A Huber Company
Huberbrite® 10LC
BARIUM SULFATE
DESCRIPTION
A high purity, fine ground barium sulfate (barite) processed at Huber's
Quincy, IL plant. Carefully controlled particle distribution of the high
brightness source allows the material to be used as a high density
extender in adhesives, caulks, sealants, rubber, and plastics with
excellent X-Ray opacity and low moisture content.
Cumberland Center II
3100 Cumberland Blvd
Suite 600
Atlanta, GA 30339
phone: (678) 247-7300
fax: (678) 247-2797
e-mail: [email protected]
www.hubermaterials.com
TYPICAL PHYSICAL PROPERTIES
Median Particle Size (Sedigraph®, µ)
Brightness (Hunter reflectance, L)
Oil Absorption (lbs oil / 100lbs, ASTM D281)
Moisture (%, ASTM D280)
Loose Bulk Density (lb/ft3, ASTM C110)
Compacted Bulk Density (lb/ft3, ASTM C110)
Hegman Grind (ASTM D1210)
HB10LC
9
> 92.0
8.5
0.2
100
130
3
PARTICLE SIZE (SCREEN) ANALYSIS
Mesh size
+325 (45µm)
%
0.01
TYPICAL CHEMICAL ANALYSIS
Barium sulfate
Calcium carbonate
Silica and Silicates
Other
%
94.0
1.3
4.2
0.5
MINERAL PROPERTIES
Color
Specific Gravity (ASTM D153)
Weight per Gallon (s.g. x 8.345)
Quincy, Illinois
White
4.39
36.3 lbs/solid gallon
THERE ARE NO IMPLIED WARRANTIES OF MERHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Refer to Huber’s Standard Conditions of Sale for the only express
warranties applicable to the Huber products. Products incorporating Huber products are not warranted by Huber. In no event is Huber liable for consequential damages. Hubercarb®
is a registered trademark of J.M. Huber Corporation for calcium carbonate.
©2016 J.M Huber Corporation
Revised May 2016