OWS Tubular Running Services
10-3/4” Power Tong
with 11-3/4” Lock Jaw Back Up
This tong was specifically de-
FEATURES:
veloped to provide the smallest
The 10-3/4” Casing tong is an open-throat design that can handle
possible footprint for use in ap-
tubulars from as small as 2-3/8” to as large as 10-3/4” in diameter.
plications where space on the rig
floor is limited.
The system features two jaws in the tong and three jaws in
the backup, which encircle the pipe. Wraparound jaws and dies,
combined with our low-friction jaw technology, constant radial load
cam system, and compensating jaw design, provide exceptional
gripping capabilities with reduced pipe deformation, stress, and
marking. Using our non-marking aluminum die system or GRIT
FACE™ Dies in the tong and backup will allow stainless steel
corrosion-resistant alloy (CRA) to be run as quickly and easily as
traditional tongs run conventional steel tubulars.
SPECIFICATIONS:
Maximum Torque
40.000 ft/lbs / 54.232 Nm
Maximum Operating Pressure
3,000 P.S.I. / 207 Bar
Maximum low gear torque and speed
40.000 ft/lbs / 54.232 Nm – 4 rpm
Maximum high gear torque and speed
5.400 ft/lbs / 7321 Nm – 28 rpm
Maximum back up torque
40.000 ft/lbs @ 3000 psi
Tong Handle Length
40” / 101.6 cm
Length
65-1/4” / 165,7
Width
33-3/4” / 85,5 cm
Height
65-1/2” / 166,4 cm
Weight – Tong w/backup
4.500 lbs. / 2.041 kg
Jaw sizes
2-3/8” to 10-3/4”
NORWAY
Hammaren 19
P.O.Box 152
NO-4098 Tananger
Norway
UNITED KINGDOM
Crawpeel Road
Altens Industrial Estate
Altens Aberdeen AB12 3LG
Scotland
Tel: +47 51 64 84 00
Fax: +47 51 64 84 01
[email protected]
Tel: +44(1)224 85 6000
Fax:+44(1)224 85 6001
[email protected]
NETHERLANDS
Stehpensonweg 18ª
7741 KW Coevorden
The Netherlands
Tel: +31 (0) 524 527 000
Fax: +31 (0) 524 527 001
[email protected]
ROMANIA
Aricestii Rahtivani
–Ploiesti West Park
Cladirea SME, Mod 13&15,
Birou 3B
107025-Prahova
Romania
MIDDLE EAST,
AFRICA, ASIA
Office 3201, 32nd floor
Tiffany Tower,
W-Cluster, JLT
P.O. 17354
Dubai UAE
Tel: +40(0)344 220 102 /
+40 (0)344 220 106
[email protected]
Tel: +971 4 3640500
Fax: +971 4 3640501
[email protected]