
TD1-220 &
TD1-250
2,00
1,00
0,00
18
72
126
180
234
220Nm -3500N
288
250Nm -4000N
Torque [Nm]
TD1 280 - Average Speed
5
TD1-280
Speed [°/sec]
4
3
2
1
0
18
71,955
72
125,91
126
179,865
180
233,82
234
Torque [Nm]
Torque diagram:
287,775
288
288 Nm ~ 4500 N
TD1 220
250TWINDRIVE
– Torque on220/250Nm
Test Rig
Torque
onand
testTD1
rig for
300
250
TD1-250
TD1-220
Torque [Nm]
200
150
100
50
0
0
10
20
30
40
50
60
70
60
70
Degrees above horisontal [°]
Torque on test rig for TWINDRIVE 280 Nm
TD1 280 – Torque on Test Rig
300
TD1-280
250
Torque [Nm]
200
150
100
50
0
0
10
20
30
40
Degrees above horizontal [°]
50
TWINDRIVE® TD1 220/250:
Ordering example:
Cables:
0 = Straight 3.2 m EU plug
3 = Straight 3.2 m UK plug
4 = Straight 3.2 m Japan plug
5 = Straight 3.2 m US plug
7 = Straight 3.2 m AUS plug
9 = Used together with mains cut-off
IP Degree:
0 = None
Mains cut-off:
0 = None
1 = Mains cut-off with EU wall plug, black,
(non detachable cable 3.2 m)
Mains voltage:
0 = 230 V
1 = 120 V
2 = 100 V
Option:
0 = None
R = Built-in RF receiver
Colour:
A = Standard grey RAL 7035
B = Black
Battery back-up:
1 = Emergency lowering via 9 V battery
incl. batteries
2 = Emergency lowering via 9 V battery
Excl. batteries
No. of external channels:
0 = None standard
1 = 1 extra channel (only in combination with RF)
Angle footrest:
0 = Standard 45°
2 = 55°
Angle headrest:
0 = Standard 68°
2 = 55°
4 = 45°
Torque:
0 = 280 Nm (toroidal transformer)**
1 = 220 Nm (el-core transformer)
3 = 250 Nm (el-core transformer)
Number of motors:
0 = Standard
1 = Only one motor for headrest
Type:
TD1
** = only in combination with RF
Terms of use
The user is responsible for determining the suitability of LINAK products for specific application.
LINAK takes great care in providing accurate and up-to-date information on its products.
However, due to continuous development in order to improve its products, LINAK products are
subject to frequent modifications and changes without prior notice. Therefore, LINAK cannot
guarantee the correct and actual status of said information on its products.
While LINAK uses its best efforts to fulfil orders, LINAK cannot, for the same reasons as
mentioned above, guarantee the availability of any particular product. Therefore, LINAK reserves
the right to discontinue the sale of any product displayed on its website or listed in its catalogues
or other written material drawn up by LINAK.
All sales are subject to the Standard Terms of Sale and Delivery for LINAK. For a copy hereof,
please contact LINAK.
F o r m o u n t in g in s t r u c t i o n s a n d g u i d a n c e in u s a g e , p l e a s e s e e t h e r e l e v a n t U s e r ’ s M a n u a l s
Copyright © LINAK 2012.04. MA M9-02-237-D . Chapter 16.1.1
TD1 0 1 0 0 0 0 A 0 0 0 0 0