S600 - S1200
Performance and flexibility!
Our high tech options allow you to design your own custom-made machine. The S600 - S1200 range comes
with an auxiliary engines, in hydrostatic version or, on
request, with clutch-independent drive on the frames.
Because service is important to us, our customers and
their machines receive first-class after-sales service.
A custom-made machine for every challenge
The superior class with 6 to 12m³ offers you individual solutions for your specific requirements. For cleaning of roads, sweeping of gravel or
absorption of milled material, extraction of weeds, elimination of oil traces or vacuuming of surfaces with various high pressure systems (optional with rotary cleaner), you will find here the ideal equioment for all your tasks. Performance, technical refinement and cost-effectiveness are convincing qualitiesassets of these machines. The well thought through and well conceived construction decreases the maintenance costs.
Double benefits
Not only you can enjoy excellent driver comfort and user-friendly operation, with the S600 - S1200 you also have the possibility of sweeping
both sides. Optionally our machines are available with double disk brooms.
Hopper
Garbage intake system
Drive and handling
A wide variety of options offer the perfect
solutions for any requirement. Auxiliary engines, drive-independent power take-off,
hydrostatic drive, mechanical or hydraulic
blower drive, a vast choice to satisfy any
Depending on the chassis, 6 to 12 m³ hoppers are available. An integrated water
tank with capacities from 1,200 to 5,000
liters assures an optimal center of gravity.
The bottom, side walls and central partition of the hoppers are made entirely of
chrome-alloyed stainless steel. On request
– and for particular tasks – the volume of
the water tank can be enlarged; optional
additional tanks in various sizes are available.
The garbage intake system consists of a
650 mm wide suction mouth and an Ø 700
mm broom (optionally with double disk
broom). The garbage is carried towards
the suction mouth by the channel brush
and the 1,500 mm wide cylinder broom (Ø
400 mm). For the intake of bulky garbage
the suction mouth is pneumatically
tiltable, optionally a separate, pneumatically opening flap is available. The suction
mouth comes with an inner abrasion protective coating.
-2-
needs.
The large turbine wheel is made of wear-resistant materials and is particularly environmently-friendly and very quiet. High durability makes this drive very economical. Alternatively, machines can be provided
with a hydrostatic drive, which allows
smooth and stepless driving from 0 to 35
kph.
The water valves are ball-valves managed
from the cabin. Therefore the fresh water
jets on teh brushes can be operated independently. A clear and functional water level indicator is integrated into the control
unit, which provides safe and easy handling. On request, a mini control panel can
be integrated into the driver’s door.
2017/06/17
With a swap-body for all-year use
Allows a high utilization rate for the chassis, especially in winter. With a few simple adjustments the sweeping unit can be exchanged with a
spreader.
Options for S600-S1200
High-pressure cleaning unit
Washing units
Surface vacuuming
Available with a spray gun and a hoseroller. On request the unit can be mounted
on the feeder broom or below the front
bumper.
Available with pressures ranging from 15
to 300 bars and performance from 15 to
250 liters/minute. There are many options
and the installation of the washing bar is
performed according to customer requirements.
Performed below the rear overhang, covering the complete vehicle width, in combination with various high-pressure units,
available with rotation- or flat-jet power
nozzles, or with rotational cleaners in front
of the suction mouth.
-3-
2017/06/17
Suction hose boom
Double disc broom
Weed broom
Available from Ø 220 mm, the hose can be
Perfect for difficult jobs, e.g. milled mate-
For effective cleaning of strongly affected
mounted behind the tank, or optionally,
centered on the roof of the tank, swiveling
at 270°. Lifting and lowering and rpm regulation (vacuuming performance) are easily
rial. The double disc broom assures precise
waste collection towards the suction
mouth and offers high cleaning speeds.
zones, e.g. channels and borders. It can be
fitted either to the left or to the right in
front of the front wheel. An optional, pivoting version is also available.
Additional water tank
Hydrostatic drive
Oil trace cleaning
Depending on configuration, water tanks
from 1,200 to 5,000 liters are available in
the series. For long-lasting high-pressure
performances additional tanks from 500 to
4,000 liters are available – depending on
the frame and requirements.
For difficult conditions, a hydrostatic drive
is available. The accelerator pedal becomes the driving pedal and you can drive
step-less between 0 and 35 km/h. Optionally, a hand-lever version is also available.
The oil trace cleaning unit is mounted in
front of the vehicle with position adjustment. Achieving fast cleaning at up to 7 km/h - e.g. cleaning up after accidents.
executed using the manual ring.
-4-
2017/06/17
Сопутствующие товары
Sweeper S40
Eco-Friendly Mounted
Sweeper
Marcel Boschung AG
Boschung Mecatronic AG
Tel. +41 26 497 85 85
Fax +41 26 497 85 90
Aéropôle 108
CH-1530 Payerne
Schweiz / Suisse / Switzerland
Tel. +41 26 460 44 11
Fax +41 26 460 44 88
Aéropôle 108
CH-1530 Payerne
Schweiz / Suisse / Switzerland
BOSCHUNG Newsletter