SPM010 solar panel, 12 volt, 10 watt.
The panel fastens to the frame of the panel using 6mm-1 machine screws passed down through
the panel with a fender washer on the outside and a nut on the inside. Tighten, using thread lock
compound or a little Goop if vibration is a concern. The brace is fastened to the bracket with a
1/4"-20 screw with nut and lock washer. The bracket and brace can be held onto a pole using
stainless steel hose clamps of appropriate size. Or it can be affixed to a wood pole or to the roof of
a weather shelter using screws. The assembly can alternatively be mounted on the roof of a
weather shelter.
wire nuts (for connecting solar panel to CG1129
battery charger).
1/4"-20 machine screw
6mm-1 machine screw (2)
fender washer (2)
nut
lock washer
nut (2)
cable clamp