CONNECTED COMPONENTS
Simple Position Control Building Block
APPLICATIONS
Transport Systems
• Conveyor belts, elevating
platforms, building technology
• Controlling gates, fans and pumps
CONNECTED COMPONENTS BUILDING BLOCKS
Material Handling
• Diverters. smart conveyors,
gate and door
Machine Control
• Handling machines, feeding equipment,
packaging machines
Connected Components Building Blocks (CCBB) from Rockwell
Automation provide you with the information you need to quickly
and easily implement common control tasks in your machine design.
Packaging
• Packaging machine, palletizers/
de-palletizers
Take advantage of best practice based examples with:
• Lists of compatible materials
• Panel and wiring drawings
• Status and diagnostic control programs and HMI screens
• Quick start guide
• All available on CD, CC-QR001A-MU-C
CONNECTED COMPONENTS SOLUTION
The following sample bill of materials lists core products. For a complete solution bill of materials (includes power circuit components,
control circuit components, sensors and pushbuttons) order the Connected Components Building Block CD, CC-QR001A-MU-C.
SIMPLE POSITION CONTROL
Position control is a common task required in a wide variety of applications.
The Rockwell Automation position control solution provides the basic design
information to connect a positioning system, control programs and HMI
screens to make it move. The Simple Position Control CCBB allows you
to build a stand alone cost-effective component solution or include the
positioning building block as part of a more complex machine.
CCBB POSITION CONTROL BASIC PRODUCTS
Quantity
Catalog Number
Description
1
1
1763-L16BBB
1763-NC01
MicroLogix 1100, 24V dc power, (10) 24V dc digital inputs, (2) 10V analog inputs, (2) relay outputs, (4) 24V dc FET outputs
Cable: MicroLogix 1100 Channel 0 (8-pin DIN) to RS485 (6-pin Phoenix)
1
22D-D2P3N104
1
AK-U0-RJ45-TB2P
PowerFlex 40P ac drive, 480V ac, 3PH, 2.3 Amps, 1HP, frame size B, panel mount IP20 (NEMA type open)
PowerFlex 4-class DSI RJ45 terminal blocks – RJ45 two position terminal block (5 pieces)
with two 120 Ohm terminating resistors (loose)
1
845-CA-C-10
1
1
CM201-NVF3318AXZCA-334
2711C-T6C
1
2711P-CBL-EX04
Ethernet CAT5 crossover cable (industrial grade) 4.3 m (14 ft)
1
1606-XLP90E-2
AC/DC DINrail mount compact power supply, standard module 90 W, 2 phase, 480V ac input voltage
SOLUTION SPECIFIC ADVANTAGE
• Utilize a PowerFlex 40P positioning drive with a MicroLogix controller
and a PanelView Component terminal for simple positioning tasks
• Controlled positioning with linear or rotary axis (up to 30 axis)
• Simple setup and commissioning with the digital speed control drive
• Proven performance and reliable operation
• Closed loop positioning
• Uses simple industry standard PLC programming
• System control and diagnostics via operator interface
• PanelView Component provides an operator interface solution
that can communicate over Ethernet and multiple other networks.
Pre-wired cable assembly, 10 pin connector, (845F, H, T), 10 foot cable
CM201-Vector duty enclosed small ac motors, 1/3 HP, 1800 RPM, C-face foot mounted, frame size is FB560
PanelView Component 6” color touchscreen terminal
CCBB POSITION CONTROL PRODUCTS FOR PROGRAMMING
Quantity
Catalog Number
1
9324-RLM0100ENE
1
9306-4EXP02ENE
1
1203-USB
Description
RSLogix Micro Starter (English) CD-ROM
DriveExplorer for NT/2000/XP
Smart serial to SCANport/DPI adapter
For additional information, please visit www.rockwellautomation.com/go/connected
Connected Components Building
Blocks help reduce the design overhead
so you can concentrate on making your
machine the best in the market
Publication CC-AP002A-EN-P–May 2008
Copyright ©2008 Rockwell Automation, Inc. All Rights Reserved. Printed in USA.
CONNECTED COMPONENTS FOR SIMPLE POSITION CONTROL
Above is a typical representation of the components used in this system solution.
Your requirements could vary based on your specific machine needs.