S12/1
S12/1
SUSPENSION/STEERING/BRAKES/REAR AXLE
ENERGY SUSPENSION- BODY MOUNTS ................................................................. S12/1
IDIDIT- TILT STEERING COLUMNS ......................................................................... S12/1
FRONT SUSPENSION- ENERGY suspension bushes ................................................. S12/3
HEIDTS-FRONT SUSPENSION aftermarket style ...................................................... S12/5
STEERING-HEIDTS ....................................................................................................... S12/8
BRAKES-HEIDTS performance..................................................................................... S12/8
REAR SUSPENSION original type .................................................................................. S12/
HEIDTS-REAR SUSPENSION [4-LINK] aftermarket style ....................................... S12/9
AIR-RIDE- REAR SUSPENSION aftermarket style .................................................... S12/9
AIR-RIDE- CONTROL- COMPRESSOR & TANK kits ........................................... S12/10
AIR-RIDE FRONT SUSPENSION aftermarket style................................................. S12/10
SHOCKABSORBERS-STREET front and rear ............................................................. S12/
REAR AXLE & PARTS.................................................................................................. S12/11
Body Mounts
Energy Suspension Polyurethane performance components, are made in the USA. Energy
use a material called “Hyper-Flex”, which is the result of 20+ years of experience. Careful
selection of material firmness [durometer] is used for each specific application on the vehi
cles suspension & frame. Hyper-Flex components do not rot or deteriorate from exposure
to oils & under-car chemicals or atmospheric conditions, like smog & ozone. Handling &
steering response is vastly improved over standard, soft bushes. Ride could be stiffer.
Chevrolet full Size
Chevrolet Camaro
Polyurethane body mount set-Black
Polyurethane body [subframe] mount set-Black
BY3-4106G
BY3-4120G
BY3-4138G
BY3-4142G
1955-57 Not 2dr hardtop .................... £65.74
1955-57 2dr hardtop ........................... £65.74
1965-70 2dr hardtop ........................... £61.37
Chevrolet Corvette
1967-2002 all models Black ............... £66.33
Chevrolet Chevelle, Malibu, Monte-Carlo, Laguna, El-Camino
Polyurethane body mount set-Black
Polyurethane body mount set-Black
BY3-4153G
BY3-4102G
BY3-4128G
BY3-4111G
BY3-4115G
BY3-4134G
BY3-4113G
1963-64 Seat belt mounts ................... £27.29
1963-67 Hardtop only ......................... £28.75
[part above is pictured]
BY3-4152G
BY3-4126G
1963-67 Convertible only ................... £49.61
1973-82 All models ............................ £55.84
1964 Not convertible .......................... £85.92
1965-67 Not convertible ..................... £85.92
1968-72 Not convertible ..................... £64.44
1970-72 Monte-Carlo not convert ...... £69.44
1968-72 El-Camino only .................... £64.44
Pontiac Firebird & Trans Am
Polyurethane body [subframe] mount set-Black
BY3-4142G
BY3-4157G
1967-75 check below .......................... £65.33
1973-75 +1” hole in core support ....... £53.95
[part above is pictured]
BY3-4144G
Steering Columns
Tilt Steering Column Paintable Steel-Universal
Does NOT have column shift
Made by iditit-
BYAJW265 28” length, 2” tube OD .......... £330.10
BYAJW255 30” length, 2” tube OD .......... £330.10
BYAJW245 32” length, 2” tube OD .......... £330.10
Tilt Steering Column Chrome-Universal
Does NOT have column shift
Made by iditit-
BYAJW270 28” length, 2” tube OD .......... £433.57
BYAJW260 30” length, 2” tube OD .......... £412.90
BYAJW250 32” length, 2” tube OD .......... £398.33
Tilt Steering Column Paintable Steel-Universal
HAS column shift
Made by iditit-
BYAJW605 30” length, 2.25” tube OD ..... £459.72
BYAJW585 33” length, 2.25” tube OD ..... £459.72
1976-81 .............................................. £70.86
The IDIDIT steering column is world renowned, and since 1986 has been fitted to many
thousands of Hot-Rods, all over the world. IDIDIT is a family business, based in the state
of Michigan, and their steering columns are made in the USA, to very high standards. Vari
ous finishes are available, although we only carry in stock- chrome & paintable-steel. Other
finishes, like- black powder coated, brushed & polished aluminium, are available to order.
These columns are available in plain, 8 position tilt and with or without column shift.
Measuring your car, to see which column would be best, is critical. Please ask for measur
ing instructions and we will gladly send them to you . More time spent doing this, will
ensure a perfect fit later on. Most columns feature a flashing indicator control, a 4-way
hazaard light control & horn. Other options including cruise control are available.
Tilt Steering Column Chrome-Universal
HAS column shift
Made by iditit-
BYAJW610 30” length, 2.25” tube OD ..... £665.27
BYAJW615 33” length, 2.25” tube OD ..... £600.46
Real Steel Tel: 01895 440505
e-mail: [email protected]
Iss31
S12/2
S12/2
- SUSPENSION/STEERING/BRAKES/REAR AXLE Steering
Tilt Steering Column Paintable Steel-Universal
This column HAS column shift
Made by iditit-
BYAJW215 33” length, 2-1/4” tube OD .... £507.04
Tilt Steering Column Paintable Steel-1953-56 Ford 1/2 ton
Does NOT have column shift Complete with horn relay & adapter
plug to connect your Ford wiring to the Ididit wiring. If you retain
the original steering box, you will need to chop off the inner shaft
and re shape to take a u-joint. 30” long. 2” tube.
Tilt Steering Column Paintable Steel-1953-56 Ford 1/2 ton
This column HAS column shift Complete with horn relay &
adapter plug to connect your Ford wiring to the Ididit wiring. If
you retain the original steering box, you will need to chop off the
inner shaft and re shape to take a u-joint. 30” long. 2-1/4” tube.
Made by iditit-
Made by iditit-
BYAJW145
1953-56 Ford 1/2 ton Pickup ............ £351.83
BYAJW150 1953-56 Ford 1/2 ton Pickup . £522.56
Tilt Steering Column -1955-56 Chevy
Does NOT have column shift If you retain the original manual
steering box, you will need to chop off the inner shaft and re
shape to take a coupler. An installation kit may be required.
Made by iditit-
BYAJW220 Paintable steel ......................... £330.10
BYAJW225 Chrome ................................... £433.57
Tilt Steering Column Paintable Steel-1955-56 Chevy
This column HAS column shift If you retain the original manual
steering box, you will need to chop off the inner shaft and re
shape to take a coupler. An installation kit may be required. Has
provision to use original dash indicator. Only works with 3 & 4
speed, not Powerglide.
Tilt Steering Column- Chrome- Ford Mustang
These columns are for floor shift only. Designed for your classic
Mustang. Save and use your original under dash mount. A new
floor mount comes with the column. Complete with a Ford turn
signal switch, and a Ford type wiring plug. Designed to accept
your original Mustang steering wheel, and place it in the original
position. You could use an alternative steering wheel with an adaptor. The lower shaft is 3/4” x 36. For the 1965-66 and some 67
models you will need a coupler BYAJW195. You will also need
to cut off your old shaft, which goes into the steering box, &
modify it to 3/4” DD. Later 67 and 68 use kit BYAJW880. The
1969 model uses a “Rag Joint” BYAJW885.
Made by iditit-
BYAJW185 1955-56 Chevy ....................... £568.09
Made by iditit-
BYAJW860
BYAJW865
BYAJW870
BYAJW875
1965-66 Mustang ................... £548.54
1967 Mustang ......................... £548.54
1968 Mustang- collapsible ..... £602.62
1969 Mustang- collapsible ..... £602.62
Tilt Steering Column Paintable Steel -1967-69 Camaro
Does NOT have column shift. For the 1967-68 models, a wiring
harness adaptor is included. A 1969 Camaro steering wheel, bolts
directly to the IDIDIT column. It is recommended you fit a new
“rag joint” connection.
Made by iditit-
BYAJW045 1967-68 Camaro/Firebird ....... £351.83
BYAJW050 1969 Camaro only-w/ignition £516.35
Steering Column Accessories/Installation Parts
Pivoting Drop Brackets-Polished Aluminium
Often required to hold the steering column in place, at the right
angle, where the original part will not work.
BYAJW070 2” tube, 2-1/2” drop ................. £76.37
BYAJW075 2” tube, 3-1/2” drop ................. £77.59
BYAJW080 2-1/4” tube, 2-1/2” drop ........... £76.37
BYAJW085 2-1/4” tube, 3-1/2” drop ........... £77.94
BYAJW515 2-1/4” tube, 5” drop 1932 Ford £75.83
BYAJW520 2” tube, 5” drop 1932 Ford ...... £75.83
BYAJW830 Upper mount bracket ................ £10.92
Use this metal bracket on a 47-54 Chevy P.U.
Floor Mounts for Column
In some cases, the original bottom column mount, will not work
with your new column.
BYAJW170 2” tube budget floor mount ...... £27.11
BYAJW115 2-1/4” tube budget floor mount £26.57
BYAJW190 2” tube budget Tr-Chevy .......... £16.81
BYAJW175 2” swivel ball floor mount ...... £111.32
BYAJW500 2-1/4” swivel ball floor mount £102.28
Above numbers [BYAJW175/500] are for a chrome stg column
BYAJW510 2” swivel ball floor mount ...... £100.10
BYAJW505 2-1/4” swivel ball floor mount £100.10
Budget Floor Mount With Trim Kit
Cruise Control Kit
This lower bracket comes with a polished aluminium trim ring &
hardware. To complete the installation, a boot is also available.
Includes the parts needed to fit cruise control on a non computerised engines. Servo & control unit are small enough to fit under
any dash. Includes pulse generator & control handle. Add this
worthy item to your column.
BYAJW105 Floor mount trim kit 2” tube .... £44.98
BYAJW110 Black boot for above kit ........... £20.24
BYAJW160 Cruise control kit .................... £336.58
BYAJW165 Cover-cruise handle-alum pol .. £30.36
Real Steel Tel: 01895 440505
e-mail: [email protected]
S12/3
S12/3
- SUSPENSION/STEERING/BRAKES/REAR AXLE Steering/Front Suspension
Steering Wheel Adaptors
In most cases, a steering wheel adaptor will be required to enable
you to attach your steering wheel.
BYAJW035 3 bolt polished ...................................... £72.30
BYAJW040 3 bolt chrome ..................................... £107.95
BYAJW030 9 bolt polished- short .......................... £118.62
BYAJW060 9 bolt polished + horn .......................... £70.82
BYAJW055 9 bolt chrome + horn .......................... £108.44
[part above is pictured]
Lever with Dipswitch [High Beam]
Control your high beam, from your flashing indicator lever.
BYAJW065 Dipswitch lever ....................... £132.06
Cable Shift for Column Change
INSTALLATION KITS
This kit enables you to connect up your new column to your automatic trans. Consists of- cable, transmission bracket and cable
bracket for column.
There are many installation kits for the 55-56-57 Chevy. Here are the ones
that we keep.
BYAJW090 GM Trans 69 on, IDID 2” ...... £123.70
BYAJW095 GM Trans 69 on, IDID 2-1/4” £113.64
BYAJW625 C4 Linkage clamp assy 2-1/4” . £48.35
BYAJW630 C4 Trans bracket/cable kit ....... £66.53
BYAJW640 C6 Trans bracket/cable kit ....... £68.53
Original harness, coupler, floor mount, 4-way kit, OE manual box
[above part is pictured]
BYAJW240 55 Chevy floor shift .............. £122.40
BYAJW230 55 Chevy floor shift .............. £194.68
Original harness, rag joint, floor mount, 4-way kit, OE power box
BYAJW180 56 Chevy floor shift .............. £122.40
Original harness, coupler, floor mount, 4-way kit, OE manual box
BYAJW235 56 Chevy floor shift .............. £194.68
BYAJW620 Half moon shift lever ................ £29.09
The half moon shift lever will help you avoid the brake pedal.
The lever is complete with bushing & hardware to mount to your
IDIDIT steering column.
Original harness, coupler, floor mount, 4-way kit, OE power box
Listed below, are the installation parts for the IDIDIT column, [version
that uses the OE steering wheel] for the 1965-69 Ford Mustang.
BYAJW195 Coupler 3/4 x 36 // 3/4 DD ..... £55.60
Indicator for Transmission
Enables you to see which gear you are in. Mounts on top of column.
BYAJW120
BYAJW125
BYAJW130
BYAJW135
Acrylic indicator +pointer 3spd .......... £24.29
Acrylic indicator +pointer 4spd .......... £24.18
Also includes chrome housing 3spd .... £67.46
Also includes chrome housing 4spd .... £67.78
1965-early 67. On these vehicles, the steering staft comes out of the steering
box and up into the column [one piece]. To fit a different column, this shaft
will need to be cut, & then modified to take the coupler.
BYAJW880 Kit later 67 and 68 ................ £178.31
Consists of a coupler, short piece of connecting shaft, & a rag joint.
BYAJW885 Rag joint for 69 ..................... £119.90
This is a flexible coupling to join the column to the OE stg box.
Coupling Parts for Steering Rack/Box
GM Horn kit 1955-68
There are many types of coupling to join your column to your steering rack/
box. Here are some of them.
BYAJW750 UJ steel 3/4” DD to 26 x 9/16” £82.84
Above joint is for Heidts manual stg rack
BYAJW555 UJ steel 1”DD to 3/4” smooth .. £72.13
BYAJW645 UJ steel 1”DD to 3/4”DD ......... £90.02
BYAJW565 Pol S/S u-jnt 1”DDx3/4”DD .. £137.06
BYAJW595 U-joint steel 3/4DD to 3/4DD £106.03
BYAJW600 UJ steel 3/4DD to Mustang “V” £85.80
Above joint is for Heidts power stg rack
BYAJW535 Pol S/S u-jnt 3/4”DDxMust”V”£192.85
The above joint has a built in vibration reducer, designed to stop
pulses from the power steering pump reaching the column.
BYAJW195 Coupler- 3/4”-36 x 3/4” DD .... £55.60
BYAJW200 Coupler- 1 DD x 3/4” DD ........ £55.60
BYAJW675 Steel shaft 3/4” DD - 16” ......... £21.96
BYAJW680 Steel shaft 3/4” DD - 32” ......... £29.64
BYAJW530 Polished S/S shaft 3/4”DD 22” £69.00
BYAJW210 Rag joint-3/4”-36 x 3/4” x 30 £130.26
BYAJW205 Rag joint- 1-DD x 3/4” x 30 .. £130.26
This kit adapts most GM stock steering wheels to an IDIDIT steering column. The kit consists of- aluminium trim ring, horn contact plate, spring, pin & retainer.
BYAJW100 Horn contact kit GM ................ £27.06
Female End plug for Column
This plug mates up to the plug on the IDIDIT steering column. Enables you
to wire up your column and use a proper plug.
BYAJW140
Female plug ........................................ £17.75
Steering Wheels- Billet Specialties
These steering wheels use a 9 bolt adaptor. They have milled finger notches
for an ultra comfortable grip. Many types available.
BY29425 Indy- 14” ..................................... £225.82
BY30137 Split Spoke- 14” ......................... £225.82
Shown at right
BY29008 Black leather 14” half wrap .......... £45.13
Leather half wrap is required for both wheels
Front Suspension
Chevrolet/Pontiac Full Size
Chevrolet Camaro/Pontiac Firebird & Trans am
Polyurethane front end control arm bushing set
BY3-3108G
BY3-3150G
1955-64 Chevrolet .............................. £59.64
1965-70 Chevrolet .............................. £40.44
Lowers- reuse metal parts
BY3-3103G
1971-73 Chevrolet + Bonneville ......... £60.05
Only models with 1-5/8” OD front lower bushes.
Polyurethane front end control arm bushing set
BY3-3101G
BY3-3102G
BY3-3104G
BY3-3103G
1967-69 .............................................. £60.85
1970-72 .............................................. £70.25
1973-74 1-3/8” OD lowers ................. £60.84
1973-74 1-5/8” OD lowers ................. £60.05
Above part also fits 1973 Firebird
BY3-3105G
1975-79 .............................................. £63.36
Above part also fits 1974-79 Firebird
BY3-3106G
BY3-3157G
BY3-3164G
Real Steel Tel: 01895 440505
e-mail: [email protected]
1980-81 .............................................. £67.68
1982-92 Lowers only .......................... £37.26
1993-02 [Lowers re-use metal parts] .. £61.78
S12/4
S12/4
- SUSPENSION/STEERING/BRAKES/REAR AXLE Front Suspension
Chevrolet Corvette
Chevrolet & Pontiac
Polyurethane front end control arm bushing set
Polyurethane front end control arm bushing set These bushes will give added
performance without creating any adverse changes to the original ride.
BY3-3108G
BY3-3142G
BY3-3117G
1964-66 .............................................. £60.84
Chevelle, Malibu, Monte-Carlo, Laguna, El-Camino, LeMans, GTO, Tempest. On 1966 Chevrolet models, there are two size rear lower bushes, these
are 1.9” OD.
1963-82 .............................................. £59.64
1984-96 .............................................. £68.02
BY3-3101G
1966-74- Bushes are round ............... £60.85
Chevelle, Malibu, Monte-Carlo, Laguna, El-Camino, LeMans, GTO, Tempest. On 1966 Chevrolet models, there are two size rear lower bushes, these
are 1.65” OD. Nova & Chevy 2- 1968-74.
Chrysler- RWD
BY3-3172G
Polyurethane front end control arm bushing set
1967-72 Oval rear lower bushes ........ £60.85
Above number fits- Chevelle, Malibu, Monte-Carlo, Laguna, El-Camino,
LeMans, GTO, Tempest.
BY3-3160G
BY5-3132G
1962-67 .............................................. £51.13
Above number fits- Nova, Chevy 2- 1962-67.
1962-76 A body uppers only .............. £40.44
This number also fits “B-Body” 1965-72 uppers only & “E-Body” 70-74
Ford Motor Company
Chrysler notes“A” body- Dart, Demon, Duster, Valiant (Barracuda to 69)
“B” body- Charger, Coronet, Satellite, GTX, Roadrunner, Superbee
“E” body- (Barracuda 70 and up) & Challenger
Polyurethane front end control arm bushing set. Must re-use existing outer
metal shells.
BY4-3101G
1960-66 .............................................. £10.96
Falcon, Ranchero, Mercury Comet 1961-65, Mustang-lowers only
BY4-3131G
BY4-3102G
1962-65 Fairlane ................................. £16.44
1967-71 1-7/16” OD lower ................... £9.78
Fairlane, Grand Torino, Torino, Ranchero, Mercury Comet 1966-77, Mustang 67-73 1-7/16” OD lower
BY4-3106G
1967-71 1-9/16” OD lower ................... £9.05
Fairlane, Grand Torino, Torino, Ranchero, Mercury Comet 1961-65, Mustang 1967-73 1-9/16” OD lower
BY4-3130G
BY4-3132G
1974-78 Mustang ................................ £47.72
1979-82 Mustang excl HD susp’ ........ £39.36
Above also fits Mustang 1983-93
BY4-3108G
BY4-3144G
1979-82 Mustang with HD susp’ ........ £23.08
1994-04 Mustang ................................ £55.91
Front Strut Rod Bushes
Ford Motor Company
Chevrolet
Polyurethane front strut rod bushes
BY4-7111G
Polyurethane strut rod bushes
BY3-7109G
1960-66 .............................................. £20.40
BY4-7112G
1965-70 .............................................. £22.04
Above number fits- Belair, Biscayne, Caprice, Impala, Station Wagon
Above number fits- Falcon, Ranchero, Fairlane 62-65, Mustang 64-66,
Mercury Comet 1961-65
BY3-7105G
1962-67 .............................................. £18.08
Above number fits- Nova & Chevy 2
1967-71 .............................................. £20.98
Above number fits- Fairlane, Grand Torino, Torino, Ranchero, Mustang
1967-73, Mercury Comet 1966-77, Cougar 1967-73
BY4-7117G
Chrysler- RWD
1972-79 .............................................. £20.56
Above number fits- Fairlane, Grand Torino, Torino, Ranchero, Galaxie 196578, Thunderbird 1972-79, Cougar 1974-79
Polyurethane front strut rod bush set
BY4-7113G
BY5-7105G
1974-78 .............................................. £18.91
Above number fits- Mustang 1974-78
1962-65 .............................................. £11.51
Above number fits- “A” body 62-65
BY5-7109G
1966-76 .............................................. £21.29
Above number fits- “A” body 66-76, “B” body 65-74, “E” body 70-74.
Front End Links- Anti-roll Bar
Lengths- relate to straight shaft between bush platform washers
Front Anti-Roll Bar Links
Front Ant-Roll Bar Links
Polyurethane bushed front end links for anti-roll bar
BY9-8117G
2-5/8” .................................................. £17.29
Above number fits- 1955-57 & 1971-90- Belair, Biscayne, Caprice, El Camino
(thru 63), Impala, Station Wagon; Camaro/Firebird & Trans Am 1967-92;
+73-77 Chevelle, Monte Carlo, Malibu & El Camino 64 up; Monza & Vega
1971-80; Nova & Chevy 2- 1962-79; Mustang 67-73; Cougar 67-73; Pontiac
LeMans, GTO, Tempest 73-77; Bonneville, Catalina (Grand Prix to 81 only),
Safari Wagon 71-81;
BY9-8118G
2-7/8” .................................................. £17.65
Above number fits- Camaro/Firebird & Trans Am 1993-02; +1964-72Chevelle, Monte Carlo, Malibu & El Camino 64 up; Chrysler “B” body 6569; Chrysler “A” body 65-72; Fairlane, Grand Torino, Torino, (Ranchero
after 15-3-72) 72-79; Galaxie 72-78; Thunderbird 72-79; Cougar 74-79;
Pontiac Le Mans, GTO, Tempest 64-72;
BY9-8119G
1958-64; 3-3/8” .................................. £17.65
Above number fits- Belair, Biscayne, Caprice, El Camino (thru 63), Impala,
Station Wagon.
Polyurethane bushed front end links for anti-roll bar
BY9-8120G
1-5/8” .................................................. £18.28
Above number fits- 1965-70- Belair, Biscayne, Caprice, El Camino (thru
63), Impala, Station Wagon, Corvette 63-82; Chrysler “E” body 70-74;
Chrysler “B” body 70-72; Chrysler “A” body 1973-76; Fairlane, Grand Torino,
Torino, Ranchero 67-71; Mustang 64-66; Comet 66-77;
BY9-8121G
4-1/2” .................................................. £16.94
Above number fits- Mustang 79-93;
BY9-8124G
3-9/16” ................................................ £16.94
Above number fits- Mustang 94-04;
BY3-8102G
1984-87; ............................................. £11.74
Above number fits Corvette
BY3-8103G
1988-96; ............................................. £11.74
Above number fits Corvette
Real Steel Tel: 01895 440505
e-mail: [email protected]
S12/5
S12/5
- SUSPENSION/STEERING/BRAKES/REAR AXLE Front Suspension
Anti-Roll Bar Bushes
Chevrolet Camaro-Nova & Chevy 2
Anti-Roll Bar Bush Sets-with Brackets
Polyurethane front anti-roll bar bushes
Polyurethane Anti-Roll Bar Bush sets. Brackets are 4-1/2” long, by 1-3/8”
wide, 1-3/4” high, 3/4” from centreline of hole for bar, to mounting face of
bracket. Mounting bolts centre to centre can be between 3-5/8” and 2- 9/16”
[holes are slots].
BY9-5106G 3/4”- 19mm .............................. £16.78
BY9-5108G 7/8”- 22mm .............................. £16.78
BY9-5109G 15/16”- 24mm .......................... £17.12
BY9-5110G 1”- 25mm .................................. £17.74
BY9-5112G 1-1/8” - 28.5mm ....................... £17.74
BY9-5113G 1-1/4” - 31.5mm ....................... £17.74
BY9-5114G 1-5/16” - 33mm ........................ £17.12
BY3-5202G
BY3-5203G
11/16” Bar .......................................... £18.04
13/16” Bar .......................................... £18.04
Above numbers fit- Camaro 67-69; Nova & Chevy 2 68-74
set
set
set
set
set
set
set
HEIDTS FRONT SUSPENSION
Heidts were one of the first companies to make alternative crossmember based suspension assemblies, based on the 1974-78 Mustang II front suspension. Up until a few years ago, the Mustang II could
be readily found in scrapyards, and it was a simple matter to “remove” the front suspension, and modify it to suit ones Hotrod. Nowadays, these cars are getting a bit thin on the ground. This is where
Heidts comes in [23 years in business], manufacturing cross members to fit many classic cars & trucks. If you have the suspension parts from a Mustang II, then these will fit the crossmember. Otherwise,
you can buy all new components, with many different options. The Heidts front suspension design, follows faithfully, the design used by Ford Motor Company. This is because it is technically a very good
design. Ford got it right first time with this design, eliminating bumpsteer, and including built-in anti-dive into the design. Some of the other Mustang II based designs do not have these features. Hotrods
& Custom/Street cars built these days, need to be safe, as more & more families have become involved, giving us a much greater responsibility. The car needs to handle and brake in safety, from speed.
It is no good anymore having a car that will do 200mph in a straight line, but has poor brakes & suspension. Tailgating the family in a 2004 Mondeo on the M1 at 80mph, in your 1500bhp twin turbo ‘34
Ford coupe, is not a good idea, unless you have brakes the equal of his. The Heidts front suspension cross-member is made in the USA, not China, and it is beautifully made, a work of art. I visited the
Heidts factory, just north of Chicago, and was very impressed with the high quality of their work. I look forward to fitting one of these kits to my own car in the future.
FRONT SUSPENSION CROSSMEMBERS
FRONT SUSPENSION CROSSMEMBERS
BYPX-101-E Ford 1933-34 Car ............................. £401.21
BYPX-105-E Ford 1953-56 F-100 Pickup .............. £383.63
Upper fender adapter brackets included. radiator tabs included.
Must use-manual steering rack & narrowed suspension arms
Weld on engine mount brackets are available-Ford V8 BYAJW335
and Chevy V8 BYAJW450
Steering rack extensions required
Weld on engine mount brackets are available-Ford V8 BYAJW335
and Chevy V8 BYAJW450
BYPX-102-E Ford 1935-40 Car & ‘35-41 Pickup .. £383.63
BYCX-101-E Chevy 1934-35 Standard Car ........... £401.21
Boxing plates included.
Narrowed suspension arms recommended.
Weld on engine mount brackets are availFord V8 BYAJW335 & Chevy BYAJW450
Radiator mount included, must use manual steering rack
Weld on engine mount brackets are available-Ford V8 BYAJW335
and Chevy V8 BYAJW450
BYPX-103-E Ford 1941-48 Car ............................. £383.63
BYCX-111-E Chevy 1934-36 Master Car ............... £401.21
Weld on engine mount brackets are available-Ford V8 BYAJW335
and Chevy V8 BYAJW450
Radiator mount included, must use manual steering
Weld on engine mount brackets are available-Ford V8 BYAJW335
and Chevy V8 BYAJW450
BYPX-104-E Ford 1948-52 F-1 Pickup .................. £401.21
BYCX-102-E Chevy 1937-39 Car ........................... £383.63
Steering rack extensions required
Weld on engine mount brackets are available-Ford V8 BYAJW335
and Chevy V8 BYAJW450
Weld on engine mount brackets are available-Ford V8 BYAJW335
and Chevy V8 BYAJW450
Real Steel Tel: 01895 440505
e-mail: [email protected]
S12/6
S12/6
- SUSPENSION/STEERING/BRAKES/REAR AXLE Front Suspension
FRONT SUSPENSION CROSSMEMBERS
FRONT SUSPENSION CROSSMEMBERS
BYCX-103-E Chevy 1940-48 Car ........................... £383.63
BYCX-308-E Chevy 1955-59 Pickup ..................... £403.07
Weld on engine mount brackets are available-Ford V8 BYAJW335
and Chevy V8 BYAJW450
“C” notched plates included. Steering rack extensions required.
Weld on engine mount brackets are available-Ford V8 BYAJW335
and Chevy V8 BYAJW450
BYCX-104-E Chevy 1949-54 Car ........................... £383.63
BYKX-101-E Universal 56-1/2” track width .......... £416.88
56-1/2” track width crossmembers fit 24-30” frame rails.[outside to outside]. The
crossmember & spring towers are made oversize to allow trimming & fitting to your
chassis. Templates & instructions, designed for a home builder to install.
Weld on engine mount brackets are available-Ford V8 BYAJW335
and Chevy V8 BYAJW450
Weld on engine mount brackets are available-Ford V8 BYAJW335
and Chevy V8 BYAJW450
BYCX-305-E Chevy 1937-39 Pickup ..................... £383.63
BYPX-320-E Mustang 1964-70+ 67-70 Cougar .... £453.58
“C” notched plates included
Weld on engine mount brackets are available-Ford V8 BYAJW335
and Chevy V8 BYAJW450
Includes boxing plates that weld in place. 2” dropped spindles
recommended for std ride height. Use a manual steering rack &
rear sump. 351C will not fit. Weld on engine mount brackets are
available-Ford V8 BYAJW335 & Chevy V8 BYAJW450
BYCX-306-E Chevy 1940-46 Pickup ..................... £383.63
BYPX-330-E Ford Falcon 1960-65 ......................... £401.21
U
N
IV
ER
SA
L
Details as
above-
“C” notched plates included
Weld on engine mount brackets are available-Ford V8 BYAJW335
and Chevy V8 BYAJW450
BYCX-307-E Chevy 1947-54 Pickup ..................... £394.90
NOTE: Some 54’s were sold in ‘55 be sure of your model!
“C” notched plates included
Weld on engine mount brackets are available-Ford V8 BYAJW335
and Chevy V8 BYAJW450
WHAT ELSE DO I NEED?
SUSPENSION ARM KIT, BRAKE SYSTEM KIT, STEERING RACK KIT, SPRING & SHOCKABSORBER KIT,
SPINDLE/FRONT UPRIGHT KIT, BRAKE HOSE KIT, STEERING COLUMN CONNECTION PARTS [see S12/3],
ANTI-ROLL BAR [option]
-all kits are pairs & include required hardware, everything is unpaintedTUBULAR SUSPENSION ARM KITS [unpainted]
choose one!
BYAJW545
BYAJW560
Std arm kit ........................................ £534.26
Coil-over shock arm kit .................... £447.04
Coil over shocks are more expensive
BYAJW580
BYAJW635
BYAJW550
Narrowed std arm kit [some Fords] .. £497.98
Narrowed coil-over shock arm kit ..... £469.42
Air-bag arm kit ................................. £540.44
The above kit requires the Air-Bag installation pack BYAJW810
BRAKE SYSTEM KITS [unpainted]
choose one!
BYAJW655
BYAJW685
Chevy bolt cicle = 5 on 4-3/4”, Ford bolt circle = 5 on 4-1/2”
BYAJW690
BYAJW695
Manual rack & pinion kit LHD ........ £187.06
Use universal joint BYAJW750 with above rack
BYAJW820
Manual rack & pinion kit RHD ........ £415.02
Use universal joint BYAJW with above rack
BYAJW715
Power rack & pinion kit LHD ........... £323.17
Use universal joint BYAJW600 with above rack
SPINDLE [FRONT UPRIGHT] KITS
choose one!
BYAJW700
BYAJW705
Std height “Mustang II” .................... £204.90
2” drop “Mustang II” forged ............. £191.94
On a Mustang, the 2” drop spindles are needed for “std” ride height
SPRING & SHOCKABSORBER KITS
choose one!
BYAJW720
BYAJW725
300lb springs & std shocks ............... £135.19
350lb springs & std shocks ............... £145.14
Black springs fit between upper & lower arms with std shock through centre.
No ride height adjustment, apart from correct pressure spring. 300lb is generally for Small Block engine. 350lb for aluminium headed Big Block.
BYAJW825
Spring spacers-3/4” ............................. £21.96pr
If your vehicle is riding a bit low in the front, these spacers will lift the
Heidts springs up around 3/4”.
BYAJW730
BYAJW735
500lb springs & coil-over shocks ...... £432.47
500lb springs & adj coil-over shocks £574.40
Springs mount on an adjustable platform on shockabsorber. This gives ride
height adjustment. 500lb is generally for Small Block. BYAJW730, is a
chrome shock with a chrome spring. BYAJW735 is a 10 position adjustable
rebound damping billet aluminium shock with a chrome spring. A spanner to
adjust the spring height is available under BYAJW405.
BRAKE HOSE KITS
choose one!
BYAJW590
11” kit Chevy-Willwood blk callipers £545.77
11” kit Ford- Willwood blk callipers . £544.68
Callipers are lighter [aluminium]. They are the 4 piston version
STEERING RACK KITS- choose one!
BYAJW710
11” brake kit Chevy bolt circle ......... £377.84
11” brake kit Ford bolt circle ............ £298.70
AIR BAG INSTALLATION PACK
Picture shows more parts than in kit
For std Heidts brake kits ..................... £52.16
Use with BYAJW655/685
BYAJW740
For Heidts brake kits w/Willwood 14” £35.36
Use with BYAJW690/695
BYAJW810
BYAJW745
Use with BYAJW550 to finish air-bag type front end
For Willwood callipers 16” hose ......... £45.47
Real Steel Tel: 01895 440505
e-mail: [email protected]
Heidts Air-Bag kit for BYAJW550 .. £343.46
S12/7
S12/7
- SUSPENSION/STEERING/BRAKES/REAR AXLE Front Suspension
Pro-G Camaro Front Subframe Kit 1967-69
Pro-G Camaro Front Subframe Kit 1967-69
Bolt on the best suspension possible for your Camaro/Firebird and Nova. HEIDTS now offer their
true bolt on Pro Touring full front subframe. Featuring their new Pro-G suspension package for
unbelievable cornering & overall handling. Simply unbolt and remove your front sheetmetal, engine & trans, your old subframe, then slide in the new complete HEIDTS subframe. Reinstall your
modified engine, the front end sheetmetal, and you are ready to “tear up the streets”, or maybe put
up a good account of yourself, on a Track-Day at Brands or similar. With this subframe fitted, the
rear suspension “done”, and proper wheels & tyres, your Camaro will handle like a 600bhp GoKart!.
This kit consists of- The Pro-G subframe, race car designed suspension, with adjustable [upper arm
only] plain, tubular, suspension arms. 11” Wilwood disc brakes with plain discs & black calipers.
Forged, 2” drop front spindles, power rack & pinion steering, aluminium coil over shocks with
adjustable spring platforms & 10 position rebound adjustable damping, chrome front springs [SBC]
450lbs & reversible multi-position transmission crossmember.
BYAJW355
Camaro f/s/frame kit 67-69 ......... £4237.25
Chassis Stiffener Mustang 1964-70
This is another item that gives the unibody design added stiffness
for performance use. Use with Heidts subframe connectors.
BYAJW345 Chassis stiffener 64-70 ........... £211.13
Mustang 1964-70 Inner Wing Panels
Use when fitting the Heidts front subframe kit. Remove the old
panels, and replace with these.
BYAJW315
BYAJW320
Forged Front Spindles 2” Drop
These front spindles are forged & are made from 1045 heat treated alloy
steel. With the “stub-axle” repositioned to give a 2” drop, your suspension
angles remain as standard. Includes calliper brackets.
BYAJW410
2” drop spindles Chevy 55-6-7 ......... £313.58
Inner wing panel 64-66 Mustang ........ £66.17
Inner wing panel 67-70 Mustang ........ £64.78
Forged Front Spindles 2” Drop
These front spindles are forged & are made from 1045 heat treated alloy
steel. With the “stub-axle” repositioned to give a 2” drop, your suspension
angles remain as standard.
BYAJW390
1” Dropped Coil Springs Chevy 55-6-7
2” drop spindles Camaro 67-69 ........ £303.10
AirRide Air-Spring Conversion Kit
To give your shoebox an even lower look, add these Heidt 1” dropped coil
springs. Combined with the 2” dropped spindles, they will put your cruiser a
full 3” in the weeds safely & easily.
If you already have a Mustang II based front suspension, this kit will enable
you to fit the AirRide type of air springs. Of course you will need many other
parts as well, including a compressor kit.
BYAJW430
BYAJW465
1” lower spring Chevy 55-6-7 ........... £108.13
AirRide conv’ kit [Must II] ............... £115.69
HEIDTS FRONT ANTI ROLL BARS
These anti-roll bar kits come complete with all parts required to fit. Assists in
keeping your car/truck sitting flat through the corners. If marked with * then
only works with Heidts Must II, or Pro-G front end kit.
BYAJW435
BYAJW660*
BYAJW665*
BYAJW310*
BYAJW370*
1955-57 Chevy 1” diam+urethane .... £217.38
1948-54 Ford Pickup +53-56 F100 .. £166.36
1947-54 Chevy Pickup ..................... £157.37
1964-70 Mustang+1967-70 Cougar . £197.38
1967-81 Pro-G Camaro 1-1/4” ......... £273.00
Above kit also works with 68-72 Nova
Real Steel Tel: 01895 440505
e-mail: [email protected]
S12/8
S12/8
- SUSPENSION/STEERING/BRAKES/REAR AXLE Steering
STEERING
Hook-up Kit Heidt Power Steering Valve
Heidt Adjustable Power Steering Valve
Kit of parts to help you install the Heidt adjustable power steering valve.
Tune your power steering, with the Heidt patented adjustable power steering
valve. It allows you to set or tune the “feel” of your power steering, with just
the turn of a knob. Turning the knob anticlockwise reduces the pressure to
the rack, which would tighten up the “feel” of the steering.
BYAJW460
BYAJW455
Hookup kit Heidts pwr stg valve ......... £62.64
Adjustable power steering valve ......... £88.93
Extension Kits 4”-Steering Rack
These extensions are required on some Heidt front crossmember kits.
BYAJW470
BYAJW475
4” extensions manual Heidt rack ........ £66.10
4” extensions power Heidt rack .......... £65.81
Power Steering Pipe Kit
Kit of parts to help you connect the Heidts power steering rack,
Heidts adjustable valve, & the GM integral tank, power steering
pump.
BYAJW575
Power steering pipe kit ..................... £187.28
BRAKES-not std
Mustang Master Cylinder/Servo
This is a complete dual master cylinder together with a brake
servo or booster, for disc/drum setups. These kits come complete
with proportioning valve.
BYDB-106
Master cyl/servo Mustang 64-66 ...... £234.19
Above item pictured to the right. NOT ASSEMBLED.
BYAJW330
Master cyl/servo Mustang 67-70 ...... £528.84 SP
Camaro Dual Master Cylinder/Servo
This is a complete 1” bore dual master cylinder together with a
brake servo or booster, for disc/drum setups. These kits come
complete with a proportioning valve. NOT ASSEMBLED.
BYAJW400
BYDB-118
Dual m/cyl & servo 67-69 ................. £399.17
Dual m/cyl & servo 70-81 ................. £241.50
Chevy 55-6-7 Dual Master Cylinder/Servo
This is a complete dual master cylinder together with a brake
servo or booster, for disc/drum setups. These kits come complete
with a piped up proportioning valve.
BYAJW415
Dual m/cyl & servo 55-57 ................. £485.77
Wilwood 11” Disc Brakes kit Black Callipers
Adjustable Brake Proportioning Valve
An adjustable brake proportioning valve is used to balance front
and rear brake pressures, especially in disc/drum combinations.
BYAJW445
Adj’ brake proportioning valve ........... £76.28
Disc Brake Kit 55-57 Chevy with Std Spindles
This kit has plain discs, with black callipers. The kit fits the 2”
drop Heidt spindles.
BYAJW395
11” Disc brake kit Camaro 67-69 ..... £811.87
55-57 Chevy Disc Brake Kit for 2” Drop Uprights
This kit gives you all the parts required to upgrade your Chevy 55-57
to disc brakes at the front. Making your car a whole lot safer.
This disc brake kit give you the parts required for the 55-57 Chevy, to enable
you to install disc brakes at the front, when you have the Heidt 2” drop front
uprights.
BYAJW425
BYAJW420
Disc brake kit 55-57 Chevy std ........ £355.87
Rear Brake residual Pressure Valve
Used to maintain pressure in rear drum brake pipes/hoses.
BYAJW570
10 lb residual pressure valve ............... £25.31
Real Steel Tel: 01895 440505
e-mail: [email protected]
Disc brake kit for 2” drop 55-57 ....... £282.80
S12/9
S12/9
- SUSPENSION/STEERING/BRAKES/REAR AXLE -Rear Suspension-
HEIDTS REAR SUSPENSION
HEIDTS 4 BAR- CHEVY CLASSIC TRUCK
HEIDTS 4 BAR- FORD CLASSIC TRUCK
Replaces old leaf springs. Gives a much better ride, & better cornering.
Will need Panhard rod, coil overs & coil springs
Replaces old leaf springs. Gives a much better ride, & better
cornering. Will need Panhard rod, coil overs & coil springs
BYAJW755
BYAJW760
BYAJW765
BYAJW770
BYAJW775
Chevy p/up 1947-53 weld in ............ £544.49
Chevy p/up 1954-55 weld in ............ £544.49
Chevy p/up 1955-59 weld in ............ £544.49
PANHARD ROD FOR HEIDTS 4 BAR
REAR COIL OVERS HEIDTS CLASSIC TRUCK
4 BAR
Required for Heidts 4 bar for Classic Truck. Weld on.
BYAJW780
BYAJW785
Ford p/up 1953-54 F100 weld in ...... £544.49
Ford p/up 1955-56 F100 weld in ...... £544.49
Weld on-except ‘47-54 Chevy ............ £95.98
Weld on- 1947-54 Chevy only ............ £95.98
BYAJW790
REAR COIL SPRINGS
Black- non adj damping .................... £242.45
REAR ANTI-ROLL BAR KITS
For use with Heidts 4 bar rear for Classic Truck
BYAJW440
Chevy 55-57 std suspension only ..... £171.85
Above kit has a 7/8” diameter bar with Urethane bushes
BYAJW795
BYAJW800
11” black rear coil springs 250lb ........ £97.70
11” black rear coil springs 300lb ........ £97.70
BYAJW385
BYAJW815
Camaro 67-69 with Heidts 4 bar ....... £201.96
Street Rod-universal Heidts .............. £251.54
Subframe Connectors Mustang-Coupe 1964-70
HEIDTS REAR 4 BAR KITS
This is a bolt on kit [apart from the rear axle case brackets]
complete with coil overs and springs. Does not include axle
housing.
Bolt on subframe connectors help eliminate bending, flexing &
cracking of spot-welded sheet metal panels. They also tie the front
& rear frames together creating a solid platform for increased
performance levels. For use with Heidts rear 4 bar kit.
BYAJW340
BYAJW375
BYAJW350
Mustang 1964-70 ............................ £1145.65
67-69 Cam/F-bird+Nova 68-72 ....... £1114.82
Subframe connectors 64-70 .............. £187.28
Subframe Connectors Camaro 67-69 Coupe
For use with the Pro-G front subframe kit. Bolt on subframe connectors help
eliminate bending, flexing & cracking of spot-welded sheet metal panels.
They also tie the front & rear frames together creating a solid platform for
increased performance levels.
BYAJW380
S/frame connectors Camaro Pro-G ... £162.89
AIR-RIDE REAR SUSPENSION
AIR4LINK REAR 4 BAR KITS
Here are some advantages of the rear “Air4Link”. Superior ride quality, Rubber
bushes eliminate poly bushing squeak & improve ride quality, Allows maximum suspension travel & tighter wheel to inner wing clearances, Highly
adaptable to most vehicles, Simple, straightforward installation, .219” wall
direct threaded DOM tubing for maximum strength, .188” wall alloy steel
brackets are CNC lasercut & folded for strength & accuracy. As to which
version you should use, this boils down to how much space is available. The
triangulated version is more suitable is you have very little clearance around
the tyre. Welding & basic fabrication skills are needed. Rear “springs” are
extra.
UNIVERSAL REAR BLACK SHOCKWAVES
Here is some information on the Black, non adjustable, shockwave. The ride height
of the Shockwave is much more important than the air pressure it runs at. Every
Shockwave has an optimal ride height. The further you deviate from this intended
ride height, the more ride quality & handling performance will suffer. If run too low,
the Shockwave and/or suspension may bottom out. If run too high, the excessive
air-pressure will create a stiff ride, and you may “top out” the Shockwave. In general a longer Shockwave will give more suspension travel. this will give better ride
quality because the vehicle has more distance to absorb road bumps. The heavier
the vehicle, the more important this becomes. Sold in pairs.
BY20240702 4” up to 780lb 4.1” stroke ................. £627.76
Compressed: 10.66” // Ride Height: 13” // Extended: 14.76”
BY20250702 4” up to 780lb 5” stroke .................... £627.76
Compressed: 11.56” // Ride Height: 14.5” // Extended: 16.56”
BY20240802 5” up to 1200lb 4.1” stroke ............... £627.76
Compressed: 10.66” // Ride Height: 13” // Extended: 14.76”
BY18987999 Triangulated 4 bar kit ........................ £470.82
BY19998801 Parallel 4 bar kit with panhard rod .... £575.45
BY20250802 5” up to 1200lb 5” stroke .................. £627.76
Compressed: 11.56” // Ride Height: 14.5” // Extended: 16.56”
REAR SHOCKWAVE BRACKET/MOUNT
Brackets/mounts for Shockwave.
BY90000034 Shock bracket-rear upper ....... £15.70
BY90001928 4 link mount-lwr rear w/bolts . £78.48
Real Steel Tel: 01895 440505
e-mail: [email protected]
S12/10
S12/10
- SUSPENSION/STEERING/BRAKES/REAR AXLE -Air-Suspension Control-Tanks/Pumps etc- Air-Ride Front Suspension
AIR-RIDE TANKS/PUMPS etc
MANUAL AIR-RIDE SYSTEM
RidePROe3 AIR-RIDE SYSTEM
The RidePROe3 system provides automatic adjustment with the use of an
ECU & digital display. Rise time 3-5 seconds. [BY30334100 3 seconds]. 2327 Thomas compressors, ARV4000 airvalve, 1/4” airline & fittings, electronic control. Relies solely on air pressure sensors for each spring, to adjust
the ride height. Three presets. LevelPRO height sensors available also.
The original RidePro system utilizes a quality solenoid air valve system &
dependable electric components to provide simple, & reliable control. Control panel provides simple & accurate inflate / deflate control for each
airspring. Vehicles up to 3500lbs. Rise time 3-5 seconds. 327 Thomas compressor, ARV4000 airvalve, 1/4” airline & fittings, electronic control.
BY30334000 RideproE3 >3500lb- 3 gallon tank . £1569.38
BY30334100 RideproE3 >4500lb- 5 gallon tank . £1778.63
BY30154000 Manual system- 3 gallon tank ......... £1150.88
RidePROe3 REMOTE CONTROL
AIR-LINE CUTTER
Remote control option with two “key fobs”.
BY90001081 Tubing cutter- get those “square ends” £13.08
BY31008500 E3 remote kit .................................... £156.95
AIR-RIDE FRONT SUSPENSION
Real Steel Tel: 01895 440505
e-mail: [email protected]
S12/11
S12/11
- SUSPENSION/STEERING/BRAKES/REAR AXLE Rear axle
Rear Axle
FORD RACING Small Parts Kit
Diff Carrier Gasket
BYP27857
BYP27944
BYP27807
BYP27929
GM 10 bolt
GM 12 bolt
8” Ford
9" Ford
£3.53
£3.14
£4.24
£3.66
Kit includes:- Pinion nut, O-ring, collapsible spacer, gear marking
compound, brush, and shims to set pinion gear depth.
BYM-4663-A100 Ford 9" .......................................... £26.78
ARP Ring Gear Bolt Kit
For Ford 9", 7/16" x 0.935". Special hardened, precision ground
washers are included. 190,000 PSI. Sprint car drive pins.
BYRGB-4
Ring gear bolt kit ................................ £26.76 kit
Motive Gear Hi-Performance Ring & Pinions
Designed for street use and equally at home on the drag strip and oval track.
Motive Gears allow tailoring of differentials to suit your specific needs.
Installation Kits
Motive Gear installation kits provide most of the parts required for a
crownwheel & pinion change. Kit contents vary. Ask salesperson for exact
contents of the kit you require.
BYR9RMK
Ford 9" .............................................. £114.67 kit
FORD- 9"
10 Bolt - 9.00" dia. ring gear, 1.313" dia. pinion stem.
BYF9-325*
BYF9-350*
BYF9-370*
BYF9-389*
BYF9-411*
BY890430#
BYF9-486*
*
#
Real Steel Tel: 01895 440505
e-mail: [email protected]
Ratio: 3.25
Ratio: 3.50
Ratio: 3.70
Ratio: 3.89
Ratio: 4.11
Ratio: 4.30
Ratio: 4.86
Teeth: 39-12 .................. £186.92
Teeth: 35-10 .................. £176.83
Teeth: 37-10 .................. £186.92
Teeth: 35-9 .................... £188.68
Teeth: 37-9 .................... £181.75
Teeth: 43-10 .................. £183.24
Teeth: 34-7 .................... £167.50
8620 Steel, Street gears
8620 Steel, Performance gears, double lapped & deburred