Hydroseeding Products

Hydroseeding
Products
135
Hydroseeding Products
Flexterra® HP-FGM™ 22.68 kg bales
Flexible Growth Medium™
Steep slope and high rainfall rating hydromulch
Also described as a “spray on hydro blanket”, this product is designed for the most
critical slopes (short of permanent materials). Flexterra® HP-FGM™ contains superior
tackifiers which means it binds directly to the soil upon application (can be applied
in rain). Flexterra® HP-FGM™ can grow vegetation 8 times faster than bare soil and
twice as fast as traditional rolled erosion control blankets. Proven to be 99% effective
in US tests against erosion and soil loss. Although BFM’s (Bonded Fiber Matrix)
have their place, Flexterra® HP-FGM™ is engineered for much tougher sites and
environmental conditions.
Application Rates
3:1 Slope 2:1 Slope 1:1 Slope 3360 kg/ha (10,000 m²)
4480 kg/ha (10,000 m²)
5050 kg/ha (10,000 m²)
33.6 kg per 100 m²
44.8 kg per 100 m²
50.50 kg per 100 m²
Conwed 2000
Hydromulch 22.68 kg bales
Hydromulching for general seeding
• Contains 100% of the highest quality wood fibre
• Contains premium pre-blended organic gum tackifier
• Eliminates extra step of field blending in tackifier
Application Rates
2.5:1 Slope
2:1 to 1:1 Slope 2240 kg/ha (10,000 m²) 2800 kg/ha (10,000 m²) 22.4 kg per 100 m²
28 kg per 100 m²
Conwed 1000
Hydromulch 22.68 kg bales
Hydromulching for general seeding
• Contains 100% of the highest quality wood fibre
• Contains Slikshot™ for better yield, shooting and ground cover
Application Rates
4:1 Slope
3:1 Slope 2:1 Slope
1600 kg/ha (10,000 m²) 2240 kg/ha (10,000 m²) 2800 kg/ha (10,000 m²) 16 kg per 100 m²
22.4 kg per 100 m²
28 kg per 100 m²
136
pggwrightsonturf.co.nz
Hydroseeding Products
Conwed Cellulose
Hydromulch 22.68 kg bales
Hydromulching for general seeding
• High quality, clean 100% cellulose fibre
• Darker green colour gives your work a professional look once applied
• Cost effective mulch for general use
Application Rates
Modest to 4:1 Slope 4:1 Slope 1600 kg/ha (10,000 m²) 2240 kg/ha (10,000 m²) 16 kg per 100 m²
22.4 kg per 100 m²
Jet Spray™ Pourable Hydromulch
with Fibermax™ 18.1 kg bag
Hydromulch for use in jet agitated machines
• Pourable mulch designed for the smaller openings of jet agitated machines
• A blend of 76% cellulose (paper) content, 20% wood fibre content, 3% Fibermax™
(locking fibres) plus 1% flocculant tackifier
• New flocculating tackifier helps to increase yield and gives greater ‘loft’ for more
water holding capacity and a stronger bond
Application Rates
Modest Slope 4:1 3:1 Slope 3:1-2:1 Slope
2240 kg/ha (10,000 m2)
2800 kg/ha (10,000 m2)
3360 kg/ha (10,000 m2)
22.4 kg per 100 m²
28 kg per 100 m²
33.6 kg per 100 m²
BioCover™ Daily Landfill Cover
BioCover™ Alternative Daily Cover (ADC) is a hydraulically applied product
manufactured from Thermally Refined® wood fibres combined with cellulose fibre
and a viscous hydro-colloid tackifier. Upon application, it forms a uniform layer
between waste and the surrounding environment. Less expensive than other
alternative covers and easier to apply, BioCover™ is the superior alternative to soil,
mulch or plastic daily covers.
Application Rates
1 x 22.68 kg bag per 125 m2. Talk to your PGW Turf Representative for further
application details.
137
pggwrightsonturf.co.nz
Hydroseeding Products
Floc Lock
4.97 kg bottle
•
•
Increases the chemical bond in all fibre mulches while increasing the water
holding capacity of all mulches
Reduces friction in the hose and increases shooting distances
Application Rates
Fibre mulch binding
Modest to 4:1 slope 12.5 kg/ha (10,000 m2)
125 g per 100 m²
Tack 3
11.34 kg bag
•
•
•
Tack 3 is a blend of tackifiers which require no cure time
For use on critical sites
For blending with other mulch mediums to increase the mulch’s ability to bind
to the soil surface
Application Rates
Mulch Binding
6:1 to 4:1 Slope
4:1 to 2:1 Slope
2:1 to 1:1 Slope
> 1:1 Slope
22.5 kg/ha (10,000 m2)
34 kg/ha (10,000 m2)
45 kg/ha (10,000 m2)
68 kg/ha (10,000 m2)
225 g per 100 m2
340 g per 100 m2
450 g per 100 m2
680 g per 100 m2
138
pggwrightsonturf.co.nz
Hydroseeding Products
Bowie Hydroseeding Machines
Hydro-Mulcher®, HydroSeeder™, Hydrograsser™ or hydraulic planter, whatever you choose to call them, these
versatile machines are used to quickly seed large areas for erosion control or reclamation. The same hydromulchers
are also used to plant high quality turfgrasses for residential, commercial, golf and sportsfield uses.
Bowie 300 Hydro-Mulcher®
This piece of equipment is a wise selection for the small seeding and touch-up jobs. It is simple to use and easy to
move into tight places.
Bowie Lancer 500 and 600 Hydro-Mulcher®
Bowie’s 500 is used for the rapid application of hydromulch on residential lawns, new construction developments
and a multitude of smaller seeding projects. Bowie’s 600 allows you to apply your product either from the working
platform using the discharge cannon or from the ground with a hose. Available as either a skid or trailer mounted unit.
Bowie Victor 800 and 1100 Hydro-Mulcher®
The low maintenance, ease of use and high productivity of the 800 series of hydromulchers make it a smart choice.
With the 1100, you can go up to 600 pounds of mulch per tank load and spray with a hose or from the deck using
the ergonomic discharge cannon. Available as a trailer, gooseneck or skid model.
Bowie Imperial 1500 and 3000 Hydro-Mulcher®
The large capacity tank along with the super strong agitation brings the large seeding jobs down to size in short
order. Let the muscle of the 1500 work for you. The choice for maximum production, efficiency, and dependability.
The agitation is smooth and strong throughout the power range making for less fatigue on the equipment and
operator.
139
pggwrightsonturf.co.nz
Notes
140
pggwrightsonturf.co.nz