TDE-lighttech
illuminating creativity
IZI-Drive CC2
The 2ch. Constant Current LED driver has a versatile design
and utilises hybrid dimming techniques, offering superb
brightness control down to 0,0%.
This high-power LED driver can drive up to 40 Watts per
channel, with a current that is user selectable from 150mA
to 1050mA, in 50mA steps.
The LED driver allows control via an onboard IZI-Link
interface or DMX-512 interface.
Features
High output power
Max 40W
Precise current selection
50mA steps
Wide current range
Remote configuration
150mA ~ 1050mA
With IZI-Manager software
Technical specifications
Power
Input voltage:
Output voltage:
Output power:
Channels:
Current per channel:
48VDC
Max. 40VDC
2x 40W
2
150mA ~1050mA (adjustable in steps of 50mA)
Control
Control input:
Additional input:
IZI-Link / DMX-512 - 1990 Galvanically isolated
2 x NTC 10KΩ / 1 x 10KΩ potentiometer
Miscellaneous
Housing:
Input connector:
Screw terminal input power:
Terminal block control:
Terminal block led output:
Desktop ABS plastic
Print connector
Max 2,5mm²
Max 1,5mm²
Max 1,5mm²
www.tde-lighttech.nl
TDE-lighttech
illuminating creativity
IZI-Drive CC2
Dimensions
DD+
DMX512A
INPUT
RoHS
60
INDOOR
Tc: 60°C
Ta: 40°C
IZI.DR.CC.2
+
CH2
Status
0V
LED OUTPUT
2 Channel Constant Current LED-driver
CH1
IZI-Drive CC2
48VDC
INPUT
(IZI-LINK)
+
NTC2 NTC1
+
R1
40mm
R1
30mm
R2
R2
www.tde-lighttech.com
165mm
Order Code
IZI.DR.CC.2 - IZI-Drive CC2; two channel constant current LED driver;
2 Channel Constant Current LED-driver
Status
0V
DMX Input DD+
0V
DD+
DMX512A
INPUT
RoHS
60
INDOOR
Tc: 60°C
Ta: 40°C
IZI.DR.CC.2
CH1
+
IZI-Drive CC2
48VDC
INPUT
(IZI-LINK)
+
CH2
+
LED OUTPUT
48VDC Input
(IZI-Link)
+
NTC2 NTC1
Wiring diagram
R1
+
- LED output 1
+
- LED output 2
NTC1
R1
R2
NTC2
R2
www.tde-lighttech.com
LED indication
Identify mode
The Identify mode on the IZI-manager allows identification of
each individual fixture/interface.
Firmware update
A firmware update can be done through the IZI-manager
Status
LED
Behaviour
Power ok, Data reception
Green
Blink
Power ok, No data
Red
On
Over temperature
Red
Blink
Low voltage
Red
Blink
Firmware update (IZI-manager)
Red
Blink
Identify
Red / Green
Toggle
www.tde-lighttech.nl
TDE-lighttech
illuminating creativity
IZI-Drive CC2
Configuration
Th IZI-Drive CC2 can be configured with the IZI-manager Software tool and the IZI-Link programmer cable.
The following parameters can be adjusted:
Parameters:
DMX-address:
Device-modes:
Current setting:
PWM frequency:
DMX fail start:
DMX fail operation:
Value options
1~512 (dependant on Device Mode)
M1~M7 + M16 (stand alone mode)
150mA~1050mA in steps of 50mA
Hybrid-mode / PWM-only / Analog-only modez
Off / Max / Wave
Off / Max / Wave / Hold
Default value
1
M1
150mA
Hybrid-mode
Max
Off
Next to the configuration of the driver with the IZI-manager, parameters such as internal temperature led driver, Supply
voltage, current consumption and Software version can be monitored.
User modes
M3 -
CH1
CH2
LED OUTPUT
+
R1
Status
Dual Channel Mode
DMX1 -> Ch1
DMX2 -> Ch2
NTC1 = Temperature Sensing
NTC2 = Optional Current Override
www.tde-lighttech.nl
Single colour
R1
R2
R2
+
CH2
CH1
Dual Channel + Master Mode
DMX1 -> Master
DMX2 -> Ch1
DMX3 -> Ch2
NTC1 = Temperature Sensing
NTC2 = Optional Current Override
+
NTC2 NTC1
Status
LED OUTPUT
M2 -
Single Channel mode:
DMX1 -> Ch1
DMX2 -> Ch2
NTC1 = Temperature Sensing
NTC2= Optional Current Override
+
NTC2 NTC1
M1 -
Connection options
R1
R1
R2
R2
Tunable white
TDE-lighttech
illuminating creativity
IZI-Drive CC2
User modes (Continued)
M4 -
Dual Channel mode
DMX1 -> Ch1
DMX2 -> Ch2
NTC1 = Temperature Sensing Ch1
NTC2 = Temperature Sensing Ch2
M5 -
Dual Channel Tunable White Mode
DMX1 -> Intensity
DMX2 -> Color
NTC1 = Temperature Sensing
NTC2 = Optional Current Override
M6 -
Single Channel Tunable White Mode
DMX1 -> Intensity/Color, Halogen like
NTC1 = Temperature Sensing
NTC2 = Optional Current Override
M7 -
Single Channel Tunable White Analog Control
Mode, No DMX
NTC1 = Temperature Sensing
NTC2 = Analog Control by 10k Potentiometer
M16 -
Analog Control Mode, No DMX
NTC1 = Temperature Sensing
NTC2 = Analog Control by 10k Potentiometer
Current settings
0=
1=
2=
3=
4=
5=
6=
7=
8=
9=
10 =
11 =
12 =
13 =
14 =
15 =
16 =
17 =
18 =
Current
150mA
200mA
250mA
300mA
350mA
400mA
450mA
500mA
550mA
600mA
650mA
700mA
750mA
800mA
850mA
900mA
950mA
1000mA
1050mA
PWM Modes
0=
1=
2=
Hybrid Dimming Mode
PWM Dimming only
Analog Dimming only
For more information about configuring with the IZI-manager, see manual of the IZI-manager
www.tde-lighttech.nl
TDE-lighttech
illuminating creativity
IZI-Drive CC2
CH1
Status
+
CH2
The 10KΩ Potentiometer controls the intensity of all channels 1
through 4 simultaneously .
LED OUTPUT
When configured in stand alone mode (M16) a 10KΩ
Potentiometer can be connected on to NTC2 terminal block.
+
NTC2 NTC1
Stand alone
R1
R1
R2
R2
Potentiometer 10KΩ
Current override
Mode
0=
1=
2=
3=
4=
5=
6=
Current
150mA
200mA
250mA
300mA
350mA
400mA
450mA
Resistor (R)
0 Ohm
180 Ohm
390 Ohm
560 Ohm
820 Ohm
1000 Ohm
1200 Ohm
Mode
7=
8=
9=
10 =
11 =
12 =
13 =
Current
500mA
550mA
600mA
650mA
700mA
750mA
750mA
Resistor (R)
1500 Ohm
1800 Ohm
2200 Ohm
2700 Ohm
3300 Ohm
3900 Ohm
4700 Ohm
www.tde-lighttech.nl
CH2
Status
LED OUTPUT
The below table shows the current output with the
corresponding resistor value.
+
+
NTC2 NTC1
CH1
If configuring with the IZI-Link is not wanted or possible, the
current output can be configured by adding an external
resistor on the NTC2 terminal.
R1
R
R1
R2
R2
Mode
14 =
15 =
16 =
17 =
18 =
Current
850mA
900mA
950mA
1000mA
1050mA
Resistor (R)
5600 Ohm
6800 Ohm
8200 Ohm
10000 Ohm
12000 Ohm