IDRO GAS ENGINEERING S.A.S.
ADVANCED FITTING SYSTEM
FOR WATER AND GAS PIPELINES
www.idrogasengineering.it
RAPIDO
Pipe saddles available from DN 25 to DN 1500, for cast
iron/ductile iron, A/C, steel, fiber-glass,
PVC/PE and concrete pipes.
Threaded or flanged outlet up to 6”.
EUROPA
Service connection valves, designed for the use also with saddles type
“RAPIDO”, with internal sealing plug with elastomeric rubber, soft sealing and
stem made of stainless steel.
Sizes from ¾” to 2”.
TREPI
Wide tolerance three-part clamps
for repairing and tapping under
pressure. Threaded or flanged
outlet up to 8”, available in sizes
from DN 40 to DN 800 for cast
iron/ductile iron, A/C, steel,
fiber-glass and concrete pipes.
DUEPI
Wide tolerance two-part clamps for repairing and tapping
under pressure. Threaded outlet ½”, available in sizes from
DN 15 to DN 200.
INOXGIS
Wrap-around clamps for repairing under pressure, produced
in a variety of lenghts for sizes from DN 15 to DN 2000.
Suitable for cast iron/ductile iron, A/C, steel,
fiber-glass, PVC/PE and concrete pipes.
ETERNO
Entirely stainless steel wrap-around clamps for repairing or
tapping under pressure, produced in a variety of lenghts for sizes
from DN 15 to DN 2000, with threaded or flanged branch up to
8”. Suitable for cast iron/ductile iron, A/C, steel,
fiber-glass, PVC/PE and concrete pipes.
STOP
Adjustable bell joint repair clamps for the leak repair of sockets
and spigot joints on cast iron/ductile iron pipes. They can also
be used for the repairing of leakages on joints of pipes of
other material (A/C, fiber glass, steel, plastic).
Available in sizes from DN 50 to DN 1200.
UNIVERSALE
Ultra-wide, wide and medium tolerance
couplings/adaptors/end-caps (compression type). Available in
sizes from DN 20 to DN 800.
UNIVERSALE SP
Tailor-made fittings in steel
(couplings/adaptors/stepped couplings/end-caps),
available in sizes from DN 100 to DN 2000.
FORATUBI
Pipe drilling machine to use in connection with our “RAPIDO”,
“TREPI”, “DUEPI” and “ETERNO” products on every kind of
pipe. Drill sizes from ½” to 6”.
CHIUSINI
Various types of surface boxes used for valves,
hydrants, air releases, etc. All types are with adjustable
height.
Idro Gas Engineering S.A.S.
Via Roma 101
13010 Motta de’ Conti (Vc)
Italy
DEALER
tel.: ++390161780400 - 780444
fax: ++390161780909 - 780411
e-mail: [email protected]
www.idrogasengineering.it
VAT: IT 01466450069
The drawings, photographs, sizes and technical datas are not binding but can be varied for constructive ormarket reasons. Even partial reproduction of texts,
drawings or photographs is forbidden by law.