DEADBOLTS - SOLID BRASS
Quincy Style Deadbolt
13⁄8"
21⁄2"
Exterior Trim (8478)
• Projection is 1⁄2"
• 8378 same on both sides
21⁄2"
Interior Trim (8478)
• Projection is 11⁄4"
• Thickness is 5⁄16"
Wilshire Style Deadbolt
21⁄2"
3"
Exterior Trim (8479)
• Projection is 1⁄2"
• 8379 same on both sides
A1
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
21⁄2"
Interior Trim (8479)
• Projection is 1"
• Thickness is 5⁄16"
Tel: 800.356.2741 Fax: 800.577.5771
www.emtek.com
DEADBOLTS - SOLID BRASS
Regular Style Deadbolt
13⁄8"
23⁄8" Dia.
Exterior Trim (8450)
• Projection is ₁₃⁄16"
• 8350 same on both sides
• Available Extension Collar for Thin Doors
21⁄2" Dia.
Interior Trim (8450)
• Projection is 11⁄4"
• Thickness is 5⁄16"
Low Profile Style Deadbolt
13⁄8"
*21⁄2" Dia.
**23⁄8"
Exterior Trim (8455)
* 2 1⁄2" Diameter with Exterior ring
** 2 3⁄8" Diameter without Exterior ring
• Projection with Exterior ring: 7⁄8"
• Projection without Exterior ring: 5⁄8"
• 8355 same both sides
• Available Extension Collar for Thin Doors
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
21⁄2" Dia.
Interior Trim (8455)
• Projection is 11⁄4"
• Thickness is 5⁄16"
Tel: 800.356.2741 Fax: 800.577.5771
www.emtek.com
A2
DEADBOLTS - SOLID BRASS
Rope Style Deadbolt
13⁄8"
*23⁄4" Dia.
**23⁄8"
Exterior Trim (8464)
* 2 1⁄2" Diameter with Exterior ring
** 23⁄8" Diameter without Exterior ring
• Projection with ext. ring: 11⁄16"
• Projection without ext. ring: 1⁄2"
• 8364 same both sides
21⁄2" Dia.
Interior Trim (8464)
• Projection is 11⁄4"
• Thickness is 5⁄16"
#8 Style Deadbolt
13⁄8"
35⁄8"
35⁄8"
21⁄2"
21⁄2"
Interior Trim (8466)
• Projection is 11⁄4"
• Thickness is 5⁄16"
Exterior Trim (8466)
• Projection is 1⁄2"
• 8366 same on both sides
Rectangular Style Deadbolt
2 3⁄4"
13⁄8"
27⁄16"
Exterior Trim (8468)
• Projection is 9⁄16"
• 8368 same on both sides
A3
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
23⁄4"
27⁄16"
Interior Trim (8468)
• Projection is 11⁄4"
• Thickness is 9⁄32"
Tel: 800.356.2741 Fax: 800.577.5771
www.emtek.com
DEADBOLTS - SOLID BRASS
Square Style Deadbolt
1 3⁄ 8”
2 1⁄ 2”
21⁄ 2”
21⁄ 2”
21 ⁄ 2”
Exterior Trim (8469)
• Projection is 5⁄ 8”
• 8369 same on both sides
Interior Trim (8469)
• Projection is 11 ⁄ 4”
• Thickness is 5⁄ 16”
Modern Style Deadbolt
13⁄8"
23⁄8” Dia.
23⁄8" Dia.
Exterior Trim (8467)
• Projection is 5⁄8"
• 8367 same on both sides
Interior Trim (8467)
• Projection is 11⁄4"
• Thickness is 5⁄16"
Neos Style Deadbolt
2 1/2"
2 1/2"
2 3/4"
1 3/8"
Exterior Trim (8475)
• Projection is 5⁄8"
• 8375 same on both sides
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
2 3/4"
Interior Trim (8475)
• Projection is 1”
• Thickness is 3⁄8"
Tel: 800.356.2741 Fax: 800.577.5771
www.emtek.com
A4
DEADBOLTS - SOLID BRASS
Knoxville Style Deadbolt
1 3⁄ 8”
35⁄ 8”
3 5⁄ 8”
21⁄ 2”
2 1⁄ 2”
Exterior Trim (8459)
• Projection is 1⁄ 2”
• 8359 same on both sides
Interior Trim (8459)
• Projection is 11 ⁄ 4”
• Thickness is 1⁄ 2”
Arts & Crafts Style Deadbolt
1 3⁄ 8”
2 1⁄ 2”
21⁄ 2”
21⁄ 2”
2 1⁄ 2”
Exterior Trim (8454)
• Projection is 9⁄ 16”
• 8354 same on both sides
Interior Trim (8454)
• Projection is 11 ⁄ 4”
• Thickness is 5⁄ 16”
Saratoga Style Deadbolt
3 5⁄8"
13⁄8"
21⁄2"
Exterior Trim (8458)
• Projection is 1⁄2"
• 8358 same on both sides
A5
A5
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
3 5⁄8"
21⁄2"
Interior Trim (8458)
• Projection is 11⁄4"
• Thickness is 1⁄2"
Tel: 800.356.2741 Fax: 800.577.5771
www.emtek.com
BRASS - Door Thickness Specifications
Brass Regular Style Deadbolt, Single Cylinder
Regular Style (8450)
• Standard Door Thickness: 13⁄ 8”- 21 ⁄ 8”
Standard Components:
• 21⁄ 4” Deadbolt Mounting Screws
• Deadbolt Strike Plate
• Extended Door Thickness: 21⁄ 8”- 23⁄ 4”
Extended Components:
• Long Single Cylinder Tailpiece
• 21⁄ 2” & 3” Deadbolt Mounting Screws
• Deadbolt Strike Plate
• Extended Door Thickness: 23⁄ 4”- 3”
Extended Components:
• Extra Long Single Cylinder Tailpiece
• 31⁄ 2” Deadbolt Mounting Screws
• Deadbolt Strike Plate
Brass Regular Style Deadbolt, Double Cylinder
Regular Style (8350)
• Standard Door Thickness: 13⁄ 8”- 13⁄ 4”
Standard Components:
• Double Cylinder Tailpieces
• 21⁄ 2” & 3” Deadbolt Mounting Screws
• Deadbolt Strike Plate
• Extended Door Thickness: 13⁄ 4”- 21⁄ 2”
Extended Components:
• Long Double Cylinder Tailpieces
• 31⁄ 2” Deadbolt Mounting Screws
• Deadbolt Strike Plate
Brass Low Profile & Rope Style Deadbolt, Single Cylinder
Low Profile (8455)* & Rope Style (8464)
• Standard Door Thickness: 11⁄ 4”- 21 ⁄ 4”
Standard Components:
• Single Cylinder Tailpiece
• 21⁄ 4” Deadbolt Mounting Screws
• Deadbolt Strike Plate
• Extended Door Thickness: 21⁄ 4”- 23⁄ 4”
Extended Components:
• Long Single Cylinder Tailpiece
• 3” Deadbolt Mounting Screws
• Deadbolt Strike Plate
• Extended Door Thickness: 23⁄ 4”- 3”
Extended Components:
• Extra Long Single Cylinder Tailpiece
• 31⁄ 2” Deadbolt Mounting Screws
• Deadbolt Strike Plate
* Part # DB4-COLRG2 Available for 13 ⁄ 8” Thick Doors
Brass Low Profile & Rope Style Deadbolt, Double Cylinder
Low Profile (8355) & Rope Style (8364)
• Standard Door Thickness: 11⁄ 4”- 21⁄ 8”
Standard Components:
• Double Cylinder Tailpieces
• 21⁄ 2” & 3” Deadbolt Mounting Screws
• Deadbolt Strike Plate
A6
• Extended Door Thickness: 21⁄ 8”- 27⁄ 8”
Extended Components:
• Long Double Cylinder Tailpieces
• 3” & 31⁄ 2” Deadbolt Mounting Screws
• Deadbolt Strike Plate
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
Tel: 800.356.2741 Fax: 800.577.5771
www.emtek.com
BRASS - Door Thickness Specifications
Brass Deccorative Deadbolt, Single Cylinder
Style #8 (8466), Arts & Crafts (8454), Rectangular (8468), Saratoga (8458) & Knoxville (8459), Quincy (8478)
• Standard Door Thickness: 13⁄ 4”- 21 ⁄ 8”
Standard Components:
• Single Cylinder Tailpiece
• 21⁄ 4” Deadbolt Mounting Screws
• Deadbolt Strike Plate
• Extended Door Thickness: 21⁄ 8”- 23⁄ 4”
Extended Components:
• Long Single Cylinder Tailpiece
• 21⁄ 2” & 3” Deadbolt Mounting Screws
• Deadbolt Strike Plate
• Extended Door Thickness: 23⁄ 4”- 3”
Extended Components:
• Extra Long Single Cylinder Tailpiece
• 31⁄ 2” Deadbolt Mounting Screws
• Deadbolt Strike Plate
Brass Deccorative Deadbolt, Double Cylinder
Style #8 (8366), Arts & Crafts (8354), Rectangular (8368), Saratoga (8358) & Knoxville (8359), Quincy (8378)
• Standard Door Thickness: 11⁄ 2”- 17⁄ 8”
Standard Components:
• Double Cylinder Tailpieces
• 21⁄ 2” Deadbolt Mounting Screws
• Deadbolt Strike Plate
• Extended Door Thickness: 17⁄ 8”- 25⁄ 8”
Extended Components:
• Long Double Cylinder Tailpieces
• 3” & 31⁄ 2” Deadbolt Mounting Screws
• Deadbolt Strike Plate
* Part # DB4-COLLAR32 Available for 13 ⁄ 8” Thick Doors
Brass Modern Deadbolts, Single Cylinder
Modern Style (8467) & Square Style (8469)
• Standard Door Thickness: 13⁄ 4”- 21 ⁄ 8”
Standard Components:
• Single Cylinder Tailpiece
• 21⁄ 4” Deadbolt Mounting Screws
• Deadbolt Strike Plate
• Extended Door Thickness: 21⁄ 8”- 23⁄ 4”
Extended Components:
• Long Single Cylinder Tailpiece
• 21⁄ 2” & 3” Deadbolt Mounting Screws
• Deadbolt Strike Plate
• Extended Door Thickness: 23⁄ 4”- 3”
Extended Components:
• Extra Long Single Cylinder Tailpiece
• 31⁄ 2” Deadbolt Mounting Screws
• Deadbolt Strike Plate
Brass Modern Deadbolts, Double Cylinder
Modern Style (8367) & Square Style (8369)
• Standard Door Thickness: 11⁄ 2”- 17⁄ 8”
Standard Components:
• Double Cylinder Tailpieces
• 21⁄ 2” Deadbolt Mounting Screws
• Deadbolt Strike Plate
• Extended Door Thickness: 17⁄ 8”- 25⁄ 8”
Extended Components:
• Long Double Cylinder Tailpieces
• 3” & 31⁄ 2” Deadbolt Mounting Screws
• Deadbolt Strike Plate
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
Tel: 800.356.2741 Fax: 800.577.5771
www.emtek.com
A7
BRASS - Door Thickness Specifications & Strike Plates
Brass Single-Sided Deadbolts
• Standard Door Thickness: 15⁄ 8”- 23⁄ 8
Standard Components:
• Single Cylinder Tailpiece
• 13⁄ 4” Deadbolt Mounting Screws
• Deadbolt Strike Plate
• Extended Door Thickness: 23⁄ 8- 23⁄ 4”
Extended Components:
• Long Single Cylinder Tailpiece
• 21⁄ 4” Deadbolt Mounting Screws
• Deadbolt Strike Plate
• Extended Door Thickness: 27⁄ 8”- 33⁄ 8
Extended Components:
• Extra Long Single Cylinder Tailpiece
• 21⁄ 2” & 3” Deadbolt Mounting Screws
• Deadbolt Strike Plate
Deadbolt Strike Plates
Standard
Heavy Duty
Steel Understrike
Heavy Duty
Full Lip Deadbolt
Understrike
TS-DB REV17A
A8
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
Tel: 800.356.2741 Fax: 800.577.5771
06/15/2017
www.emtek.com
DEADBOLTS - SANDCAST BRONZE
Bronze Regular Style Deadbolt
1 3⁄ 8”
23⁄ 8” Dia.
21⁄ 2” Dia.
Exterior Trim (8450)
• Projection is 1”
• 8350 same on both sides
Interior Trim (8450)
• Projection is 11 ⁄ 4”
• Thickness is 5 ⁄ 16”
#1 Style Plate with Flap Deadbolt
37⁄ 16”
37⁄ 16”
23⁄ 8”
Exterior Trim (8457)
• Projection is 13 ⁄ 16”
• 8357 same on both sides
2 3⁄ 8”
Interior Trim (8457)
• Projection is 11 ⁄ 4”
• Thickness is 1⁄ 2”
#3 Style Plate with Flap Deadbolt
3”
3”
Exterior Trim (8465)
• Projection is 11⁄ 16”
• 8365 same on both sides
27⁄ 16”
B1
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
Interior Trim (8465)
• Projection is 11 ⁄ 4”
• Thickness is 1⁄ 2”
27⁄ 16”
Tel: 800.356.2741 Fax: 800.577.5771
www.emtek.com
DEADBOLTS - SANDCAST BRONZE
#4 Style Plate with Flap Deadbolt
31⁄ 2”
3 1⁄ 2”
Exterior Trim (8474)
• Projection is 11⁄ 16”
• 8374 same on both sides
Interior Trim (8474)
• Projection is 11 ⁄ 4”
• Thickness is 3⁄ 8”
2 5⁄ 8”
25 ⁄ 8 ”
#6 Ridgemont Style Plate with Flap Deadbolt
3 1⁄ 2”
31⁄ 2”
25⁄ 8”
Exterior Trim (8476)
• Projection is 15⁄ 16”
• 8376 same on both sides
2 5⁄ 8”
Interior Trim (8476)
• Projection is 15⁄ 16”
• Thickness is 1⁄ 2”
Standard with Sandcast Bronze Deadbolt Locks
• Schlage C Keyway
• Standard Door Prep and Installation
• Solid Brass Cylinder
• Sandcast Bronze Collar and Inside Rosette
• Hardened Steel Bolt
• Heavy Gauge Steel Understrike and Brass Trim Strike Shipped with Every Deadbolt
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
Tel: 800.356.2741 Fax: 800.577.5771
www.emtek.com
B2
BRONZE - Door Thickness Specifications
Bronze Regular Style Deadbolt, Single Cylinder
Regular (8450)*
• Standard Door Thickness: 13⁄ 4”- 23⁄ 4”
Standard Components:
• Single Cylinder Tailpiece
• 21⁄ 4” & 21⁄ 2” Deadbolt Mounting Screws
• Deadbolt Strike Plate
• Extended Door Thickness: 2”- 21⁄ 2”
Extended Components:
• Long Single Cylinder Tailpiece
• 3” Deadbolt Mounting Screws
• Deadbolt Strike Plate
• Extended Door Thickness: 21⁄ 2”- 3”
Extended Components:
• Extra Long Single Cylinder Tailpiece
• 31⁄ 2” Deadbolt Mounting Screws
• Deadbolt Strike Plate
*No Extension Collars Available for this Model
Bronze Regular Style Deadbolt, Double Cylinder
Regular (8350)*
• Standard Door Thickness: 13⁄ 4”- 2”
Standard Components:
• Long Double Cylinder Tailpieces
• 3”& 31⁄ 2” Deadbolt Mounting Screws
• Deadbolt Strike Plate
*No Extension Collars Available for this Model
Bronze Decorative Deadbolts, Single Cylinder
#1 (8457), #3 (8465), #4 (8474), Ridgemont (8476)
• Standard Door Thickness: 13⁄ 4”- 21 ⁄ 8”
Standard Components:
• Single Cylinder Tailpiece
• 21⁄ 2” & 3” Deadbolt Mounting Screws
• Deadbolt Strike Plate
• Extended Door Thickness: 21⁄ 8”- 3”
Extended Components:
• Long Single Cylinder Tailpiece
• 3” & 31⁄ 2” Deadbolt Mounting Screws
• Deadbolt Strike Plate
Bronze Decorative Deadbolts, Double Cylinder
#1 (8357) , #3 (8365), #4 (8374), Ridgemont (8376)
• Standard Door Thickness: 13⁄ 4”- 23⁄ 8”
Standard Components:
• Double Cylinder Tailpieces
• 21⁄ 4” & 21⁄ 2” Deadbolt Mounting Screws
• Deadbolt Strike Plate
B3
• Extended Door Thickness: 17⁄ 8”- 25⁄ 8”
Extended Components:
• Long Double Cylinder Tailpieces
• 3” & 31⁄ 2” Deadbolt Mounting Screws
• Deadbolt Strike Plate
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
Tel: 800.356.2741 Fax: 800.577.5771
www.emtek.com
Bronze Single-Sided Deadbolts
Regular Style (8450)
• Standard Door Thickness: 13⁄ 8”- 23⁄ 8”
Standard Components:
• Single Cylinder Tailpiece
• 13⁄ 4” Deadbolt Mounting Screws
• Deadbolt Strike Plate
• Extended Door Thickness: 23⁄ 8” - 23⁄ 4”
Extended Components:
• Long Single Cylinder Tailpiece
• 21⁄ 4” Deadbolt Mounting Screws
• Deadbolt Strike Plate
• Extended Door Thickness: 27⁄ 8”- 33⁄ 8”
Extended Components:
• Extra Long Single Cylinder Tailpiece
• 21⁄ 2” & 3” Deadbolt Mounting Screws
• Deadbolt Strike Plate
Bronze Single-Sided Deadbolts with Flaps
#1 (8457), #3 (8465), #4 (8474), Ridgemont (8476)
• Standard Door Thickness: 13⁄ 4”- 23⁄ 8”
Standard Components:
• Single Cylinder Tailpiece
• 13⁄ 4” Deadbolt Mounting Screws
• Deadbolt Strike Plate
• Extended Door Thickness: 23⁄ 8” - 23⁄ 4”
Extended Components:
• Long Single Cylinder Tailpiece
• 21⁄ 4” Deadbolt Mounting Screws
• Deadbolt Strike Plate
• Extended Door Thickness: 27⁄ 8”- 33⁄ 8”
Extended Components:
• Extra Long Single Cylinder Tailpiece
• 21⁄ 2” & 3” Deadbolt Mounting Screws
• Deadbolt Strike Plate
Deadbolt Strike Plates
Standard
Heavy Duty
Steel Understrike
Heavy Duty
Full Lip Deadbolt
Understrike
TS-DB REV17A
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
Tel: 800.356.2741 Fax: 800.577.5771
06/15/2017
www.emtek.com
B4
DEADBOLTS - LOST WAX CAST BRONZE
Tuscany Style Deadbolt
13⁄ 8”
*23⁄ 4” Dia.
21⁄ 2” Dia.
**23⁄ 8”
Exterior Trim (8456)
* 23 ⁄ 4” Diameter with Exterior ring
** 23 ⁄ 8” Diameter without Exterior ring
• Projection with ext. ring: 1”
• Projection without ext. ring: 11⁄ 16”
• 8356 same both sides
• Available Extension Collar for Thin Doors
Interior Trim (8456)
• Projection is 11 ⁄ 4”
• Thickness is 5 ⁄ 16”
Tuscany Classic Style Deadbolt
1 3⁄ 8”
*23⁄ 4” Dia.
38
**2 ⁄ ”
Exterior Trim (8471)
* 23 ⁄ 4” Diameter with Exterior ring
** 23 ⁄ 8” Diameter without Exterior ring
• Projection with ext. ring: 1”
• Projection without ext. ring: 11⁄ 16”
• 8371 same both sides
• Available Extension Collar for Thin Doors
21⁄ 2” Dia.
Interior Trim (8471)
• Projection is 11 ⁄ 4”
• Thickness is 5 ⁄ 16”
Octagon Style Deadbolt
13⁄ 8”
2 3⁄ 8”
Exterior Trim (8460)
• Projection is 3⁄ 4”
• 8360 same on both sides
C1
C1
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
2 1⁄ 2”
Interior Trim (8460)
• Projection is 11 ⁄ 4”
• Thickness is 5 ⁄ 16”
Tel: 800.356.2741 Fax: 800.577.5771
www.emtek.com
DEADBOLTS - LOST WAX CAST BRONZE
#11 Style Deadbolt
37⁄ 16”
37⁄ 16”
27⁄ 16”
27⁄ 16”
Exterior Trim (8472)
• Projection is 11⁄ 16”
8372 same both sides
Interior Trim (8472)
• Projection is 11 ⁄ 4”
• Thickness is 9⁄ 16”
#14 Style Deadbolt
3 5⁄ 8”
3 5⁄ 8”
2 1⁄ 2”
2 1⁄ 2”
Exterior Trim (8473)
• Projection is 11⁄ 16”
8373 same both sides
Interior Trim (8473)
• Projection is 11 ⁄ 4”
• Thickness is 9⁄ 16”
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
Tel: 800.356.2741 Fax: 800.577.5771
www.emtek.com
C2
LOST WAX CAST BRONZE - Door Thickness Specifications
Bronze Tuscany & Tuscany Classic Style Deadbolt, Single Cylinder
Tuscany (8456)* & Tuscany Classic (8471)
• Standard Door Thickness: 13⁄ 4”- 21 ⁄ 4”
Standard Components:
• Single Cylinder Tailpiece
• 21⁄ 4” Deadbolt Mounting Screws
• Deadbolt Strike Plate
• Extended Door Thickness: 21⁄ 4”- 23⁄ 4”
Extended Components:
• Long Single Cylinder Tailpiece
• 3” Deadbolt Mounting Screws
• Deadbolt Strike Plate
• Extended Door Thickness: 23⁄ 4”- 33⁄ 8”
Extended Components:
• Extra Long Single Cylinder Tailpiece
• 31⁄ 2” Deadbolt Mounting Screws
• Deadbolt Strike Plate
* Part # DB4-TUSDBRG Available for 13 ⁄ 8” Thick Doors
Bronze Tuscany & Tuscany Classic Style Deadbolt, Double Cylinder
Tuscany (8356) & Tuscany Classic (8371)
• Standard Door Thickness: 13⁄ 4”- 21⁄ 8”
Standard Components:
• Double Cylinder Tailpieces
• 21⁄ 2” & 3” Deadbolt Mounting Screws
• Deadbolt Strike Plate
• Extended Door Thickness: 21⁄ 8”- 27⁄ 8”
Extended Components:
• Long Double Cylinder Tailpieces
• 3” & 31⁄ 2” Deadbolt Mounting Screws
• Deadbolt Strike Plate
Lost Wax Cast Bronze Deadbolts, Single Cylinder
Octagon (8460), Art Nouveau (8470), #11 Style (8472), #14 Style (8473)
• Standard Door Thickness: 13⁄ 8”- 21 ⁄ 4”
Standard Components:
• Single Cylinder Tailpiece
• 21⁄ 2” & 3” Deadbolt Mounting Screws
• Deadbolt Strike Plate
• Extended Door Thickness: 21⁄ 4”- 3”
Extended Components:
• Long Single Cylinder Tailpiece
• 3” & 31⁄ 2” Deadbolt Mounting Screws
• Deadbolt Strike Plate
Lost Wax Cast Bronze Deadbolts, Double Cylinder
Octagon (8360), Art Nouveau (8370), #11 Style (8372), #14 Style (8373)
• Standard Door Thickness: 13⁄ 4”- 23⁄ 8”
Standard Components:
• Double Cylinder Tailpieces
• 21⁄ 4” & 21⁄ 2”Deadbolt Mounting Screws
• Deadbolt Strike Plate
C3
• Extended Door Thickness: 23⁄ 8”- 3”
Extended Components:
• Long Double Cylinder Tailpieces
• 3” & 31⁄ 2” Deadbolt Mounting Screws
• Deadbolt Strike Plate
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
Tel: 800.356.2741 Fax: 800.577.5771
www.emtek.com
LOST WAX CAST BRONZE - Deadbolt Strike Plates
Bronze Single-Sided Deadbolts
Tuscany (8456)* & Tuscany Classic (8471), Octagon (8460),
• Extended Door Thickness: 23⁄ 8- 23⁄ 4”
Extended Components:
• Long Single Cylinder Tailpiece
• 21⁄ 4” Deadbolt Mounting Screws
• Deadbolt Strike Plate
• Standard Door Thickness: 13⁄ 8”- 2”
Standard Components:
• Single Cylinder Tailpiece
• 13⁄ 4” Deadbolt Mounting Screws
• Deadbolt Strike Plate
• Extended Door Thickness: 27⁄ 8”- 33⁄ 8
Extended Components:
• Extra Long Single Cylinder Tailpiece
• 21⁄ 2” & 3” Deadbolt Mounting Screws
• Deadbolt Strike Plate
* Part # DB4-TUSDBRG Available for 13 ⁄ 8” Thick Doors
Bronze Single-Sided Deadbolts
#11 Style (8472)*, #14 Style (8473)
• Standard Door Thickness: 13⁄ 4”- 2”
Standard Components:
• Single Cylinder Tailpiece
• 13⁄ 4” Deadbolt Mounting Screws
• Deadbolt Strike Plate
• Extended Door Thickness: 23⁄ 8- 23⁄ 4”
Extended Components:
• Long Single Cylinder Tailpiece
• 21⁄ 4” Deadbolt Mounting Screws
• Deadbolt Strike Plate
• Extended Door Thickness: 27⁄ 8”- 33⁄ 8
Extended Components:
• Extra Long Single Cylinder Tailpiece
• 21⁄ 2” & 3” Deadbolt Mounting Screws
• Deadbolt Strike Plate
Deadbolt Strike Plates
Standard
Heavy Duty
Steel Understrike
Heavy Duty
Full Lip Deadbolt
Understrike
TS-DB REV17A
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
Tel: 800.356.2741 Fax: 800.577.5771
06/15/2017
www.emtek.com
C4
DEADBOLTS - WROUGHT STEEL
#1 Style Deadbolt
13⁄ 8”
37⁄ 16”
3 5⁄ 8”
2 1⁄ 2”
Exterior Trim (8461)
• Projection is 5⁄ 8”
• 8361 same on both sides
Interior Trim (8461)
• Projection is 11 ⁄ 4”
• Thickness is 1⁄ 4”
29⁄ 16”
#2 Style Deadbolt
23⁄ 8” Dia.
23⁄ 8” Dia.
Exterior Trim (8452)
• Projection is 23⁄ 8”
• 8350 same on both sides
Interior Trim (8452)
• Projection is 11 ⁄ 4”
• Thickness is 1⁄ 4”
#3 Style Deadbolt
31⁄ 2”
3 1⁄ 2”
Interior Trim (8463)
• Projection is 11 ⁄ 4”
• Thickness is 1⁄ 4”
Exterior Trim (8463)
• Projection is 21⁄ 2”
• 8363 same on both sides
2 1⁄ 2”
2 1⁄ 2”
D1
D1
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
Tel: 800.356.2741 Fax: 800.577.5771
www.emtek.com
WROUGHT STEEL - Door Thickness Specifications
Wrought Steel #2 Style Deadbolt, Single Cylinder (8352)
• Standard Door Thickness: 13⁄ 8”- 2”
Standard Components:
• Single Cylinder Tailpiece
• 21⁄ 4” Deadbolt Mounting Screws
• Deadbolt Strike Plate
• Extended Door Thickness: 2”- 23⁄ 4”
Extended Components:
• Long Single Cylinder Tailpiece
• 21⁄ 2” & 3” Deadbolt Mounting Screws
• Deadbolt Strike Plate
• Extended Door Thickness: 23⁄ 4”- 3”
Extended Components:
• Extra Long Single Cylinder Tailpiece
• 31⁄ 2” Deadbolt Mounting Screws
• Deadbolt Strike Plate
Wrought Steel #2 Style Deadbolt, Double Cylinder (8350)
• Standard Door Thickness: 13⁄ 8”- 2”
Standard Components:
• Long Double Cylinder Tailpieces
• 21⁄ 2” & 3” Deadbolt Mounting Screws
• Deadbolt Strike Plate
• Extended Door Thickness: 17⁄ 8”- 21⁄ 2”
Extended Components:
• Long Double Cylinder Tailpieces
• 3” & 31⁄ 2” Deadbolt Mounting Screws
• Deadbolt Strike Plate
Wrought Steel #1 & #3 Style Deadbolt, Single Cylinder (8461 & 8463)
• Standard Door Thickness: 13⁄ 4”- 21⁄ 8
Standard Components:
• Single Cylinder Tailpiece
• 21⁄ 4” Deadbolt Mounting Screws
• Deadbolt Strike Plate
• Extended Door Thickness: 21⁄ 8- 27⁄ 8”
Extended Components:
• Long Single Cylinder Tailpiece
• 21⁄ 2” & 3” Deadbolt Mounting Screws
• Deadbolt Strike Plate
• Extended Door Thickness: 27⁄ 8”- 33⁄ 8
Extended Components:
• Extra Long Single Cylinder Tailpiece
• 31⁄ 2” Deadbolt Mounting Screws
• Deadbolt Strike Plate
Wrought Steel #1 & #3 Style Deadbolt, Double Cylinder (8361 & 8363)
• Standard Door Thickness: 13⁄ 4”- 21⁄ 8
Standard Components:
• Double Cylinder Tailpieces
• 21⁄ 4” Deadbolt Mounting Screws
• Deadbolt Strike Plate
• Extended Door Thickness: 21⁄ 8- 27⁄ 8”
Extended Components:
• Long Double Cylinder Tailpieces
• 21⁄ 2” & 3" Deadbolt Mounting Screws
• Deadbolt Strike Plate
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
Tel: 800.356.2741 Fax: 800.577.5771
www.emtek.com
D2
WROUGHT STEEL - Deadbolt Strike Plates
Wrought Steel Single-Sided Deadbolts
#2 Style (8452)
• Extended Door Thickness: 23⁄ 8- 23⁄ 4”
Extended Components:
• Long Single Cylinder Tailpiece
• 21⁄ 4” Deadbolt Mounting Screws
• Deadbolt Strike Plate
• Standard Door Thickness: 13⁄ 8”- 2
Standard Components:
• Single Cylinder Tailpiece
• 13⁄ 4” Deadbolt Mounting Screws
• Deadbolt Strike Plate
• Extended Door Thickness: 27⁄ 8”- 33⁄ 8
Extended Components:
• Extra Long Single Cylinder Tailpiece
• 21⁄ 2” & 3” Deadbolt Mounting Screws
• Deadbolt Strike Plate
Wrought Steel Single-Sided Deadbolts
#1 Style (8461), #3 Style (8463),
• Standard Door Thickness: 13⁄ 4”- 21⁄ 8
Standard Components:
• Single Cylinder Tailpiece
• 13⁄ 4” Deadbolt Mounting Screws
• Deadbolt Strike Plate
• Extended Door Thickness: 23⁄ 8- 23⁄ 4”
Extended Components:
• Long Single Cylinder Tailpiece
• 21⁄ 4” Deadbolt Mounting Screws
• Deadbolt Strike Plate
• Extended Door Thickness: 27⁄ 8”- 33⁄ 8
Extended Components:
• Extra Long Single Cylinder Tailpiece
• 21⁄ 2” & 3” Deadbolt Mounting Screws
• Deadbolt Strike Plate
Deadbolt Strike Plates
Standard
Heavy Duty
Steel Understrike
Heavy Duty
Full Lip Deadbolt
Understrike
TS-DB REV17A
D3
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
Tel: 800.356.2741 Fax: 800.577.5771
06/15/2017
www.emtek.com