Product information
ControFil 2
Rust proofing in cutting erosion
ControFil 2 was developed for wire erosion machines to prevent the undesirable
corrosion of work pieces and machines. ControFil 2 is added to the de-ionized
water. We recommend that ControFil 2 is added to the de-ionized water in a
container outside the machine and then divided equally between the dirty-water and
clean water tanks. A concentration of 0,5% guarantees optimal rust proofing.
Advantages for the use of ControFil 2:
•
•
•
•
•
•
•
•
•
•
•
No alteration of the conducting capacity of the de-ionized water
No reduction of the cutting efficiency of the machine
Low concentration (0.5 vol.%)
Physiological safety
Almost odorless
No interference with waste disposal
No influence on steel, non-ferrous or heavy metal and graphite
The processed parts can be further processed without any problems
ControFil 2 can be removed with water
Filtration of the de-ionized water is not influenced
The concentration of ControFil 2 can easily be checked with a refractometer,
(factor 1.5)
(read the number on the refractometer and multiply it with 1.5 - the result is the
concentration)
If permanent rust proofing of the work pieces taken out of the machine is desired, we
recommend aftertreatment with our CORTEC VCI products.
ControFil 2 is not suited for precoated filter systems.
11/2011