Waxing - Step by Step
Elegantly designed to incorporate all the features required by today’s modern therapist and beauty salon, the heater
has six heating chambers for the direct insertion of 75/80g roller depilatory cartridges. A clear protective lid maintains
the working temperature, whilst maximising salon hygiene.
There are 3 waxes available for the Roller Depilatory system, Warm wax, Tea Tree Crème wax and Perfect Pink Crème wax.
Perfect Pink Crème wax has been specifically formulated for sensitive skin. Using only the best quality ingredients so we
can claim greatly reduced skin reaction. At present we have two sizes of roller head, small or large.
1 Insert a cartridge (with roller head attached) into each heating compartment,
close the lid, turn the dial to heat up and leave until the indicator light goes out,
switch the dial to constant for approx. 10mins, this allows the wax to reach the
correct working temperature. The system is now ready to use.
* The six heating compartments must always contain a cartridge.
2 Cleanse the area to be treated using Hive Pre Wax Treatment Spray,
removing all make-up, body lotions, moisturisers or surface grease.
Dry thoroughly.
3 Remove chosen cartridge from the heater and turn upside down, allowing
the wax to flow into the roller head. Cover the cartridge with a Disposable
Protective Sleeve (the cartridges can become very hot to touch).
DO NOT SQUEEZE.
4 Holding the cartridge at approx. 45°degree angle, apply the wax with the
direction of hair growth. Roll the cartridge quite quickly over the skin,
ensuring an even and thin application. Cover as much of the entire area to be
treated a possible, (preventing overlapping and encouraging speed).
* Insert the cartridge into the heating compartment to maintain the temperature.
Close the lid.
5 Using a fabric/paper strip remove the wax, (when treating the legs always
begin at the ankle) until the area is clear.
6 When treating the back of the legs use the cartridge in the same manner,
remembering to follow the direction of the hair growth, and remove.
WAX I N G
Waxing - Step by Step
8 Enhance the completion of the treatment with the application of
Hive Cool Down After Wax Treatment. This unique cream formula has
been developed to reduce redness caused by the treatment.
The natural soothing and disinfecting ingredients of Camphor, Menthol
and Clove Oil leave the skin feeling comfortable, cool and refreshed.
*When used after Hive Wax Control it will absorb any residual oils.
9 Use the small roller head when performing an eyebrow wax.
As with spatula applied waxing, cover the remaining brow with
petroleum jelly for protection. Holding the cartridge at a 45°degree
angle, gently roll the wheel over the hairs to be removed.
Apply a fabric/paper strip, support and remove.
* Insert cartridges back into heating compartment, close the lid.
10 The small roller head has also been designed
to perform the ideal lip wax treatment.
11 When treating the underarm area, therapist preference will
determine the size roller head required. Underarm hair growth can
occur in many pattern variations and the size of the head used can
vary from client to client.
12 Upon completion of the treatment the therapist can choose
either to clean the roller heads or dispose of them. To clean simply
soak a fabric strip in wax equipment cleaner and wipe across
the roller head or alternatively place the heads in a bowl of wax
equipment cleaner and leave to soak.
WAX I N G
WAXING BY HIVE
7 Apply Hive Wax Control, which with the natural calming and
soothing effects of Azulene and a unique blend of oils enriched with
vitamins, helps soothe the irritated skin. The oil base gently dissolves
any remaining wax from the treatment area.