Quality of Materials
HIGH-DENSITY
POLYETHYLENE PANELS
H
COMPLIANT WIT
NDARD
CANADIAN STA
CAN/CSA -Z614
Excellent resistance to impact
Textured on 2 sides to reduce scratches
Treated to withstand deterioration caused by sunlight
Colours: White, black, yellow, red, green, blue and tan.
High-density polyethylene 59.3 lb/ft3
[0.950 g/cm3] ASTM D 792
High molecular weight (HMW HDPE)
Tensile Strength: 3800 lb/in2
[26.2 MPa] ASTM D 638
er
High
ALUMINIUM
CAP
!
lass
c
y
it
Flo-Coat
abil
dur
Integrally-moulded aluminium
Fastened by 2 self-sealing aluminium rivets
Spherically shaped on top
Colours: White, yellow, orange, red, khaki, gray
metallic, fuchsia, blue and green.
Robust, 1/4" [6,4mm] thick No protrusions or
designated surface Factory-installed
Galvanized
steel®
SQUARE
ALUMINIUM POST
Exterior diameter and thickness available
Round 2 3/8"-14ga, 2 3/8"-12ga, 3 1/2"-11ga,
Produced by extrusion from our moulds Surfaces
textured to reduce effects of vandalisme
Colours: White, yellow, orange, red, khaki,brown, metallic
1"-14ga,1 1/2"-14ga, 2 7/8"-8ga, 4 1/2"-11ga, 1 5/16"-14ga
Square 1 1/4" x 1 1/4"-11ga
gray, black, hot pink, blue and green.
Yield Point: 50 ksi [345 MPa]
Tensile Strength: 55 ksi [380 Mpa]
Colours: White, yellow, orange, red,
Column 3 1/2" x 3 1/2" square [89mm x 89mm]
Thickness 1/8" [3mm]
Aluminium 6061-T6
Rounded corners 3/4" [20mm]
Yield Point: 45.0 ksi [310 Mpa]
Breaking Load: 40.0 ksi [276 MPa]
Brinell Hardness: 95
khaki,brown, metallic gray,black, hot pink,
blue and green.
Meets ASTM A500 standard for manufacturing
Welded with 309L stainless steel alloy wire using GMAW procedure on
304 stainless steel plate.Yield Point: 58 ksi [400 MPa] Tensile Strength: 85
ksi [586 MPa]
Medium-density polyethylene 58.2 lb/ft3 [0.932 g/cm3]
Treated to withstand deterioration caused by sunlight
Colours: Yellow, orange, red, hot pink,
tan, forest green, blue and purple.
ASTM D-1505
Tensile Limit: 2200 lb/in2 [15 MPa]
Resistance to impact ISO 6603-2 specimens
1/4" [6.4mm]) 160 ft.lb. [217 joules]
Single piece with double walls
Average thickness of 1/4" [6.4mm]
PLASTYGO
DECKS Square Single-Piece Platform 3' x 3' [0.9m x 0.9m],
30 to 50 thousandths of an inch thick
Applied by dip coating into a tank onto a high temperature
preheated prined metal parts.
Colours : Green, tan and gray.
ROTO-MOULDED
POLYETHYLENE
9 sq. ft. [0.89m2] surface Made of 11 calibre steel sheet, with staggered
perforations
1/2" Ø x 11/16" [12mm Ø x 18mm]
Flat steel contours 2" x 1/4" [50 mm x 6.4 mm]
Flat steel reinforcements 1 1/2x 1/8" [44 mm x 3 mm]
Hardness: D80
Flammability: self-extinguishing
URETHANE-COATED GALVANIZED steel cables
Paint
Urethane-coated aviation cable, minimum diameter of 5/8" [16mm]
Treated to withstand deterioration caused by sunlight
Diameter of aviation cable: 7 x 19, 3/8" [10mm]
Hot-dip galvanized steel
Standard RR-W-410F
Tensile Strength: 14,400 lb [6,532 kg]
Tensile Limit: 725 lb/in2 [5 MPa]
Series 49 polyester electro-static powdering Cooked at 415°F [213°C] for 20
minutes Thickness: ±3 mils [±75 Micron]
Tested to conform to:ASTM D3359 Method B (Cross cut tape test) 5B
ASTM D522 Mandrel bending test
ASTM D2794 Impact test
ASTM D3363 Pencil hardness 2H minimum
ASTM D2247 Humidity resistance 500 hours
ASTM B117 Salt spray resistance 500 hours
Colours : White, yellow, orange, red, brown, khaki, metallic gray, black, hot pink
blue and green.
Connecters are forged, zinc-plated eye-bolts
Diameter of connecters: 3/8" [10mm] Installed with compressible aluminium joints
Intersection joints in ultra high-density black polyethylene (UHMWHDPE), machined and
fastened with stainless steel screws
Fasteners are hot-dip galvanized shackles with stainless steel anti-vandalism bolts,
3/8" [10mm] in diameter.
STAINLESS STEEL hardware
302HQ-grade stainless steel bolt Anti-vandalism protection
Yield Point: 26.3 ksi [181 MPa] Tensile Strength: 67.3 ksi [464 MPa]
POST fastening system
Steel nut pressure-riveted to column
No collar to prevent jamming of openings and positioning errors
Breakout Force: 1,115 lbf [4,960 N]
Zinc- and yellow dichromate-plated according to ASTM 633-85, TYPE II, Fe/Zn8
POLYeTHYLeNE border
Roto-moulded, in our moulds
Treated to withstand deterioration caused by sunlight
Can be installed above or below ground
Medium-density polyethylene (MDPE) 58.6 lb/ft3 [0.938 g/cm3] ASTM D 792
Dimensions: 12" x 6" x 73" with anchoring studs
[300mm x 150mm x 1854mm with anchoring studs]
Weight: 20 pounds [9 kg]
Tensile Strength: 3000 lb/in2 [20.6 MPa] ASTM D 638
Colours : Black
Anchoring Studs 3/4" Ø x 28" [19mm Ø x 710mm], hot-dip galvanized
Swivel joint with mortise and tenon, allowing edge orientation and
maximum strength Dual packaging system for better stability.