Barcode scanner VB12-220-S-R Technical Data General specifications Light source Light type Laser nominal ratings Note Laser class Wave length Beam divergence Pulse length Repetition rate max. pulse energy Scan rate Reading angle Read distance Optical face Resolution laser diode modulated visible red light LASER LIGHT , DO NOT STARE INTO BEAM 2 650 nm < 1.5 mrad 0.45 ms 500 Hz 0.45 µJ 350 s-1 or 500 s-1 70 ° 30 ... 220 mm Lateral (broad side at 78° angle ) 0.2 mm ( 8 mils ) Indicators/operating means Operating display LED red: Power on (POWER ON) , LED green: Laser on (LASER ON), LED yellow: external trigger signal applied (EXT. TRIG.) LED green flashing: Data transfer carried out (TX-DATA) LED red: signals the successful read-in of a barcode (GOOD READ) Data flow display Function display Model Number VB12-220-S-R Electrical specifications Operating voltage Power consumption UB P0 10 ... 30 V DC 1.5 W Barcode scanner Interface Interface type serial , RS 232 and RS 485 up to 115.2 kBit/s Features Input 1 Input type External triggering • Grid scanner Input 2 Input type Digital input programmable • Optimal price/power ratio Output Signal output Switching voltage Switching current Voltage drop 2 outputs programmable max. 50 V DC max. 50 mA 0.3 V at load current ≤ 10 mA • Large reading angle • Flat housing • Side light outlet enables installation when space is at a premium • Engine control (On/Off) possible Accessories CBX100 Connector box for barcode scanner Other suitable accessories can be found at www.pepperl-fuchs.com Ud Ambient conditions Ambient temperature Storage temperature Relative humidity Shock resistance Vibration resistance Mechanical specifications Protection degree Connection Material Housing Cable Length Mass 0 ... 45 °C (32 ... 113 °F) -20 ... 70 °C (-4 ... 158 °F) 90 % , noncondensing IEC 68-2-27 Test EA 30G; 11 ms; 3 impacts on each axis IEC 68-2-6 Test FC 1.5 mm ; 10 ... 55 Hz ; 2 hours on each axis IP65 25-pin Sub-D connector Magnesium, Polycarbonate L EMC Directive 2004/108/EC EN 61000-6-2:2005 EN 55022 EN 60529 IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 Release Date: 2011-01-18 10:21 Date of issue: 2011-01-18 115180_ENG.xml Compliance with standards and directives Directive conformity Standard conformity Noise immunity Emitted interference Protection degree Laser class 100 cm 100 g Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany Pepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091 • Internet http://www.pepperl-fuchs.com 1 Barcode scanner VB12-220-S-R Dimensions Mounting angle VB12 18 9 10.8 3.2 21 30 Laser beam 22.5 12° ± 2° 50 15. 4 21 3.2 = 10.8 30 61 64.3 = 2 2 4 M3 80 9 3.2 3 x 45° 3 x 45° 3.2 9 7.7 9 6 4 Electrical connection 13 25 1 14 Name 10 V ... 30 V DC Function Power supply input voltage + 25 1* 2, 21 GND CHASSIS TX232 Power supply input voltage Chassis ground TX RS232 aux. Interface 3, 20 4 5 7 8 11 19 12, 22 18 6, 10, 14, 15, 16, 17, 23, 24 RX232 RTX485RTX485+ SGND OUT1+ OUT2+ Ext. TRIG. GND IN1- RX RS232 aux. Interface RTX- RS485 main Interface RTX+RS485 main Interface Siganl ground Output 1 + Output 2 + External trigger Input/Output reference (Mass) Input 1 - NC Not connected 115180_ENG.xml 25-pin D-sub connector pinout Pin 9, 13 Release Date: 2011-01-18 10:21 Date of issue: 2011-01-18 * Pin 1 and pin 25 are internally interconnected. Subject to reasonable modifications due to technical advances. 2 Copyright Pepperl+Fuchs, Printed in Germany Pepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091 • Internet http://www.pepperl-fuchs.com Barcode scanner VB12-220-S-R Curves / diagrams Reading characteristics VB12-220 Read field width in mm 100 80 60 40 20 0,3 mm 0 0,2 mm 20 ≥ 0,5 mm 40 60 80 100 0 20 40 60 80 100 120 140 160 180 200 220 240 Read range in mm Laser notice laser class 2 Release Date: 2011-01-18 10:21 Date of issue: 2011-01-18 115180_ENG.xml • The irradiation can lead to irritation especially in a dark environment. Do not point at people! • Caution: Do not look into the beam! • Maintenance and repairs should only be carried out by authorized service personnel! • Attach the device so that the warning is clearly visible and readable. • Caution – Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany Pepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091 • Internet http://www.pepperl-fuchs.com 3
© Copyright 2024 Paperzz