Parquet Tiles Technical Specifications
DESCRIPTION
Natural Cork Parquet Tiles
SIZES
12" x 12" , 24” x 12”, 24” x 24”. Thickness: 5/16”( 8mm).
COMPOSITION
1/8” high density Cork wear layer/ 1/8” MDF / 5/64” high density Cork underlayment
DENSITY
Cork 550 kg/m
THERMAL INSULATION
ISO 8301
0.06W/m°k
FLAMMABILITY:
ASTM E 648 = Class 2 Prefinished - Class 1 Unfinished
SMOKE DENSITY
Specific Optical Density ASTM E 662 (NFPA 258)
Flaming: -148
Non Flaming: -272
COMPRESSION
RECOVERY
ISO 9727
2
With loading of 38.5 lbs/in
Initial: 10%
Residual: 1.5% after 1 hour
2
Breaking tension on traction: no less than 11 lbs/in
THERMAL RESISTANCE
ASTM C 518
Thermal conductivity(k):
Thermal Resistance(r):
Thermal Resistance per inch:
3
3
(34 lbs/ft )
ELECTROSTATIC PROPENSITY Test Mode/Step
Test Mode/Scuff
COEFFICIENT OF FRICTION
ASTM C 1028
- 0.3490
- 0.49
- 2.87
Negative polarity
Negative polarity
Dry test conditions - 0.76 average
DIMENSIONAL TOLERANCE Length & Width: +/- 0.3mm
0.6 kV
1.7 kV
Wet test conditions - 0.74 average
Thickness: +/- 0.2mm
SQUARING
No greater than 0.2mm
FINISH
Sanded unfinished or factory finished with 3 coats anti scratch water base Lacquer
ABRASION
RESISTANCE
ASTM D 3884
Abrasion wheels H-18 with 1000 grams load
400 wear cycles
WATER VAPOR
TRANSMISSION
Water vapor transmission:
Permeance:
2
-0.128 grains/h ft
-0.183 perms ASTM E 96
Natural CORK, Inc.
1710 North Leg Court
Augusta, GA 30909
1-800-404-CORK (2675)
fax: (706) 733-8120
www.naturalcork.com
09/05
Cork Floating Floor Technical Specifications
DESCRIPTION
Tongue and groove floating floor for commercial and residential
applications.
SIZE & COMPOSITION
35"13/16 × 11"13/16 × 1/2”
Cork top layer:
3. mm (1/8")
Middle layer:
6 mm (1/8") HDF (High Density Fiberboard)
Bottom layer:
3 mm (5/64") cork underlayment
DENSITY FIBERBOARD
850 Kg/m3 (52,87 lb/ft3) Moisture resistant. Jointshield Protection
DENSITY CORK
Wear Layer 34 lbs/ft³ - Underlayment 13 lbs/ft³
PATTERNS
Classic Series and Earth Series
ACOUSTICAL RATINGS:
Concrete Slab 8”
With drop ceiling
FLAMMABILITY
Hardwood, Plywood, Veneer Association,
Average critical radiant flux 0.60 w/cm2 (unfinished)
COMPRESSION
RECOVERY
ISO 9727
With loading of 38.5 lbs/in2
Initial: 10%
Residual: 1.5% after 1 hour
Breaking tension on traction: no less than 11 lbs/in2
FINISH
5 coats UV-cured acrylic finish
SHOCK ABSORPTION
UNE 56 817 74
Initial maximum indentation < 0.19 mm
Maximum indentation after 1 hour
< 0.08 mm
ABRASION
RESISTANCE
ASTM D 3884
Abrasion wheels H-18 with 1000 grams load
400 wear cycles
FORMALDEHYDE
Class E1, Danish Control Organization for wood based Panels
(HDF)
To classify E1, high density fiberboard panels must contain less
than 9 mg per 100 g of product.
PACKAGING
6 planks per pack or 17.60 sq. ft.
60 packs per pallet or 1056 sq. ft.
STC 58
STC 60
IIC 68
IIC 73
weight: 29 pounds
weight: 1716 pounds
NC 30
NC 30
Parquet Tiles Technical Specifications
DESCRIPTION
Natural Cork Parquet Tiles
SIZES
12" x 12" Thickness: 3/16”(4.8mm). Other sizes available by special order
DENSITY
Cork 550 kg/m
THERMAL INSULATION
ISO 8301
0.06W/m°k
FLAMMABILITY:
ASTM E 648 = Class 2 Prefinished - Class 1 Unfinished
SMOKE DENSITY
Specific Optical Density ASTM E 662 (NFPA 258)
Flaming: -148
Non Flaming: -272
COMPRESSION
RECOVERY
ISO 9727
2
With loading of 38.5 lbs/in
Initial: 10%
Residual: 1.5% after 1 hour
2
Breaking tension on traction: no less than 11 lbs/in
THERMAL RESISTANCE
ASTM C 518
Thermal conductivity(k):
Thermal Resistance(r):
Thermal Resistance per inch:
3
3
(34 lbs/ft )
ELECTROSTATIC PROPENSITY Test Mode/Step
Test Mode/Scuff
COEFFICIENT OF FRICTION
ASTM C 1028
- 0.3490
- 0.49
- 2.87
Negative polarity
Negative polarity
Dry test conditions - 0.76 average
DIMENSIONAL TOLERANCE Length & Width: +/- 0.3mm
0.6 kV
1.7 kV
Wet test conditions - 0.74 average
Thickness: +/- 0.2mm
SQUARING
No greater than 0.2mm
FINISH
Sanded unfinished or factory finished with 3 coats anti scratch water base Lacquer
ABRASION
RESISTANCE
ASTM D 3884
Abrasion wheels H-18 with 1000 grams load
400 wear cycles
WATER VAPOR
TRANSMISSION
Water vapor transmission:
Permeance:
2
-0.128 grains/h ft
-0.183 perms ASTM E 96
Natural CORK, Inc.
1710 North Leg Court
Augusta, GA 30909
1-800-404-CORK (2675)
fax: (706) 733-8120
www.naturalcork.com
Wall Tile Technical Specifications
Natural CORK Decorative Wall Tile
Description
Natural cork wall tile for commercial or residential applications
Size
12” x 24” x 1/8”
Patterns
Granito, Cleopatra, Rivers, Brisa, Dalila, Renoir
Density
370 kg/m3 or 23 lbs/ft3
Finish
Hot melt Wax film applied as a protective
Dimensional Tolerance
0.2 mm
Flammability
ASTM E84
Flame Spread: 25
Smoke density: 250
Passes class 1 for commercial installations
Origin:
Made in Spain
NATURAL CORK
1710 North Leg Court
Augusta GA 30909
800-404-2675 706-733-8120 fax
www.naturalcork.com